RESUMEN
The coronavirus disease 2019 pandemic highlighted the need for more rapid and routine application of modeling approaches such as quantitative microbial risk assessment (QMRA) for protecting public health. QMRA is a transdisciplinary science dedicated to understanding, predicting, and mitigating infectious disease risks. To better equip QMRA researchers to inform policy and public health management, an Advances in Research for QMRA workshop was held to synthesize a path forward for QMRA research. We summarize insights from 41 QMRA researchers and experts to clarify the role of QMRA in risk analysis by (1) identifying key research needs, (2) highlighting emerging applications of QMRA; and (3) describing data needs and key scientific efforts to improve the science of QMRA. Key identified research priorities included using molecular tools in QMRA, advancing dose-response methodology, addressing needed exposure assessments, harmonizing environmental monitoring for QMRA, unifying a divide between disease transmission and QMRA models, calibrating and/or validating QMRA models, modeling co-exposures and mixtures, and standardizing practices for incorporating variability and uncertainty throughout the source-to-outcome continuum. Cross-cutting needs identified were to: develop a community of research and practice, integrate QMRA with other scientific approaches, increase QMRA translation and impacts, build communication strategies, and encourage sustainable funding mechanisms. Ultimately, a vision for advancing the science of QMRA is outlined for informing national to global health assessments, controls, and policies.
RESUMEN
As the Coronavirus 2019 disease (COVID-19) started to spread rapidly in the state of Ohio, the Ecology, Epidemiology and Population Health (EEPH) program within the Infectious Diseases Institute (IDI) at The Ohio State University (OSU) took the initiative to offer epidemic modeling and decision analytics support to the Ohio Department of Health (ODH). This paper describes the methodology used by the OSU/IDI response modeling team to predict statewide cases of new infections as well as potential hospital burden in the state. The methodology has two components: (1) A Dynamical Survival Analysis (DSA)-based statistical method to perform parameter inference, statewide prediction and uncertainty quantification. (2) A geographic component that down-projects statewide predicted counts to potential hospital burden across the state. We demonstrate the overall methodology with publicly available data. A Python implementation of the methodology is also made publicly available. This manuscript was submitted as part of a theme issue on "Modelling COVID-19 and Preparedness for Future Pandemics".
Asunto(s)
COVID-19 , Humanos , COVID-19/epidemiología , SARS-CoV-2 , Ohio/epidemiología , Pandemias , HospitalesRESUMEN
CONTEXT: Prior to the COVID-19 pandemic, wastewater influent monitoring for tracking disease burden in sewered communities was not performed in Ohio, and this field was only on the periphery of the state academic research community. PROGRAM: Because of the urgency of the pandemic and extensive state-level support for this new technology to detect levels of community infection to aid in public health response, the Ohio Water Resources Center established relationships and support of various stakeholders. This enabled Ohio to develop a statewide wastewater SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) monitoring network in 2 months starting in July 2020. IMPLEMENTATION: The current Ohio Coronavirus Wastewater Monitoring Network (OCWMN) monitors more than 70 unique locations twice per week, and publicly available data are updated weekly on the public dashboard. EVALUATION: This article describes the process and decisions that were made during network initiation, the network progression, and data applications, which can inform ongoing and future pandemic response and wastewater monitoring. DISCUSSION: Overall, the OCWMN established wastewater monitoring infrastructure and provided a useful tool for public health professionals responding to the pandemic.
Asunto(s)
COVID-19 , Aguas Residuales , Humanos , Ohio , Pandemias/prevención & control , Salud Pública , COVID-19/epidemiología , COVID-19/prevención & control , SARS-CoV-2RESUMEN
INTRODUCTION: Currently, standard practice is to use the continuous suturing technique on the bronchial anastomosis during lung transplantation. This study used a large cohort to investigate and contrast continuous and interrupted suturing techniques, comparing survival outcomes and occurrence of postoperative bronchial complications to examine if utilization of interrupted suturing has merit. METHODS: Survival outcomes of 740 single-center lung transplant recipients over 8 y (February 2012-March 2020) were compared by suturing techniques: either continuous or interrupted at the bronchial anastomosis. Clinical parameters and demographics were compared between two suturing groups, with P values < 0.05 considered significant. The groups were compared for postoperative morbidity, including need for bronchial interventions. Survival was compared using Kaplan-Meier curves and log-rank tests. Cox regression analysis was run with statistically significant variables to study association with survival. RESULTS: Of the 740 patients, 462 received the continuous suturing technique and 278 received the interrupted suturing technique. Most demographic and clinical data were not statistically significant between the two groups, and those that were significant were not associated with worse survival outcomes, with the exception of the variable diagnosis. Bronchial complications were comparable between the continuous and interrupted groups (12.6% versus 10.4%, P = 0.382). Extracorporeal membrane oxygenation (ECMO) use did not differ significantly between the two groups (P = 0.12). The Kaplan-Meier curve showed comparable survival between groups (P = 0.98), and Cox regression analysis showed that only diagnosis, bronchial complications, and ECMO utilization were associated with different survival outcomes. Chronic obstructive pulmonary disorder was shown to be associated with more favorable survival outcomes as opposed to idiopathic pulmonary fibrosis and the category "other". The need for ECMO and the occurrence of a bronchial complication were also associated with worse survival outcomes. CONCLUSIONS: Both techniques showed reasonable post-transplant outcomes, as our study demonstrated similar survival outcomes and bronchial complication rates.
Asunto(s)
Trasplante de Pulmón , Técnicas de Sutura , Anastomosis Quirúrgica/efectos adversos , Anastomosis Quirúrgica/métodos , Bronquios/cirugía , Humanos , Trasplante de Pulmón/efectos adversos , Complicaciones Posoperatorias/epidemiología , Complicaciones Posoperatorias/etiología , Complicaciones Posoperatorias/cirugía , Estudios Retrospectivos , Técnicas de Sutura/efectos adversos , Suturas , Resultado del TratamientoRESUMEN
Wastewater-based epidemiology is an effective tool for monitoring infectious disease spread or illicit drug use within communities. At the Ohio State University, we conducted a SARS-CoV-2 wastewater surveillance program in the 2020-2021 academic year and compared results with the university-required weekly COVID-19 saliva testing to monitor COVID-19 infection prevalence in the on-campus residential communities. The objectives of the study were to rapidly track trends in the wastewater SARS-CoV-2 gene concentrations, analyze the relationship between case numbers and wastewater signals when adjusted using human fecal viral indicator concentrations (PMMoV, crAssphage) in wastewater, and investigate the relationship of the SARS-CoV-2 gene concentrations with wastewater parameters. SARS-CoV-2 nucleocapsid and envelope (N1, N2, and E) gene concentrations, determined with reverse transcription droplet digital PCR, were used to track SARS-CoV-2 viral loads in dormitory wastewater once a week at 6 sampling sites across the campus during the fall semester in 2020. During the following spring semester, research was focused on SARS-CoV2 N2 gene concentrations at 5 sites sampled twice a week. Spearman correlations both with and without adjusting using human fecal viral indicators showed a significant correlation (p < 0.05) between human COVID-19 positive case counts and wastewater SARS-CoV-2 gene concentrations. Spearman correlations showed significant relationships between N1 gene concentrations and both TSS and turbidity, and between E gene concentrations and both pH and turbidity. These results suggest that wastewater signal increases with the census of infected individuals, in which the majority are asymptomatic, with a statistically significant (p-value <0.05) temporal correlation. The study design can be utilized as a platform for rapid trend tracking of SARS-CoV-2 variants and other diseases circulating in various communities.
Asunto(s)
COVID-19 , SARS-CoV-2 , COVID-19/epidemiología , Humanos , ARN Viral/genética , SARS-CoV-2/genética , Universidades , Aguas Residuales , Monitoreo Epidemiológico Basado en Aguas ResidualesRESUMEN
Self-contamination during doffing of personal protective equipment (PPE) is a concern for healthcare workers (HCW) following SARS-CoV-2-positive patient care. Staff may subconsciously become contaminated through improper glove removal; so, quantifying this exposure is critical for safe working procedures. HCW surface contact sequences on a respiratory ward were modeled using a discrete-time Markov chain for: IV-drip care, blood pressure monitoring, and doctors' rounds. Accretion of viral RNA on gloves during care was modeled using a stochastic recurrence relation. In the simulation, the HCW then doffed PPE and contaminated themselves in a fraction of cases based on increasing caseload. A parametric study was conducted to analyze the effect of: (1a) increasing patient numbers on the ward, (1b) the proportion of COVID-19 cases, (2) the length of a shift, and (3) the probability of touching contaminated PPE. The driving factors for the exposure were surface contamination and the number of surface contacts. The results simulate generally low viral exposures in most of the scenarios considered including on 100% COVID-19 positive wards, although this is where the highest self-inoculated dose is likely to occur with median 0.0305 viruses (95% CI =0-0.6 viruses). Dose correlates highly with surface contamination showing that this can be a determining factor for the exposure. The infection risk resulting from the exposure is challenging to estimate, as it will be influenced by the factors such as virus variant and vaccination rates.
Asunto(s)
Contaminación del Aire Interior , COVID-19 , Fómites , Exposición Profesional , Equipo de Protección Personal , Fómites/virología , Guantes Protectores/virología , Hospitales , Humanos , Equipo de Protección Personal/virología , SARS-CoV-2RESUMEN
Cured-in-place pipes (CIPPs) are plastic liners manufactured inside existing damaged sanitary sewer, storm sewer, and water pipes that extend the service life of host pipes. This process often is conducted in neighborhoods and near roadways. Before, during, and after plastic manufacture, waste materials that include volatile materials are released into the air. Emissions from this manufacturing process can affect outdoor air quality and indoor air quality for buildings connected to the sewer system. We identified key issues and solicited stakeholder feedback to estimate and manage public health risks of CIPP-generated chemical air pollution. A work group representing 13 U.S. agencies and public health associations provided feedback and prioritized public health issues for action. To mitigate potential public and occupational health risks, additional testing and public health educational efforts were recommended. An improved understanding of CIPP chemical exposure pathways, as well as stakeholder needs and interests, is essential.
RESUMEN
For over 150 years, bronchoscopy, especially flexible bronchoscopy, has been a mainstay for airway inspection, the diagnosis of airway lesions, therapeutic aspiration of airway secretions, and transbronchial biopsy to diagnose parenchymal lung disorders. Its utility for the diagnosis of peripheral pulmonary nodules and therapeutic treatments besides aspiration of airway secretions, however, has been limited. Challenges to the wider use of flexible bronchoscopy have included difficulty in navigating to the lung periphery, the avoidance of vasculature structures when performing diagnostic biopsies, and the ability to biopsy a lesion under direct visualization. The last 10-15 years have seen major advances in thoracic imaging, navigational platforms to direct the bronchoscopist to lung lesions, and the ability to visualize lesions during biopsy. Moreover, multiple new techniques have either become recently available or are currently being investigated to treat a broad range of airway and lung parenchymal diseases, such as asthma, emphysema, and chronic bronchitis, or to alleviate recurrent exacerbations. New bronchoscopic therapies are also being investigated to not only diagnose, but possibly treat, malignant peripheral lung nodules. As a result, flexible bronchoscopy is now able to provide a new and expanding armamentarium of diagnostic and therapeutic tools to treat patients with a variety of lung diseases. This State-of-the-Art review succinctly reviews these techniques and provides clinicians an organized approach to their role in the diagnosis and treatment of a range of lung diseases.
Asunto(s)
Broncoscopía/métodos , Enfermedades Pulmonares/diagnóstico por imagen , Enfermedades Pulmonares/terapia , Broncoscopía/instrumentación , Broncoscopía/tendencias , HumanosRESUMEN
First responders may have high SARS-CoV-2 infection risks due to working with potentially infected patients in enclosed spaces. The study objective was to estimate infection risks per transport for first responders and quantify how first responder use of N95 respirators and patient use of cloth masks can reduce these risks. A model was developed for two Scenarios: an ambulance transport with a patient actively emitting a virus in small aerosols that could lead to airborne transmission (Scenario 1) and a subsequent transport with the same respirator or mask use conditions, an uninfected patient; and remaining airborne SARS-CoV-2 and contaminated surfaces due to aerosol deposition from the previous transport (Scenario 2). A compartmental Monte Carlo simulation model was used to estimate the dispersion and deposition of SARS-CoV-2 and subsequent infection risks for first responders, accounting for variability and uncertainty in input parameters (i.e., transport duration, transfer efficiencies, SARS-CoV-2 emission rates from infected patients, etc.). Infection risk distributions and changes in concentration on hands and surfaces over time were estimated across sub-Scenarios of first responder respirator use and patient cloth mask use. For Scenario 1, predicted mean infection risks were reduced by 69%, 48%, and 85% from a baseline risk (no respirators or face masks used) of 2.9 × 10-2 ± 3.4 × 10-2 when simulated first responders wore respirators, the patient wore a cloth mask, and when first responders and the patient wore respirators or a cloth mask, respectively. For Scenario 2, infection risk reductions for these same Scenarios were 69%, 50%, and 85%, respectively (baseline risk of 7.2 × 10-3 ± 1.0 × 10-2). While aerosol transmission routes contributed more to viral dose in Scenario 1, our simulations demonstrate the ability of face masks worn by patients to additionally reduce surface transmission by reducing viral deposition on surfaces. Based on these simulations, we recommend the patient wear a face mask and first responders wear respirators, when possible, and disinfection should prioritize high use equipment.
Asunto(s)
COVID-19/transmisión , Transmisión de Enfermedad Infecciosa de Paciente a Profesional/prevención & control , Máscaras/virología , Respiradores N95/virología , SARS-CoV-2 , Aerosoles , Microbiología del Aire , Ambulancias , COVID-19/prevención & control , Simulación por Computador , Socorristas , Contaminación de Equipos , Humanos , Método de Montecarlo , Dispositivos de Protección Respiratoria/virología , Conducta de Reducción del Riesgo , Transporte de PacientesRESUMEN
This study develops novel dose-response models for Naegleria fowleri from selected peer-reviewed experiments on the virulence based on the intranasal exposure pathway. One data set measured the response of mice intranasally inoculated with the amebae and the other study addressed the response of mice swimming in N. fowleri infected water. The measured response for both studies was death. All experimental data were best fit by the beta-Poisson dose-response model. The three swimming experiments could be pooled, and this is the final recommended model with an LD50 of 13,257 amebae. The results of this study provide a better estimate of the probability of the risk to N. fowleri exposure than the previous models developed based on an intravenous exposure. An accurate dose-response model is the first step in quantifying the risk of free-living amebae like N. fowleri, which pose risks in recreational environments and have been detected in drinking water and premise plumbing systems. A better understanding of this risk will allow for risk management that limits the ability for pathogen growth, proliferation, and exposure.
Asunto(s)
Naegleria fowleri , Amebiasis , Amoeba , Animales , Ratones , Natación , VirulenciaRESUMEN
Middle Eastern respiratory syndrome, an emerging viral infection with a global case fatality rate of 35.5%, caused major outbreaks first in 2012 and 2015, though new cases are continuously reported around the world. Transmission is believed to mainly occur in healthcare settings through aerosolized particles. This study uses Quantitative Microbial Risk Assessment to develop a generalizable model that can assist with interpreting reported outbreak data or predict risk of infection with or without the recommended strategies. The exposure scenario includes a single index patient emitting virus-containing aerosols into the air by coughing, leading to short- and long-range airborne exposures for other patients in the same room, nurses, healthcare workers, and family visitors. Aerosol transport modeling was coupled with Monte Carlo simulation to evaluate the risk of MERS illness for the exposed population. Results from a typical scenario show the daily mean risk of infection to be the highest for the nurses and healthcare workers (8.49 × 10-4 and 7.91 × 10-4 , respectively), and the lowest for family visitors and patients staying in the same room (3.12 × 10-4 and 1.29 × 10-4 , respectively). Sensitivity analysis indicates that more than 90% of the uncertainty in the risk characterization is due to the viral concentration in saliva. Assessment of risk interventions showed that respiratory masks were found to have a greater effect in reducing the risks for all the groups evaluated (>90% risk reduction), while increasing the air exchange was effective for the other patients in the same room only (up to 58% risk reduction).
Asunto(s)
Infecciones por Coronavirus/transmisión , Coronavirus del Síndrome Respiratorio de Oriente Medio , Modelos Biológicos , Aerosoles , Microbiología del Aire , Simulación por Computador , Infecciones por Coronavirus/epidemiología , Infecciones por Coronavirus/virología , Infección Hospitalaria/epidemiología , Infección Hospitalaria/prevención & control , Infección Hospitalaria/transmisión , Brotes de Enfermedades/estadística & datos numéricos , Personal de Salud , Humanos , Transmisión de Enfermedad Infecciosa de Paciente a Profesional/prevención & control , Transmisión de Enfermedad Infecciosa de Paciente a Profesional/estadística & datos numéricos , Máscaras , Método de Montecarlo , República de Corea/epidemiología , Medición de Riesgo/métodos , Medición de Riesgo/estadística & datos numéricos , Gestión de Riesgos , Saliva/virologíaRESUMEN
Norovirus accounts for a large portion of the gastroenteritis disease burden, and outbreaks have occurred in a wide variety of environments. Understanding the role of fomites in norovirus transmission will inform behavioral interventions, such as hand washing and surface disinfection. The purpose of this study was to estimate the contribution of fomite-mediated exposures to infection and illness risks in outbreaks. A simulation model in discrete time that accounted for hand-to-porous surfaces, hand-to-nonporous surfaces, hand-to-mouth, -eyes, -nose, and hand washing events was used to predict 17 hr of simulated human behavior. Norovirus concentrations originated from monitoring contamination levels on surfaces during an outbreak on houseboats. To predict infection risk, two dose-response models (fractional Poisson and 2F1 hypergeometric) were used to capture a range of infection risks. A triangular distribution describing the conditional probability of illness given an infection was multiplied by modeled infection risks to estimate illness risks. Infection risks ranged from 70.22% to 72.20% and illness risks ranged from 21.29% to 70.36%. A sensitivity analysis revealed that the number of hand-to-mouth contacts and the number of hand washing events had strong relationships with model-predicted doses. Predicted illness risks overlapped with leisure setting and environmental attack rates reported in the literature. In the outbreak associated with the viral concentrations used in this study, attack rates ranged from 50% to 86%. This model suggests that fomites may have accounted for 25% to 82% of illnesses in this outbreak. Fomite-mediated exposures may contribute to a large portion of total attack rates in outbreaks involving multiple transmission modes. The findings of this study reinforce the importance of frequent fomite cleaning and hand washing, especially when ill persons are present.
Asunto(s)
Infecciones por Caliciviridae/transmisión , Brotes de Enfermedades , Fómites/virología , Norovirus/aislamiento & purificación , Simulación por Computador , Gastroenteritis/virología , Mano/virología , Desinfección de las Manos , Humanos , NavíosRESUMEN
Environmentally mediated infectious disease transmission models provide a mechanistic approach to examining environmental interventions for outbreaks, such as water treatment or surface decontamination. The shift from the classical SIR framework to one incorporating the environment requires codifying the relationship between exposure to environmental pathogens and infection, i.e. the dose-response relationship. Much of the work characterizing the functional forms of dose-response relationships has used statistical fit to experimental data. However, there has been little research examining the consequences of the choice of functional form in the context of transmission dynamics. To this end, we identify four properties of dose-response functions that should be considered when selecting a functional form: low-dose linearity, scalability, concavity, and whether it is a single-hit model. We find that i) middle- and high-dose data do not constrain the low-dose response, and different dose-response forms that are equally plausible given the data can lead to significant differences in simulated outbreak dynamics; ii) the choice of how to aggregate continuous exposure into discrete doses can impact the modeled force of infection; iii) low-dose linear, concave functions allow the basic reproduction number to control global dynamics; and iv) identifiability analysis offers a way to manage multiple sources of uncertainty and leverage environmental monitoring to make inference about infectivity. By applying an environmentally mediated infectious disease model to the 1993 Milwaukee Cryptosporidium outbreak, we demonstrate that environmental monitoring allows for inference regarding the infectivity of the pathogen and thus improves our ability to identify outbreak characteristics such as pathogen strain.
Asunto(s)
Brotes de Enfermedades , Transmisión de Enfermedad Infecciosa , Modelos Biológicos , Biología Computacional , Criptosporidiosis , Cryptosporidium , HumanosRESUMEN
Microbial dose response modelling is vital to a well-characterized microbial risk estimate. Dose response modelling is an inherently multidisciplinary field, which collates knowledge and data from disparate scientific fields. This multidisciplinary nature presents a key challenge to the expansion of microbial dose response modelling into new groups of researchers and modelers. This research employs a dose response optimization R code used in 18 peer-reviewed research studies to develop a multi-functional dose response software. The underlying R code performs an optimization of the two primary dose response models using the MLE method and outputs statistical analyses of the fits and bootstrapped uncertainty information for the models. VizDR (Visual Dose Response) was developed to provide microbial dose response modelling capabilities to a larger audience. VizDR is programmed in JavaScript with underlying Python scripts for intercommunication with Rserve. VizDR allows for dose response model visualization and optimization of a user's own experimental data.
RESUMEN
Quantitative microbial risk assessment (QMRA) is a powerful decision analytics tool, yet it faces challenges when modeling health risks for the indoor environment. One limitation is uncertainty in fomite recovery for evaluating the efficiency of decontamination. Addressing this data gap has become more important as a result of response and recovery from a potential malicious pathogen release. To develop more accurate QMRA models, recovery efficiency from non-porous fomites (aluminum, ceramic, glass, plastic, steel, and wood laminate) was investigated. Fomite material, surface area (10, 100, and 900 cm(2)), recovery tool (swabs and wipes), initial concentration on the fomites and eluent (polysorbate 80, trypticase soy broth, and beef extract) were evaluated in this research. Recovery was shown to be optimized using polysorbate 80, sampling with wipes, and sampling a surface area of 10-100 cm(2). The QMRA model demonstrated, through a relative risk comparison, the need for recovery efficiency to be used in these models to prevent underestimated risks.
Asunto(s)
Fómites , Virus , Bacterias/efectos de los fármacos , Humanos , Medición de Riesgo , Manejo de EspecímenesRESUMEN
Mycobacterium avium subspecies paratuberculosis (MAP) causes chronic inflammation of the intestines in humans, ruminants, and other species. It is the causative agent of Johne's disease in cattle, and has been implicated as the causative agent of Crohn's disease in humans. To date, no quantitative microbial risk assessment (QMRA) for MAP utilizing a dose-response function exists. The objective of this study is to develop a nested dose-response model for infection from oral exposure to MAP utilizing data from the peer-reviewed literature. Four studies amenable to dose-response modeling were identified in the literature search and optimized to the one-parameter exponential or two-parameter beta-Poisson dose-response models. A nesting analysis was performed on all permutations of the candidate data sets to determine the acceptability of pooling data sets across host species. Three of four data sets exhibited goodness of fit to at least one model. All three data sets exhibited good fit to the beta-Poisson model, and one data set exhibited goodness of fit, and best fit, to the exponential model. Two data sets were successfully nested using the beta-Poisson model with parameters α = 0.0978 and N50 = 2.70 × 10(2) CFU. These data sets were derived from sheep and red deer host species, indicating successful interspecies nesting, and demonstrate the highly infective nature of MAP. The nested dose-response model described should be used for future QMRA research regarding oral exposure to MAP.
Asunto(s)
Antituberculosos/farmacología , Modelos Biológicos , Mycobacterium avium subsp. paratuberculosis/efectos de los fármacos , Relación Dosis-Respuesta a Droga , Medición de Riesgo , Especificidad de la EspecieRESUMEN
The effect of bioaerosol size was incorporated into predictive dose-response models for the effects of inhaled aerosols of Francisella tularensis (the causative agent of tularemia) on rhesus monkeys and guinea pigs with bioaerosol diameters ranging between 1.0 and 24 µm. Aerosol-size-dependent models were formulated as modification of the exponential and ß-Poisson dose-response models and model parameters were estimated using maximum likelihood methods and multiple data sets of quantal dose-response data for which aerosol sizes of inhaled doses were known. Analysis of F. tularensis dose-response data was best fit by an exponential dose-response model with a power function including the particle diameter size substituting for the rate parameter k scaling the applied dose. There were differences in the pathogen's aerosol-size-dependence equation and models that better represent the observed dose-response results than the estimate derived from applying the model developed by the International Commission on Radiological Protection (ICRP, 1994) that relies on differential regional lung deposition for human particle exposure.
Asunto(s)
Aerosoles/química , Antibacterianos/administración & dosificación , Francisella tularensis/efectos de los fármacos , Animales , Relación Dosis-Respuesta a Droga , ConejosRESUMEN
Quantitative microbial risk assessment (QMRA) is a growing interdisciplinary field addressing exposures to microbial pathogens and infectious disease processes. Risk science is inherently interdisciplinary, but few of the contributing disciplinary programs offer courses and training specifically in QMRA. To develop multidisciplinary training in QMRA, an annual 10-day long intensive workshop was conducted from 2015 to 2019-the Quantitative Microbial Risk Assessment Interdisciplinary Instructional Institute (QMRA III). National leaders in the fields of public health, engineering, microbiology, epidemiology, communications, public policy, and QMRA served as instructors and mentors over the course of the program. To provide cross-training, multidisciplinary teams of 5-6 trainees were created from the approximately 30 trainees each year. A formal assessment of the program was performed based on observations and surveys containing Likert-type scales and open-ended prompts. In addition, a longitudinal alumni survey was also disseminated to facilitate the future redevelopment of QMRA institutes and determine the impact of the program. Across all years, trainees experienced statistically significant increases (P < 0.05) in their perceptions of their QMRA abilities (e.g., use of specific computer programs) and knowledge of QMRA constructs (e.g., risk management). In addition, 12 publications, three conference presentations, and two research grants were derived from the QMRA III institute projects or tangential research. The success of QMRA III indicates that a short course format can effectively address many multidisciplinary training needs. Key features of QMRA III, including the inter-disciplinary training approach, hands-on exercises, real-world institute projects, and interaction through a mentoring process, were vital for training multidisciplinary teams housing multiple forms of expertise. Future QMRA institutes are being redeveloped to leverage hybrid learning formats that can further the multidisciplinary training and mentoring objectives.
RESUMEN
Healthcare associated infections (HAIs) are costly but preventable. A limited understanding of the effects of environmental cleaning on the riskiest HAI associated pathogens is a current challenge in HAI prevention. This project aimed to quantify the effects of terminal hospital cleaning practices on HAI pathogens via environmental sampling in three hospitals located throughout the United States. Surfaces were swabbed from 36 occupied patient rooms with a laboratory-confirmed, hospital- or community-acquired infection of at least one of the four pathogens of interest (i.e., Acinetobacter baumannii (A. baumannii), methicillin resistant Staphylococcus aureus (MRSA), vancomycin resistant Enterococcus faecalis/faecium (VRE), and Clostridioides difficile (C. difficile)). Six nonporous, high touch surfaces (i.e., chair handrail, bed handrail, nurse call button, desk surface, bathroom counter near the sink, and a grab bar near the toilet) were sampled in each room for Adenosine Triphosphate (ATP) and the four pathogens of interest before and after terminal cleaning. The four pathogens of interest were detected on surfaces before and after terminal cleaning, but their levels were generally reduced. Overall, C. difficile was confirmed on the desk (n = 2), while MRSA (n = 24) and VRE (n = 25) were confirmed on all surface types before terminal cleaning. After cleaning, only MRSA (n = 6) on bed handrail, chair handrail, and nurse call button and VRE (n = 5) on bathroom sink, bed handrail, nurse call button, toilet grab bar, and C. difficile (n = 1) were confirmed. At 2 of the 3 hospitals, pathogens were generally reduced by >99% during terminal cleaning. One hospital showed that VRE increased after terminal cleaning, MRSA was reduced by 73% on the nurse call button, and VRE was reduced by only 50% on the bathroom sink. ATP detections did not correlate with any pathogen concentration. This study highlights the importance of terminal cleaning and indicates room for improvement in cleaning practices to reduce surface contamination throughout hospital rooms.
Asunto(s)
Clostridioides difficile , Infección Hospitalaria , Staphylococcus aureus Resistente a Meticilina , Habitaciones de Pacientes , Infección Hospitalaria/microbiología , Infección Hospitalaria/prevención & control , Humanos , Staphylococcus aureus Resistente a Meticilina/aislamiento & purificación , Clostridioides difficile/aislamiento & purificación , Servicio de Limpieza en Hospital , Acinetobacter baumannii/aislamiento & purificación , Control de Infecciones/métodos , Enterococos Resistentes a la Vancomicina/aislamiento & purificaciónRESUMEN
Ultraviolet disinfection is a promising solution for decentralized drinking water systems such as communal water taps. A potential health risk is enzymatic photorepair of pathogens after UV disinfection, which can result in regrowth of pathogens. Even though photorepair is a known issue, no formal risk assessments have been conducted for photorepair after UV disinfection in drinking water. The main objective was to construct a quantitative microbial risk assessment (QMRA) of photorepair after UV disinfection of drinking water in a decentralized system. UV disinfection and photorepair kinetics for E. coli were modelled using reproducible fluence-based determinations. Impacts of water collection patterns, and wavelength-dependent water container material transmittance, sunlight intensity, and photorepair enzyme absorbance were quantified. After UV disinfection by 16 or 40 mJ/cm2 of < 5-log microorganisms per L, risk of infection did not exceed 1-in-10,000 under conditions permitting E. coli photorepair. Risk from photorepair was less than 1-in-10,000 for photorepair light exposure < 0.75 h throughout the day for UV fluence 16 mJ/cm2 or greater. UV disinfection followed by solar disinfection surpassing photoreactivation during storage reduced risk below 1-in-10,000 for photorepair light exposure > 2.5 h between modelled times of 9 AM - 3 PM. The model can be expanded to other pathogens as UV fluence and photorepair fluence response kinetics become available, and this QMRA can be used to inform the placement of community water access points to reduce risk of photorepair and ensure adequate shelf life of UV disinfected water under safe storage conditions.