Amyloplast sedimentation repolarizes LAZYs to achieve gravity sensing in plants.

Gravity controls directional growth of plants, and the classical starch-statolith hypothesis proposed more than a century ago postulates that amyloplast sedimentation in specialized cells initiates gravity sensing, but the molecular mechanism remains uncharacterized. The LAZY proteins are known as key regulators of gravitropism, and lazy mutants show striking gravitropic defects. Here, we report that gravistimulation by reorientation triggers mitogen-activated protein kinase (MAPK) signaling-mediated phosphorylation of Arabidopsis LAZY proteins basally polarized in root columella cells. Phosphorylation of LAZY increases its interaction with several translocons at the outer envelope membrane of chloroplasts (TOC) proteins on the surface of amyloplasts, facilitating enrichment of LAZY proteins on amyloplasts. Amyloplast sedimentation subsequently guides LAZY to relocate to the new lower side of the plasma membrane in columella cells, where LAZY induces asymmetrical auxin distribution and root differential growth. Together, this study provides a molecular interpretation for the starch-statolith hypothesis: the organelle-movement-triggered molecular polarity formation.

Brassinosteroids promote etiolated apical structures in darkness by amplifying the ethylene response via the EBF-EIN3/PIF3 circuit.

Germinated plants grow in darkness until they emerge above the soil. To help the seedling penetrate the soil, most dicot seedlings develop an etiolated apical structure consisting of an apical hook and folded, unexpanded cotyledons atop a rapidly elongating hypocotyl. Brassinosteroids (BRs) are necessary for etiolated apical development, but their precise role and mechanisms remain unclear. Arabidopsis thaliana SMALL AUXIN UP RNA17 (SAUR17) is an apical-organ-specific regulator that promotes production of an apical hook and closed cotyledons. In darkness, ethylene and BRs stimulate SAUR17 expression by transcription factor complexes containing PHYTOCHROME-INTERACTING FACTORs (PIFs), ETHYLENE INSENSITIVE 3 (EIN3), and its homolog EIN3-LIKE 1 (EIL1), and BRASSINAZOLE RESISTANT1 (BZR1). BZR1 requires EIN3 and PIFs for enhanced DNA-binding and transcriptional activation of the SAUR17 promoter; while EIN3, PIF3, and PIF4 stability depends on BR signaling. BZR1 transcriptionally downregulates EIN3-BINDING F-BOX 1 and 2 (EBF1 and EBF2), which encode ubiquitin ligases mediating EIN3 and PIF3 protein degradation. By modulating the EBF-EIN3/PIF protein-stability circuit, BRs induce EIN3 and PIF3 accumulation, which underlies BR-responsive expression of SAUR17 and HOOKLESS1 and ultimately apical hook development. We suggest that in the etiolated development of apical structures, BRs primarily modulate plant sensitivity to darkness and ethylene.

Combating bacterial infections with host defense peptides: Shifting focus from bacteria to host immunity.

The increasing prevalence of multidrug-resistant bacterial infections necessitates the exploration of novel paradigms for anti-infective therapy. Antimicrobial peptides (AMPs), also known as host defense peptides (HDPs), have garnered extensive recognition as immunomodulatory molecules that leverage natural host mechanisms to enhance therapeutic benefits. The unique immune mechanism exhibited by certain HDPs that involves self-assembly into supramolecular nanonets capable of inducing bacterial agglutination and entrapping is significantly important. This process effectively prevents microbial invasion and subsequent dissemination and significantly mitigates selective pressure for the evolution of microbial resistance, highlighting the potential of HDP-based antimicrobial therapy. Recent advancements in this field have focused on developing bio-responsive materials in the form of supramolecular nanonets. A comprehensive overview of the immunomodulatory and bacteria-agglutinating activities of HDPs, along with a discussion on optimization strategies for synthetic derivatives, is presented in this article. These optimized derivatives exhibit improved biological properties and therapeutic potential, making them suitable for future clinical applications as effective anti-infective therapeutics.

Construction of an Electron Capture and Transfer Center for Highly Efficient and Selective Solar-Light-Driven CO2 Conversion.

Exploring high-efficiency photocatalysts for selective CO2 reduction is still challenging because of the limited charge separation and surface reactions. In this study, a noble-metal-free metallic VSe2 nanosheet was incorporated on g-C3N4 to serve as an electron capture and transfer center, activating surface active sites for highly efficient and selective CO2 photoreduction. Quasi in situ X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and femtosecond transient absorption spectroscopy (fs-TAS) unveiled that VSe2 could capture electrons, which are further transferred to the surface for activating active sites. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations revealed a kinetically feasible process for the formation of a key intermediate and confirmed the favorable production of CO on the VSe2/PCN (protonated C3N4) photocatalyst. As an outcome, the optimized VSe2/PCN composite achieved 97% selectivity for solar-light-driven CO2 conversion to CO with a high rate of 16.3 µmol·g-1·h-1, without any sacrificial reagent or photosensitizer. This work offers new insights into the photocatalyst design toward highly efficient and selective CO2 conversion.

Exploiting Topological Darkness in Photonic Crystal Slabs for Spatiotemporal Vortex Generation.

Spatiotemporal optical vortices (STOVs) with swirling phase singularities in space and time hold great promise for a wide range of applications across diverse fields. However, current approaches to generate STOVs lack integrability and rely on bulky free-space optical components. Here, we demonstrate routine STOV generation by harnessing the topological darkness phenomenon of a photonic crystal slab. Complete polarization conversion enforced by symmetry enables topological darkness to arise from photonic bands of guided resonances, imprinting vortex singularities onto an ultrashort reflected pulse. Utilizing time-resolved spatial mapping, we provide the first observation of STOV generation using a photonic crystal slab, revealing the imprinted STOV structure manifested as a curved vortex line in the pulse profile in space and time. Our work establishes photonic crystal slabs as a versatile and accessible platform for engineering STOVs and harnessing the topological darkness in nanophotonics.

Roles of HIF-1α signaling in Mycobacterium tuberculosis infection: New targets for anti-TB therapeutics?

Tuberculosis (TB), a deadly infectious disease induced by Mycobacterium tuberculosis (Mtb), continues to be a global public health issue that kill millions of patents every year. Despite significant efforts have been paid to identify effective TB treatments, the emergence of drug-resistant strains of the disease and the presence of comorbidities in TB patients urges us to explore the detailed mechanisms involved in TB immunity and develop more effective innovative anti-TB strategies. HIF-1α, a protein involved in regulating cellular immune responses during TB infection, has been highlighted as a promising target for the development of novel strategies for TB treatment due to its critical roles in anti-TB host immunity. This review provides a summary of current research progress on the roles of HIF-1α in TB infection, highlighting its importance in regulating the host immune response upon Mtb infection and summarizing the influences and mechanisms of HIF-1α on anti-TB immunological responses of host cells. This review also discusses the various challenges associated with developing HIF-1α as a target for anti-TB therapies, including ensuring specificity and avoiding off-target effects on normal cell function, determining the regulation and expression of HIF-1α in TB patients, and developing drugs that can inhibit HIF-1α. More deep understanding of the molecular mechanisms involved in HIF-1α signaling, its impact on TB host status, and systematic animal testing and clinical trials may benefit the optimization of HIF-1α as a novel therapeutic target for TB.

In Situ Symbiosis of Cerium Oxide Nanophase for Enhancing the Oxygen Electrocatalysis Performance of Single-Atom Fe─N─C Catalyst with Prolonged Stability for Zinc-Air Batteries.

The Fenton reaction, induced by the H2O2 formed during the oxygen reduction reaction (ORR) process leads to significant dissolution of Fe, resulting in unsatisfactory stability of the iron-nitrogen-doped carbon catalysts (Fe-NC). In this study, a strategy is proposed to improve the ORR catalytic activity while eliminating the effect of H2O2 by introducing CeO2 nanoparticles. Transmission electron microscopy and subsequent characterizations reveal that CeO2 nanoparticles are uniformly distributed on the carbon substrate, with atomically dispersed Fe single-atom catalysts (SACs) adjacent to them. CeO2@Fe-NC achieves a half-wave potential of 0.89 V and a limiting current density of 6.2 mA cm-2, which significantly outperforms Fe-NC and commercial Pt/C. CeO2@Fe-NC also shows a half-wave potential loss of only 1% after 10 000 CV cycles, which is better than that of Fe-NC (7%). Further, H2O2 elimination experiments show that the introduction of CeO2 significantly accelerate the decomposition of H2O2. In situ Raman spectroscopy results suggest that CeO2@Fe-NC significantly facilitates the formation of ORR intermediates compared with Fe-NC. The Zn-air batteries utilizing CeO2@Fe-NC cathodes exhibit satisfactory peak power density and open-circuit voltage. Furthermore, theoretical calculations show that the introduction of CeO2 enhances the ORR activity of Fe-NC SAC. This study provides insights for optimizing SAC-based electrocatalysts with high activity and stability.

Stabilization of LiCoO2 Cathodes in High Voltage Lithium Metal Batteries Through 2-(Trifluoromethyl)Benzamide (2-TFMBA) Electrolyte Additives.

Increasing the charging cutoff voltage of LiCoO2 to 4.6 V is significant for enhancing battery density. However, the practical application of Li‖LiCoO2 batteries with a 4.6 V cutoff voltage faces significant impediments due to the detrimental changes under high voltage. This study presents a novel bifunctional electrolyte additive, 2-(trifluoromethyl)benzamide (2-TFMBA), which is employed to establish a stable and dense cathode-electrolyte interface (CEI). Characterization results reveal that an optimized CEI is achieved through the synergistic effects of the amide groups and trifluoromethyl groups within 2-TFMBA. The resulting CEI not only enhances the structural stability of LiCoO2 but also serves as a high-speed lithium-ion conduction channel, which expedites the insertion and extraction of lithium ions. The Li‖LiCoO2 batteries with 0.5 wt% 2-TFMBA achieves an 84.7% capacity retention rate after enduring 300 cycles at a current rate of 1 C, under a cut-off voltage of 4.6 V. This study provides valuable strategic insights into the stabilization of cathode materials in high-voltage batteries.

Enhancing the performance of mode-pairing quantum key distribution by wavelength division multiplexing.

Mode-pairing quantum key distribution (MP-QKD) holds great promise for the practical implementation of QKD in the near future. It combines the security advantages of measurement device independence while still being capable of breaking the Pirandola-Laurenza-Ottaviani-Banchi bound without the need for highly demanding phase-locking and phase-tracking technologies for deployment. In this work, we explore optimization strategies for MP-QKD in a wavelength-division multiplexing scenario. The simulation results reveal that incorporation of multiple wavelengths not only leads to a direct increase in key rate but also enhances the pairing efficiency by employing our novel pairing strategies among different wavelengths. As a result, our work provides a new avenue for the future application and development of MP-QKD.

LncRNA PGM5-AS1 inhibits non-small cell lung cancer progression by targeting miRNA-423-5p/SLIT2 axis.

Non-small cell lung cancer (NSCLC) is a common and aggressive primary malignancy worldwide. Dysregulation of long non-coding RNAs (lncRNAs) has been shown to play an essential regulatory role in multiple cancers. However, the role of PGM5-AS1 in NSCLC remains unclear. Here, we found that PGM5-AS1 was down-regulated in NSCLC tissues and cells. Furthermore, reduced PGM5-AS1 expression levels were associated with larger tumor size, positive lymph node metastasis, advanced TNM stage and worse prognosis. We found that overexpression of PGM5-AS1 inhibited cell proliferation and metastasis, and induced apoptosis and G0/G1 cell cycle arrest in NSCLC cell lines. Using dual luciferase gene reporter and RNA immunoprecipitation assays, we confirmed that miR-423-5p interacted with PGM5-AS1, and that their expression levels were negatively correlated in NSCLC tissues. miR-423-5p was also found to reverse PGM5-AS1-induced malignant biological behavior. Moreover, we identified slit guidance ligand 2 (SLIT2) as a target gene of miR-423-5p. Using a dual luciferase gene reporter assay, we confirmed the regulatory relationship between SLIT2 and miR-423-5p and demonstrated that their expression levels were negatively correlated. Our rescue experiments showed that SLIT2 knockdown reversed miR-423-5p-mediated effects. Overall, this study identifies PGM5-AS1 as a potential prognostic biomarker for NSCLC and shows that PGM5-AS1 suppresses NSCLC development by regulating the miR-423-5p/SLIT2 axis.

Recent research progresses of Sn/Bi/In-based electrocatalysts for electroreduction CO2 to formate.

Carbon dioxide electroreduction reaction (CO2RR) can take full advantage of sustainable power to reduce the continuously increasing carbon emissions. Recycling CO2 to produce formic acid or formate is a technologically and economically viable route to accomplish CO2 cyclic utilization. Developing efficient and cost-effective electrocatalysts with high selectivity towards formate is prioritized for the industrialized applications of CO2RR electrolysis. From the previous explored CO2RR catalysts, Sn, Bi and In based materials have drawn increasing attentions due to the high selectivity towards formate. However, there are still confronted with several challenges for the practical applications of these materials. Therefore, a rational design of the catalysts for formate is urgently needed for the target of industrialized applications. Herein, we comprehensively summarized the recent development in the advanced electrocatalysts for the CO2RR to formate. Firstly, the reaction mechanism of CO2RR is introduced. Then the preparation and design strategies of the highly active electrocatalysts are presented. Especially the innovative design mechanism in engineering materials for promoting catalytic performance, and the efforts on mechanistic exploration using in situ (ex situ) characterization techniques are reviewed. Subsequently, some perspectives and expectations are proposed about current challenges and future potentials in CO2RR research.

High-Quality TiO2 Electron Transport Film Prepared via Vacuum Ultraviolet Illumination for MAPbI3 Perovskite Solar Cells.

The electron transport layer (ETL) plays an important role in determining the conversion efficiency and stability of perovskite solar cells (PSCs). Here, TiO2 thin film was prepared by irradiating diisopropoxy diacetylacetone titanium precursor thin film with 172 nm vacuum ultraviolet (VUV) at a low temperature. The prepared TiO2 thin film has higher electron mobility and conductivity. As it is used as an ETL for MAPbI3 PSCs, its band structure is better matched with the perovskite, and at the same time, due to the good interface contact, more uniform perovskite crystals are formed. Most importantly, a large number of hydroxyl radicals were formed during VUV irradiation of the precursor film, which made up for the oxygen defect present on the surface of the TiO2 thin film, and were adsorbed to the film surface. These hydroxyl groups form hydrogen bonds with methylammonium (MA) components on the MAPbI3 buried surface, thus promoting the transfer of photogenerated electrons at the MAPbI3/ETL interface. The power conversion efficiency of PSCs fabricated in air with the ETL prepared by VUV irradiation is 20.46%, which is higher than that of the contrast solar cell based on the sintered ETL (17.96%).

Acute liver failure caused by high-dose tigecycline: A case report.

High-dose tigecycline is gradually being introduced for the treatment of serious infectious diseases due to the increasing difficulty in treating pan-resistant bacterial infections. However, the safety of high-dose tigecycline is controversial. We report the case of a 76-year-old female patient with cerebral hemorrhage who received high-dose tigecycline (100 mg q12h) with other drugs for ventilator-associated pneumonia. 25 days after admission, she developed acute liver failure, mainly manifested by abnormally high bilirubin, coagulation dysfunction, and gastrointestinal hemorrhage with hemorrhagic shock. According to the updated Roussel Uclaf causality assessment method, the patient's acute liver injury was most likely caused by tigecycline.

RUNX3 pathway signature predicts clinical benefits of immune checkpoint inhibition plus tyrosine kinase inhibition in advanced renal cell carcinoma.

BACKGROUND: Checkpoint inhibitor immunotherapy plus tyrosine kinase inhibitor (IO/TKI) have been recently recommended as standard first-line therapy for advanced renal cell carcinoma, while no clinical-available biomarker has been applied. This study aimed to investigate the associations between RUNX3 pathway signature and IO/TKI benefits in renal cell carcinoma (RCC). METHODS: Two IO/TKI cohorts (ZS-MRCC, JAVELIN-101) and one high-risk localized RCC cohort (ZS-HRRCC) were included. All samples were evaluated by RNA-sequencing, and RUNX Family Transcription Factor 3 (RUNX3) pathway were determined by single sample gene set enrichment analysis. Flow cytometry were applied for immune cell infiltration and function. RESULTS: RUNX3 signature was elevated in RCC samples, compared non-tumor tissues (P < 0.001). High-RUNX3 signature was associated with shorter progression-free survival (PFS) in both IO/TKI cohorts (ZS-MRCC cohort, P = 0.025; JAVELIN-101 cohort, P = 0.019). RUNX3 signature also predicted IO/TKI benefit in advanced RCC, compared with TKI monotherapy (interaction p = 0.027). RUNX3 signature was associated with decreased number of GZMB + CD8 + T cells (Spearman's ρ=-0.42, P = 0.006), and increased number of PD1 + CD8 + T cells (Spearman's ρ = 0.29, P = 0.072). Moreover, the integration of RUNX3 signature and GZMB expression showed predictive potential for TKI/IO (log-rank P < 0.001). In addition, the predictive value of RUNX3 signature for IO/TKI benefit was restricted in SETD2-wild type patients (log-rank P < 0.001). Finally, a risk score was established by random forest for IO/TKI benefit, showing remarkable predictive potency (Log-rank P < 0.001). CONCLUSIONS: RUNX3 pathway signature could be a potential predictive biomarker for IO/TKI treatment in advanced RCC, for both prognosis and treatment selection between IO/TKI and TKI monotherapy.

Survey of Heterodera glycines population abundance and virulence phenotypes during 2021-2022 in Heilongjiang Province.

Soybean cyst nematode (SCN), Heterodera glycines, poses a significant threat to global soybean production. Heilongjiang, the largest soybean-producing province in China, contributes over 40% to the country's total yield. This province has much longer history of SCN infestation. To assess the current situation in Heilongjiang, we conducted a survey to determine the SCN population density and virulence phenotypes during 2021-2022 and compared the data with a previous study in 2015. A total of 377 soil samples from 48 counties representing eleven major soybean-planting regions were collected. The prevalence of SCN increased from 55.4% in 2015 to 59% in the current survey. The population densities ranged from 80 to 26,700 eggs and juveniles per 100 cm3 of soil. Virulence phenotypes were evaluated for 60 representative SCN populations using the HG type test, revealing nine different HG types. The most common virulence phenotypes were HG types 7 and 0, accounting for 56.7% and 20% of all SCN populations, respectively. The prevalence of populations with a reproductive index (FI) greater than 10% on PI548316 increased from 64.5% in 2015 to 71.7%. However, the FI on the commonly used resistance sources PI 548402 (Peking) and PI 437654 remained low at 3.3%. These findings highlight the increasing prevalence and changing virulence phenotypes of SCN in Heilongjiang. They also emphasize the importance of rotating soybean varieties with different resistance sources and urgently identifying new sources of resistance to combat SCN.

Enhanced and Sustainable Removal of Indoor Formaldehyde by Naturally Porous Bamboo Activated Carbon Supported with MnOx: Synergistic Effect of Adsorption and Oxidation.

Novel bamboo activated carbon (BAC) catalysts decorated with manganese oxides (MnOx) were prepared with varying MnOx contents through a facile one-step redox reaction. Due to the physical anchoring effect of the natural macropore structure for catalyst active components, homogeneous MnOx nanoparticles (NPs), and high specific surface area over catalyst surface, the BAC@MnOx-N (N = 1, 2, 3, 4, 5) catalyst shows encouraging adsorption and catalytic oxidation for indoor formaldehyde (HCHO) removal at room temperature. Dynamic adsorption and catalytic activity experiments were conducted. The higher Smicro (733 m2/g) and Vmicro/Vt (82.6%) of the BAC@MnOx-4 catalyst could facilitate its excellent saturated and breakthrough adsorption capacity (5.24 ± 0.42 mg/g, 2.43 ± 0.22 mg/g). The best performer against 2 ppm HCHO is BAC@MnOx-4 catalyst, exhibiting a maximum HCHO removal efficiency of 97% for 17 h without any deactivation as RH = 0, which is higher than those of other MnOx-based catalysts. The average oxidation state and in situ DRIFTS analysis reveal that abundant oxygen vacancies on the BAC@MnOx-4 catalyst could be identified as surface-active sites of decomposing HCHO into the intermediate species (dioxymethylene and formate). This study provides a potential approach to deposit MnOx nanoparticles onto the BAC surface, and this hybrid BAC@MnOx material is promising for indoor HCHO removal at room temperature.

Reconstructed Bismuth Oxide through in situ Carbonation by Carbonate-containing Electrolyte for Highly Active Electrocatalytic CO2 Reduction to Formate.

The catalyst-reconstruction makes it challenging to clarify the practical active sites and unveil the actual reaction mechanism during the CO2 electroreduction reaction (CO2 RR). However, currently the impact of the electrolyte microenvironment in which the electrolyte is in contact with the catalyst is overlooked and might induce a chemical evolution, thus confusing the reconstruction process and mechanism. In this work, the carbonate adsorption properties of metal oxides were investigated, and the mechanism of how the electrolyte carbonate affect the chemical evolution of catalysts were discussed. Notably, Bi2 O3 with weak carbonate adsorption underwent a chemical reconstruction to form the Bi2 O2 CO3 /Bi2 O3 heterostructure. Furthermore, in situ and ex situ characterizations unveiled the formation mechanism of the heterostructure. The in situ formed Bi2 O2 CO3 /Bi2 O3 heterostructure with strong electron interaction served as the highly active structure for CO2 RR, achieving a formate Faradaic efficiency of 98.1 % at -0.8 Vvs RHE . Theoretical calculations demonstrate that the significantly tuned p-orbit electrons of the Bi sites in Bi2 O2 CO3 /Bi2 O3 optimized the adsorption of the intermediate and lowered the energy barrier for the formation of *OCHO. This work elucidates the mechanism of electrolyte microenvironment for affecting catalyst reconstruction, which contributes to the understanding of reconstruction process and clarification of the actual catalytic structure.

Light Enables the Cathodic Interface Reaction Reversibility in Solid-State Lithium-Oxygen Batteries.

Limited triple-phase boundaries arising from the accumulation of solid discharge product(s) in solid-state cathodes (SSCs) pose a challenge to high-property solid-state lithium-oxygen batteries (SSLOBs). Light-assisted SSLOBs have been gradually explored as an ingenious system; however, the fundamental mechanisms of the SSCs interface behavior remain unclear. Here, we discovered that light assistance can enhance the fast inner-sphere charge transfer in SSCs and regulate the discharge products with spherical particles generated via the surface growth model. Moreover, the high photoelectron excitation and transportation capabilities of SSCs can retard cathodic catalytic decay by avoiding structural degradation of the cathode with a reduced charge voltage. The light-induced SSLOBs exhibited excellent stability (170 cycles) with a low discharge-charge polarization overpotential (0.27 V). Furthermore, transparent SSLOBs with exceptional flexibility, mechanical stability, and multiform shapes were fabricated for theory-to-practical applications in sunlight-induced batteries. Our study opens new opportunities for the introduction of solar energy into energy storage systems.

Ion-Dipole-Interaction-Induced Encapsulation of Free Residual Solvent for Long-Cycle Solid-State Lithium Metal Batteries.

Owing to high ionic conductivity and mechanical strength, poly(vinylidene fluoride) (PVDF) electrolytes have attracted increasing attention for solid-state lithium batteries, but highly reactive residual solvents severely plague cycling stability. Herein, we report a free-solvent-capturing strategy triggered by reinforced ion-dipole interactions between Li+ and residual solvent molecules. Lithium difluoro(oxalato)borate (LiDFOB) salt additive with electron-withdrawing capability serves as a redistributor of the Li+ electropositive state, which offers more binding sites for residual solvents. Benefiting from the modified coordination environment, the kinetically stable anion-derived interphases are preferentially formed, effectively mitigating the interfacial side reactions between the electrodes and electrolytes. As a result, the assembled solid-state battery shows a lifetime of over 2000 cycles with an average Coulombic efficiency of 99.9% and capacity retention of 80%. Our discovery sheds fresh light on the targeted regulation of the reactive residual solvent to extend the cycle life of solid-state batteries.

Structural Framework-Guided Universal Design of High-Entropy Compounds for Efficient Energy Catalysis.

High-entropy compounds with extraordinary properties due to the synergistic effect of multiple components have exhibited great potential and attracted extensive attention in various fields, including physics, mechanical property analysis, and energy storage. Achieving universal stability and synthesis of high-entropy compounds with a wide range of components and structures continues to be difficult due to the high complexity of multicomponent mixing. Here, we propose a design strategy with high generality for realizing the stability and synthesis of high-entropy compounds that one metal site like the framework in the compound structures with bimetallic sites stabilizes another site to accommodate different elements. Several typical metal compounds with bimetallic sites, including perovskite hydroxides, layered double hydroxide, spinel sulfide, perovskite fluoride, and spinel oxides, have been synthesized into high-entropy compounds. High-entropy perovskite hydroxides (HEPHs) as representative compounds have been synthesized with a highly wide range of components even a septenary component and exhibit great oxygen evolution activity. Our work provides a design platform to develop more high-entropy compound systems with promising development potential for electrocatalysts.