Nearest-neighbour transition-state analysis for nucleic acid kinetics.

We used stopped-flow to monitor hypochromicity for 43 oligonucleotide duplexes to study nucleic acid kinetics and extract transition-state parameters for association and dissociation. Reactions were performed in 1.0 M NaCl (for literature comparisons) and 2.2 mM MgCl2 (PCR conditions). Dissociation kinetics depended on sequence, increased exponentially with temperature, and transition-state parameters inversely correlated to thermodynamic parameters (r = -0.99). Association had no consistent enthalpic component, varied little with temperature or sequence, and poorly correlated to thermodynamic parameters (r = 0.28). Average association rates decreased 78% in MgCl2 compared to NaCl while dissociation was relatively insensitive to ionic conditions. A nearest-neighbour kinetic model for dissociation predicted rate constants within 3-fold of literature values (n = 11). However, a nearest-neighbour model for association appeared overparameterized and inadequate for predictions. Kinetic predictions were used to simulate published high-speed (<1 min) melting analysis and extreme (<2 min) PCR experiments. Melting simulations predicted apparent melting temperatures increase on average 2.4°C when temperature ramp rates increased from 0.1 to 32°C/s, compared to 2.8°C reported in the literature. PCR simulations revealed that denaturation kinetics are dependent on the thermocycling profile. Simulations overestimated annealing efficiencies at shorter annealing times and suggested that polymerase interactions contribute to primer-template complex stability at extension temperatures.

Reverse transcriptase kinetics for one-step RT-PCR.

Understanding reverse transcriptase (RT) activity is critical for designing fast one-step RT-PCRs. We report a stopped-flow assay that monitors SYBR Green I fluorescence to investigate RT activity in PCR conditions. We studied the influence of PCR conditions on RT activity and assessed the accuracy of cDNA synthesis predictions for one-step RT-PCR. Nucleotide incorporation increased from 26 to 89 s-1 between 1.5 and 6 mM MgCl2 but was largely unaffected by changes in KCl. Conversely, increasing KCl from 15 to 75 mM increased apparent rate constants for RT-oligonucleotide binding (0.010-0.026 nM-1 s-1) and unbinding (0.2-1.5 s-1). All rate constants increased between 22 and 42 °C. When evaluated by PCR quantification cycle, cDNA predictions differed from experiments using RNase H+ RT (average 1.7 cycles) and RNase H- (average 4.5 cycles). Decreasing H+ RT concentrations 10 to 104-fold from manufacturer recommendations improved cDNA predictions (average 0.8 cycles) and increased RT-PCR assay efficiency. RT activity assays and models can be used to aid assay design and improve the speed of RT-PCRs. RT type and concentration must be selected to promote rapid cDNA synthesis but minimize nonspecific amplification. We demonstrate 2-min one-step RT-PCR of a Zika virus target using reduced RT concentrations and extreme PCR.

Removal of artifact bias from qPCR results using DNA melting curve analysis.

Quantitative PCR (qPCR) allows the precise measurement of DNA concentrations and is generally considered to be straightforward and trouble free. However, analyses using validated Sybr Green I-based assays regularly amplify both the correct product and an artifact. Amplification of more than 1 product can be recognized when melting curve analysis is performed after the qPCR. Currently, such reactions need to be excluded from further analysis because the quantification result is considered meaningless. However, when the fraction of the fluorescence associated with the correct product can be determined, the quantitative result of the qPCR analysis can be corrected. The main assumptions of this correction model are: 1) the melting peak of the correct product can be identified, 2) the PCR efficiencies of all amplified products are similar, 3) the relative size of the melting peaks reflects the relative concentrations of the products, and 4) the relative concentrations do not change as the reaction reaches plateau. These assumptions were validated in a series of model experiments. The results show that the quantitative results can be corrected. Implementation of a correction for the presence of artifact amplification in the analysis of qPCR data leads to more reliable quantitative results in qPCR experiments.-Ruijter, J. M., Ruiz-Villalba, A., van den Hoff, A. J. J., Gunst, Q. D., Wittwer, C. T., van den Hoff, M. J. B. Removal of artifact bias from qPCR results using DNA melting curve analysis.

Integrated Extreme Real-Time PCR and High-Speed Melting Analysis in 52 to 87 Seconds.

BACKGROUND: Extreme PCR in <30 s and high-speed melting of PCR products in <5 s are recent advances in the turnaround time of DNA analysis. Previously, these steps had been performed on different specialized instruments. Integration of both extreme PCR and high-speed melting with real-time fluorescence monitoring for detection and genotyping is presented here. METHODS: A microfluidic platform was enhanced for speed using cycle times as fast as 1.05 s between 66.4 °C and 93.7 °C, with end point melting rates of 8 °C/s. Primer and polymerase concentrations were increased to allow short cycle times. Synthetic sequences were used to amplify fragments of hepatitis B virus (70 bp) and Clostridium difficile (83 bp) by real-time PCR and high-speed melting on the same instrument. A blinded genotyping study of 30 human genomic samples at F2 c.*97, F5 c.1601, MTHFR c.665, and MTHFR c.1286 was also performed. RESULTS: Standard rapid-cycle PCR chemistry did not produce any product when total cycling times were reduced to <1 min. However, efficient amplification was possible with increased primer (5 µmol/L) and polymerase (0.45 U/µL) concentrations. Infectious targets were amplified and identified in 52 to 71 s. Real-time PCR and genotyping of single-nucleotide variants from human DNA was achieved in 75 to 87 s and was 100% concordant to known genotypes. CONCLUSIONS: Extreme PCR with high-speed melting can be performed in about 1 min. The integration of extreme PCR and high-speed melting shows that future molecular assays at the point of care for identification, quantification, and variant typing are feasible.

The Effect of Single Mismatches on Primer Extension.

BACKGROUND: Allele-specific PCR is an important diagnostic tool that identifies single-nucleotide variants by preferential amplification of a particular allele, using primers that are mismatched to all but one allele variant. METHODS: We applied a fluorescent stopped-flow polymerase assay to measure extension rates from oligonucleotide hairpins to simulate primer-template pairs. Under PCR-applicable conditions, reaction rates were recorded in nucleotides per second per polymerase (nt/s/poly). The effects of temperature, potassium chloride, mismatch type, and position were studied with primarily a deletion mutant of Thermus aquaticus (Taq) DNA polymerase and 135 oligonucleotide sequences. RESULTS: Rates at 65 °C were between 205 ± 11 and 177 ± 8 nt/s/poly for matched templates and between 4.55 ± 0.21 and 0.008 ± 0.005 nt/s/poly for 3'-mismatched templates. Although extension rates progressively increased with mismatches further away from the 3' end, rates were still reduced by as much as 84% with a C · C mismatch 6 bases from the 3' end. The optimal extension temperature for matched sequences was 70 °C, shifting to 55-60 °C for 3' mismatches. KCl inhibited mismatch extension. The Michaelis constant (Km) was increased and the apparent unimolecular rate constant (kcat) decreased for 3' mismatches relative to matched templates. CONCLUSIONS: Although primer extension of mismatches depends on mismatch type and position, variation also depends on local sequence, KCl concentration, and the type of polymerase. Introduction of 3' mismatches reduces the optimal temperature for extension, suggesting higher annealing temperatures for better allele discrimination. Quantitative descriptions of expected specificity in allele-specific PCR provide additional design direction and suggest when other methods (e.g., high-resolution melting analysis) may be a better choice.

A "Culture" Shift: Broad Bacterial Detection, Identification, and Antimicrobial Susceptibility Testing Directly from Whole Blood.

BACKGROUND: The time required for bloodstream pathogen detection, identification (ID), and antimicrobial susceptibility testing (AST) does not satisfy the acute needs of disease management. Conventional methods take up to 3 days for ID and AST. Molecular diagnostics have reduced times for ID, but their promise to supplant culture is unmet because AST times remain slow. We developed a combined quantitative PCR (qPCR)-based ID+AST assay with sequential detection, ID, and AST of leading nosocomial bacterial pathogens. METHODS: ID+AST was performed on whole blood samples by (a) removing blood cells, (b) brief bacterial enrichment, (c) bacterial detection and ID, and (d) species-specific antimicrobial treatment. Broad-spectrum qPCR of the internal transcribed spacer between the 16S and 23S was amplified for detection. High-resolution melting identified the species with a curve classifier. AST was enabled by Ct differences between treated and untreated samples. RESULTS: A detection limit of 1 CFU/mL was achieved for Acinetobacter baumannii, Escherichia coli, Klebsiella pneumoniae, and Staphylococcus aureus. All species were accurately identified by unique melting curves. Antimicrobial minimum inhibitory concentrations were identified with Ct differences of ≥1 cycle. Using an RNA target allowed reduction of AST incubation time from 60 min to 5 min. Rapid-cycle amplification reduced qPCR times by 83% to 30 min. CONCLUSIONS: Combined, sequential ID+AST protocols allow rapid and reliable detection, ID, and AST for the diagnosis of bloodstream infections, enabling conversion of empiric to targeted therapy by the second dose of antimicrobials.

High-Speed Melting Analysis: The Effect of Melting Rate on Small Amplicon Microfluidic Genotyping.

BACKGROUND: High-resolution DNA melting analysis of small amplicons is a simple and inexpensive technique for genotyping. Microfluidics allows precise and rapid control of temperature during melting. METHODS: Using a microfluidic platform for serial PCR and melting analysis, 4 targets containing single nucleotide variants were amplified and then melted at different rates over a 250-fold range from 0.13 to 32 °C/s. Genotypes (n = 1728) were determined manually by visual inspection after background removal, normalization, and conversion to negative derivative plots. Differences between genotypes were quantified by a genotype discrimination ratio on the basis of inter- and intragenotype differences using the absolute value of the maximum vertical difference between curves as a metric. RESULTS: Different homozygous curves were genotyped by melting temperature and heterozygous curves were identified by shape. Technical artifacts preventing analysis (0.3%), incorrect (0.06%), and indeterminate (0.4%) results were minimal, occurring mostly at slow melting rates (0.13-0.5 °C/s). Genotype discrimination was maximal at around 8 °C/s (2-8 °C/s for homozygotes and 8-16 °C/s for heterozygotes), and no genotyping errors were made at rates >0.5 °C/s. PCR was completed in 10-12.2 min, followed by melting curve acquisition in 4 min down to <1 s. CONCLUSIONS: Microfluidics enables genotyping by melting analysis at rates up to 32 °C/s, requiring <1 s to acquire an entire melting curve. High-speed melting reduces the time for melting analysis, decreases errors, and improves genotype discrimination of small amplicons. Combined with extreme PCR, high-speed melting promises nucleic acid amplification and genotyping in < 1 min.

The need for transparency and good practices in the qPCR literature.

Two surveys of over 1,700 publications whose authors use quantitative real-time PCR (qPCR) reveal a lack of transparent and comprehensive reporting of essential technical information. Reporting standards are significantly improved in publications that cite the Minimum Information for Publication of Quantitative Real-Time PCR Experiments (MIQE) guidelines, although such publications are still vastly outnumbered by those that do not.

Extreme PCR: efficient and specific DNA amplification in 15-60 seconds.

BACKGROUND: PCR is a key technology in molecular biology and diagnostics that typically amplifies and quantifies specific DNA fragments in about an hour. However, the kinetic limits of PCR are unknown. METHODS: We developed prototype instruments to temperature cycle 1- to 5-µL samples in 0.4-2.0 s at annealing/extension temperatures of 62 °C-76 °C and denaturation temperatures of 85 °C-92 °C. Primer and polymerase concentrations were increased 10- to 20-fold above typical concentrations to match the kinetics of primer annealing and polymerase extension to the faster temperature cycling. We assessed analytical specificity and yield on agarose gels and by high-resolution melting analysis. Amplification efficiency and analytical sensitivity were demonstrated by real-time optical monitoring. RESULTS: Using single-copy genes from human genomic DNA, we amplified 45- to 102-bp targets in 15-60 s. Agarose gels showed bright single bands at the expected size, and high-resolution melting curves revealed single products without using any "hot start" technique. Amplification efficiencies were 91.7%-95.8% by use of 0.8- to 1.9-s cycles with single-molecule sensitivity. A 60-bp genomic target was amplified in 14.7 s by use of 35 cycles. CONCLUSIONS: The time required for PCR is inversely related to the concentration of critical reactants. By increasing primer and polymerase concentrations 10- to 20-fold with temperature cycles of 0.4-2.0 s, efficient (>90%), specific, high-yield PCR from human DNA is possible in <15 s. Extreme PCR demonstrates the feasibility of while-you-wait testing for infectious disease, forensics, and any application where immediate results may be critical.

Copy number assessment by competitive PCR with limiting deoxynucleotide triphosphates and high-resolution melting.

BACKGROUND: DNA copy number variation is associated with genetic disorders and cancer. Available methods to discern variation in copy number are typically costly, slow, require specialized equipment, and/or lack precision. METHODS: Multiplex PCR with different primer pairs and limiting deoxynucleotide triphosphates (dNTPs) (3-12 µmol/L) were used for relative quantification and copy number assessment. Small PCR products (50-121 bp) were designed with 1 melting domain, well-separated Tms, minimal internal sequence variation, and no common homologs. PCR products were displayed as melting curves on derivative plots and normalized to the reference peak. Different copy numbers of each target clustered together and were grouped by unbiased hierarchical clustering. RESULTS: Duplex PCR of a reference gene and a target gene was used to detect copy number variation in chromosomes X, Y, 13, 18, 21, epidermal growth factor receptor (EGFR), survival of motor neuron 1, telomeric (SMN1), and survival of motor neuron 2, centromeric (SMN2). Triplex PCR was used for X and Y and CFTR exons 2 and 3. Blinded studies of 50 potential trisomic samples (13, 18, 21, or normal) and 50 samples with potential sex chromosome abnormalities were concordant to karyotyping, except for 2 samples that were originally mosaics that displayed a single karyotype after growth. Large cystic fibrosis transmembrane conductance regulator (ATP-binding cassette sub-family C, member 7) (CFTR) deletions, EGFR amplifications, and SMN1 and SMN2 copy number assessments were also demonstrated. Under ideal conditions, copy number changes of 1.11-fold or lower could be discerned with CVs of about 1%. CONCLUSIONS: Relative quantification by restricting the dNTP concentration with melting curve display is a simple and precise way to assess targeted copy number variation.

Heterozygote PCR product melting curve prediction.

Melting curve prediction of PCR products is limited to perfectly complementary strands. Multiple domains are calculated by recursive nearest neighbor thermodynamics. However, the melting curve of an amplicon containing a heterozygous single-nucleotide variant (SNV) after PCR is the composite of four duplexes: two matched homoduplexes and two mismatched heteroduplexes. To better predict the shape of composite heterozygote melting curves, 52 experimental curves were compared with brute force in silico predictions varying two parameters simultaneously: the relative contribution of heteroduplex products and an ionic scaling factor for mismatched tetrads. Heteroduplex products contributed 25.7 ± 6.7% to the composite melting curve, varying from 23%-28% for different SNV classes. The effect of ions on mismatch tetrads scaled to 76%-96% of normal (depending on SNV class) and averaged 88 ± 16.4%. Based on uMelt (www.dna.utah.edu/umelt/umelt.html) with an expanded nearest neighbor thermodynamic set that includes mismatched base pairs, uMelt HETS calculates helicity as a function of temperature for homoduplex and heteroduplex products, as well as the composite curve expected from heterozygotes. It is an interactive Web tool for efficient genotyping design, heterozygote melting curve prediction, and quality control of melting curve experiments. The application was developed in Actionscript and can be found online at http://www.dna.utah.edu/hets/.

Influence of PCR reagents on DNA polymerase extension rates measured on real-time PCR instruments.

BACKGROUND: Radioactive DNA polymerase activity methods are cumbersome and do not provide initial extension rates. A simple extension rate assay would enable study of basic assumptions about PCR and define the limits of rapid PCR. METHODS: A continuous assay that monitors DNA polymerase extension using noncovalent DNA dyes on common real-time PCR instruments was developed. Extension rates were measured in nucleotides per second per molecule of polymerase. To initiate the reaction, a nucleotide analog was heat activated at 95 °C for 5 min, the temperature decreased to 75 °C, and fluorescence monitored until substrate exhaustion in 30-90 min. RESULTS: The assay was linear with time for over 40% of the reaction and for polymerase concentrations over a 100-fold range (1-100 pmol/L). Extension rates decreased continuously with increasing monovalent cation concentrations (lithium, sodium, potassium, cesium, and ammonium). Melting-temperature depressors had variable effects. DMSO increased rates up to 33%, whereas glycerol had little effect. Betaine, formamide, and 1,2-propanediol decreased rates with increasing concentrations. Four common noncovalent DNA dyes inhibited polymerase extension. Heat-activated nucleotide analogs were 92% activated after 5 min, and hot start DNA polymerases were 73%-90% activated after 20 min. CONCLUSIONS: Simple DNA extension rate assays can be performed on real-time PCR instruments. Activity is decreased by monovalent cations, DNA dyes, and most melting temperature depressors. Rational inclusion of PCR components on the basis of their effects on polymerase extension is likely to be useful in PCR, particularly rapid-cycle or fast PCR.

Genotyping accuracy of high-resolution DNA melting instruments.

BACKGROUND: High-resolution DNA melting is a closed-tube method for genotyping and variant scanning that depends on the thermal stability of PCR-generated products. Instruments vary in thermal precision, sample format, melting rates, acquisition, and software. Instrument genotyping accuracy has not been assessed. METHODS: Each genotype of the single nucleotide variant (SNV) (c.3405-29A>T) of CPS1 (carbamoyl-phosphate synthase 1, mitochondrial) was amplified by PCR in the presence of LCGreen Plus with 4 PCR product lengths. After blinding and genotype randomization, samples were melted in 10 instrument configurations under conditions recommended by the manufacturer. For each configuration and PCR product length, we analyzed 32-96 samples (depending on batch size) with both commercial and custom software. We assessed the accuracy of heterozygote detection and homozygote differentiation of a difficult, nearest-neighbor symmetric, class 4 variant with predicted ΔT(m) of 0.00 °C. RESULTS: Overall, the heterozygote accuracy was 99.7% (n = 2141), whereas homozygote accuracy was 70.3% (n = 4441). Instruments with single sample detection as opposed to full-plate imaging better distinguished homozygotes (78.1% and 61.8%, respectively, χ(2) P < 0.0005). Custom software improved accuracy over commercial software (P < 0.002), although melting protocols recommended by manufacturers were better than a constant ramp rate of 0.1 °C with an oil overlay. PCR products of 51, 100, 272, and 547 bp had accuracies of 72.3%, 83.1%, 59.8%, and 65.9%, respectively (P < 0.0005). CONCLUSIONS: High-resolution melting detects heterozygotes with excellent accuracy, but homozygote accuracy is dependent on detection mode, analysis software, and PCR product size, as well as melting temperature differences between, and variation within, homozygotes.

Microfluidic genotyping by rapid serial PCR and high-speed melting analysis.

BACKGROUND: Clinical molecular testing typically batches samples to minimize costs or uses multiplex lab-on-a-chip disposables to analyze a few targets. In genetics, multiple variants need to be analyzed, and different work flows that rapidly analyze multiple loci in a few targets are attractive. METHODS: We used a microfluidic platform tailored to rapid serial PCR and high-speed melting (HSM) to genotype 4 single nucleotide variants. A contiguous stream of master mix with sample DNA was pulsed with each primer pair for serial PCR and melting. Two study sites each analyzed 100 samples for F2 (c.*97G>A), F5 (c.1601G>A), and MTHFR (c.665C>T and c.1286A>C) after blinding for genotype and genotype proportions. Internal temperature controls improved melting curve precision. The platform's liquid-handling system automated PCR and HSM. RESULTS: PCR and HSM were completed in a total of 12.5 min. Melting was performed at 0.5 °C/s. As expected, homozygous variants were separated by melting temperature, and heterozygotes were identified by curve shape. All samples were correctly genotyped by the instrument. Follow-up testing was required on 1.38% of the assays for a definitive genotype. CONCLUSIONS: We demonstrate genotyping accuracy on a novel microfluidic platform with rapid serial PCR and HSM. The platform targets short turnaround times for multiple genetic variants in up to 8 samples. It is also designed to allow automatic and immediate reflexive or repeat testing depending on results from the streaming DNA. Rapid serial PCR provides a flexible genetic work flow and is nicely matched to HSM analysis.

Fluorescence-based temperature control for polymerase chain reaction.

The ability to accurately monitor solution temperature is important for the polymerase chain reaction (PCR). Robust amplification during PCR is contingent on the solution reaching denaturation and annealing temperatures. By correlating temperature to the fluorescence of a passive dye, noninvasive monitoring of solution temperatures is possible. The temperature sensitivity of 22 fluorescent dyes was assessed. Emission spectra were monitored and the change in fluorescence between 45 and 95°C was quantified. Seven dyes decreased in intensity as the temperature increased, and 15 were variable depending on the excitation wavelength. Sulforhodamine B (monosodium salt) exhibited a fold change in fluorescence of 2.85. Faster PCR minimizes cycling times and improves turnaround time, throughput, and specificity. If temperature measurements are accurate, no holding period is required even at rapid speeds. A custom instrument using fluorescence-based temperature monitoring with dynamic feedback control for temperature cycling amplified a fragment surrounding rs917118 from genomic DNA in 3min and 45s using 35 cycles, allowing subsequent genotyping by high-resolution melting analysis. Gold-standard thermocouple readings and fluorescence-based temperature differences were 0.29±0.17 and 0.96±0.26°C at annealing and denaturation, respectively. This new method for temperature cycling may allow faster speeds for PCR than currently considered possible.

Quasi-digital PCR: Enrichment and quantification of rare DNA variants.

Rare variant enrichment and quantification was achieved by allele-specific, competitive blocker, digital PCR for aiming to provide a noninvasive method for detecting rare DNA variants from circulating cells. The allele-specific blocking chemistry improves sensitivity and lowers assay cost over previously described digital PCR methods while the instrumentation allowed for rapid thermal cycling for faster turnaround time. Because the digital counting of the amplified variants occurs in the presence of many wild-type templates in each well, the method is called "quasi-digital PCR". A spinning disk was used to separate samples into 1000 wells, followed by rapid-cycle, allele-specific amplification in the presence of a molecular beacon that serves as both a blocker and digital indicator. Monte Carlo simulations gave similar results to Poisson distribution statistics for mean number of template molecules and provided an upper and lower bound at a specified confidence level and accounted for input DNA concentration variation. A 111 bp genomic DNA fragment including the BRAF p.V600E mutation (c.T1799A) was amplified with quasi-digital PCR using cycle times of 23 s. Dilution series confirmed that wild-type amplification was suppressed and that the sensitivity for the mutant allele was <0.01 % (43 mutant alleles amongst 500,000 wild-type alleles). The Monte Carlo method presented here is publically available on the internet and can calculate target concentration given digital data or predict digital data given target concentration.

DNA melting analysis.

Melting is a fundamental property of DNA that can be monitored by absorbance or fluorescence. PCR conveniently produces enough DNA to be directly monitored on real-time instruments with fluorescently labeled probes or dyes. Dyes monitor the entire PCR product, while probes focus on a specific locus within the amplicon. Advances in amplicon melting include high resolution instruments, saturating DNA dyes that better reveal multiple products, prediction programs for domain melting, barcode taxonomic identification, high speed microfluidic melting, and highly parallel digital melting. Most single base variants and small insertions or deletions can be genotyped by high resolution amplicon melting. High resolution melting also enables heterozygote scanning for any variant within a PCR product. A web application (uMelt, http://www.dna-utah.org) predicts amplicon melting curves with multiple domains, a useful tool for verifying intended products. Additional applications include methylation assessment, copy number determination and verification of sequence identity. When amplicon melting does not provide sufficient detail, unlabeled probes or snapback primers can be used instead of covalently labeled probes. DNA melting is a simple, inexpensive, and powerful tool with many research applications that is beginning to make its mark in clinical diagnostics.

Quantum method for fluorescence background removal in DNA melting analysis.

Fluorescent high-resolution DNA melting analysis is a robust method of genotyping and mutation scanning. However, removing background fluorescence is important for accurate classification and to correctly display helicity. Linear baseline extrapolation, commonly used with absorbance, often fails at low temperatures when fluorescence is used. A new quantum method of background removal based on the inherent decrease of fluorescence with temperature is described. Absorbance and fluorescence melting curves were compared using synthetic targets including hairpins, unlabeled probes, and a 50 bp duplex. In addition, the quantum method was compared to a previously described exponential method for analysis of genotyping data produced after polymerase chain reaction (PCR), including those from small amplicons, unlabeled probes, and snapback primers. The quantum method best matched absorbance data and predicted helicity, with the exponential method displaying low-temperature bulges and domain artifacts that can lead to incorrect genotyping. When two melting domains were widely separated, quantum analysis produced a flat baseline between domains, while exponential analysis was temperature-dependent. Both methods have little effect on the melting temperature (Tm) although some differences were significant (hairpin Tm values increased 0.7 °C by the quantum method and decreased 1.5 °C by exponential method, p = 0.01). However, peak heights on derivative plots were strongly algorithm-dependent, with exponential analysis enhancing low-temperature peaks while dampening high-temperature peaks. Quantum-analyzed fluorescence curves were a better match to absorbance data in terms of shape, area, and peak height compared to other methods, indicating that DNA helicity is best approximated by the quantum method.

Monovalent and divalent salt correction algorithms for Tm prediction--recommendations for Primer3 usage.

Primer3 is a widely used program for selection of oligonucleotide primers for PCR. The websites used for implementation of Primer3 have recently been updated. PCR requires Mg(2+)(,) which has a significant dsDNA stabilizing effect that must be taken into account when designing PCR primers. The data sets and formulas used to correct for salt concentrations have been updated in Primer3 to give better prediction of melting temperature (T(m)). The liberal combination of different formulas for monovalent and divalent salt correction can lead to different results, depending on the formula chosen by the user. Using published T(m) for 475 different oligonucleotides, it is shown that the combination of the implemented conversion of divalent to monovalent cation concentration works well with one salt correction formula but not with an alternative one. Use of a more recently described alternative formula would lead to equally good T(m) predictions if divalent cations are present. The proper selection of compatible primer pairs depends on the choice of a good combination of salt correction formulas. Currently the SantaLucia salt correction formula should be used if Mg(2+) is present. The alternative formula should be updated to its recent form for future releases.

Symmetric snapback primers for scanning and genotyping of the cystic fibrosis transmembrane conductance regulator gene.

BACKGROUND: High-resolution melting of PCR products is an efficient and analytically sensitive method to scan for sequence variation, but detected variants must still be identified. Snapback primer genotyping uses a 5' primer tail complementary to its own extension product to genotype the resulting hairpin via melting. If the 2 methods were combined to analyze the same PCR product, the residual sequencing burden could be reduced or even eliminated. METHODS: The 27 exons and neighboring splice sites of the CFTR [cystic fibrosis transmembrane conductance regulator (ATP-binding cassette sub-family C, member 7)] gene were amplified by the PCR in 39 fragments. Primers included snapback tails for genotyping 7 common variants and the 23 CFTR mutations recommended for screening by the American College of Medical Genetics. After symmetric PCR, the amplicons were analyzed by high-resolution melting to scan for variants. Then, a 5-fold excess of H2O was added to each reaction to produce intramolecular hairpins for snapback genotyping by melting. Each melting step required <10 min. Of the 133 DNA samples analyzed, 51 were from CFTR patient samples or cell lines. RESULTS: As expected, the analytical sensitivity of heterozygote detection in blinded studies was 100%. Snapback genotyping reduced the need for sequencing from 7.9% to 0.5% of PCR products; only 1 amplicon every 5 patients required sequencing to identify nonanticipated rare variants. We identified 2 previously unreported variants: c.3945A>G and c.4243-5C>T. CONCLUSIONS: CFTR analysis by sequential scanning and genotyping with snapback primers is a good match for targeted clinical genetics, for which high analytical accuracy and rapid turnaround times are important.