Simulating Assembly Landscapes for Comprehensive Understanding of Supramolecular Polymer-Solvent Systems.

Complexity in supramolecular polymer systems arises from interactions between different components, including solvent molecules. By varying their concentration or temperature in such multicomponent systems, complex phenomena can occur such as thermally bisignate and dilution-induced assembly of supramolecular polymers. Herein, we demonstrate that both these phenomena emerge from the same underlying interaction mechanism between the components. As a model system, amide-decorated supramolecular polymers of porphyrins were investigated in combination with aliphatic alcohols as hydrogen-bond scavengers, and thermodynamic mass-balance models were applied to map the three-dimensional assembly landscapes. These studies unveiled that the interaction between hydrogen-bond scavengers and monomers is temperature-dependent and becomes dominant at high monomer concentrations. With these insights, we could exploit competitive monomer-alcohol interactions to prompt the dilution-induced assembly of various common monomers as well as bisignate assembly events. Moreover, kinetic insights were obtained by navigating through the assembly landscape. Similar to phase diagrams of covalent polymers, these assembly landscapes provide a comprehensive picture of supramolecular polymerizations, which helps to precisely regulate the system properties. The generality of this approach using assembly landscapes makes it relevant for any supramolecular system, and this enhanced control will open the door to build complex and functional supramolecular polymer systems.

Unraveling the Complexity of Supramolecular Copolymerization Dictated by Triazine-Benzene Interactions.

Supramolecular copolymers formed by the noncovalent synthesis of multiple components expand the complexity of functional molecular systems. However, varying the composition and microstructure of copolymers through tuning the interactions between building blocks remains a challenge. Here, we report a remarkable discovery of the temperature-dependent supramolecular copolymerization of the two chiral monomers 4,4',4″-(1,3,5-triazine-2,4,6-triyl)tribenzamide (S-T) and 4,4',4″-(benzene-1,3,5-triyl)tribenzamide (S-B). We first demonstrate in the homopolymerization of the two individual monomers that a subtle change from the central triazine to benzene in the chemical structure of the monomers significantly affects the properties of the resulting homopolymers in solution. Homopolymers formed by S-T exhibit enhanced stability in comparison to S-B. More importantly, through a combination of spectroscopic analysis and theoretical simulation, we reveal the complex process of copolymerization: S-T aggregates into homopolymers at elevated temperature, and upon slow cooling S-B gradually intercalates into the copolymers, to finally give copolymers with almost 80% alternating bonds at 10 °C. The formation of the predominantly alternating copolymers is plausibly contributed by preferred heterointeractions between triazine and benzene cores in S-T and S-B, respectively, at lower temperatures. Overall, this work unravels the complexity of a supramolecular copolymerization process where an intermediate heterointeraction (higher than one homointeraction and lower than the other homointeraction) presents and proposes a general method to elucidate the microstructures of copolymers responsive to temperature changes.

Consequences of Amide Connectivity in the Supramolecular Polymerization of Porphyrins: Spectroscopic Observations Rationalized by Theoretical Modelling.

The correlation between molecular structure and mechanism of supramolecular polymerizations is a topic of great interest, with a special focus on the pathway complexity of porphyrin assemblies. Their cooperative polymerization typically yields highly ordered, long 1D polymers and is driven by a combination of π-stacking due to solvophobic effects and hydrogen bonding interactions. Subtle changes in molecular structure, however, have significant influence on the cooperativity factor and yield different aggregate types (J- versus H-aggregates) of different lengths. In this study, the influence of amide connectivity on the self-assembly behavior of porphyrin-based supramolecular monomers was investigated. While in nonpolar solvents, C=O centered monomers readily assemble into helical supramolecular polymers via a cooperative mechanism, their NH centered counterparts form short, non-helical J-type aggregates via an isodesmic pathway. A combination of spectroscopy and density functional theory modelling sheds light on the molecular origins causing this stunning difference in assembly properties and demonstrates the importance of molecular connectivity in the design of supramolecular systems. Finally, their mutual interference in copolymerization experiments is presented.

Photodynamic Control of the Chain Length in Supramolecular Polymers: Switching an Intercalator into a Chain Capper.

Supramolecular systems are intrinsically dynamic and sensitive to changes in molecular structure and external conditions. Because of these unique properties, strategies to control polymer length, composition, comonomer sequence, and morphology have to be developed for sufficient control over supramolecular copolymerizations. We designed photoresponsive, mono acyl hydrazone functionalized benzene-1,3,5-tricarboxamide (m-BTA) monomers that play a dual role in the coassembly with achiral alkyl BTAs (a-BTA). In the E isomer form, the chiral m-BTA monomers intercalate into stacks of a-BTA and dictate the chirality of the helices. Photoisomerization to the Z isomer transforms the intercalator into a chain capper, allowing dynamic shortening of chain length in the supramolecular aggregates. We combine optical spectroscopy and light-scattering experiments with theoretical modeling to show the reversible decrease in length when switching from the E to Z isomer of m-BTA in the copolymer with inert a-BTA. With a mass-balance thermodynamic model, we gain additional insights into the composition of copolymers and length distributions of the species over a broad range of concentrations and mixing ratios of a-BTA/m-BTA. Moreover, the model was used to predict the impact of an additive (chain capper and intercalator) on the chain length over a range of concentrations, showing a remarkable amplification of efficiency at high concentrations. By employing a stimuli-responsive comonomer in a mostly inert polymer, we can cooperatively amplify the effect of the switching and obtain photocontrol of polymer length. Moreover, this dynamic decrease in chain length causes a macroscopic gel-to-sol phase transformation of the copolymer gel, although 99.4% of the organogel is inert to the light stimulus.

Polyacid microgels with adaptive hydrophobic pockets and ampholytic character: synthesis, solution properties and insights into internal nanostructure by cryogenic-TEM.

Microgels with internal and reconfigurable complex nanostructure are emerging as possible adaptive particles, yet they remain challenging to design synthetically. Here, we report the synthesis of highly charged poly(methacrylic acid) (PMAA) microgels incorporating permanent (poly(methyl methacrylate) (PMMA)) and switchable hydrophobic pockets (poly(N,N'-diethylaminoethyl methacrylate) (PDEAEMA)) via emulsion polymerization. We demonstrate detailed tuning of the size, crosslinking density and tailored incorporation of functional comonomers into the polyacid microgels. Analysis via cryo-TEM and pyrene probe measurements reveal switchable hydrophobic pockets inside the microgels as a function of pH. The particles show a rich diversity of internal phase-segregation, that adapts to the surrounding conditions. Large amounts of hydrophobic pockets even lead to hydrophobic bridging between particles. The study shows ways towards tailored polyelectrolyte microgels with narrow dispersity, high charge density, as well as tailored and reconfigurable hydrophobic compartments and interactions.

Biocatalytic Feedback-Driven Temporal Programming of Self-Regulating Peptide Hydrogels.

Switchable self-assemblies respond to external stimuli with a transition between near-equilibrium states. Although being a key to present-day advanced materials, these systems respond rather passively, and do not display autonomous dynamics. For autonomous behavior, approaches must be found to orchestrate the time domain of self-assemblies, which would lead to new generations of dynamic and self-regulating materials. Herein, we demonstrate catalytic control of the time domain of pH-responsive peptide hydrogelators in a closed system. We program transient acidic pH states by combining a fast acidic activator with the slow, enzymatic, feedback-driven generation of a base (dormant deactivator). This transient state can be programmed over orders of magnitude in time. It is coupled to dipeptides to create autonomously self-regulating, dynamic gels with programmed lifetimes, which are used for fluidic guidance, burst release, and self-erasing rapid prototyping.

Unusual Photophysical Properties of Porphyrin-Based Supramolecular Polymers Unveiled: The Role of Metal Ligands and Side Group Amide Connectivity.

Supramolecular polymers based on porphyrins are an interesting model system, since the self-assembly and thus the photophysics can be modified by the chemical structure of the porphyrins, e.g., by a metal inserted in the ligand or by different (solubilizing) side groups. Here, we investigate the photophysical properties of supramolecular polymers based on free-base and Zn-centered porphyrins, each with different amide connectivity in the side chains, by absorption and (time-resolved) photoluminescence spectroscopy on solutions. We find that for all porphyrin derivatives the B-band absorption of supramolecular polymers is a superposition of H- and J-type aggregate spectra, while the Q-band absorption indicates only J-type aggregation. The emission of supramolecular polymers stems exclusively from the Q-band and shows only J-type behavior. For supramolecular polymers based on the free-base porphyrins, we identify only a single aggregate species, whereas for Zn-centered porphyrins, two distinct species coexist in solution, each with a (slightly) different arrangement of monomers. We rationalize this complex behavior by a slip-stacking of porphyrins along the direction of one of the two B-band transition dipole moments, resulting in simultaneous H- and J-type intermolecular coupling in the B-band. In the Q-band, with its transition dipole moments oriented 45° relative to the corresponding B-band moments, only J-type coupling is thus present. Our results demonstrate that the self-assembly and the photophysics of supramolecular polymers based on porphyrins can only be fully understood if spectral information from all bands is considered.

Controlling the length of porphyrin supramolecular polymers via coupled equilibria and dilution-induced supramolecular polymerization.

Multi-component systems often display convoluted behavior, pathway complexity and coupled equilibria. In recent years, several ways to control complex systems by manipulating the subtle balances of interaction energies between the individual components have been explored and thereby shifting the equilibrium between different aggregate states. Here we show the enantioselective chain-capping and dilution-induced supramolecular polymerization with a Zn2+-porphyrin-based supramolecular system when going from long, highly cooperative supramolecular polymers to short, disordered aggregates by adding a monotopic Mn3+-porphyrin monomer. When mixing the zinc and manganese centered monomers, the Mn3+-porphyrins act as chain-cappers for Zn2+-porphyrin supramolecular polymers, effectively hindering growth of the copolymer and reducing the length. Upon dilution, the interaction between chain-capper and monomers weakens as the equilibria shift and long supramolecular polymers form again. This dynamic modulation of aggregate morphology and length is achieved through enantioselectivity in the aggregation pathways and concentration-sensitive equilibria. All-atom and coarse-grained molecular simulations provide further insights into the mixing of the species and their exchange dynamics. Our combined experimental and theoretical approach allows for precise control of molecular self-assembly and chiral discrimination in complex systems.

Temperature-dependent modulation by biaryl-based monomers of the chain length and morphology of biphenyl-based supramolecular polymers.

Supramolecular copolymerizations offer attractive options to introduce structural and functional diversity in supramolecular polymer materials. Yet, general principles and structure-property relationships for rational comonomer design remain lacking. Here, we report on the supramolecular (co)aggregation of a phenylpyridine and bipyridine derivative of a recently reported biphenyl tetracarboxamide-based monomer. We show that both arylpyridines are poor monomers for supramolecular homopolymerizations. However, the two arylpyridines efficiently influence supramolecular polymers of a biphenyl-based polymer. The phenylpyridine derivatives primarily sequestrate biphenyl monomers, while the bipyridine intercalates into the polymers at high temperatures. Thereby, these two poorly homopolymerizing monomers allow for a fine control over the length of the biphenyl-based supramolecular polymers. As such, our results highlight the potential to control the structure and morphology of supramolecular polymers by tailoring the electronic properties of additives.

Waveguide-based chemo- and biosensors: complex emulsions for the detection of caffeine and proteins.

We report on a new modular sensing approach in which complex emulsions serve as efficient transducers in optical evanescent field-based sensing devices. Specifically, we leverage the tunable refractive index upon chemically triggered changes in droplet morphology or orientation. Variations in the optical coupling result in readily detectable changes in the light transmitted from a waveguide.