Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Más filtros

Bases de datos
Tipo del documento
Asunto de la revista
Intervalo de año de publicación
1.
Phys Chem Chem Phys ; 18(28): 19001-10, 2016 Jul 28.
Artículo en Inglés | MEDLINE | ID: mdl-27356177

RESUMEN

In this work, a rare 2D → 3D single-crystal-to-single-crystal transformation (SCSC) is observed in metal-organic coordination complexes, which is triggered by thermal treatment. The 2D two-fold interpenetrating square lattice layer [Cd(IBA)2]n (1) is irreversibly converted into a 3D four-fold interpenetrating diamond framework {[Cd(IBA)2(H2O)]·2.5H2O}n (2) (HIBA = 4-(1H-imidazol-1-yl)benzoic acid). Consideration is given to these two complexes with different interpenetrating structures and dimensionality, and their influence on photovoltaic properties are studied. Encouraged by the UV-visible absorption and HOMO-LUMO energy states matched for sensitizing TiO2, the two complexes are employed in combination with N719 in dye-sensitized solar cells (DSSCs) to compensate absorption in the ultraviolet and blue-violet region, offset competitive visible light absorption of I3(-) and reducing charge the recombination of injected electrons. After co-sensitization with 1 and 2, the device co-sensitized by 1/N719 and 2/N719 to yield overall efficiencies of 7.82% and 8.39%, which are 19.94% and 28.68% higher than that of the device sensitized only by N719 (6.52%). Consequently, high dimensional interpenetrating complexes could serve as excellent co-sensitizers and have application in DSSCs.

2.
Phys Chem Chem Phys ; 18(37): 26254-26261, 2016 Sep 21.
Artículo en Inglés | MEDLINE | ID: mdl-27711691

RESUMEN

Planar heterojunction perovskite solar cells (PHJ-PSCs) constructed with one-step precursor solution spin-coating deposition (OPSSD) usually give an extremely low performance mainly due to the poor morphology and low crystallinity of the perovskite films. In this work, by incorporating a suitable HONH3Cl additive in the perovskite precursor solution, a high quality perovskite film with improved morphology and crystallinity was obtained. The UV-vis measurement of the CH3NH3I solutions without and with HONH3Cl demonstrates that the improved quality of the perovskite film can be easily attributed to a combined effect of N2, I2, H2O and CH3NH3Cl originating from the oxidation of CH3NH3I triggered by the HONH3Cl additive, which can manipulate the crystallization process of the perovskite. Accordingly, the improved performance for the HONH3Cl-induced PHJ-PSCs can also be demonstrated. At the optimized molar ratio of 1 : 1 : 0.1 for PbI2 : CH3NH3I : HONH3Cl, the PHJ-PSCs exhibit an average power conversion efficiency (PCE) of 10.61 ± 0.51%, which is much higher than that of pristine 1 : 1 : 0 based cells without additive (7.21 ± 0.61%), and the best performing HONH3Cl-induced device can yield a PCE as high as 11.12% with a Jsc of 18.42 mA cm-2, Voc of 0.95 V and FF of 0.63. Introducing suitable HONH3Cl as an additive into the perovskite precursor solution is really an effective route to enhance the performance of the PHJ-PSCs via OPSSD.

3.
Inorg Chem ; 54(16): 7742-52, 2015 Aug 17.
Artículo en Inglés | MEDLINE | ID: mdl-26207930

RESUMEN

Using Schiff-base ligands (E)-N-(6-methoxypyridin-2-yl)(CH═NAr) (where Ar = C6H5, L1; 2-MeC6H4, L2; 2,4,6-Me3C6H2, L3), six Zn(II)/Hg(II) complexes, namely, [ZnL1Cl2] (Zn1), [HgL1Cl2] (Hg1), [ZnL2Cl2] (Zn2), [HgL2Cl2] (Hg2), [ZnL3Cl2] (Zn3), and [HgL3Cl2] (Hg3) have been synthesized under solvothermal conditions. The structures of six complexes have been established by X-ray single-crystal analysis and further physically characterized by EA, FT-IR, (1)H NMR, and ESI-MS. The crystal structures of these complexes indicate that noncovalent interactions, such as hydrogen bonds, C-H···Cl, and π···π stacking, play essential roles in constructing the resulting supramolecular structures (1D for Hg3; 2D for Zn2, Hg2; 3D for Zn1, Hg1, and Zn3). Upon irradiation with UV light, the emission of complexes Zn1-Zn3 and Hg1-Hg3 could be finely tuned from green (480-540 nm) in the solid state to blue (402-425 nm) in acetonitrile solution. It showed that the ligand and metal cation can influence the structures and luminescence properties of complexes such as emission intensities and maximum wavelengths. Since these ligands and complexes could compensate for the absorption of N719 in the low-wavelength region of the visible spectrum and reduce charge recombination of the injected electron, the ligands L1-L3 and complexes Zn3/Hg3 were employed to prepare cosensitized dye-sensitized solar cells devices for investigating the influences of the electron-donating group and coordination on the DSSCs performance. Compared to DSSCs only being sensitized by N719, these prepared ligands and complexes chosen to cosensitize N719 in solar cell do enhanced its performance by 11-41%. In particular, a DSSC using L3 as cosensitizer displays better photovoltaic performance with a short circuit current density of 18.18 mA cm(-2), corresponding to a conversion efficiency of 7.25%. It is much higher than that for DSSCs only sensitized by N719 (5.14%).

4.
Dalton Trans ; 46(4): 1266-1276, 2017 Jan 24.
Artículo en Inglés | MEDLINE | ID: mdl-28067376

RESUMEN

A series of Zn(ii) complexes with different conjugated systems, [ZnL1Cl2]2 (Zn1), [ZnL2Cl2] (Zn2), [Zn(L3)2]·(ClO4)2 (Zn3), [Zn2L4Cl4] (Zn4), and [ZnL5Cl2] (Zn5), were synthesized and subsequently characterized via single crystal X-ray diffraction, 1H and 13C NMR, FT-IR, elemental analyses, melting point, and PXRD. The X-ray diffraction analyses revealed that the supramolecular frameworks of complexes Zn1-Zn5 are constructed by C-HO/Cl hydrogen bonds and ππ interactions. Complexes Zn1-Zn3 feature 3D 6-connected {412·63} topological structures, whereas complex Zn4 exhibits a 3D 7-connected supramolecular framework with a {417·64} topological structure. However, complex Zn5 shows one-dimensional "wave-like" chains. Based on these varied structures, the emission maximum wavelengths of complexes Zn1-Zn5 can be tuned in a wide range of 461-592 nm due to the red shift direction of λem caused by different conjugated systems and their electron donating abilities. Complex Zn3 shows a strong luminescence in the solid state and in the acetonitrile solution. Therefore, a series of Zn3-poly(methylmethacrylate) (Zn3-PMMA) hybrid materials were obtained by controlling the concentration of complex Zn3 in poly(methylmethacrylate) (PMMA). At an optimal concentration of 4%, the doped polymer film of Zn3-PMMA displays strong green luminescence emissions that are 19-fold in the luminescence intensities and 98 °C higher in the thermal stability temperature compared to the Zn3 film.

5.
Dalton Trans ; 44(11): 5179-90, 2015 Mar 21.
Artículo en Inglés | MEDLINE | ID: mdl-25683248

RESUMEN

A novel polydentate Schiff base ligand N(1),N(3)-bis[(6-methoxypyridin-2-yl)methylene]benzene-1,3-diamine (L) and its two dinuclear sandwich-like complexes {[CdL(NO3)(H2O)]·NO3}2 (1) and {[CdL(CH3CN)(H2O)]·(ClO4)2·(CH3CN)2}2 (2) were synthesized. Both C-H∙∙∙O, C-H∙∙∙N and π-π non-covalent interactions had essential roles in constructing the resulting three-dimensional supramolecular networks. L emits a more intense blue-green fluorescence emission around 493 nm than in dilute solution, exhibiting stacking-induced emission properties. Complexes 1 and 2 exhibited the dual properties of exceptional solvatochromism and fluorescence quenching towards CH3OH molecules. As these compounds could overcome the absent absorption of ruthenium complex N719 in the low wavelength region of the visible spectrum, offset the competitive visible light absorption of I3(-) and reduce the charge recombination of injected electrons, the Schiff base ligand l and complexes 1 and 2 were used as co-sensitizers in combination with N719 to investigate their effect on enhancing the performance of dye-sensitized solar cells. A short circuit current density of 14.37 mA cm(-2), an open-circuit voltage of 0.71 V and a fill factor of 0.61 corresponding to an overall conversion efficiency of 6.17% under AM 1.5 G solar irradiation were achieved when 1 was used as a co-sensitizer, which are much higher than the results obtained for dye-sensitized solar cells sensitized by N719 alone (5.06%).

6.
Dalton Trans ; 44(12): 5306-22, 2015 Mar 28.
Artículo en Inglés | MEDLINE | ID: mdl-25597537

RESUMEN

Nine IIB group complexes, [ZnL1Cl2] (Zn1), [CdL1Cl2]2 (Cd1), [HgL1Cl2] (Hg1), [ZnL2Cl2] (Zn2), [CdL2Cl2] (Cd2), [HgL2Cl2] (Hg2), [ZnL3Cl2] (Zn3), [CdL3Cl2] (Cd3) and [HgL3Cl2] (Hg3), have been synthesized from the corresponding ortho-(6-methoxy-pyridyl)(CH[double bond, length as m-dash]NAr) (where Ar = 2,6-iPr2C6H3, L1; 4-MeC6H4, L2; 2-OMeC6H4, L3) Schiff base and structurally characterized by elemental analysis, FT-IR, (1)H NMR and X-ray single-crystal analysis. Crystallographic studies reveal that the center metal of the complexes adopts a distorted tetrahedron geometry (except for Cd1 and Cd3, which display square pyramidal geometry) and C-HCl hydrogen bonds and ππ stacking interactions contribute to three-dimensional supramolecular structures. The series of complexes exhibit tunable luminescence from blue, through green, to light yellow by varying the temperature (298 K and 77 K), both in solution and in the solid state. Moreover, the quantum yields range from 0.027 to 0.422, and decrease according to the order of the periodic table (Zn > Cd > Hg). These results indicate that the center atom of the complexes leads to the geometry differences and hence to the tunable luminescence properties. Because Zn1-Zn3 exhibited higher molar extinction coefficients and a distinct absorption region, they were employed as co-sensitizers in ruthenium dye N719-sensitized photoanodes to deliver light-electricity efficiency enhancement, being assembled with counter-electrodes and electrolyte to prepare ZnX/N719 (where ZnX = Zn1, Zn2, and Zn3) co-sensitized dye sensitized solar cell (DSSC) devices. The prepared co-absorbent could overcome the deficiency of N719 absorption in the low-wavelength region of the visible spectrum, and offset competitive visible-light absorption of I3(-). Application of these prepared complexes in N719-sensitized solar cells enhanced their performance by 10-36%, which indicated a potential application of these types of complexes in DSSCs.

7.
Dalton Trans ; 44(41): 18187-95, 2015 Nov 07.
Artículo en Inglés | MEDLINE | ID: mdl-26419745

RESUMEN

This work reports on two new complexes with the general formula [Cd3(IBA)3(Cl)2(HCOO)(H2O)]n (1) and {[Cd1.5(IBA)3(H2O)6]·3.5H2O}n (2), which can be synthesized by the reaction of Cd(II) with rigid linear ligand 4-HIBA containing imidazolyl and carboxylate functional groups [4-HIBA = 4-(1H-imidazol-1-yl)benzoic acid]. Single-crystal X-ray diffraction analyses indicate that complex 1 is a 2D "wave-like" layer structure constructed from trinuclear units and complex 2 is just a mononuclear structure. Surprisingly, both complexes 1 and 2 appear as a 3D supramolecular network via intermolecular hydrogen bonding interactions. What's more, due to their strong UV-visible absorption, 1 and 2 can be employed as co-sensitizers in combination with N719 to enhance dye-sensitized solar cell (DSSC) performance. Both of them could overcome the deficiency of the ruthenium complex N719 absorption in the region of ultraviolet and blue-violet, and the charge collection efficiency is also improved when 1 and 2 are used as co-sensitizers, which are all in favor of enhancing the performance. The DSSC devices using co-sensitizers of 1/N719 and 2/N719 show an overall conversion efficiency of 8.27% and 7.73% with a short circuit current density of 17.48 mA cm(-2) and 17.39 mA cm(-2), and an open circuit voltage of 0.75 V and 0.74 V, respectively. The overall conversion efficiency is 27.23% and 18.92% higher than that of a device solely sensitized by N719 (6.50%). Consequently, the prepared complexes are high efficiency co-sensitizers for enhancing the performance of N719 sensitized solar cells.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA