Biofabricating Functional Soft Matter Using Protein Engineering to Enable Enzymatic Assembly.

Biology often provides the inspiration for functional soft matter, but biology can do more: it can provide the raw materials and mechanisms for hierarchical assembly. Biology uses polymers to perform various functions, and biologically derived polymers can serve as sustainable, self-assembling, and high-performance materials platforms for life-science applications. Biology employs enzymes for site-specific reactions that are used to both disassemble and assemble biopolymers both to and from component parts. By exploiting protein engineering methodologies, proteins can be modified to make them more susceptible to biology's native enzymatic activities. They can be engineered with fusion tags that provide (short sequences of amino acids at the C- and/or N- termini) that provide the accessible residues for the assembling enzymes to recognize and react with. This "biobased" fabrication not only allows biology's nanoscale components (i.e., proteins) to be engineered, but also provides the means to organize these components into the hierarchical structures that are prevalent in life.

Controlling localization of Escherichia coli populations using a two-part synthetic motility circuit: An accelerator and brake.

Probiotics, whether taken as capsules or consumed in foods, have been regarded as safe for human use by regulatory agencies. Being living cells, they serve as "tunable" factories for the synthesis of a vast array of beneficial molecules. The idea of reprogramming probiotics to act as controllable factories, producing potential therapeutic molecules under user-specified conditions, represents a new and powerful concept in drug synthesis and delivery. Probiotics that serve as drug delivery vehicles pose several challenges, one being targeting (as seen with nanoparticle approaches). Here, we employ synthetic biology to control swimming directionality in a process referred to as "pseudotaxis." Escherichia coli, absent the motility regulator cheZ, swim sporadically, missing the traditional "run" in the run:tumble swimming paradigm. Upon introduction of cheZ in trans and its signal-generated upregulation, engineered bacteria can be "programmed" to swim toward the source of the chemical cue. Here, engineered cells that encounter sufficient levels of the small signal molecule pyocyanin, produce an engineered CheZ and swim with programmed directionality. By incorporating a degradation tag at the C-terminus of CheZ, the cells stop running when they exit spaces containing pyocyanin. That is, the engineered CheZ modified with a C-terminal extension derived from the putative DNA-binding transcriptional regulator YbaQ (RREERAAKKVA) is consumed by the ClpXP protease machine at a rate sufficient to "brake" the cells when pyocyanin levels are too low. Through this process, we demonstrate that over time, these engineered E. coli accumulate in pyocyanin-rich locales. We suggest that such approaches may find utility in engineering probiotics so that their beneficial functions can be focused in areas of principal benefit.

Conferring biological activity to native spider silk: A biofunctionalized protein-based microfiber.

Spider silk is an extraordinary material with physical properties comparable to the best scaffolding/structural materials, and as a fiber it can be manipulated with ease into a variety of configurations. Our work here demonstrates that natural spider silk fibers can also be used to organize biological components on and in devices through rapid and simple means. Micron scale spider silk fibers (5-10 µm in diameter) were surface modified with a variety of biological entities engineered with pentaglutamine tags via microbial transglutaminase (mTG). Enzymes, enzyme pathways, antibodies, and fluorescent proteins were all assembled onto spider silk fibers using this biomolecular engineering/biofabrication process. Additionally, arrangement of biofunctionalized fiber should in of itself generate a secondary level of biomolecular organization. Toward this end, as proofs of principle, spatially defined arrangement of biofunctionalized spider silk fiber was shown to generate effects specific to silk position in two cases. In one instance, arrangement perpendicular to a flow produced selective head and neck carcinoma cell capture on silk with antibodies complexed to conjugated protein G. In a second scenario, asymmetric bacterial chemotaxis arose from asymmetric conjugation of enzymes to arranged silk. Overall, the biofabrication processes used here were rapid, required no complex chemistries, were biologically benign, and also the resulting engineered silk microfibers were flexible, readily manipulated and functionally active. Deployed here in microfluidic environments, biofunctional spider silk fiber provides a means to convey complex biological functions over a range of scales, further extending its potential as a biomaterial in biotechnological settings. Biotechnol. Bioeng. 2017;114: 83-95. © 2016 Wiley Periodicals, Inc.

Quorum Sensing Desynchronization Leads to Bimodality and Patterned Behaviors.

Quorum Sensing (QS) drives coordinated phenotypic outcomes among bacterial populations. Its role in mediating infectious disease has led to the elucidation of numerous autoinducers and their corresponding QS signaling pathways. Among them, the Lsr (LuxS-regulated) QS system is conserved in scores of bacteria, and its signal molecule, autoinducer-2 (AI-2), is synthesized as a product of 1-carbon metabolism. Lsr signal transduction processes, therefore, may help organize population scale activities in numerous bacterial consortia. Conceptions of how Lsr QS organizes population scale behaviors remain limited, however. Using mathematical simulations, we examined how desynchronized Lsr QS activation, arising from cell-to-cell population heterogeneity, could lead to bimodal Lsr signaling and fractional activation. This has been previously observed experimentally. Governing these processes are an asynchronous AI-2 uptake, where positive intracellular feedback in Lsr expression is combined with negative feedback between cells. The resulting activation patterns differ from that of the more widely studied LuxIR system, the topology of which consists of only positive feedback. To elucidate differences, both QS systems were simulated in 2D, where cell populations grow and signal each other via traditional growth and diffusion equations. Our results demonstrate that the LuxIR QS system produces an 'outward wave' of autoinduction, and the Lsr QS system yields dispersed autoinduction from spatially-localized secretion and uptake profiles. In both cases, our simulations mirror previously demonstrated experimental results. As a whole, these models inform QS observations and synthetic biology designs.

Colloidal Properties of Nanoerythrosomes Derived from Bovine Red Blood Cells.

Liposomes are nanoscale containers that are typically synthesized from lipids using a high-shear process such as extrusion or sonication. While liposomes are extensively used in drug delivery, they do suffer from certain problems including limited colloidal stability and short circulation times in the body. As an alternative to liposomes, we explore a class of container structures derived from erythrocytes (red blood cells). The procedure involves emptying the inner contents of these cells (specifically hemoglobin) and resuspending the empty structures in buffer, followed by sonication. The resulting structures are termed nanoerythrosomes (NERs), i.e., they are membrane-covered nanoscale containers, much like liposomes. Cryo-transmission electron microscopy (cryo-TEM) and small-angle neutron scattering (SANS) are employed for the first time to study these NERs. The results reveal that the NERs are discrete spheres (∼110 nm diameter) with a unilamellar membrane of thickness ∼4.5 nm. Remarkably, the biconcave disc-like shape of erythrocytes is also exhibited by the NERs under hypertonic conditions. Moreover, unlike typical liposomes, NERs show excellent colloidal stability in both buffer as well as in serum at room temperature, and are also able to withstand freeze-thaw cycling. We have explored the potential for using NERs as colloidal vehicles for targeted delivery. Much like conventional liposomes, NER membranes can be decorated with fluorescent or other markers, solutes can be encapsulated in the cores of the NERs, and NERs can be targeted to specifically bind to mammalian cells. Our study shows that NERs are a promising and versatile class of nanostructures. NERs that are harvested from a patient's own blood and reconfigured for nanomedicine can potentially offer several benefits including biocompatibility, minimization of immune response, and extended circulation time in the body.

Rational design of 'controller cells' to manipulate protein and phenotype expression.

Coordination between cell populations via prevailing metabolic cues has been noted as a promising approach to connect synthetic devices and drive phenotypic or product outcomes. However, there has been little progress in developing 'controller cells' to modulate metabolic cues and guide these systems. In this work, we developed 'controller cells' that manipulate the molecular connection between cells by modulating the bacterial signal molecule, autoinducer-2, that is secreted as a quorum sensing (QS) signal by many bacterial species. Specifically, we have engineered Escherichia coli to overexpress components responsible for autoinducer uptake (lsrACDB), phosphorylation (lsrK), and degradation (lsrFG), thereby attenuating cell-cell communication among populations. Further, we developed a simple mathematical model that recapitulates experimental data and characterizes the dynamic balance among the various uptake mechanisms. This study revealed two controller 'knobs' that serve to increase AI-2 uptake: overexpression of the AI-2 transporter, LsrACDB, which controls removal of extracellular AI-2, and overexpression of the AI-2 kinase, LsrK, which increases the net uptake rate by limiting secretion of AI-2 back into the extracellular environment. We find that the overexpression of lsrACDBFG results in an extraordinarily high AI-2 uptake rate that is capable of completely silencing QS-mediated gene expression among wild-type cells. We demonstrate utility by modulating naturally occurring processes of chemotaxis and biofilm formation. We envision that 'controller cells' that modulate bacterial behavior by manipulating molecular communication, will find use in a variety of applications, particularly those employing natural or synthetic bacterial consortia.

Autonomous bacterial localization and gene expression based on nearby cell receptor density.

Escherichia coli were genetically modified to enable programmed motility, sensing, and actuation based on the density of features on nearby surfaces. Then, based on calculated feature density, these cells expressed marker proteins to indicate phenotypic response. Specifically, site-specific synthesis of bacterial quorum sensing autoinducer-2 (AI-2) is used to initiate and recruit motile cells. In our model system, we rewired E. coli's AI-2 signaling pathway to direct bacteria to a squamous cancer cell line of head and neck (SCCHN), where they initiate synthesis of a reporter (drug surrogate) based on a threshold density of epidermal growth factor receptor (EGFR). This represents a new type of controller for targeted drug delivery as actuation (synthesis and delivery) depends on a receptor density marking the diseased cell. The ability to survey local surfaces and initiate gene expression based on feature density represents a new area-based switch in synthetic biology that will find use beyond the proposed cancer model here.

Self-Healing of Recombinant Spider Silk Gel and Coating.

Self-healing properties, originating from the natural healing process, are highly desirable for the fitness-enhancing functionality of biomimetic materials. Herein, we fabricated the biomimetic recombinant spider silk by genetic engineering, in which Escherichia coli (E. coli) was employed as a heterologous expression host. The self-assembled recombinant spider silk hydrogel was obtained through the dialysis process (purity > 85%). The recombinant spider silk hydrogel with a storage modulus of ~250 Pa demonstrated autonomous self-healing and high strain-sensitive properties (critical strain ~50%) at 25 °C. The in situ small-angle X-ray scattering (in situ SAXS) analyses revealed that the self-healing mechanism was associated with the stick-slip behavior of the ß-sheet nanocrystals (each of ~2-4 nm) based on the slope variation (i.e., ~-0.4 at 100%/200% strains, and ~-0.9 at 1% strain) of SAXS curves in the high q-range. The self-healing phenomenon may occur through the rupture and reformation of the reversible hydrogen bonding within the ß-sheet nanocrystals. Furthermore, the recombinant spider silk as a dry coating material demonstrated self-healing under humidity as well as cell affinity. The electrical conductivity of the dry silk coating was ~0.4 mS/m. Neural stem cells (NSCs) proliferated on the coated surface and showed a 2.3-fold number expansion after 3 days of culture. The biomimetic self-healing recombinant spider silk gel and thinly coated surface may have good potential in biomedical applications.

Electroactive aniline tetramer-spider silks with conductive and electrochromic functionality.

Electroactive aniline tetramer-spider silk composite fibers with high conductivity and mechanical strength were developed using a dip coating method. The fabricated spider silk composite fibers retain the high mechanical strength (0.92 GPa) and unique reversible relaxation-contraction behavior of spider dragline silks. The aniline tetramer modified on the silk surface imparted electroactive properties to the composite fibers. The color of aniline tetramer/spider silk composite fibers could be controlled by applying different pH values and voltages. Furthermore, the composite fiber's resistivity could reach 186 Ω m which can conduct electrical current to light LEDs. This study could provide a valuable guideline for developing highly-conductive electrochromic spider silks for use in E-textiles.

Bacterial chemotaxis in static gradients quantified in a biopolymer membrane-integrated microfluidic platform.

Chemotaxis is a fundamental bacterial response mechanism to changes in chemical gradients of specific molecules known as chemoattractant or chemorepellent. The advancement of biological platforms for bacterial chemotaxis research is of significant interest for a wide range of biological and environmental studies. Many microfluidic devices have been developed for its study, but challenges still remain that can obscure analysis. For example, cell migration can be compromised by flow-induced shear stress, and bacterial motility can be impaired by nonspecific cell adhesion to microchannels. Also, devices can be complicated, expensive, and hard to assemble. We address these issues with a three-channel microfluidic platform integrated with natural biopolymer membranes that are assembled in situ. This provides several unique attributes. First, a static, steady and robust chemoattractant gradient was generated and maintained. Second, because the assembly incorporates assembly pillars, the assembled membrane arrays connecting nearby pillars can be created longer than the viewing window, enabling a wide 2D area for study. Third, the in situ assembled biopolymer membranes minimize pressure and/or chemiosmotic gradients that could induce flow and obscure chemotaxis study. Finally, nonspecific cell adhesion is avoided by priming the polydimethylsiloxane (PDMS) microchannel surfaces with Pluronic F-127. We demonstrated chemotactic migration of Escherichia coli as well as Pseudomonas aeruginosa under well-controlled easy-to-assemble glucose gradients. We characterized motility using the chemotaxis partition coefficient (CPC) and chemotaxis migration coefficient (CMC) and found our results consistent with other reports. Further, random walk trajectories of individual cells in simple bright field images were conveniently tracked and presented in rose plots. Velocities were calculated, again in agreement with previous literature. We believe the biopolymer membrane-integrated platform represents a facile and convenient system for robust quantitative assessment of cellular motility in response to various chemical cues.

Electroaddressing agarose using Fmoc-phenylalanine as a temporary scaffold.

Electroaddressing, the use of imposed electrical stimuli to guide assembly, is attractive because electrical stimuli can be conveniently applied with high spatial and temporal resolution. Several electroaddressing mechanisms have been reported in which electrode-induced pH gradients trigger stimuli-responsive materials to undergo localized sol-gel transitions to form hydrogel matrices. A common feature of existing hydrogel electrodeposition mechanisms is that the deposited matrix retains residual charged, acidic, or basic (macro)molecules. Here, we report that pH-responsive fluorenyl-9-methoxycarbonyl-phenylalanine (Fmoc-Phe) can be used to codeposit the neutral and thermally responsive polysaccharide agarose. Upon cooling, an agarose network is generated and Fmoc-Phe can be removed. The Fmoc-Phe-mediated codeposition of agarose is simple, rapid, spatially selective, and allows for the electroaddressing of a bioactive matrix.

Localized Proteolysis for the Construction of Intracellular Asymmetry in Escherichia coli.

Protein-level regulations have gained importance in building synthetic circuits, as they offer a potential advantage in the speed of operation compared to gene regulation circuits. In nature, localized protein degradation is prevalent in polarizing cellular signaling. We, therefore, set out to systematically investigate whether localized proteolysis can be employed to construct intracellular asymmetry in Escherichia coli. We demonstrate that, by inserting a cognate cleavage site between the reporter and C-terminal degron, the unstable reporter can be stabilized in the presence of the tobacco etch virus protease. Furthermore, the split protease can be functionally reconstituted by the PopZ-based polarity system to exert localized proteolysis. Selective stabilization of the unstable reporter at the PopZ pole can lead to intracellular asymmetry in E. coli. Our study provides complementary evidence to support that localized proteolysis may be a strategy for polarization in developmental cell biology. Circuits designed in this study may also help to expand the synthetic biology repository for the engineering of synthetic morphogenesis, particularly for processes that require rapid control of local protein abundance.

Bioelectronic control of a microbial community using surface-assembled electrogenetic cells to route signals.

We developed a bioelectronic communication system that is enabled by a redox signal transduction modality to exchange information between a living cell-embedded bioelectronics interface and an engineered microbial network. A naturally communicating three-member microbial network is 'plugged into' an external electronic system that interrogates and controls biological function in real time. First, electrode-generated redox molecules are programmed to activate gene expression in an engineered population of electrode-attached bacterial cells, effectively creating a living transducer electrode. These cells interpret and translate electronic signals and then transmit this information biologically by producing quorum sensing molecules that are, in turn, interpreted by a planktonic coculture. The propagated molecular communication drives expression and secretion of a therapeutic peptide from one strain and simultaneously enables direct electronic feedback from the second strain, thus enabling real-time electronic verification of biological signal propagation. Overall, we show how this multifunctional bioelectronic platform, termed a BioLAN, reliably facilitates on-demand bioelectronic communication and concurrently performs programmed tasks.

Autonomous induction of recombinant proteins by minimally rewiring native quorum sensing regulon of E. coli.

Quorum sensing (QS) enables an individual bacterium's metabolic state to be communicated to and ultimately control the phenotype of an emerging population. Harnessing the hierarchical nature of this signal transduction process may enable the exploitation of individual cell characteristics to direct or "program" entire populations of cells. We re-engineered the native QS regulon so that individual cell signals (autoinducers) are used to guide high level expression of recombinant proteins in E. coli populations. Specifically, the autoinducer-2 (AI-2) QS signal initiates and guides the overexpression of green fluorescent protein (GFP), chloramphenicol acetyl transferase (CAT) and beta-galactosidase (LacZ). The new process requires no supervision or input (e.g., sampling for optical density measurement, inducer addition, or medium exchange) and represents a low-cost, high-yield platform for recombinant protein production. Moreover, rewiring a native signal transduction circuit exemplifies an emerging class of metabolic engineering approaches that target regulatory functions.

Biofabricating a Silk Scaffold as a Functional Microbial Trap.

Silk fibroin produced from silkworms has been intensively utilized as a scaffold material for a variety of biotechnological applications owing to its remarkable mechanical strength, extensibility, biocompatibility, and ease of biofunctionalization. In this research, we engineered silk as a novel trap platform capable of capturing microorganisms. Specifically, we first fabricated the silk material into a silk sponge by lyophilization, yielding a 3D scaffold with porous microstructures. The sponge stability in water was significantly improved by ethanol treatment with elevated ß-sheet content and crystallinity of silk. Next, we biofunctionalized the silk sponge with a poly-specific microbial targeting molecule, ApoH (apolipoprotein H), to enable a novel silk-based microbial trap. The recombinant ApoH engineered with an additional penta-tyrosine was assembled onto the silk sponge through the horseradish peroxidase (HRP) mediated dityrosine cross-linking. Last, the ApoH-decorated silk sponge was demonstrated to be functional in capturing our model microorganism targets, E. coli and norovirus-like particles. We envision that this biofabricated silk platform, capable of trapping a variety of microbial entities, could serve as a versatile scaffold for rapid isolation and enrichment of microbial samples toward future diagnostics and therapeutics. This strategy, in turn, can expedite advancing future biodevices with functionality and sustainability.

Mentalising and conversation-following in autism.

Some people with autism spectrum disorders have been observed to experience difficulties with making correct inferences in conversations in social situations. However, the nature and origin of their problem is rarely investigated. This study used manipulations of video stimuli to investigate two questions. The first question was whether it is the number of people involved in social situations, that is, the source of problems in following conversations, or whether it is the increased mentalising demands required to comprehend interactions between several people. The second question asked was whether the nature and pattern of the errors that autism spectrum disorder participants show are the same as typically developing people make when they make an error. In total, 43 typically developed adults and 30 adults diagnosed with autism spectrum disorder were studied. We found that it was the amount of mentalising required, rather than the number of people involved, which caused problems for people with autism spectrum disorder in following conversations. Furthermore, the autism spectrum disorder participants showed a more heterogeneous pattern of errors, showing less agreement among themselves than the typically developed group as to which test items were hardest. So, fully understanding the observed behaviour consequent upon weakness in mentalising ability in people with autism spectrum disorders requires consideration of factors other than mentalising.

Electrospun Hydrophobic Polyaniline/Silk Fibroin Electrochromic Nanofibers with Low Electrical Resistance.

Electronic textiles (E-textiles) have been an area of intense industrial and academic research for years due to their advanced applications. Thus, the goal of this study was to develop highly conductive silk fibroin electrochromic nanofibers for use in E-textiles. The silk nanofibers were prepared by an electrospinning technique, and the conductive polyaniline (PANI) was added to impart the electrical conductivity and electroactive property to the resultant electrospun silk composite nanofibers. The experimental results showed that tuning the electrospinning procedure could control the morphology of the composite nanofibers, thus altering their mechanical properties and surface wettability. Furthermore, the developed PANI/silk composite fibers possess electroactive and electrochromic properties, such as adjusting the applied voltage. The developed strategy demonstrated the feasibility of incorporating not only electrical functionality but also electroactivity into sustainable silk nanofibers using electrospinning technique.

A Silk Fibroin Based Hydration Accelerator for Root Canal Filling Materials.

Mineral trioxide aggregate (MTA) is widely used in various dental endodontic applications such as root-end filling, furcal perforation repair, and vital pulp therapy. In spite of many attempts to improve handling properties and reduce the discoloration of MTA, the ideal root canal filling material has yet to be fully developed. The objective of this study was to investigate the setting time, mechanical properties, and biocompatibility of MTA set by a silk fibroin solution. A 5 wt% silk fibroin (SF) solution (a novel hydration accelerant) was used to set SavDen® MTA and ProRoot® white MTA (WMTA). Changes in setting time, diametral tensile strength (DTS), material crystallization, in vitro cell viability, and cell morphology were assessed by Vicat needle measurement, a universal testing machine, scanning electron microscopy (SEM), and WST-1 assay, respectively. The initial setting time of ProRoot® MTA and SavDen® MTA experienced a drastic decrease of 83.9% and 42.1% when deionized water was replaced by 5 wt% SF solution as the liquid phase. The DTS of SavDen® MTA showed a significant increase after set by the SF solution in 24 h. A human osteoblast-like cell (MG-63)-based WST-1 assay revealed that both ProRoot® MTA and SavDen® MTA hydrated using SF solution did not significantly differ (p > 0.05) in cell viability. MG-63 cells with pseudopodia attachments and nuclear protrusions represent a healthier and more adherent status on the surface of MTA when set with SF solution. The results suggest that the 5 wt% SF solution may be used as an alternative hydration accelerant for MTA in endodontic applications.

Hydrothermal Effect on Mechanical Properties of Nephila pilipes Spidroin.

The superlative mechanical properties of spider silk and its conspicuous variations have instigated significant interest over the past few years. However, current attempts to synthetically spin spider silk fibers often yield an inferior physical performance, owing to the improper molecular interactions of silk proteins. Considering this, herein, a post-treatment process to reorganize molecular structures and improve the physical strength of spider silk is reported. The major ampullate dragline silk from Nephila pilipes with a high ß-sheet content and an adequate tensile strength was utilized as the study material, while that from Cyrtophora moluccensis was regarded as a reference. Our results indicated that the hydrothermal post-treatment (50-70 °C) of natural spider silk could effectively induce the alternation of secondary structures (random coil to ß-sheet) and increase the overall tensile strength of the silk. Such advantageous post-treatment strategy when applied to regenerated spider silk also leads to an increment in the strength by ~2.5-3.0 folds, recapitulating ~90% of the strength of native spider silk. Overall, this study provides a facile and effective post-spinning means for enhancing the molecular structures and mechanical properties of as-spun silk threads, both natural and regenerated.

Biofabrication of antibodies and antigens via IgG-binding domain engineered with activatable pentatyrosine pro-tag.

We report the assembly of seven different antibodies (and two antigens) into functional supramolecular structures that are specifically designed to facilitate integration into devices using entirely biologically based bottom-up fabrication. This is enabled by the creation of an engineered IgG-binding domain (HG3T) with an N-terminal hexahistidine tag that facilitates purification and a C-terminal enzyme-activatable pentatyrosine "pro-tag" that facilitates covalent coupling to the pH stimuli-responsive polysaccharide, chitosan. Because we confer pH-stimuli responsiveness to the IgG-binding domain, it can be electrodeposited or otherwise assembled into many configurations. Importantly, we demonstrate the loading of both HG3T and antibodies can be achieved in a linear fashion so that quantitative assessment of antibodies and antigens is feasible. Our demonstration formats include: conventional multiwell plates, micropatterned electrodes, and fiber networks. We believe biologically based fabrication (i.e., biofabrication) provides bottom-up hierarchical assembly of a variety of nanoscale components for applications that range from point-of-care diagnostics to smart fabrics.