Facile Access to Fabricate Carbon Dots and Perspective of Large-Scale Applications.

Carbon dots (CDs), fluorescent carbon nanoparticles with particle sizes < 10 nm, are constantly being developed for potential large-scale applications. Recently, methods allow CD synthesis to be carried out on large-scale preparation in a controlled fashion are potentially important for multiple disciplines, including bottom-up strategy, top-down method. In this review, the recent progresses in the research of the methods for large-scale production of CDs and their functionalization are summarized. Especially, the methods of CD synthesis, such as large-scale preparation, hydrothermal/solvothermal, microwave-assisted, magnetic hyperthermia microfluidic and other methods, along with functionalization of CDs, are summarized in detail. By promising applications of CDs, there are three aspects have been already reported, such as enhancing mechanical properties, flame retardancy, and energy storage. Also, future development of CDs is prospected.

Fibrous Nanoreactors from Microfluidic Blow Spinning for Mass Production of Highly Stable Ligand-Free Perovskite Quantum Dots.

Nano-/micro-reactors have emerged as a powerful platform for chemical synthesis. Here, we develop fiber-spinning chemistry (FSC) based on a microfluidic blow spinning (MBS) technique, allowing the availability of nanoreactors for chemical synthesis with scale-up capacities. Proof-of-concept experiments focus on the utilization of MBS-derived fibrous nanoreactors for large-scale production of ligand-free perovskite quantum dots (PQDs) in one step. Typically, methylammonium lead halide (MAPbX3 , X=Cl, Br, and I) PQDs in situ synthesized at large scale inside polyacrylonitrile (PAN) nanofiber films (size 120 cm ×30 cm per hour), exhibit high photoluminescence (PL) quantum yield (QY) of 71 %, tunable emissive peaks (448-600 nm), and superb PL stability. The PQDs/polymer nanofiber films are potentially useful for CO2 conversion, wide-color-gamut displays and light-emitting diode (LED) devices. These findings may guide the development of nano-/micro-reactor technology for scale-up production of nanomaterials with various potential applications.

Rapid Fabrication of Patterned Gels via Microchannel-Conformal Frontal Polymerization.

From the perspective of both fundamental and applied science, it is extremely advisable to develop a facile and feasible strategy for fabricating gels with defined structures. Herein, the authors report the rapid synthesis of patterned gels by conducting frontal polymerization (FP) at millimeter-scale (2 mm), where a series of microchannels, including linear-, parallel-, divergent-, snakelike-, circular- and concentric circular channels, were used. They have investigated the effect of various factors (monomer mass ratio, channel size, initiator concentration, and solvent content) on FP at millimeter-scale, along with the propagating rule of the front during FP in these microchannels. In addition, we developed a new microfluidic-assisted FP (MFP) strategy by combining the FP and microfluidic technique. Interestingly, the MFP can realize the production of hollow-structured gel in a rapid and continuous fashion, which have never been reported. Our work not only offers an effective pathway towards patterned gels by the microchannel-conformal FP, but also gives new insight into the continuous production of hollow-structured materials. Such a method will be beneficial for fabricating vessel and scaffold materials in a flexible, easy-to-perform, time and energy saving way.

The Rapid and Large-Scale Production of Carbon Quantum Dots and their Integration with Polymers.

Carbon quantum dots (CDs) have inspired vast interest because of their excellent photoluminescence (PL) performances and their promising applications in optoelectronic, biomedical, and sensing fields. The development of effective approaches for the large-scale production of CDs may greatly promote the further advancement of their practical applications. In this Minireview, the newly emerging methods for the large-scale production of CDs are summarized, such as microwave, ultrasonic, plasma, magnetic hyperthermia, and microfluidic techniques. The use of the available strategies for constructing CD/polymer composites with intriguing solid-state PL is then described. Particularly, the multiple roles of CDs are emphasized, including as fillers, monomers, and initiators. Moreover, typical applications of CD/polymer composites in light-emitting diodes, fluorescent printing, and biomedicine are outlined. Finally, we discuss current problems and speculate on their future development.

Rapid preparation of auto-healing gels with actuating behaviour.

Gels with multiple stimuli-responsive actuating behaviour have shown great potential in many applications. Nevertheless, facile approaches to rapidly preparing gel actuators are still highly needed, and obtaining gels possessing both actuating and auto-healing capabilities remains a challenge. Herein, we report the rapid preparation of gel actuators with a self-healing ability. Dual-component gels, composed of poly(BA-co-VI-co-AM) (G-1) and poly(BA-co-AA-co-AM/ß-CD) (G-2) (BA = butyl acrylate, VI = N-vinyl imidazole, AM = acrylamide, AA = acrylic acid, ß-CD = ß-cyclodextrin), are prepared within 10 minutes (min) via biphase frontal polymerization (FP). Both G-1 and G-2 gels show excellent intrinsic self-healing properties based on hydrogen bonds, with healing efficiencies of 91% and 97%, respectively; self-healing between G-1 and G-2 also occurs due to hydrogen bonding and host-guest interactions. Moreover, dual-component gels, in terms of G-1 and G-2 bilayer gel flowers and strips, heterogeneous healed bilayer gel strips, and microfluidic-directed bilayer gel microsphere ensembles, all show actuating behaviour in acidic, alkaline and organic solutions, with actuation degrees up to 96% in 5 min. The actuation mechanism is also proposed. This work might provide new insights into fast synthesis of self-healing dual-component gels towards application in the actuator field.

Hydrophobic Poly(tert-butyl acrylate) Photonic Crystals towards Robust Energy-Saving Performance.

Photonic crystals (PCs) have been widely applied in optical, energy, and biological fields owing to their periodic crystal structure. However, the major challenges are easy cracking and poor structural color, seriously hindering their practical applications. Now, hydrophobic poly(tert-butyl acrylate) (P(t-BA)) PCs have been developed with relatively lower glass transition temperature (Tg ), large crack-free area, excellent hydrophobic properties, and brilliant structure color. This method based on hydrophobic groups (tertiary butyl groups) provides a reference for designing new kinds of PCs via the monomers with relatively lower Tg . Moreover, the P(t-BA) PCs film were applied as the photoluminescence (PL) enhanced film to enhance the PL intensity of CdSe@ZnS QDs by 10-fold in a liquid-crystal display (LCD) device. The new-type hydrophobic force assembled PCs may open an innovative avenue toward new-generation energy-saving devices.

Effects of the ZnO layer on the structure and white light emission properties of a ZnS:Mn/GaN nanocomposite system.

ZnO films were inserted between the ZnS:Mn films and GaN substrates by pulsed laser deposition (PLD). The structure, morphology, and optical properties of the ZnS:Mn/ZnO/GaN nanocomposite systems have been investigated. X-ray diffraction results show that there are three diffraction peaks located at 28.4°, 34.4°, and 34.1°, which correspond to the ß-ZnS(111), ZnO(002), and GaN(002) planes, respectively. Due to the insertion of ZnO films, the diffraction peak intensity of ZnS:Mn in ZnS:Mn/ZnO/GaN is stronger than that of ZnS:Mn in ZnS:Mn/GaN, and the full width at half-maximum is smaller. Though the transmittance of ZnS:Mn/ZnO films is slightly lower than that of ZnS:Mn films, the transmittance is still higher than 80%. Compared with ZnS:Mn/GaN, an ultraviolet (UV) emission at 387 nm (originated from the near-band emission of ZnO) and a green light emission at about 520 nm appeared in the photoluminescence (PL) spectra of ZnS:Mn/ZnO/GaN, in addition to the blue emission at 435 nm and the orange-red emission at 580 nm. The emission at 520 nm may be related to the deep-level emission from ZnO and the interface of ZnS:Mn/ZnO. The PL spectrum of ZnS:Mn/ZnO/GaN covers the visible region from the blue light to the red light (400-700 nm), and its color coordinate and color temperature are (0.3103,0.3063) and 6869 K, respectively, presenting strong white light emission.

Magnetic-Directed Assembly from Janus Building Blocks to Multiplex Molecular-Analogue Photonic Crystal Structures.

The predictable assembly of colloidal particles into a programmable superstructure is a challenging and vital task in chemistry and materials science. In this work, we develop an available magnetic-directed assembly strategy to construct a series of molecular-analogue photonic crystal cluster particles involving dot, line, triangle, tetrahedron, and triangular bipyramid configurations from solid-liquid Janus building blocks. These versatile multiplex molecular-analogue structural clusters containing photonic band gap, fluorescent, and magnetic information can open a new promising access to a variety of robust hierarchical microstructural particle materials.

Multifunctional Hydrogels with Temperature, Ion, and Magnetocaloric Stimuli-Responsive Performances.

In this work, multifunctional hydrogels with vivid color change and shrinking-swelling response to temperature, ion strength, and alternating magnetic field are fabricated via magnetic assembly. The hydrogels show gradual shift colors from yellowish green to green, cyan, blue, purple, and even reddish violet in response to temperature or ion strength. In the response process, the whole color modulation process is fully reversible and transferable along with a relative short response time. Especially, the magnetism and porous structure of the hybrid hydrogel enable it to be a potential carrier for hydrophobic molecules. Taking advantage of the magnetocaloric responsiveness, the dyed oil loaded hydrogel exhibits a controllable release behavior in each reversible shrinking-swelling cycle under an alternating magnetic field. This multi-responsive hydrogel can hold promise for practical engineering applications, including sensors, displays, and controlled release.

Antineoplastic Activity Comparison of Bovine Serum Albumin--Conjugated Sulfides Semiconductor Nanomaterials.

Although tumor is one of the most frequently occurring diseases and a leading cause of death, nanotechnology, one of the frontier sciences, is exhibiting its great potential to tumor treatments. The aim of this study was to design a facile and environmentally-friendly method to prepare bovine serum albumin-conjugated heavy metal sulfides nano-materials, including Ag2S, PbS and CdS. Here, bovine serum albumin was introduced in order to direct the synthesis of nano-materials by using its template effect and supply more sites for further modification in future. The crystal structure and morphology were analyzed by XRD and TEM, respectively. Additionally, the antineoplastic activity of nano-materials was compared by cell viability analysis, optical and electron microscopy observation after exposure of the human hepatoma cell line. The results showed that the inhibition effect of heavy metal sulfides on tumor cells was in the order of nano-PbS > bulk CdS > nano-Ag2S > nano-CdS > bulk PbS > bulk Ag2S. It could be concluded that heavy metal sulfides had significantly negative impact on human hepatoma cells growth but it could not be obviously generalized that nano-particles were always more effective to kill tumor cells than bulk materials. The size and surface reactivity might be the important factors causing the difference.

Microarrays formed by microfluidic spinning as multidimensional microreactors.

The exploration of methods allowing chemical reactions to be carried out at ultrasmall scales is of great scientific and technological interest. We report herein a microfluidic spinning technique for the fabrication of softened-polymer microarrays for use as multidimensional microreactors and the application of these microreactors in the synthesis of fluorescent nanocrystals. Highly aligned microarrays and controlled-angle grids were readily constructed from microfluidically spun polyvinylpyrrolidone (PVP) microfibers. One-zero dimensional (1D-0D), one-one dimensional (1D-1D), and one-two dimensional (1D-2D) microreactors were then produced by the intersections between microfibers and droplets, crossed microfibers, and microfibers and a PVP film, respectively; each component can be doped with different reagents. Specific examples show that these multidimensional microreactors enable the in situ generation of fluorescent nanocrystals without ligands within minutes.

Species-Specific Seasonal Shifts in Reproductive Allocation in the Southern Grass Lizard, Takydromus sexlineatus (Lacertidae).

We designed a common garden design to collect data on female reproductive traits from three populations of the southern grass lizard Takydromus sexlineatus, testing the hypothesis that a species-specific pattern of seasonal shifts in reproductive allocation should be shared by geographically separated populations. Of the seven examined traits, six differed among populations, with four of the six also differing among successive clutches. Females grew longer during the breeding season and produced more eggs in the first clutch than in the subsequent clutches; egg size was unchanged throughout the breeding season. After removing the influence of female size or postpartum body mass we found the following. First, postpartum body mass, clutch mass, and relative clutch mass were greater in the Wuzhishan population than in the Shaoguan and Zhaoqing populations. Second, egg size was greatest in the Wuzhishan population and smallest in the Zhaoqing population. Third, clutch size was greatest in the Wuzhishan population and smallest in the Shaoguan population. Females did not trade-off egg size against number within each population × clutch combination. Our study validates the hypothesis tested, supports the conventional view that reproductive output is highly linked to maternal body size in lizards, and follows the classic prediction that females with different amounts of resources to invest in reproduction should give priority to adjusting the total number rather than size of their offspring.

In situ synergistic reduced graphene oxide-boron carbon nitride nanosheet heterostructures for high-performance fabric-based supercapacitors.

We develop a new type of heterostructure nanocomposite made of reduced graphene oxide-boron carbon nitride nanosheets (rGO-BCN) by B-C covalent bonds. The rGO-BCN nanocomposite delivers a large specific surface and excellent electrochemical properties, and is then constructed into flexible fabric-based high-performance supercapacitor electrodes based on the microfluidic electrospinning technology.

Optimal dilation duration of 10 mm diameter balloons after limited endoscopic sphincterotomy for common bile duct stones: a randomized controlled trial.

Limited endoscopic sphincterotomy (EST) combined with endoscopic papillary balloon dilation (EPBD) is widely used. However, the optimal duration of small balloon dilation in choledocholithiasis remains controversial. We aimed to determine the optimal duration for 10 mm diameter balloon dilation after limited EST in choledocholithiasis. In this randomized controlled clinical trial, 320 patients were randomly assigned to receive small balloon dilation (10 mm in diameter) for 1 min (n = 160) or 3 min (n = 160) after deep bile duct cannulation. No significant difference in success rate of stone extraction between the two groups was observed. The incidence of post-ERCP pancreatitis (PEP) was higher in the 1 min group (10.6%) than in the 3 min group (4.4%) (P = 0.034). The logistic regression analysis showed that guidewire into the pancreatic duct, cannulation time > 5 min and 1 min balloon dilation were independent risk factors for PEP. There were no significant differences in other post-ERCP adverse events such as acute cholangitis, bleeding, perforation, etc. between the two groups. In conclusion, 3 min in duration was determined to be the optimal dilation condition for the removal of common bile duct stones.

Functional types of long trichoid sensilla responding to sex pheromone components in Plutella xylostella.

Sex pheromones, which consist of multiple components in specific ratios promote intraspecific sexual communications of insects. Plutella xylostella (L.) is a worldwide pest of cruciferous vegetables, the mating behavior of which is highly dependent on its olfactory system. Long trichoid sensilla on male antennae are the main olfactory sensilla that can sense sex pheromones. However, the underlying mechanisms remain unclear. In this study, 3 sex pheromone components from sex pheromone gland secretions of P. xylostella female adults were identified as Z11-16:Ald, Z11-16:Ac, and Z11-16:OH in a ratio of 9.4 : 100 : 17 using gas chromatography - mass spectrometry and gas chromatography with electroantennographic detection. Electrophysiological responses of 581 and 385 long trichoid sensilla of male adults and female adults, respectively, to the 3 components were measured by single sensillum recording. Hierarchical clustering analysis showed that the long trichoid sensilla were of 6 different types. In the male antennae, 52.32%, 5.51%, and 1.89% of the sensilla responded to Z11-16:Ald, Z11-16:Ac, and Z11-16:OH, which are named as A type, B type, and C type sensilla, respectively; 2.93% named as D type sensilla responded to both Z11-16:Ald and Z11-16:Ac, and 0.34% named as E type sensilla were sensitive to both Z11-16:Ald and Z11-16:OH. In the female antennae, only 7.53% of long trichoid sensilla responded to the sex pheromone components, A type sensilla were 3.64%, B type and C type sensilla were both 0.52%, D type sensilla were 1.30%, and 1.56% of the sensilla responded to all 3 components, which were named as F type sensilla. The responding long trichoid sensilla were located from the base to the terminal of the male antennae and from the base to the middle of the female antennae. The pheromone mixture (Z11-16:Ald : Z11-16:Ac : Z11-16:OH = 9.4 : 100 : 17) had a weakly repellent effect on female adults of P. xylostella. Our results lay the foundation for further studies on sex pheromone communications in P. xylostella.

Encodable multiple-fluorescence CdTe@carbon nanoparticles from nanocrystal/colloidal crystal guest-host ensembles.

We report herein the controllable generation of encodable multi-fluorescence CdTe@carbon nanoparticles (CdTe@C NPs) via the pyrolysis of quantum dot/photonic crystal (QD/PC) guest-host ensembles. The precursors of CdTe/poly(styrene-co-glycidylmethacrylate) (PS-co-PGMA) QD/PC guest-host ensembles were initially formed via the assembly of epoxy groups of PCs and carboxyl groups on the surface of CdTe QDs, followed by a pyrolysis process to generate CdTe@C NPs. The as-prepared CdTe@C NPs not only integrate the optical properties for both the carbon and CdTe QD constituents, but also enable an impressive enhancement of the fluorescence lifetime for CdTe QDs. The multifarious fluorescent spectra coding for CdTe@C NPs was further generated through regulating the embedded sizes or concentrations of CdTe QDs and the excitation wavelength, and their applications in DNA detection and luminescent patterns were achieved.

Rapid Preparation of Superabsorbent Self-Healing Hydrogels by Frontal Polymerization.

Hydrogels have received increasing interest owing to their excellent physicochemical properties and wide applications. In this paper, we report the rapid fabrication of new hydrogels possessing a super water swelling capacity and self-healing ability using a fast, energy-efficient, and convenient method of frontal polymerization (FP). Self-sustained copolymerization of acrylamide (AM), 3-[Dimethyl-[2-(2-methylprop-2-enoyloxy)ethyl]azaniumyl]propane-1-sulfonate (SBMA), and acrylic acid (AA) within 10 min via FP yielded highly transparent and stretchable poly(AM-co-SBMA-co-AA) hydrogels. Thermogravimetric analysis and Fourier transform infrared spectroscopy confirmed the successful fabrication of poly(AM-co-SBMA-co-AA) hydrogels with a single copolymer composition without branched polymers. The effect of monomer ratio on FP features as well as porous morphology, swelling behavior, and self-healing performance of the hydrogels were systematically investigated, showing that the properties of the hydrogels could be tuned by adjusting the chemical composition. The resulting hydrogels were superabsorbent and sensitive to pH, exhibiting a high swelling ratio of up to 11,802% in water and 13,588% in an alkaline environment. The rheological data revealed a stable gel network. These hydrogels also had a favorable self-healing ability with a healing efficiency of up to 95%. This work contributes a simple and efficient method for the rapid preparation of superabsorbent and self-healing hydrogels.

Indicators and medical tests to identify lower limb swelling causes after total knee arthroplasty: a Delphi study with multidisciplinary experts.

BACKGROUND: Lower limb swelling after total knee arthroplasty (TKA) hinders surgical effectiveness. The poor results of studies on swelling interventions are due to the lack of a classification of swelling causes through appropriate medical tests. A gold standard is missing. This study aimed to clarify the causes of TKA postoperative swelling and how to identify them through indicators and medical tests by consulting a wide range of experts from multiple disciplines. METHOD: The Delphi method was used. A first draft of the index was prepared based on a systematic search of the literature. A total of 11 experts from several disciplines were invited to evaluate the rationality of the indicators and suggest modifications. After two rounds of consultation, the experts reached a consensus, and the consultation was stopped. RESULTS: The response rate of the 11 experts was 100%, and the authoritative Cr was 0.896. Kendall's W values for opinion coordination of the two rounds of consultation were 0.262 and 0.226, respectively (P < 0.001). Among the final indicators, there were 4 primary indicators for swelling cause classification (inflammatory response, poor venous return, joint hematoma, muscle damage, and healing), 19 secondary and 19 tertiary indicators. CONCLUSION: The indications obtained by systematic literature review and multidisciplinary expert consultation are reliable and scientific. Multiple causes of lower extremity swelling after TKA were identified. Blood test indicators can reflect an inflammatory response, suggest poor venous return, and reflect muscle damage and healing progress. Ultrasound scans are needed to identify underlying thrombotic or valvular problems, joint hematomas, and muscle damage. These tests help clinicians and researchers determine the cause of swelling after TKA and take appropriate management.

The functional significance of residual yolk in lizards.

Residual yolk is assumed to be an important source of energy and nutrients during early life in nonmammalian amniotes. Available data show that the mean size of residual yolk is far smaller in lizards than in turtles, snakes, crocodiles, and birds, raising a question of whether residual yolk is of functional significance in lizards. Here, we compared data from 26 lizard species with those from other nonmammalian amniotes to test the hypothesis that residual yolk is functionally less significant in species producing more fully developed offspring. In our sample, species mean offspring water contents ranged from 73% to 84% of body wet mass; species mean proportions of carcass dry mass, fat-body dry mass, and residual yolk dry mass to offspring dry mass ranged from 84% to 99%, 0% to 5.0%, and 0% to 14.4%, respectively. Lizards are, on average, more fully developed at hatching or birth than snakes, as revealed by the fact that the mean proportion of carcass dry mass to body dry mass and offspring water contents were both higher in lizards than in snakes. We conclude that the functional significance of residual yolk during early life is generally less evident in lizards. Even in the lizards where residual yolk is of potential functional significance, this portion of yolk contributes little, if any, to postembryonic growth. Future work could usefully collect data across a wider spectrum of reptile taxa to establish a precocial-altricial continuum and test the hypothesis that species with a smaller amount of residual yolk are closer to the precocial end of the continuum.

Rapid Synthesis of Robust Antibacterial and Biodegradable Hydrogels via Frontal Polymerization.

Chitosan (CS) is widely used in biomedical hydrogels due to their similarity to extracellular matrix. However, the preparation method of CS-based hydrogel suffers the drawbacks of tedious operation, time-consuming and energy consumption. Thus, there is an urgent need to develop a rapid synthesis pathway towards hydrogels. In this work, we used a modified CS as a cross-linking agent and acrylic acid (AA) as monomer to prepare a hydrogel through frontal polymerization (FP), which facilitates a facile and rapid method achieved in several minutes. The occurrence of pure FP was confirmed via the frontal velocity and temperature profile measurement. In addition, the as-prepared hydrogel shows excellent mechanical strength up to 1.76 MPa, and the Young's modulus (ranging from 0.16 to 0.56 MPa) is comparable to human skin. The degradation mechanism is revealed by the micro-IR images through the distribution of the functional groups, which is attributed to the breakage of the ether bond. Moreover, the hydrogel exhibits excellent degradability, biocompatibility and antibacterial properties, offering great potentials in tissue engineering. We believe this work not only offers a facile and rapid FP method to fabricate a robust degradable hydrogel, but also provides an effective pathway for the investigation of the degradation mechanism at the chemical bond analysis level.