High-Performance Up-Conversion Photodetectors with Zero-Barrier Interconnection via Self-Assembled Surface Dipoles.

The performance of lead sulfide (PbS) quantum-dot-based up-conversion photodetectors is greatly limited owing to a large potential barrier at the interconnection layer between the photodetecting (PD) unit and light-emitting (LED) unit. Thus, very high driving voltage is required, rendering high energy consumption and poor working stability. By introducing azetidinium iodide (AzI) at the PD/LED interface, zero-barrier interconnection was achieved for the PbS-based infrared up-conversion photodetectors. The turn-on voltage under infrared illumination was greatly reduced to 1.2 V and a high photon-to-photon conversion efficiency (ηpp) of ∼3% was obtained at 3 V, showing a 10-fold enhancement compared to those previously reported devices. The mechanism for the regulation of interface energy level alignments was related to the self-assembly of the AzI dipole molecules, resulting from the van der Waals force between the S atoms in the ligands of PbS and the protonated H atoms around N atoms in AzI.

The Narrow Synthetic Window for Highly Homogenous InP Quantum Dots toward Narrow Red Emission.

Low-toxicity InP-based quantum dots (QDs) exhibit potential for replacing Cd/Pb-containing QDs in the visible and near-infrared regions. Despite advancements, further improvement relies on synthesizing homogeneous InP QDs to achieve a high color purity. In a commonly employed two-step "seed-mediated" synthetic approach, we demonstrate the high sensitivity of InP seed sizes and size distribution to the quantities of trioctylphosphine (TOP) and tris(trimethylsilyl)phosphine [(TMS)3P], attributed to the process of "self-focusing of size distribution" and enhanced reactivity of In-oleate through coordination with TOP. During growth, the processes of size focusing and defocusing are modulated by the accumulation of oleic acid and TOP molecules, as well as the amount of (TMS)3P in the growth precursor, which may relate to the dissolution process of InP magic size clusters. Through precise control, the best valley/depth ratio of InP QDs was 0.52 at the first absorption peak at 571 nm, resulting in luminescence with a full width at half-maximum of 35 at 620 nm with an absolute photoluminescence quantum yield around 90% after heteroepitaxial growth with ZnSe and ZnS shells.

Understanding the Growth Mechanism of HgTe Colloidal Quantum Dots through Bilateral Injection.

As potential low-cost alternatives of traditional bulk HgCdTe crystals, HgTe colloidal quantum dots (CQDs) synthesized through reactions between HgCl2 and trioctylphosphine-telluride in hot oleylamine have shown promising performances in mid-wave infrared photodetectors. Tetrapodic or tetrahedral HgTe CQDs have been obtained by tuning the reaction conditions such as temperature, reaction time, concentrations, and ratios of the two precursors. However, the principles governing the growth dynamics and the mechanism behind the transitions between tetrapodic and tetrahedral HgTe CQDs have not been sufficiently understood. In this work, synthesis of HgTe CQDs through bilateral injection is introduced to study the growth mechanism. It suggests that tetrahedral HgTe CQDs usually result from the breaks of tetrapodic HgTe CQDs after their legs grow thick enough. The fundamental factor determining whether the growth makes their legs longer or thicker is the effective concentration of the Te precursor during the growth, rather than temperature, Hg-rich environment, or reactivity of precursors. A chemical model is proposed to illustrate the principles governing the growth dynamics, which provides valuable guidelines for tuning the material properties of HgTe CQDs according to the needs of applications.

Emerging Design and Characterization Guidelines for Polymer-Based Infrared Photodetectors.

Infrared photodetectors are essential to many applications, including surveillance, communications, process monitoring, and biological imaging. The short-wave infrared (SWIR) spectral region (λ = 1-3 µm) is particularly powerful for health monitoring and medical diagnostics because biological tissues show low absorbance and minimal SWIR autofluorescence, enabling greater penetration depth and improved resolution in comparison with visible light. However, current SWIR photodetection technologies are largely based on epitaxially grown inorganic semiconductors, which are costly, require complex processing, and impose cooling requirements incompatible with wearable electronics. Solution-processable semiconductors are being developed for infrared detectors to enable low-cost direct deposition and facilitate monolithic integration and resolution not achievable using current technologies. In particular, organic semiconductors offer numerous advantages, including large-area and conformal coverage, temperature insensitivity, and biocompatibility, for enabling ubiquitous SWIR optoelectronics. This Account introduces recent efforts to advance the spectral response of organic photodetectors into the SWIR. High-performance visible to near-infrared (NIR) organic photodetectors have been demonstrated by leveraging the wealth of knowledge from organic solar cell research in the past decade. On the other hand, organic semiconductors that absorb in the SWIR are just emerging, and only a few organic materials have been reported that exhibit photocurrent past 1 µm. In this Account, we survey novel SWIR molecules and polymers and discuss the main bottlenecks associated with charge recombination and trapping, which are more challenging to address in narrow-band-gap photodetectors in comparison with devices operating in the visible to NIR. As we call attention to discrepancies in the literature regarding performance metrics, we share our perspective on potential pitfalls that may lead to overestimated values, with particular attention to the detectivity (signal-to-noise ratio) and temporal characteristics, in order to ensure a fair comparison of device performance. As progress is made toward overcoming challenges associated with losses due to recombination and increasing noise at progressively narrower band gaps, the performance of organic SWIR photodetectors is steadily rising, with detectivity exceeding 1011 Jones, comparable to that of commercial germanium photodiodes. Organic SWIR photodetectors can be incorporated into wearable physiological monitors and SWIR spectroscopic imagers that enable compositional analysis. A wide range of potential applications include food and water quality monitoring, medical and biological studies, industrial process inspection, and environmental surveillance. There are exciting opportunities for low-cost organic SWIR technologies to be as widely deployable and affordable as today's ubiquitous cell phone cameras operating in the visible, which will serve as an empowering tool for users to discover information in the SWIR and inspire new use cases and applications.

Correction: Elaborating the interplay between the detecting unit and emitting unit in infrared quantum dot up-conversion photodetectors.

Correction for 'Elaborating the interplay between the detecting unit and emitting unit in infrared quantum dot up-conversion photodetectors' by Qiulei Xu et al., Nanoscale, 2023, 15, 8197-8203, https://doi.org/10.1039/D3NR01237A.

High-Radiance Shortwave Infrared Light-Emitting Diodes Based on Highly Stable PbS Colloidal Quantum Dots.

PbS quantum dot light-emitting diodes (QLEDs) emitting around 1550 nm promise important applications in optical communications. However, due to insufficient suppression of surface traps for large-size PbS quantum dots (QDs), their performance under large driving current density was not satisfactory. In this work, octanethiol surfactant was added into a PbS QD solution and adsorbed onto the dot surface. As a result, the surface traps and the continuous oxidation of the unprotected (100) facets in PbS QDs were greatly suppressed. Therefore, the PbS QDs with octanethiol doubled their photoluminescence efficiency and showed outstanding stability. The PbS-based QLEDs with benchmark device structure showed a breakthrough high radiance of 18.3 W sr-1 m-2 with >2000 mA/cm2 driving current density. The efficient passivation of surface traps with octanethiol surfactant and the suppressed coupling between excitons and surface states under large working current were the main reasons for achieving the breakthrough high radiance.

Elaborating the interplay between the detecting unit and emitting unit in infrared quantum dot up-conversion photodetectors.

The quantum dot up-conversion device combines an infrared photodetector (PD) and a visible quantum-dot light-emitting diode (QLED) to directly convert infrared targets to visible images. However, large efficiency loss is usually induced by the integration of the detecting unit and the emitting unit. One of the important reasons is the performances of the PD and QLED units restraining each other. We regulated the equilibrium between infrared absorption and visible emission by changing the thicknesses of infrared active layers in up-conversion devices. A good balance could be achieved between the absorption of 980 nm incident light and the out-coupling of the 634 nm emission when the active layer thickness is 140 nm, leading to the best performance of the up-conversion device. As more photogenerated carriers are produced with the increase of infrared illumination intensity, the external quantum efficiency (EQE) of the QLED unit in the up-conversion device remains little changed. This suggests the limited amount of photogenerated holes in the PD unit does not limit the EQE of the QLED unit. However, a PD unit with a high ratio of photogenerated holes trapped near the interconnection decreased the EQE in the QLED unit. This work provides new insights into the interplay between the PD and QLED units in up-conversion devices, which is crucial for their further improvements.

In Situ Growth Mechanism for High-Quality Hybrid Perovskite Single-Crystal Thin Films with High Area to Thickness Ratio: Looking for the Sweet Spot.

The development of in situ growth methods for the fabrication of high-quality perovskite single-crystal thin films (SCTFs) directly on hole-transport layers (HTLs) to boost the performance of optoelectronic devices is critically important. However, the fabrication of large-area high-quality SCTFs with thin thickness still remains a significant challenge due to the elusive growth mechanism of this process. In this work, the influence of three key factors on in situ growth of high-quality large-size MAPbBr3 SCTFs on HTLs is investigated. An optimal "sweet spot" is determined: low interface energy between the precursor solution and substrate, a slow heating rate, and a moderate precursor solution concentration. As a result, the as-obtained perovskite SCTFs with a thickness of 540 nm achieve a record area to thickness ratio of 1.94 × 104  mm, a record X-ray diffraction peak full width at half maximum of 0.017°, and an ultralong carrier lifetime of 1552 ns. These characteristics enable the as-obtained perovskite SCTFs to exhibit a record carrier mobility of 141 cm2 V-1 s-1 and good long-term structural stability over 360 days.

Dual effects of interleukin-18: inhibiting hepatitis B virus replication in HepG2.2.15 cells and promoting hepatoma cells metastasis.

Interleukin-18 (IL-18) has been reported to inhibit hepatitis B virus (HBV) replication in the liver of HBV transgenic mice; however, the molecular mechanism of its antiviral effect has not been fully understood. In the present study, it was shown that IL-18 and its receptors (IL-18R) were constitutively expressed in hepatoma cell lines HepG2 and HepG2.2.15 as well as normal liver cell line HL-7702. We demonstrated that IL-18 directly inhibited HBV replication in HepG2.2.15 cells via downregulating the activities of HBV core and X gene promoters. The suppressed HBV replication by IL-18 could be rescued by the administration of BAY11-7082, an inhibitor of transcription factor NF-κB. On the other hand, it was of interest that IL-18 promoted HepG2 cell metastasis and migration dose dependently in both wound-healing assays and Transwell assays. The underlying mechanism could be partially attributable to the increased activities of extracellular matrix metalloproteinase (MMP)-9, MMP-3, and MMP-2 by IL-18, which upregulated the mRNA levels of MMP-3 and MMP-9 in a NF-κB-dependent manner. Furthermore, it was confirmed that expression of IL-18/IL-18R and most MMPs were remarkably upregulated in hepatocellular carcinoma (HCC) liver cancer tissue specimens, suggesting that IL-18/IL-18R-triggered signaling pathway was closely related to HCC metastasis in vivo. Therefore, we revealed the dual effects of IL-18 in human hepatocytes: it not only inhibited HBV replication but also promoted hepatoma cells metastasis and migration. NF-κB played a critical role in both effects. Our work contributed to a deeper understanding of the biological function of IL-18 in human hepatocytes.

Origin and Distribution of Large Asphaltite in South China.

Large quantities of Triassic solid asphaltite were discovered in the Guangyuan area, northwest Sichuan. The asphaltite is formed in layers with a vertical thickness between 0.3 and 2.8 m and is stably distributed with intrusive contact with surrounding rocks. This study aims on the genesis and distribution of asphaltite through trace element, biomarker, and Re-Os isotope analyses. Trace element analysis shows the enrichment of V and Cr in the asphaltite, indicating that it is derived from relatively deep hydrocarbon sources. The carbon isotope and biomarker results suggest that the asphaltite originates from Cambrian paleo reservoir. The Re-Os isotope analysis determines a formation age of 220 ± 6 Ma, which corresponds to the late Triassic, indicating the cracking of paleo reservoirs in late Triassic. Therefore, the origin of asphaltite is epigenetic-reservoir asphaltite. The generation of oil from Cambrian source rocks began at the end of Silurian and ended after Caledonian orogeny. At the end of Permian, the fracture system was well developed due to the influence of the Hercynian movement, which provided favorable conditions for the migration of Cambrian oil. By the end of Triassic, hydrocarbons generated from Cambrian source rocks were mainly distributed in fractures and reservoirs, thus forming paleo oil reservoirs. Afterward, the paleo reservoirs were adjusted to the surface or near the surface during the Indosinian movement and thus have cracked into asphaltite. The distribution of asphaltite is closely related to the tectonic activities, and the asphaltite is preferentially stored in the anticline axes, fissures, and some interlayer fracture zones.

Hepatitis C virus NS2/3 protease regulates HCV IRES-dependent translation and NS5B RdRp activity.

Chronic hepatitis C virus (HCV) infection often leads to liver cancer. NS2/3 protease is the first of two virally encoded proteases required for HCV polyprotein processing. In this report, we investigated the function of NS2/3 protease on HCV replication and translation. Cells transfected with plasmids encoding wild-type or mutant NS2/3 and a dual-luciferase reporter construct containing an HCV internal ribosome entry site (IRES) were used to examine the effect of NS2/3 protease on translation of HCV RNA. Cells transfected with plasmids encoding wild-type or mutant NS2/3, pcDNA-NS5B and a reporter plasmid were used to examine the effect of NS2/3 protease on HCV replication. The results showed that both autocleavage processing and the uncleaved form of NS2/3 protease specifically decrease HCV IRES-directed translation, while the uncleaved form of NS2/3 protease decreases HCV NS5B RdRp activity (replication), indicating that autoregulation by NS2/3 protease of HCV replication and translation may play an important role in persistent HCV infection.

Solution-Processed Phototransistors Combining Organic Absorber and Charge Transporting Oxide for Visible to Infrared Light Detection.

This report demonstrates high-performance infrared phototransistors that use a broad-band absorbing organic bulk heterojunction (BHJ) layer responsive from the visible to the shortwave infrared, from 500 to 1400 nm. The device structure is based on a bilayer transistor channel that decouples charge photogeneration and transport, enabling independent optimization of each process. The organic BHJ layer is improved by incorporating camphor, a highly polarizable additive that increases carrier lifetime. An indium zinc oxide transport layer with high electron mobility is employed for rapid charge transport. As a result, the phototransistors achieve a dynamic range of 127 dB and reach a specific detectivity of 5 × 1012 Jones under a low power illumination of 20 nW/cm2, outperforming commercial germanium photodiodes in the spectral range below 1300 nm. The photodetector metrics are measured with respect to the applied voltage, incident light power, and temporal bandwidth, demonstrating operation at a video-frame rate of 50 Hz. In particular, the frequency and light dependence of the phototransistor characteristics are analyzed to understand the change in photoconductive gain under different working conditions.

TNFAIP8 promotes cisplatin resistance in cervical carcinoma cells by inhibiting cellular apoptosis.

Cervical cancer is the second most prevalent malignant tumor in women worldwide. Failure of successful treatment is most prevalent in patients with the metastatic disease and the chemotherapy refractory disease. Tumor necrosis factor α-induced protein 8 (TNFAIP8) serves as an anti-apoptotic and pro-oncogenic protein, and is associated with cancer progression and poor prognosis in a number of different cancer types. However, the physiological and pathophysiological roles of TNFAIP8 in cervical carcinogenesis and development remain poorly understood. In the present study, it was demonstrated that TNFAIP8 protein expression levels were significantly increased in cervical cancer tissues compared with the non-tumor adjacent tissues using immunohistochemistry. Additionally, it was demonstrated that TNFAIP8 overexpression is associated with cisplatin resistance. Furthermore, depletion of TNFAIP8 impaired HeLa cell proliferation and viability in vitro, improved cisplatin sensitivity, and promoted cisplatin-induced cellular apoptosis and death. Subsequent mechanistic analysis demonstrated that TNFAIP8 silencing promoted caspase-8/-3 activation and p38 phosphorylation in HeLa cells treated with cisplatin, whereas apoptosis regulator B-cell lymphoma-2 expression was inhibited with TNFAIP8-silenced HeLa cells following treatment with cisplatin. These data suggested that TNFAIP8 serves as an anti-apoptotic protein against cisplatin-induced cell death, which eventually leads to chemotherapeutic drug-treatment failure. Therefore, the present data suggested that TNFAIP8 may be a promising therapeutic target for the treatment of cervical cancer.

The nucleocapsid protein of SARS-associated coronavirus inhibits B23 phosphorylation.

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) is responsible for SARS infection. Nucleocapsid (N) protein of SARS-CoV encapsidates the viral RNA and plays an important role in virus particle assembly and release. In this study, the N protein of SARS-CoV was found to associate with B23, a phosphoprotein in nucleolus, in vitro and in vivo. Mapping studies localized the critical N sequences for this interaction to amino acid residues 175-210, which included a serine/arginine (SR)-rich domain. In vitro phosphorylation assay showed that the N protein inhibited the B23 phosphorylation at Thr199.

Hepatitis C virus (HCV) NS2 protein up-regulates HCV IRES-dependent translation and down-regulates NS5B RdRp activity.

Chronic hepatitis C virus (HCV) infection often leads to liver cancer. The HCV NS2 protein is a hydrophobic transmembrane protein that associates with several cellular proteins in mammalian cells. In this report, we investigated the function of NS2 protein on HCV replication and translation by using a transient cell-based expression system. Cells co-transfected with pcDNA3.1 (-)-NS2 and the dual-luciferase reporter construct containing the HCV IRES were used to detect the effect of NS2 protein on HCV translation. Cells co-transfected with pcDNA3.1(-)-NS2, pcDNA-NS5B and a reporter plasmid were used to detect the effect of NS2 protein on HCV replication. The results showed that HCV NS2 protein up-regulated HCV IRES-dependent translation in a specific and dose-dependent manner in Huh7 cells but not in HeLa and HepG2 cells, and NS2 protein inhibited NS5B RdRp activity in a dose-independent manner in all three cell lines. These findings may suggest a novel mechanism by which HCV modulates its NS5B replication and IRES-dependent translation and facilitates virus persistence.

[The synthetic typing and its clinical application in atlantoaxial dislocation].

OBJECTIVE: To evaluate the synthetic typing and the treatment strategy for atlantoaxial dislocation. METHODS: The synthetic typing of atlantoaxial dislocation was worked out on the base of pathogenesis typing, Fielding imaging typing, and clinical typing, named PIR typing system (Pathogenesis, Imaging, and Reduction). Ninety-three patients with atlantoaxial dislocation were treated according to this typing system. RESULTS: Nine cases of type-II dens fracture were treated with hollow screw fixation. Bone union was accomplished at the follow-up of three months in all the patients, only with slight limitation of cervical motion. Un-retrieved Fielding I -degree dislocation was found in one case. Among the thirty-four patients treated with trans-oropharyngeal atlantoaxial reduction plate system (TARP), 32 obtained complete atlantoaxial reduction and fusion three months after operation. Atlantoaxial dislocation recurred in the other two cases because of screw loosening and the problem was solved through revision operations. Four patients in non-reducible type underwent anterior and/or posterior decompression. T heir neurological improved after operation but their atlantoaxial joints remained dislocated, and one case complicated with intracranial infection. CONCLUSIONS: Via the synthetic PIR typing system, atlantoaxial dislocation can be better classified according to its pathogenesis, imaging manifestation and mechanic stability. This system can also be served as a guide for clinical treatment. Anterior TARP operation and posterior atlantoaxial trans-pedicle screw-rod fixation are the main methods for the treatment of atlantoaxial dislocation.

Hepatitis B virus X protein (HBx) activates ATF6 and IRE1-XBP1 pathways of unfolded protein response.

Numerous viruses including hepatitis B virus (HBV) induce endoplasmic reticulum (ER) stress, which interrupts protein folding causing accumulation of unfolded or misfolded proteins in ER. To alleviate the stress placed on ER, these proteins must be refolded or degraded by activating a specific cellular response known as ER stress response or unfolded protein response (UPR). Two UPR-specific signaling pathways involving transmembrane proteins ATF6 and XBP1 generate critical transcription factors that activate UPR-responsive genes. In this study, the role of the multifunctional regulatory protein of HBV (HBx protein) in activation of UPR was investigated. In Hep3B cells with transit or stable expression of HBx, XBP1 expression and ATF6 cleavage was observed, suggesting that the ATF6 and IRE1-XBP1 pathways were activated. Furthermore, these two pathways were also activated in HepG2.2.15 cells that constitutively replicate the intact HBV genome, and blocked at least partly by cotransfection with small interfering RNA (siRNA) expression plasmid that knocked down HBx expression. Our results clearly establish HBx as an inducer of UPR and the activator of the ATF6 and IRE1-XBP1 pathways of UPR. HBx-mediated activation of these pathways of UPR probably promote HBV replication and expression in liver cells, and contribute to liver pathogenesis, perhaps even to hepatocellular carcinoma (HCC) development.

Up-regulation of IL-6 and TNF-alpha induced by SARS-coronavirus spike protein in murine macrophages via NF-kappaB pathway.

The clinical picture of severe acute respiratory syndrome (SARS) is characterized by an over-exuberant immune response with lung lymphomononuclear cells infilteration and proliferation that may account for tissue damage more than the direct effect of viral replication. To understand how cells response in the early stage of virus-host cell interaction, in this study, a purified recombinant S protein was studied for stimulating murine macrophages (RAW264.7) to produce proinflammatory cytokines (IL-6 and TNF-alpha) and chemokine IL-8. We found that direct induction of IL-6 and TNF-alpha release in the supernatant in a dose-, time-dependent manner and highly spike protein-specific, but no induction of IL-8 was detected. Further experiments showed that IL-6 and TNF-alpha production were dependent on NF-kappaB, which was activated through I-kappaBalpha degradation. These results suggest that SARS-CoV spike protein may play an important role in the pathogenesis of SARS, especially in inflammation and high fever.

Temperature-Dependent Detectivity of Near-Infrared Organic Bulk Heterojunction Photodiodes.

Bulk heterojunction photodiodes are fabricated using a new donor-acceptor polymer with a near-infrared absorption edge at 1.2 µm, achieving a detectivity up to 1012 Jones at a wavelength of 1 µm and an excellent linear dynamic range of 86 dB. The photodiode detectivity is maximized by operating at zero bias to suppress dark current, while a thin 175 nm active layer is used to facilitate charge collection without reverse bias. Analysis of the temperature dependence of the dark current and spectral response demonstrates a 2.8-fold increase in detectivity as the temperature was lowered from 44 to -12 °C, a relatively small change when compared to that of inorganic-based devices. The near-infrared photodiode shows a switching speed reaching up to 120 µs without an external bias. An application using our NIR photodiode to detect arterial pulses of a fingertip is demonstrated.

Origin of Efficient Inverted Nonfullerene Organic Solar Cells: Enhancement of Charge Extraction and Suppression of Bimolecular Recombination Enabled by Augmented Internal Electric Field.

We report our effort to unravel the origin of efficient operation of nonfullerene organic solar cells (OSCs), based on a poly[4,8-bis(5-(2-ethylhexyl) thiophen-2-yl)benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)](PTB7-Th):3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno [1,2-b:5,6-b']dithiophene (ITIC) blend system. The effects of buildup of space charges, charge extraction, and bimolecular recombination processes on the performance and the stability of PTB7-Th:ITIC-based regular and reverse configuration OSCs are analyzed. It is found that the high-performing inverted PTB7-Th:ITIC OSCs benefit from the combined effects of (1) suppression of bimolecular recombination enabled by an augmented effective internal electric field and (2) improvement of charge extraction by avoiding the holes passing through ITIC-rich region, which would otherwise occur in a regular configuration cell. The inverted PTB7-Th:ITIC OSCs possess a significant improvement in the cell stability and a high power conversion efficiency of ∼8.0%, which is >29% higher than that of an optimized regular configuration control cell (6.1%).