Planting Anion Channels in a Negatively Charged Polyamide Layer for Highly Selective Nanofiltration Separation.

A nanofiltration (NF) membrane with high salt permeation and high retention of small organics is appealing for the treatment of high-salinity organic wastewater. However, the conventional negatively charged NF membranes commonly show high retention of divalent anions (e.g., SO42-), and the reported positively charged NF membranes normally suffer super low selectivity for small organics/Na2SO4 and high fouling potential. In this work, we propose a novel "etching-swelling-planting" strategy assisted by interfacial polymerization and mussel-inspired catecholamine chemistry to prepare a mix-charged NF membrane. By X-ray photoelectron spectroscopy depth profiling and pore size distribution analysis, it was found that such a strategy could not only deepen the positive charge distribution but also narrow the pore size. Molecular dynamics confirm that the planted polyethyleneimine chains play an important role to relay SO42- ions to facilitate their transport across the membrane, thus reversing the retention of Na2SO4 and glucose (43 vs 71%). Meanwhile, due to the high surface hydrophilicity and smoothness as well as the preservation of abundant negatively charged groups (-OH and -COOH) inside the separation layer, the obtained membrane exhibited excellent antifouling performance, even for the coking wastewater. This study advances the importance of vertical charge distribution of NF membranes in separation selectivity and antifouling performance.

Developing a sustainable process for the cleaner production of baker's yeast: An approach towards waste management by an integrated fermentation and membrane separation process.

Baker's yeast industries generate highly polluted effluents, especially the cell free broth (i.e., vinasse) characterized by high chemical oxygen demand, nitrogen, and salts. In this work, it was found that the residual by-products (i.e., ethanol and acetic acid) and salts in the vinasse severely inhibited the cell growth, which hindered the reuse of the vinasse for the production of Saccharomyces cerevisiae. Through optimizing a suitable control strategy, the productions of ethanol and acetic acid were eliminated. Then, a nanofiltration membrane (i.e., NF5) was preferred for preliminarily and simultaneously separating and concentrating valuable molecules (i.e., invertase, food grade proteins and pigments) in the vinasse, and the main fouling mechanism was cake layer formation. Subsequently, a reverse osmosis membrane (RO) was suitable to separate and concentrate salts in the NF5 permeate, where the membrane fouling was negligible. Finally, the RO permeate was successfully reused for the production of S. cerevisiae. In addition, without calculating the benefit from the recovery of the valuable molecules, the cost of the integrated process can be decreased by 59.8% compared with the sole triple effect evaporation. Meanwhile, the volume of the fresh water used in the fermentation process can be decreased by 68.8%. Thus, it is a sustainable process for the cleaner production of baker's yeast using the integrated fermentation and membrane separation process.

Effectively Converting Cane Molasses into 2,3-Butanediol Using Clostridiumljungdahlii by an Integrated Fermentation and Membrane Separation Process.

Firstly, 2,3-butanediol (2,3-BDO) is a chemical platform used in several applications. However, the pathogenic nature of its producers and the expensive feedstocks used limit its scale production. In this study, cane molasses was used for 2,3-BDO production by a nonpathogenic Clostridium ljungdahlii. It was found that cane molasses alone, without the addition of other ingredients, was favorable for use as the culture medium for 2,3-BDO production. Compared with the control (i.e., the modified DSMZ 879 medium), the differential genes are mainly involved in the pathways of carbohydrate metabolism, membrane transport, and amino acid metabolism in the case of the cane molasses alone. However, when cane molasses alone was used, cell growth was significantly inhibited by KCl in cane molasses. Similarly, a high concentration of sugars (i.e., above 35 g/L) can inhibit cell growth and 2,3-BDO production. More seriously, 2,3-BDO production was inhibited by itself. As a result, cane molasses alone with an initial 35 g/L total sugars was suitable for 2,3-BDO production in batch culture. Finally, an integrated fermentation and membrane separation process was developed to maintain high 2,3-BDO productivity of 0.46 g·L-1·h-1. Meanwhile, the varied fouling mechanism indicated that the fermentation properties changed significantly, especially for the cell properties. Therefore, the integrated fermentation and membrane separation process was favorable for 2,3-BDO production by C. ljungdahlii using cane molasses.

Fermentative Production of Fructo-Oligosaccharides Using Aureobasidium pullulans: Effect of Dissolved Oxygen Concentration and Fermentation Mode.

Fructo-oligosaccharides (FOS) are prebiotics with numerous health benefits. So far, the dissolved oxygen (DO) concentration control strategy for fermentative production of FOS is still unknown. In order to improve FOS production, the effects of DO concentration and fermentation mode on FOS using Aureobasidium pullulans were investigated in this study. The greatest FOS production (123.2 ± 6.2 g/L), with a yield of 61.6% ± 3.0% (g FOS/g sucrose), was obtained in batch culture under high DO concentration. Furthermore, repeated-batch culture revealed that enzyme production and FOS production were not closely associated with cell growth. By keeping the DO concentration above 5% in the repeated-batch culture, a maximum FOS concentration of 548.3 ± 37.4 g/L and yield of 68.6% ± 2.6% (g FOS/g sucrose) were obtained, which were 3.45% and 11.4% times higher than those obtained in the batch culture without DO control, respectively. Additionally, the ratios of 1-fructofuranosyl nystose (GF4) and 1,1,1,1-kestohexose (GF5) were 33.8% and 23.2%, respectively, in the product of repeated-batch culture, but these compounds were not detected in batch culture. Thus, it can be concluded that the DO concentration affects not only the yield of FOS but also the composition of FOS with different degrees of polymerization, which is the key factor in the fermentative production of FOS with a high polymerization degree.

A sustainable pH shift control strategy for efficient production of ß-poly(L-malic acid) with CaCO3 addition by Aureobasidium pullulans ipe-1.

ß-poly(L-malic acid) (PMLA) has attracted industrial interest for its potential applications in medicine and other industries. For a sustainable PMLA production, it requires replacing/reducing the CaCO3 usage, since the residual CaCO3 impeded the cells' utilization, and a large amount of commercially useless gypsum was accumulated. In this study, it was found that more glucose was converted into CO2 using soluble alkalis compared with CaCO3 usage. Moreover, since the high ion strength and respiration effect of soluble alkalis also inhibited PMLA production, they could not effectively replace CaCO3. Furthermore, comparing the fermentations with different neutralizers (soluble alkali vs. CaCO3), it was found that the differential genes are mainly involved in the pathway of starch and sucrose metabolism, pentose and glucuronate interconversions, histidine metabolism, ascorbate and aldarate metabolism, and phagosome. In detail, in the case with CaCO3, 562 genes were downregulated and 262 genes were upregulated, and especially, those genes involved in energy production and conversion were downregulated by 26.7%. Therefore, the irreplaceability of CaCO3 was caused by its effect on the PMLA metabolic pathway rather than its usage as neutralizer. Finally, a combined pH shift control strategy with CaCO3 addition was developed. After the fermentation, 64.8 g/L PMLA and 38.9 g/L biomass were obtained with undetectable CaCO3 and less CO2 emission. KEY POINTS: • The effect of CaCO3 on PMLA metabolic pathway resulted in its irreplaceability. • A pH shift control strategy with CaCO3 addition was developed. • Undetectable CaCO3 and less CO2 emission were detected with the new strategy. Graphical abstract.

Biocatalytic Membrane Based on Polydopamine Coating: A Platform for Studying Immobilization Mechanisms.

Application of biocatalytic membrane is promising in food, pharmaceutical, and water treatment industries, whereas enzyme immobilization is the key step of biocatalytic membrane preparation. Thus, how to minimize the negative effect of immobilization on enzyme performance is required to answer. In this work, we proposed a platform for biocatalytic membrane preparation and immobilization mechanism investigation based on polydopamine (PDA) coating, which was demonstrated by immobilizing five commonly used enzymes (laccase, glucose oxidase, lipase, pepsin, and dextranase) on three commercially available membranes via three immobilization mechanisms (electrostatic attraction, covalent bonding, and hydrophobic adsorption), respectively. By examining the enzyme loading, activity, and kinetics under different immobilization mechanisms, we found that except for dextranase, enzyme immobilization via electrostatic attraction retained the most activity, whereas covalent bonding and hydrophobic adsorption were detrimental to enzyme conformation. Enzyme immobilization via covalent bonding ensured a high enzyme loading, and hydrophobic adsorption was only suitable for lipase and dextranase immobilization. Moreover, the properties of functional groups around the enzyme active center should be considered for the selection of suitable immobilization strategy (i.e., avoid covering the active center by membrane carrier). This work not only established a versatile platform for biocatalytic membrane preparation but also provided a novel methodology to evaluate the effect of immobilization mechanisms on enzyme performance.

Simultaneous decolorization and deproteinization of α,ω-dodecanedioic acid fermentation broth by integrated ultrafiltration and adsorption treatments.

α,ω-Dicarboxylic acids (DC) are versatile chemical intermediates with different chain length. For biosynthesis of DC, to obtain the highly pure product via crystallization, it is required to remove pigments and proteins in fermentation broth. However, a trade-off between decolorization/deproteinization ratio and DC recovery during the purification process was found, which impeded DC production by fermentation. When ultrafiltration (UF) was applied to treat α,ω-dodecanedioic acid (DC12) broth, 93.4% of DC12 recovery, 80.5% of decolorization ratio and 61.7% of deproteinization ratio were achieved by a PES 3 membrane. However, the membrane technology could not effectively retain the pigments or proteins with low molecular weight when a high DC12 permeation was required. Meanwhile, the selected activated charcoal or macroporous resins were not good adsorbents for the present system. Furthermore, an integrated process for decolorization and deproteinization was developed. After filtration with PES3 membrane, an activated charcoal was used to remove the small proteins and pigments in the UF permeate. As a result, 91.4% of DC12 recovery, 94.7% of decolorization ratio and 84.8% of deproteinization ratio were obtained by such two-stage strategy. These results would serve as a valuable guide for process design and practical operation in subsequent industrial application.

High-level productivity of α,ω-dodecanedioic acid with a newly isolated Candida viswanathii strain.

α,ω-Dicarboxylic acids (DC) are versatile chemical intermediates with different chain lengths, which are well-known as polymer building block. In this work, a new strain with high productivity of DC was isolated from oil-contaminated soil. Based on the morphology and phylogenetic analyses of the internal transcribed spacer sequences, it was characterized as Candida viswanathii. It was found that the contribution of carbon flux to the cell growth and DC production from n-dodecane could be regulated by the sucrose and yeast extract concentrations in the medium, and besides the broth pH, a suitable proportioning of sucrose and yeast extract was the key to achieve the optimal transition from cell growth phase to DC production phase. By optimizing culture conditions in a 7.5-L bioreactor, a higher DC productivity of 1.59 g·L-1 h-1 with a corresponding concentration of 181.6 g/L was obtained. After the purification of DC from the culture, the results from gas chromatography-mass spectrometry, infrared spectroscopy and 1H-NMR showed that α,ω-dodecanedioic acid (DC12) was the major product of C. viswanathii ipe-1 using pure n-dodecane as substrate. For the first time, we reported that a high productivity of DC12 could be produced by C. viswanathii.

Enhancing singlet oxygen production of dioxygen activation on the carbon-supported rare-earth oxide nanocluster and rare-earth single atom catalyst to remove antibiotics.

Singlet oxygen (1O2) is extensively employed in the fields of chemical, biomedical and environmental. However, it is still a challenge to produce high- concentration 1O2 by dioxygen activation. Herein, a system of carbon-supported rare-earth oxide nanocluster and single atom catalysts (named as RE2O3/RE-C, RE=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Sc and Y) with similar morphology, structure, and physicochemical characteristic are constructed to activate dissolved oxygen (DO) to enhance 1O2 production. The catalytic activity trends and mechanisms are revealed experimentally and are also proven by theoretical analyses and calculations. The 1O2 generation activity trend is Gd2O3/Gd-C>Er2O3/Er-C>Sm2O3/Sm-C>pristine carbon (C). More than 95.0% of common antibiotics (ciprofloxacin, ofloxacin, norfloxacin and carbamazepine) can be removed in 60 min by Gd2O3/Gd-C. Density functional theory calculations indicate that Gd2O3 nanoclusters and Gd single atoms exhibit the moderate adsorption energy of ·O2- to enhance 1O2 production. This study offers a universal strategy to enhance 1O2 production in dioxygen activation for future application and reveals the natural essence of basic mechanisms of 1O2 production via rare-earth oxide nanoclusters and rare-earth single atoms.

What are exposure biomarkers of rare earth elements for the ionic rare earth occupational population?

Rare earth elements (REEs) are widely utilized in industries. However, The specific exposure features of REEs and potential biomarkers of exposure in occupational populations remain unclear. In this study, we evaluated the external and internal REEs exposure levels among the participants working in the ionic rare earth smelting plant. For the external exposure, the concentrations of 14 REEs and total rare earth elements (ΣREEs) in airborne particles were significantly elevated in the REEs-exposed versus non-exposed group (P < 0.05). Meanwhile, the levels of Yttrium (Y), Gadolinium (Gd), Terbium (Tb), Dysprosium (Dy), Holmium (Ho), Thulium (Tm), Ytterbium (Yb), and ΣREEs in urine were higher in the REEs-exposed group compared to the non-exposed group (P < 0.05). Notably, a significant positive correlation was observed between Y in both the airborne particles and urine samples as well as Gd, and the Spearman correlation coefficient was 0.53 and 0.39 respectively, both P < 0.05. Conversely, no statistically significant differences were found in the levels of 15 REEs or ΣREEs in the blood samples between the REEs-exposed group and non-exposed group. Moreover, the concentrations of ΣREEs and 9 REEs in nail samples of the exposed group were significantly higher than those of the non-exposed group (P < 0.05), and the composition ratios of REEs in the nail samples closely resembled those found in individual airborne particles. Therefore, nail and urine samples were proposed to reflect long-term and short-term exposure to ionic rare earth respectively. Exposure biomarkers confirmed by external and internal exposure characteristics accurately provide the situation of human exposure to REEs environment, and have profound significance for monitoring and evaluating the level of REEs pollution in human body. It also provides a vital basis to find out the effect biomarkers, susceptible biomarkers and the health effects of rare earth environment for the future research.

An Eu (III)-functionalized covalent organic framework fluorescent probe for specific detection of Flumequine based on pore restriction and antenna effect.

The overuse of quinolone antibiotics has led to a series of health and environmental issues. Herein, we combine the distinct luminescence properties of Eu3+ with the unique structure of covalent organic frameworks (COFs) to develop a precise and sensitive fluorescent probe for detecting Flumequine (Flu) in water. Eu3+ is thoroughly anchored into the channels of COFs as recognition sites, while the synthesized probe material still maintains its intact framework structure. The unique structure of COFs provides excellent support and protection for Eu3+. Therefore, COF-Eu can rapidly bind with Flu which can transfer the absorbed energy to Eu3+ through an "antenna effect", resulting in red fluorescence. Moreover, there is a good linear relationship between Flu concentration in the range of 0-30 µM, with a detection limit of 41 nM. Simultaneously, the material maintains remarkable reproducibility, with its performance remaining almost unchanged after five cycles of use. Remarkably, the probe demonstrates excellent Flu recovery rates in real samples. This study provides a viable approach for the recognition of flumequine in the environment through a customized fluorescence detection method.

High-solids enzymatic saccharification of starch-rich raw herbal biomass residues for producing high titers of glucose.

The bioresource utilization of herbal biomass residues (HBRs) has been receiving more attention. Herein, three different HBRs from Isatidis Radix (IR) and Sophorae Flavescentis Radix (SFR) and Ginseng Radix (GR) were subjected to batch and fed-batch enzymatic hydrolysis to produce high-concentration glucose. Compositional analysis showed the three HBRs had substantial starch content (26.36-63.29%) and relatively low cellulose contents (7.85-21.02%). Due to their high starch content, the combined action of cellulolytic and amylolytic enzymes resulted in greater release of glucose from the raw HBRs compared to using the individual enzyme alone. Batch enzymatic hydrolysis of 10% (w/v) raw HBRs with low loadings of cellulase (≤ 10 FPU/g substrate) and amylolytic enzymes (≤ 5.0 mg/g substrate) led to a high glucan conversion of ≥ 70%. The addition of PEG 6000 and Tween 20 did not contribute to glucose production. Furthermore, to achieve higher glucose concentrations, fed-batch enzymatic hydrolysis was conducted using a total solid loading of 30% (w/v). After 48-h of hydrolysis, glucose concentrations of 125 g/L and 92 g/L were obtained for IR and SFR residues, respectively. GR residue yielded an 83 g/L glucose concentration after 96 h of digestion. The high glucose concentrations produced from these raw HBRs indicate their potential as ideal substrate for a profitable biorefinery. Notably, the obvious advantage of using these HBRs is the elimination of the pretreatment step, which is typically required for agricultural and woody biomass in similar studies.

Cellulose esterification with carboxylic acid in deep eutectic solvent pretreatment inhibits enzymatic hydrolysis.

Avicel cellulose was pretreated using two commonly used carboxylic acid-based deep eutectic solvents, i.e., choline chloride-lactic acid and choline chloride-formic acid. The pretreatment process resulted in the formation of cellulose esters with lactic acid and formic acid, which was confirmed by infrared and nuclear magnetic resonance spectra. Surprisingly, the esterified cellulose led to a significant decrease in the 48-h enzymatic glucose yield (≥75%) compared to raw Avicel cellulose. Analysis of changes in cellulose properties caused by pretreatment, including crystallinity, degree of polymerization, particle size and cellulose accessibility, contradicted the observed decline in enzymatic cellulose hydrolysis. However, removing the ester groups through saponification largely recovered the reduction in cellulose conversion. The decreased enzymatic cellulose hydrolysis by esterification may be attributed to changes in the interaction between cellulose-binding domain of cellulase and cellulose. These findings provide valuable insights into improving the saccharification of lignocellulosic biomass pretreated by carboxylic acid-based DESs.

Green process for isolation and purification of poly(ß-L-malic acid) from Aureobasidium spp. by an integrated ion exchange and membrane separation.

Poly (ß-L-malic acid) (PMLA) is a biopolymer used in food and medical fields. However, the industrial processes are susceptible to the pollution of CaSO4 waste and organic solvent owing to the heavy use of CaCO3 in fermentation process and organic solvents in isolation process. This study developed an organic solvent and CaSO4 -free process for the industrial-scale production of PMLA. Firstly, calcium ion was removed at pH 9.2 by pH adjustment with Na2CO3, and the generated CaCO3 was reused in the fermentation process. Then, the D296 resin was selected to isolate the PMLA from the Ca2+-free broth, where the adsorption data were both primely described by the Freundlich and Langmuir equation, while Freundlich model better fit the process than Langmuir equation, indicating that it was non-monolayer adsorption of PMLA on the resin. Meanwhile, a three-step gradient elution with phosphate buffer (i.e., 0.2 mol/L, pH 7.0) containing 0.1, 0.2 and 1 mol/L NaCl was developed to recover PMLA. Finally, a PES15 membrane was selected to recover the PMLA from the elution solution, which could be reused in the next cycle. As a result, the PMLA with a purity of 98.89 % was obtained with the developed green process. In the developed process, it removed the pollution of organic solvent and calcium waste for the biosynthesis of PMLA on an industrial scale, which also offers a sustainable and green route for the biosynthesis of other carboxylic acids.

Preparation of Yb-Sb co-doped Ti/SnO2 electrode for electrocatalytic degradation of sulfamethoxazole (SMX).

To efficiently break down residual sulfonamide antibiotics in environmental water, Yb-Sb co-doped Ti/SnO2 electrodes were fabricated using a solvothermal method. The effect of different amounts of Yb doping on the properties of the electrodes was studied. When the atom ratio of Sn: Yb is 100 : 7.5 in the preparation, the as-obtained coral-like electrodes (denoted as Yb 7.5%) possessed the smallest diameter of spherical particles on the surfaces, to result in the denser surface, highest electrocatalytic activity and smallest resistance of the electrode. As anode for electrocatalytic degradation of sulfamethoxazole, the Yb 7.5% electrode showed a degradation rate of 92% in 90 min, which was much higher than that of Yb 0% electrode (62.7% degradation rate). The electrocatalytic degradation of sulfamethoxazole was investigated with varying current densities and initial concentrations. Results indicated that the degradation process followed pseudo-first-order kinetics, and the degradation rate constants for Yb 7.5% and Yb 0% electrodes were 0.0278 min-1 and 0.0114 min-1, respectively. Furthermore, the service life of Ti/SnO2 electrodes was significantly improved after Yb doping, as demonstrated by accelerated life testing. Yb 7.5% exhibited a service life that was 2.7 times longer than that of Yb 0%. This work offers a new approach to construct Yb-Sb co-doped Ti/SnO2 electrodes with excellent electrooxidation activity and high stability for the electrochemical oxidation degradation of sulfamethoxazole.

Fractionation and characterization of poly(ß-L-malic acid) produced by Aureobasidium melanogenum ipe-1.

Poly (ß-L-malic acid) (PMLA) is attracting industrial interest for its potential application in medicine and other industries, whose functions primarily depend upon its molecular size and chemical structure. Up to now, the fractionation and characterization of PMLA produced by Aureobasidium spp. were still unclear. In this study, the product from A. melanogenum ipe-1 was effectively fractionated using 300 and 50 kDa membranes. During the filtration, the mechanisms of membrane fouling were illegible since the PMLA can both reject and permeate the membrane, while the main fouling mechanism varied between standard blocking and complete blocking during the diafiltration. After fractionation, 14.0, 8.4 and 77.6 % of the PMLAs with Mws of 75,134, 21,344 and 10,056 Da were distributed in the 300 kDa retentate after diafiltrating, 50 kDa retentate after diafiltrating, and the 50 kDa permeate, respectively. The Mw/Mns of the PMLAs were 4.12, 1.92, and 1.12 in the three fractions. Based on characteristic spectra of NMR, HPLC and FTIR, the product was not usual L-malic acid monomers, but glucose-terminated PMLA. The glucose was located at the terminal hydroxyl of PMLA. These results would serve as a valuable guide for process design and practical operation in subsequent industrial application.

L-Cys-Assisted Conversion of H2/CO2 to Biochemicals Using Clostridium ljungdahlii.

Carbon fixation and conversion based on Clostridium ljungdahlii have great potential for the sustainable production of biochemicals (i.e., 2,3-butanediol, acetic acid, and ethanol). Here, the effects of reducing agents on the production of biochemicals from H2/CO2 using C. ljungdahlii were studied. It was found that the element S and reducing power could significantly affect the production of biochemicals, and cysteine (Cys) was better than sodium sulfide for the production of biochemicals, especially for the production of 2,3-butanediol. Moreover, comparing to the control (i.e., without the addition of Cys), the gene expression profiles indicated that the fdh and adhE1 were significantly upregulated with the addition of Cys, which involved in pathways of the CO2 fixation and ethanol production. Therefore, the irreplaceability of Cys on the production of biochemicals was both caused by its utilization as a reducing agent and its effect on the metabolic pathway. Finally, compared to the control, the production of 2,3-butanediol was increased by 2.17 times under the addition of 1.7 g/L Cys.

Lanthanide-doped upconversion glass-ceramic photocatalyst fabricated from fluorine-containing waste for the degradation of organic pollutants.

Fluorine-containing waste is one kind of hazardous waste characteristic by hard disposal and utilization, it is an attractive way to prepare for fluoride-based luminescent matrix. In this work, to realize the high value-added utilization of fluorine-containing waste and reduce cost of the raw materials for preparation near-infrared (NIR) glass-ceramic (GC) photocatalyst, the pure fluoride of luminescent matrix was replaced by introducing fluorine-containing waste. The waste contained NIR GC photocatalyst was synthesis by the method of facile in-situ etching of an upconversion GC with HCl, which possesses core-shell structure, where the GC micro-powder including optically active centers lanthanides doped CaF2 nanocrystals are displayed as the core, and the BiOCl is as the superficial coating. The upconversion emission performance of CaF2 based luminescent matrix in photocatalyst is not weakened with HCl etching. NIR GC photocatalyst has high methyl orange and enrofloxacin degradation rate of 86 % and 82 % over 180 min after NIR light irradiation, respectively. The UV-Vis-NIR photocatalytic activity was enhanced degradation rate (93 % in 15 min) of enrofloxacin compared with those of commercial P25 and BiOCl. In addition, the photocatalyst had stable photocatalytic activity and it also can be regenerated. The study provided references for high value-added utilization fluorine-containing waste.

Enhanced selective separation of vanadium(V) and chromium(VI) using the CeO2 nanorod containing oxygen vacancies.

Adsorption of vanadium from wastewater defends the environment from toxic ions and contributes to recover the valuable metal. However, it is still challenging for the separation of vanadium (V5+) and chromium (Cr6+) because of their similar properties. Herein, a kind of CeO2 nanorod containing oxygen vacancies is facilely synthesized which displays ultra-high selectivity of V5+ against various competitive ions (i.e., Fe, Mn, Cr, Ni, Cu, Zn, Ga, Cd, Ba, Pb, Mg, Be, and Co). Moreover, a large separation factor (SFV/Cr) of 114,169.14 for the selectivity of V5+ is achieved at the Cr6+/V5+ ratio of 80 with the trace amount of V5+ (~ 1 mg/L). The results show that the process of V5+ uptake is the monolayer homogeneous adsorption and is controlled by external and intraparticle diffusions. In addition, it also shows that V5+ is reduced to V3+ and V4+ and then formation of V-O complexation. This work offers a novel CeO2 nanorod material for efficient separation of V5+ and Cr6+ and also clarifies the mechanism of the V5+ adsorption on the CeO2 surface.

Intensification of ß-poly(L: -malic acid) production by Aureobasidium pullulans ipe-1 in the late exponential growth phase.

ß-Poly(malic acid) (PMLA) has attracted industrial interest because this polyester can be used as a prodrug or for drug delivery systems. In PMLA production by Aureobasidium pullulans ipe-1, it was found that PLMA production was associated with cell growth in the early exponential growth phase and dissociated from cell growth in the late exponential growth phase. To enhance PMLA production in the late phase, different fermentation modes and strategies for controlling culture redox potential (CRP) were studied. The results showed that high concentrations of produced PMLA (above 40 g/l) not only inhibited PMLA production, but also was detrimental to cell growth. Moreover, when CRP increased from 57 to 100 mV in the late exponential growth phase, the lack of reducing power in the broth also decreased PMLA productivity. PMLA productivity could be enhanced by repeated-batch culture to maintain cell growth in the exponential growth phase, or by cell-recycle culture with membrane to remove the produced PMLA, or by maintaining CRP below 70 mV no matter which kind of fermentation mode was adopted. Repeated-batch culture afforded a high PMLA concentration (up to 63.2 g/l) with a productivity of 1.15 g l(-1) h(-1). Cell-recycle culture also confirmed that PMLA production by the strain ipe-1 was associated with cell growth.