Biotechnological production of polyphosphate from industrial wash water.

Phosphate is mined from phosphate rock, which is a limited resource on a human time scale. For a sustainable phosphate supply, strategies for efficient use and recycling of phosphate must be developed. A German chemical company produces annually wash water containing phosphate and other inorganic substances (e.g., sodium, potassium, sulfate, and chloride) at a ton scale. Chemical precipitation is mostly used for phosphate removal. In this study, a biotechnological process utilizing Saccharomyces cerevisiae to upcycle phosphate-containing wastewater into pure sodium polyphosphate in powder form was developed. The process comprises fermentation and downstream processing (polyphosphate yields: 25% and 36%, respectively). The polyphosphate quality was independent of the wash water composition. Polyphosphate with a purity of 23% molar ratio Na to Na, K, and Mg of > 90%, and with an average chain length of 12.5 phosphate subunits was produced. The upcycled polyphosphate can be reused compared to phosphate fertilizer in many different applications. Overall, the here developed process can contribute to truly slowing down phosphate mining and finally enable a sustainable utilization of phosphate. Thereby, the benefit of the process is the cascade use of phosphate, reducing the need for phosphate rock before the phosphate ends up in the soil and ultimately in the sea.

Discovery and Biosynthesis of Antimicrobial Phenethylamine Alkaloids from the Marine Flavobacterium Tenacibaculum discolor sv11.

The bacterial genus Tenacibaculum has been associated with various ecological roles in marine environments. Members of this genus can act, for example, as pathogens, predators, or episymbionts. However, natural products produced by these bacteria are still unknown. In the present work, we investigated a Tenacibaculum strain for the production of antimicrobial metabolites. Six new phenethylamine (PEA)-containing alkaloids, discolins A and B (1 and 2), dispyridine (3), dispyrrolopyridine A and B (4 and 5), and dispyrrole (6), were isolated from media produced by the predatory bacterium Tenacibaculum discolor sv11. Chemical structures were elucidated by analysis of spectroscopic data. Alkaloids 4 and 5 exhibited strong activity against Gram-positive Bacillus subtilis DSM10, Mycobacterium smegmatis ATCC607, Listeria monocytogenes DSM20600, and Staphylococcus aureus ATCC25923, with minimum inhibitory concentration (MIC) values ranging from 0.5 to 4 µg/mL, and moderate activity against Candida albicans FH2173 and Aspergillus flavus ATCC9170. Compound 6 displayed moderate antibacterial activities against Gram-positive bacteria. Dispyrrolopyridine A (4) was active against efflux pump deficient Escherichia coli ATCC25922 ΔtolC, with an MIC value of 8 µg/mL, as well as against Caenorhabditis elegans N2 with an MIC value of 32 µg/mL. Other compounds were inactive against these microorganisms. The biosynthetic route toward discolins A and B (1 and 2) was investigated using in vivo and in vitro experiments. It comprises an enzymatic decarboxylation of phenylalanine to PEA catalyzed by DisA, followed by a nonenzymatic condensation to form the central imidazolium ring. This spontaneous formation of the imidazolium core was verified by means of a synthetic one-pot reaction using the respective building blocks. Six additional strains belonging to three Tenacibaculum species were able to produce discolins, and several DisA analogues were identified in various marine flavobacterial genera, suggesting the widespread presence of PEA-derived compounds in marine ecosystems.

18O Isotope Labeling Combined with 31P Nuclear Magnetic Resonance Spectroscopy for Accurate Quantification of Hydrolyzable Phosphorus Species in Environmental Samples.

31P nuclear magnetic resonance (NMR) spectra can be biased due to the hydrolysis of labile P species during sample treatment and NMR analysis. This paper offers an approach to circumvent this problem by performing sample preparation and analysis in 18O-enriched medium. Heavy 18O isotope atoms were introduced into the resulting artificial hydrolysis products. The NMR signal of 18O-labeled P was shifted upfield relative to the unlabeled P nuclei in natural metabolites. This isotope shift enabled an immediate differentiation of artificial hydrolysis products from natural metabolites. Moreover, the hydrolysis products could be accurately quantified. Our data suggest that the extent to which artificial hydrolysis alters NMR spectra varies among different types of environmental samples. For instance, 72-84% of the detected monoesters in the organic soils of this study were actually artificially hydrolyzed diesters. By contrast, artificial hydrolysis products in the mineral soils used for this study accounted for less than 6% of the total monoesters. Polyphosphate was also hydrolyzed to yield 18O-labeled products in algal biomass.

Methods for the Analysis of Polyphosphate in the Life Sciences.

Inorganic polyphosphate (polyP) is the polymer of orthophosphate and can be found in all living organisms. For polyP characterization, one or more of six parameters are of interest: the molecular structure (linear, cyclic, or branched), the concentration, the average chain length, the chain length distribution, the cellular localization, and the cation composition. Here, the merits, limitations, and critical parameters of the state-of-the-art methods for the analysis of the six parameters from the life sciences are discussed. With this contribution, we aim to lower the entry barrier into the analytics of polyP, a molecule with prominent, yet often incompletely understood, contributions to cellular function.

Biotechnological synthesis of water-soluble food-grade polyphosphate with Saccharomyces cerevisiae.

Inorganic polyphosphate (polyP) is the polymer of phosphate. Water-soluble polyPs with average chain lengths of 2-40 P-subunits are widely used as food additives and are currently synthesized chemically. An environmentally friendly highly scalable process to biosynthesize water-soluble food-grade polyP in powder form (termed bio-polyP) is presented in this study. After incubation in a phosphate-free medium, generally regarded as safe wild-type baker's yeast (Saccharomyces cerevisiae) took up phosphate and intracellularly polymerized it into 26.5% polyP (as KPO3 , in cell dry weight). The cells were lyzed by freeze-thawing and gentle heat treatment (10 min, 70°C). Protein and nucleic acid were removed from the soluble cell components by precipitation with 50 mM HCl. Two chain length fractions (42 and 11P-subunits average polyP chain length, purity on a par with chemically produced polyP) were obtained by fractional polyP precipitation (Fraction 1 was precipitated with 100 mM NaCl and 0.15 vol ethanol, and Fraction 2 with 1 final vol ethanol), drying, and milling. The physicochemical properties of bio-polyP were analyzed with an enzyme assay, 31 P nuclear magnetic resonance spectroscopy, and polyacrylamide gel electrophoresis, among others. An envisaged application of the process is phosphate recycling from waste streams into high-value bio-polyP.

Polyphosphate Chain Length Determination in the Range of Two to Several Hundred P-Subunits with a New Enzyme Assay and 31P NMR.

Currently, 31P NMR is the only analytical method that quantitatively determines the average chain length of long inorganic polyphosphate (>80 P-subunits). In this study, an enzyme assay is presented that determines the average chain length of polyphosphate in the range of two to several hundred P-subunits. In the enzyme assay, the average polyP chain length is calculated by dividing the total polyphosphate concentration by the concentration of the polyphosphate chains. The total polyphosphate is determined by enzymatic polyphosphate hydrolysis with Saccharomyces cerevisiae exopolyphosphatase 1 and S. cerevisiae inorganic pyrophosphatase 1, followed by colorimetric orthophosphate detection. Because the exopolyphosphatase leaves one pyrophosphate per polyphosphate chain, the polyphosphate chain concentration is assayed by coupling the enzymes exopolyphosphatase (polyP into pyrophosphate), ATP sulfurylase (pyrophosphate into ATP), hexokinase (ATP into glucose 6-phosphate), and glucose 6-phosphate dehydrogenase (glucose 6-phosphate into NADPH), followed by fluorometric NADPH detection. The ability of 31P NMR and the enzyme assay to size polyP was demonstrated with polyP lengths in the range from 2 to ca. 280 P-subunits (no polyP with a longer chain length was available). The small deviation between methods (-4 ± 4%) indicated that the new enzyme assay performed accurately. The limitations of 31P NMR (i.e., low throughput, high sample concentration, expensive instrument) are overcome by the enzyme assay that is presented here, which allows for high sample throughput and requires only a commonly available plate reader and micromole per liter concentrations of polyphosphate.

Diffusion-Ordered Nuclear Magnetic Resonance Spectroscopy (DOSY-NMR): A Novel Tool for Identification of Phosphorus Compounds in Soil Extracts.

Liquid-state, one-dimension 31P nuclear magnetic resonance spectroscopy (NMR) has greatly advanced our understanding of the composition of organic phosphorus in the environment. However, the correct assignment of signals is complicated by overlapping and shifting signals in different types of soils. We applied therefore for the first time diffusion-ordered spectroscopy (DOSY) to soil extracts, allowing us to separate phosphorus components in the second domain based on their translational diffusion coefficients. After successful application to a mixture of 14 model compounds, diffusion rates correlated closely with the molecular weight of the individual compound in aqueous solution (R2 = 0.97). The method was then applied to NaOH/EDTA extracts of a grassland soil, of which paramagnetic contaminations were removed with sodium sulfide following high-velocity centrifugation (21 500g, 45 min) at 4 °C. Diffusion rates in soil extracts were again closely related to molecular weight (R2 = 0.98), varying from 163.9 to 923.8 Da. However, our DOSY application failed for a forest soil with low organic phosphorus content. Overall, DOSY did help to clearly identify specific NMR signals like myo- and scyllo-inositol hexakisphosphate. It thus provides a more confident signal assignment than 1D 31P NMR, although currently the ubiquitous use of this novel methodology is still limited to soils with high organic phosphorus content.

Classical/Non-classical Polyoxometalate Hybrids.

Two polyanions [SeI V2 PdII4 WVI14 O56 H]11- and [SeI V4 PdII4 WVI28 O108 H12 ]12- are the first hybrid polyoxometalates in which classical (Group 5/6 metal based) and non-classical (late transition-metal based) polyoxometalate units are joined. Requiring no supporting groups, this co-condensation of polyoxotungstate and isopolyoxopalladate constituents also provides a logical link between POM-PdII coordination complexes and the young subclass of polyoxopalladates. Solid-state, solution, and gas-phase studies suggest interesting specific reactivities for these hybrids and point to several potential derivatives and functionalization strategies.

Phosphorus Containing Water Dispersible Nanoparticles in Arable Soil.

Due to the limited solubility of phosphorus (P) in soil, understanding its binding in fine colloids is vital to better forecast P dynamics and losses in agricultural systems. We hypothesized that water-dispersible P is present as nanoparticles and that iron (Fe) plays a crucial role for P binding to these nanoparticles. To test this, we isolated water-dispersible fine colloids (WDFC) from an arable topsoil (Haplic Luvisol, Germany) and assessed colloidal P forms after asymmetric flow field-flow fractionation coupled with ultraviolet and an inductively coupled plasma mass spectrometer, with and without removal of amorphous and crystalline Fe oxides using oxalate and dithionite, respectively. We found that fine colloidal P was present in two dominant sizes: (i) in associations of organic matter and amorphous Fe (Al) oxides in nanoparticles <20 nm, and (ii) in aggregates of fine clay, organic matter and Fe oxides (more crystalline Fe oxides) with a mean diameter of 170 to 225 nm. Solution P-nuclear magnetic resonance spectra indicated that the organically bound P predominantly comprised orthophosphate-monoesters. Approximately 65% of P in the WDFC was liberated after the removal of Fe oxides (especially amorphous Fe oxides). The remaining P was bound to larger-sized WDFC particles and Fe bearing phyllosilicate minerals. Intriguingly, the removal of Fe by dithionite resulted in a disaggregation of the nanoparticles, evident in higher portions of organically bound P in the <20 nm nanoparticle fraction, and a widening of size distribution pattern in larger-sized WDFC fraction. We conclude that the crystalline Fe oxides contributed to soil P sequestration by (i) acting as cementing agents contributing to soil fine colloid aggregation, and (ii) binding not only inorganic but also organic P in larger soil WDFC particles.

Tetrapalladium-containing polyoxotungstate [Pd(II)4(α-P2W15O56)2]16-: a comparative study.

The novel tetrapalladium(II)-containing polyoxometalate [Pd(II)4(α-P2W15O56)2](16-) has been prepared in aqueous medium and characterized as its hydrated sodium salt Na16[Pd4(α-P2W15O56)2]·71H2O by single-crystal XRD, elemental analysis, IR, Raman, multinuclear NMR, and UV-vis spectroscopy. The complex exists in anti and syn conformations, which form in a 2:1 ratio, and possesses unique structural characteristics in comparison with known {M4(P2W15)2} species. (31)P and (183)W NMR spectroscopy are consistent with the long-term stability of the both isomers in aqueous solutions.

Phytase blends for enhanced phosphorous mobilization of deoiled seeds.

Phytases are hydrolytic enzymes capable of a stepwise phosphate release from phytate which is the main phosphorous storage in seeds, cereals and legumes. Limitations such as low enzyme activity or incomplete phytate hydrolysis to inositol are a great challenge in phytase applications in food and feed. Herein we report a phytase blend of two enzymes with additive effects on phytate (InsP6) hydrolysis and its application in the enzymatic phosphorous recovery process. Blending the fast 6-phytase rPhyXT52 with the 3-phytase from Debaryomyces castellii, which is capable of fully hydrolyzing InsP6, we achieved rapid phosphate release with higher yields compared to the individual enzymes and a rapid disappearance of InsP6-3 intermediates, monitored by HPLC. NMR data suggest a nearly complete phytate hydrolysis to inositol and phosphate. The blend was applied for phosphate mobilization from phytate-rich biomass, such as deoiled seeds. For this emerging application, an up to 43% increased phosphate mobilization yield was achieved when using 1000 U of the blend per kg biomass compared to using only the E. coli phytase. Even so, the time of enzyme treatment was decreased by more than half (6 h instead of 16 h) when using 4000 U of blend, we reached a 78-90% reduction of the total phosphorous content in the explored deoiled seeds. In summary, the phytase blend of Dc phyt/rPhyXT52 was proven very efficient to obtain inositol phosphate depleted meal which has its potential application in animal feeding and is concomitant with the production of green phosphate from renewable resources.

Sugarcane bagasse ash as fertilizer for soybeans: Effects of added residues on ash composition, mineralogy, phosphorus extractability and plant availability.

Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K2SO4, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.

Soil phosphorus status and P nutrition strategies of European beech forests on carbonate compared to silicate parent material.

Sustainable forest management requires understanding of ecosystem phosphorus (P) cycling. Lang et al. (2017) [Biogeochemistry, https://doi.org/10.1007/s10533-017-0375-0] introduced the concept of P-acquiring vs. P-recycling nutrition strategies for European beech (Fagus sylvatica L.) forests on silicate parent material, and demonstrated a change from P-acquiring to P-recycling nutrition from P-rich to P-poor sites. The present study extends this silicate rock-based assessment to forest sites with soils formed from carbonate bedrock. For all sites, it presents a large set of general soil and bedrock chemistry data. It thoroughly describes the soil P status and generates a comprehensive concept on forest ecosystem P nutrition covering the majority of Central European forest soils. For this purpose, an Ecosystem P Nutrition Index (ENI P ) was developed, which enabled the comparison of forest P nutrition strategies at the carbonate sites in our study among each other and also with those of the silicate sites investigated by Lang et al. (2017). The P status of forest soils on carbonate substrates was characterized by low soil P stocks and a large fraction of organic Ca-bound P (probably largely Ca phytate) during early stages of pedogenesis. Soil P stocks, particularly those in the mineral soil and of inorganic P forms, including Al- and Fe-bound P, became more abundant with progressing pedogenesis and accumulation of carbonate rock dissolution residue. Phosphorus-rich impure, silicate-enriched carbonate bedrock promoted the accumulation of dissolution residue and supported larger soil P stocks, mainly bound to Fe and Al minerals. In carbonate-derived soils, only low P amounts were bioavailable during early stages of pedogenesis, and, similar to P-poor silicate sites, P nutrition of beech forests depended on tight (re)cycling of P bound in forest floor soil organic matter (SOM). In contrast to P-poor silicate sites, where the ecosystem P nutrition strategy is direct biotic recycling of SOM-bound organic P, recycling during early stages of pedogenesis on carbonate substrates also involves the dissolution of stable Ca-Porg precipitates formed from phosphate released during SOM decomposition. In contrast to silicate sites, progressing pedogenesis and accumulation of P-enriched carbonate bedrock dissolution residue at the carbonate sites promote again P-acquiring mechanisms for ecosystem P nutrition. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s10533-021-00884-7.

Link between phosphate starvation and glycogen metabolism in Corynebacterium glutamicum, revealed by metabolomics.

In this study, we analyzed the influence of phosphate (P(i)) limitation on the metabolism of Corynebacterium glutamicum. Metabolite analysis by gas chromatography-time-of-flight (GC-TOF) mass spectrometry of cells cultivated in glucose minimal medium revealed a greatly increased maltose level under P(i) limitation. As maltose formation could be linked to glycogen metabolism, the cellular glycogen content was determined. Unlike in cells grown under P(i) excess, the glycogen level in P(i)-limited cells remained high in the stationary phase. Surprisingly, even acetate-grown cells, which do not form glycogen under P(i) excess, did so under P(i) limitation and also retained it in stationary phase. Expression of pgm and glgC, encoding the first two enzymes of glycogen synthesis, phosphoglucomutase and ADP-glucose pyrophosphorylase, was found to be increased 6- and 3-fold under P(i) limitation, respectively. Increased glycogen synthesis together with a decreased glycogen degradation might be responsible for the altered glycogen metabolism. Independent from these experimental results, flux balance analysis suggested that an increased carbon flux to glycogen is a solution for C. glutamicum to adapt carbon metabolism to limited P(i) concentrations.

Tantalum(v) 1,3-propanediolate ß-diketonate solution as a precursor to sol-gel derived, metal oxide thin films.

Tantalum oxide is ubiquitous in everyday life, from capacitors in electronics to ion conductors for electrochromic windows and electrochemical storage devices. Investigations into sol-gel deposition of tantalum oxide, and its sister niobium oxide, has accelerated since the 1980s and continues to this day. The aim of this study is to synthesize a near UV sensitive, air stable, and low toxicity tantalum sol-gel precursor solution for metal oxide thin films - these attributes promise to reduce manufacturing costs and allow for facile mass production. By utilizing 1D and 2D nuclear magnetic resonance, this study shows that by removing ethanol from the precursor solution at a relatively low temperature and pressure, decomposition of the photosensitive complex can be minimized while obtaining a precursor solution with sufficient stability for storage and processing in the atmosphere. The solution described herein is further modified for inkjet printing, where multiple material characterization techniques demonstrate that the solution can be utilized in low temperature, photochemical solution deposition of tantalum oxide, which is likely amorphous. Tested substrates include amorphous silica, crystalline silicon wafer, and gold/titanium/PET foil. The hope is that these results may spark future investigations into electronic, optical, and biomedical device fabrication with tantalum oxide, and potentially niobium oxide, based films using the proposed synthesis method.

Correction: Tantalum(v) 1,3-propanediolate ß-diketonate solution as a precursor to sol-gel derived, metal oxide thin films.

[This corrects the article DOI: 10.1039/D0RA02558E.].

Conformational Sampling of the Intrinsically Disordered C-Terminal Tail of DERA Is Important for Enzyme Catalysis.

2-Deoxyribose-5-phosphate aldolase (DERA) catalyzes the reversible conversion of acetaldehyde and glyceraldehyde-3-phosphate into deoxyribose-5-phosphate. DERA is used as a biocatalyst for the synthesis of drugs such as statins and is a promising pharmaceutical target due to its involvement in nucleotide catabolism. Despite previous biochemical studies suggesting the catalytic importance of the C-terminal tyrosine residue found in several bacterial DERAs, the structural and functional basis of its participation in catalysis remains elusive because the electron density for the last eight to nine residues (i.e., the C-terminal tail) is absent in all available crystal structures. Using a combination of NMR spectroscopy and molecular dynamics simulations, we conclusively show that the rarely studied C-terminal tail of E. coli DERA (ecDERA) is intrinsically disordered and exists in equilibrium between open and catalytically relevant closed states, where the C-terminal tyrosine (Y259) enters the active site. Nuclear Overhauser effect distance restraints, obtained due to the presence of a substantial closed state population, were used to derive the solution-state structure of the ecDERA closed state. Real-time NMR hydrogen/deuterium exchange experiments reveal that Y259 is required for efficiency of the proton abstraction step of the catalytic reaction. Phosphate titration experiments show that, in addition to the phosphate-binding residues located near the active site, as observed in the available crystal structures, ecDERA contains previously unknown auxiliary phosphate-binding residues on the C-terminal tail which could facilitate in orienting Y259 in an optimal position for catalysis. Thus, we present significant insights into the structural and mechanistic importance of the ecDERA C-terminal tail and illustrate the role of conformational sampling in enzyme catalysis.

Extraneous dissolved organic matter enhanced adsorption of dibutyl phthalate in soils: Insights from kinetics and isotherms.

The widespread use of plastic film, especially in agricultural practices, has resulted in phthalic acid esters (PAEs) pollution, which poses risks for greenhouse soils. Application of composted manure is a common agricultural practice that adds extraneous dissolved organic matter (DOM) to the soil, however, the effect of extraneous DOM on the behavior of PAEs in agricultural soil is not clear. Dibutyl phthalate (DBP) was used as a model compound to investigate the effect and mechanism of extraneous DOM on the adsorption kinetics and isotherms of PAEs in two types of soils, through batch experiments and characterization of extraneous DOM and soils using fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The equilibrium adsorption amount of DBP in black soil was higher than in red soil regardless of the presence of extraneous DOM, due to the higher organic matter content of black soil. Hydrophobic partition played a dominant role in the DBP adsorption process of soils with and without extraneous DOM. The addition of DOM enhanced the adsorption capacity of DBP through partition in the two soils, especially at high DBP concentrations. Additions of a lower concentration of DOM better enhanced the adsorption effect than the higher concentrated DOM, due to an increase in water solubility of DBP resulted from excessive extraneous DOM in aqueous phase. Differences in mineral composition of soils led to diverse adsorption mechanisms of DBP as affected by additions of extraneous DOM. The FTIR spectra indicated that the intra-molecular and intermolecular hydrogen bond interactions of carboxylic acids, aromatic CC and CO in amides were involved in DBP adsorption in soils. Therefore, addition of DOM may increase adsorption of DBP in soils and thus influence its bioavailability and transformation in soils.

New 2alpha-tropane amides as potential PET ligands for the dopamine transporter.

Positron emission tomography (PET) imaging of dopamine transporter (DAT) density in the brain is a potentially valuable tool for studying the etiopathology of degenerative brain disorders. The present study evaluated five new potential competitive inhibitors of DAT as ligands for PET. The evaluation of the new compounds measured their ability to compete with the binding of the reference ligand 2beta-carbomethoxy-3beta-(4-[(131)I]iodophenyl)tropane [(131)I]beta-CIT to striatal and cortical membranes from rat and pig brain. Four of the new compounds structurally related to cocaine were synthesized in their 2alpha,3beta configuration; the most potent one, 3beta-(4-iodo-phenyl)-8-methyl-8-aza-bicyclo[3.2.1]octane-2alpha-carboxylic acid (2-fluoro-ethyl)-amide, was synthesized also in the 2beta,3beta configuration. For comparative studies in rat brain and new evaluation in pig brain homogenate, the established compounds beta-CIT, FP-CIT, PE2I and FETT were also synthesized and evaluated. Contrary to expectation, the 2alpha,3beta and 2beta,3beta isomers of 3-(4-iodo-phenyl)-8-methyl-8-aza-bicyclo[3.2.1]octane-2-carboxylic acid (2-fluoro-ethyl)-amide showed the same affinity constant for rat striatum (K(i)=200 nM+/-34), but in pig striatum and rat and pig cortex the 2alpha,3beta form even had a higher affinity than the 2beta,3beta form.

Synthesis of poly(ethylene glycol) (PEG)-grafted colloidal silica particles with improved stability in aqueous solvents.

The known grafting procedures of colloidal silica particles with poly(ethylene glycol) (PEG) lead to grafting layers that detach from the silica surface and dissolve in water within a few days. We present a new grafting procedure of PEG onto silica with a significant improvement of the stability of the grafting layers in aqueous solvents. Moreover, the procedure avoids any dry states or other circumstances leading to strong aggregation of the particles. To achieve the improved water stability, Stöber silica particles are first pre-coated with a silane coupling agent (3-aminopropyl)triethoxysilane (APS) to incorporate active amine groups. The water solubility of the pre-coating layer was minimized using a combination of APS with bis-(trimethoxysilylpropyl)amine (BTMOSPA) or bis-(triethoxysilyl)ethane (BTEOSE). These pre-coated particles were then reacted with N-succinimidyl ester of mono-methoxy poly(ethylene glycol) carboxylic acid to form PEG-grafted silica particles. The particles form stable dispersions in aqueous solutions as well as several organic solvents.