Rubber Oxygenase Degradation Assay by UV-Labeling and Gel Permeation Chromatography.

A versatile and robust end-group derivatization approach using oximes has been developed for the detection of oxidative degradation of synthetic polyisoprenes and polybutadiene. This method demonstrates broad applicability, effectively monitoring degradation across a wide molecular weight range through ultraviolet (UV)-detection coupled to gel permeation chromatography. Importantly, it enables the effective monitoring of degradation via derivatization-induced UV-maximum shifts, even in the presence of an excess of undegraded polyene, overcoming limitations previously reported with refractive index detectors. Notably, this oxime-based derivatization methodology is used in enzymatic degradation experiments of synthetic polyisoprenes characterized by a cis: trans ratio with the rubber oxygenase LcpK30. It reveals substantial UV absorption in derivatized enzymatic degradation products of polyisoprene with molecular weights exceeding 1000 g mol-1 - an unprecedented revelation for this enzyme's activity on such synthetic polyisoprenes. This innovative approach holds promise as a valuable tool for advancing research into the degradation of synthetic polyisoprenes and polybutadiene, particularly under conditions of low organocatalytic or enzymatic degradation activity. With its broad applicability and capacity to reveal previously hidden degradation processes, it represents a noteworthy contribution to sustainable polymer chemistry.

Light-Controlled Biocatalysis by Unspecific Peroxygenases with Genetically Encoded Photosensitizers.

Fungal unspecific peroxygenases (UPOs) have gained substantial attention for their versatile oxyfunctionalization chemistry paired with impressive catalytic capabilities. A major drawback, however, remains their sensitivity towards their co-substrate hydrogen peroxide, necessitating the use of smart in situ hydrogen peroxide generation methods to enable efficient catalysis setups. Herein, we introduce flavin-containing protein photosensitizers as a new general tool for light-controlled in situ hydrogen peroxide production. By genetically fusing flavin binding fluorescent proteins and UPOs, we have created two virtually self-sufficient photo-enzymes (PhotUPO). Subsequent testing of a versatile substrate panel with the two divergent PhotUPOs revealed two stereoselective conversions. The catalytic performance of the fusion protein was optimized through enzyme and substrate loading variation, enabling up to 24300 turnover numbers (TONs) for the sulfoxidation of methyl phenyl sulfide. The PhotUPO concept was upscaled to a 100 mg substrate preparative scale, enabling the extraction of enantiomerically pure alcohol products.

Tryptamine Synthesis by Iron Porphyrin Catalyzed C-H Functionalization of Indoles with Diazoacetonitrile.

The functionalization of C-H bonds with non-precious metal catalysts is an important research area for the development of efficient and sustainable processes. Herein, we describe the development of iron porphyrin catalyzed reactions of diazoacetonitrile with N-heterocycles yielding important precursors of tryptamines, along with experimental mechanistic studies and proof-of-concept studies of an enzymatic process with YfeX enzyme. By using readily available FeTPPCl, we achieved the highly efficient C-H functionalization of indole and indazole heterocycles. These transformations feature mild reaction conditions, excellent yields with broad functional group tolerance, can be conducted on gram scale, and thus provide a unique streamlined access to tryptamines.

Expanding an Efficient, Electrically Driven and CNT-Tagged P450 System into the Third Dimension: A Nanowired CNT-Containing and Enzyme-Stabilising 3 D Sol-Gel Electrode.

Although electrochemically catalysed P450 reactions have been described, their efficiency and applicability remained limited. This is mostly due to low enzyme activity, laborious protein immobilisation and the small electrode surface. We established a novel protein immobilisation method for a determined orientation and electrical wiring of the enzyme without post-expression modification. By genetic introduction of an anchor-peptide our method is applicable for screening medium to large mutant libraries and detection by an electrode system. The system was expanded by using wired carbon nanotubes within a sol-gel matrix to create a three dimensional electrode.

Glycosylation characterization of human and porcine fibrinogen proteins by lectin-binding biophotonic microarray imaging.

Lectin binding has been studied using the particle plasmon light-scattering properties of gold nanoparticles printed into an array format. Performance of the kinetic assay is evaluated from a detailed analysis of the binding of concanavalin A (ConA) and wheat germ agglutinin (WGA) to their target monosaccharides indicating affinity constants in the order of KD ∼10 nM for the lectin-monosaccharide interaction. The detection limits for the lectins following a 200 s injection time were determined as 10 ng/mL or 0.23 nM and 100 ng/mL or 0.93 nM, respectively. Subsequently, a nine-lectin screen was performed on the porcine and human fibrinogen glycoproteins. The observed spectra of lectin-protein specific binding rates result in characteristic patterns that evidently correlate with the structure of the glycans and allow one to distinguish between glycosylation of the porcine and human fibrinogens. The array technology has the potential to perform a multilectin screen of large numbers of proteins providing information on protein glycosylation and their microheterogeneity.

Enzymatic reactions on immobilised substrates.

This review gives an overview of enzymatic reactions that have been conducted on substrates attached to solid surfaces. Such biochemical reactions have become more important with the drive to miniaturisation and automation in chemistry, biology and medicine. Technical aspects such as choice of solid surface and analytical methods are discussed and examples of enzyme reactions that have been successful on these surfaces are provided.

Secretion and directed evolution of unspecific peroxygenases in S. cerevisiae.

Yeast-based secretion systems are advantageous for engineering highly interesting enzymes that are not or barely producible in E. coli. The herein-presented production setup facilitates high-throughput screening as no cell lysis is required. All techniques are described in detail, with access to freely available online tools and all vectors have been made available on the non-profit plasmid repository AddGene. We describe the method for UPOs as a model enzyme, showcasing their secretion, detection, and evolution using S. cerevisiae. Additional material to transfer this to P. pastoris has been published by our group previously (Püllmann & Weissenborn, 2021).

Chemoenzymatic synthesis of O-mannosylpeptides in solution and on solid phase.

O-mannosyl glycans are known to play an important role in regulating the function of α-dystroglycan (α-DG), as defective glycosylation is associated with various phenotypes of congenital muscular dystrophy. Despite the well-established biological significance of these glycans, questions regarding their precise molecular function remain unanswered. Further biological investigation will require synthetic methods for the generation of pure samples of homogeneous glycopeptides with diverse sequences. Here we describe the first total syntheses of glycopeptides containing the tetrasaccharide NeuNAcα2-3Galß1-4GlcNAcß1-2Manα, which is reported to be the most abundant O-mannosyl glycan on α-DG. Our approach is based on biomimetic stepwise assembly from the reducing end and also gives access to the naturally occurring mono-, di-, and trisaccharide substructures. In addition to the total synthesis, we have developed a "one-pot" enzymatic cascade leading to the rapid synthesis of the target tetrasaccharide. Finally, solid-phase synthesis of the desired glycopeptides directly on a gold microarray platform is described.

Crystal structure of a soluble form of human CD73 with ecto-5'-nucleotidase activity.

CD73 is a dimeric ecto-5'-nucleotidase that is expressed on the exterior side of the plasma membrane. CD73 has important regulatory functions in the extracellular metabolism of certain nucleoside monophosphates, in particular adenosine monophosphate, and has been linked to a number of pathological conditions such as cancer and myocardial ischaemia. Here, we present the crystal structure of a soluble form of human soluble CD73 (sCD73) at 2.2 Å resolution, a truncated form of CD73 that retains ecto-5'-nucleotidase activity. With this structure we obtained insight into the dimerisation of CD73, active site architecture, and a sense of secondary modifications of the protein. The crystal structure reveals a conserved loop that is directly involved in the dimer-dimer interaction showing that the two subunits of the dimer are not linked by disulfide bridges. Using biophotonic microarray imaging we were able to confirm glycosylation of the enzyme and show that the enzyme is decorated with a variety of oligosaccharide structures. The crystal structure of sCD73 will aid the design of inhibitors or activator molecules for the treatment of several diseases and prove useful in explaining the possible roles of single nucleotide polymorphisms in physiology and disease.

Dual purpose S-trityl-linkers for glycoarray fabrication on both polystyrene and gold.

There is a wide range of immobilisation reactions to tether substrates to a variety of surfaces for array-based analysis. Most of these immobilisation strategies are specific for a particular surface and require an additional linker to be attached to the substrate or the surface. Furthermore, the analysis of functionalised surfaces is often restricted to certain analytical techniques and therefore, different immobilisation strategies for different surfaces are desirable. Here we have tested an S-tritylated linker for non-covalent or covalent immobilisation of mannosides to polystyrene or gold surfaces. S-Tritylated mannosides with varying linkers were readily synthesised and used to add to biorepulsive maleimide-terminated preformed SAMs after in situ deprotection of the S-trityl group. In addition, S-tritylated mannosides themselves formed stable glycoarrays on polystyrene microtiter plates. The glycoarrays were successfully analysed by MALDI-ToF mass spectrometry, SPR spectroscopy, and interrogated with GFP-transfected Escherichia coli cells. This work has shown that a dual purpose linker can be used on multiple surfaces to form arrays allowing for different testing as well as analytical approaches.

Formation of carbohydrate-functionalised polystyrene and glass slides and their analysis by MALDI-TOF MS.

Glycans functionalised with hydrophobic trityl groups were synthesised and adsorbed onto polystyrene and glass slides in an array format. The adsorbed glycans could be analysed directly on these minimally conducting surfaces by MALDI-TOF mass spectrometry analysis after aluminium tape was attached to the underside of the slides. Furthermore, the trityl group appeared to act as an internal matrix and no additional matrix was necessary for the MS analysis. Thus, trityl groups can be used as simple hydrophobic, noncovalently linked anchors for ligands on surfaces and at the same time facilitate the in situ mass spectrometric analysis of such ligands.

Valorization of Small Alkanes by Biocatalytic Oxyfunctionalization.

The oxidation of alkanes into valuable chemical products is a vital reaction in organic synthesis. This reaction, however, is challenging, owing to the inertness of C-H bonds. Transition metal catalysts for C-H functionalization are frequently explored. Despite chemical alternatives, nature has also evolved powerful oxidative enzymes (e. g., methane monooxygenases, cytochrome P450 oxygenases, peroxygenases) that are capable of transforming C-H bonds under very mild conditions, with only the use of molecular oxygen or hydrogen peroxide as electron acceptors. Although progress in alkane oxidation has been reviewed extensively, little attention has been paid to small alkane oxidation. The latter holds great potential for the manufacture of chemicals. This Minireview provides a concise overview of the most relevant enzyme classes capable of small alkanes (C<6 ) oxyfunctionalization, describes the essentials of the catalytic mechanisms, and critically outlines the current state-of-the-art in preparative applications.

Improving the Heterologous Production of Fungal Peroxygenases through an Episomal Pichia pastoris Promoter and Signal Peptide Shuffling System.

Fungal peroxygenases (UPOs) have emerged as oxyfunctionalization catalysts of tremendous interest in recent years. However, their widespread use in the field of biocatalysis is still hampered by their challenging heterologous production, substantially limiting the panel of accessible enzymes for investigation and enzyme engineering. Building upon previous work on UPO production in yeast, we have developed a combined promoter and signal peptide shuffling system for episomal high throughput UPO production in the industrially relevant, methylotrophic yeast Pichia pastoris. Eleven endogenous and orthologous promoters were shuffled with a diverse set of 17 signal peptides. Three previously described UPOs were selected as first test set, leading to the identification of beneficial promoter/signal peptide combinations for protein production. We applied the system then successfully to produce two novel UPOs: MfeUPO from Myceliophthora fergusii and MhiUPO from Myceliophthora hinnulea. To demonstrate the feasibility of the developed system to other enzyme classes, it was applied for the industrially relevant lipase CalB and the laccase Mrl2. In total, approximately 3200 transformants of eight diverse enzymes were screened and the best promoter/signal peptide combinations studied at various cofeeding, derepression, and induction conditions. High volumetric production titers were achieved by subsequent creation of stable integration lines and harnessing orthologous promoters from Hansenula polymorpha. In most cases promising yields were also achieved without the addition of methanol under derepressed conditions. To foster the use of the episomal high throughput promoter/signal peptide Pichia pastoris system, we made all plasmids available through Addgene.

Accessing Chemo- and Regioselective Benzylic and Aromatic Oxidations by Protein Engineering of an Unspecific Peroxygenase.

Unspecific peroxygenases (UPOs) enable oxyfunctionalizations of a broad substrate range with unparalleled activities. Tailoring these enzymes for chemo- and regioselective transformations represents a grand challenge due to the difficulties in their heterologous productions. Herein, we performed protein engineering in Saccharomyces cerevisiae using the MthUPO from Myceliophthora thermophila. More than 5300 transformants were screened. This protein engineering led to a significant reshaping of the active site as elucidated by computational modelling. The reshaping was responsible for the increased oxyfunctionalization activity, with improved k cat/K m values of up to 16.5-fold for the model substrate 5-nitro-1,3-benzodioxole. Moreover, variants were identified with high chemo- and regioselectivities in the oxyfunctionalization of aromatic and benzylic carbons, respectively. The benzylic hydroxylation was demonstrated to perform with enantioselectivities of up to 95% ee. The proposed evolutionary protocol and rationalization of the enhanced activities and selectivities acquired by MthUPO variants represent a step forward toward the use and implementation of UPOs in biocatalytic synthetic pathways of industrial interest.

A modular two yeast species secretion system for the production and preparative application of unspecific peroxygenases.

Fungal unspecific peroxygenases (UPOs) represent an enzyme class catalysing versatile oxyfunctionalisation reactions on a broad substrate scope. They are occurring as secreted, glycosylated proteins bearing a haem-thiolate active site and rely on hydrogen peroxide as the oxygen source. However, their heterologous production in a fast-growing organism suitable for high throughput screening has only succeeded once-enabled by an intensive directed evolution campaign. We developed and applied a modular Golden Gate-based secretion system, allowing the first production of four active UPOs in yeast, their one-step purification and application in an enantioselective conversion on a preparative scale. The Golden Gate setup was designed to be universally applicable and consists of the three module types: i) signal peptides for secretion, ii) UPO genes, and iii) protein tags for purification and split-GFP detection. The modular episomal system is suitable for use in Saccharomyces cerevisiae and was transferred to episomal and chromosomally integrated expression cassettes in Pichia pastoris. Shake flask productions in Pichia pastoris yielded up to 24 mg/L secreted UPO enzyme, which was employed for the preparative scale conversion of a phenethylamine derivative reaching 98.6 % ee. Our results demonstrate a rapid, modular yeast secretion workflow of UPOs yielding preparative scale enantioselective biotransformations.

Preparation of aminoethyl glycosides for glycoconjugation.

The synthesis of a number of aminoethyl glycosides of cell-surface carbohydrates, which are important intermediates for glycoarray synthesis, is described. A set of protocols was developed which provide these intermediates, in a short number of steps, from commercially available starting materials.

Golden Mutagenesis: An efficient multi-site-saturation mutagenesis approach by Golden Gate cloning with automated primer design.

Site-directed methods for the generation of genetic diversity are essential tools in the field of directed enzyme evolution. The Golden Gate cloning technique has been proven to be an efficient tool for a variety of cloning setups. The utilization of restriction enzymes which cut outside of their recognition domain allows the assembly of multiple gene fragments obtained by PCR amplification without altering the open reading frame of the reconstituted gene. We have developed a protocol, termed Golden Mutagenesis that allows the rapid, straightforward, reliable and inexpensive construction of mutagenesis libraries. One to five amino acid positions within a coding sequence could be altered simultaneously using a protocol which can be performed within one day. To facilitate the implementation of this technique, a software library and web application for automated primer design and for the graphical evaluation of the randomization success based on the sequencing results was developed. This allows facile primer design and application of Golden Mutagenesis also for laboratories, which are not specialized in molecular biology.

Modulating proposed electron transfer pathways in P450BM3 led to improved activity and coupling efficiency.

Electrochemical in vitro reduction of P450 enzymes is a promising alternative to in vivo applications. Previously we presented three engineered P450BM3 variants for aniline hydroxylation, equipped with a carbon nanotube binding-peptide (CNT-tag) for self-assembly on CNT electrodes. Compared to wildtype P450BM3 the NADPH-dependent activity was enhanced, but the coupling efficiency remained low. For P450BM3 Verma, Schwaneberg and Roccatano (2014, Biopolymers 101, 197-209) calculated putative electron transfer pathways (eTPs) by MD simulations. We hypothesised that knockouts of these transfer pathways would alter the coupling efficiency of the system. The results revealed no improved system for the electrically-driven P450s. For the NADPH-driven P450s, however, the most active eTP-mutant showed a 13-fold increased activity and a 32-fold elevated coupling efficiency using NADPH as reducing equivalent. This suggests an alternative principle of electron transport for the reduction by NADPH and an electrode, respectively. The work presents moreover a tool to improve the coupling and activity of P450s with non-natural substrates.

Development of a Solid Phase Array Assay for the Screening of Galactose Oxidase Activity and for Fast Identification of Inhibitors.

BACKGROUND: Galactose oxidase (GOase) catalyses the highly selective oxidation of terminal galactosides on a wide range of natural glycoconjugates and has found wide applications in biotechnology - particularly in biocatalysis. GOase is copper dependent and uses oxygen to oxidise the C6-primary alcohol of galactose and produces hydrogen peroxide. The enzyme activity can be conveniently assessed by a colorimetric assay. OBJECTIVES: The objective of the present study was to develop an assay system, which is independent of the hydrogen peroxide formation to identify possible fluorinated GOase inhibitors. In case that the inhibitor bears a primary or secondary alcohol, it could also be oxidised by the enzyme. In such case, the colorimetric assay is not able to distinguish between substrate and inhibitor, since oxidation of both molecules would result in the formation of hydrogen peroxide. METHODS: D-galactose (D-Gal) was immobilised onto a gold surface functionalised by selfassembled monolayers (SAMs,). A GOase solution was then added to the surface in a droplet for a certain period of time and thereafter washed away. The activity of GOase on the immobilised D-Gal can then be quantified by MALDI-ToF MS. RESULTS: For inhibition studies, GOase was incubated together with 62.5 mM of deoxy-fluorinated monosaccharides on the D-Gal displaying platform. Five deoxy-fluorinated D-Gal showed a >50% inhibition of its activity. The array system has been moreover utilised to determine the apparent IC50 value of 3-F-Gal 15 as a proof of principle. CONCLUSION: The developed array platform allows the fast identification of GOase substrates and inhibitors from a library of deoxy-fluorinated sugars using MALDI-ToF MS as a label-free readout method. In addition, the enzymatic reaction enables for the in situ activation of sugar-coated surfaces to bioorthogonal aldehydes, which can be utilised for subsequent chemical modifications.

Whole-cell microtiter plate screening assay for terminal hydroxylation of fatty acids by P450s.

A readily available galactose oxidase (GOase) variant was used to develop a whole cell screening assay. This endpoint detection system was applied in a proof-of-concept approach by screening a focussed mutant library. This led to the discovery of the thus far most active P450 Marinobacter aquaeolei mutant catalysing the terminal hydroxylation of fatty acids.