Tuning Redox Behavior of Sulfur Cathodes Via Ternary-Coordinated Single Fe Atom in Lithium-Sulfur Batteries.

Modulating the coordination configuration of single Fe atom has been an efficient strategy to strengthen the redox dynamics for lithium-sulfur batteries (LSBs) but remains challenging. Herein, the single Fe atom is functioned with nitrogen and carbon atoms in the first shell, and simultaneously, oxidized sulfur (─SOx) in the second shell, which presents a lower antibonding state and well address the redox activity of sulfur cathodes. In the ternary-coordinated single Fe atom catalyst (FeN2C2-SOx-NC), the binary structure of FeN2C2 provides a lower Fe-S bonding strength and d-p orbital hybridization, which obviously optimizes the adsorption and desorption behavior of sulfur species during the reduction and oxidation reaction processes. Simultaneously, the ─SOx redistributes the electron density of the coordinating nitrogen atoms, which possesses high electron-withdrawing ability and develops electrocatalytic activity. As a result, the sulfur cathodes with FeN2C2-SOx-NC present an excellent high-rate cyclic performance, accompanied by a capacity decay rate of 0.08% per cycle for 500 cycles at 4.0 C. This study provides new insights for optimizing the redox dynamics of sulfur cathodes in LSBs at the atomic level.

Addressing adsorption and catalysis of lithium polysulfide via electronic distribution of molybdenum carbide host.

Heterostructure engineering is considered a crucial strategy to modulate the intrinsic charge transfer behavior of materials, enhance catalytic activity, and optimize sulfur electrochemical processes. However, parsing the role of heterogeneous interface-structure-property relationships in heterostructures is still a key scientific issue to realize the efficient catalytic conversion of polysulfides. Based on this, molybdenum carbide (Mo2C) was successfully partial reduced to molybdenum metal (Mo) via a thermal reduction at high-temperature and the typical Mo-Mo2C-based Mott-Schottky heterostructures were simultaneously constructed, which realized the modulation of the electronic structure of Mo2C and optimized the conversion process of lithium polysulfides (LPS). Compared with single molybdenum carbide, the modulated molybdenum carbide acts as an electron donor with stronger Mo-S bonding strength as well as higher polysulfide adsorption energy, faster Li2S conversion kinetics, and greatly facilitates the adsorption → catalysis process of LPS. As a result, yolk-shell Mo-Mo2C heterostructure (C@Mo-Mo2C) exhibits excellent cycling performance as a sulfur host, with a discharge specific capacity of 488.41 mAh g-1 for C@Mo-Mo2C/S at 4 C and present an excellent high-rate cyclic performance accompanied by capacity decay rate of 0.08 % per cycle after 400 cycles at 2 C. Heterostructure-acting Mo2C electron distribution modulation engineering may contributes to the understanding of the structure-interface-property interaction law in heterostructures and further enables the efficient modulation of the chemical behavior of sulfur.

Clean and efficient synthesis of isoxazole derivatives in aqueous media.

A series of 5-arylisoxazole derivatives were synthesized via the reaction of 3-(dimethyl-amino)-1-arylprop-2-en-1-ones with hydroxylamine hydrochloride in aqueous media without using any catalyst. This method has the advantages of easier work-up, mild reaction conditions, high yields, and an environmentally benign procedure.

Enriching Oxygen Vacancy Defects via Ag-O-Mn Bonds for Enhanced Diffusion Kinetics of δ-MnO2 in Zinc-Ion Batteries.

Aqueous zinc-ion batteries (ZIBs) have received great attention due to their environmental friendliness and high safety. However, cathode materials with slow diffusion dynamics and dissolution in aqueous electrolytes hindered their further application. To address these issues, in this work, a MnO2-2 cathode doped with 1.12 wt % Ag was prepared, and after 1000 cycles of charge/discharge at 1 A·g-1, the capacity remained at 114 mA·h·g-1 (only 57.7 mA·h·g-1 for pristine MnO2). Cyclic voltammetry (CV), the galvanostatic intermittent titration technique (GITT), the electrochemical quartz crystal microbalance (EQCM) method, and density functional theory (DFT) calculation on pristine δ-MnO2 and MnO2-2 also proved the superior performance of MnO2-2. More investigation disclosed that its superior performance is attributed to the improved diffusion kinetics of the cathode brought by the enriched oxygen vacancy defects due to the formation of Ag-O-Mn bonds. Meanwhile, the kinetic mechanism of the Zn/MnO2-2 cell can be described as a reversible process of the dissolution/precipitation of the ZHS phase and consequent insertion/extraction of Zn2+ and H3O+. Herein, the primary issues of ZIB cathode materials have been addressed and solved to a certain extent. More importantly, such a modification in the design of the advanced manganese-based aqueous ZIB cathode materials can provide further insight and facilitate the development and application of this large-scale energy storage system in the near future.

A New Co-Free Ni-Rich LiNi0.8Fe0.1Mn0.1O2 Cathode for Low-Cost Li-Ion Batteries.

In recent years, with the rapid development of electric vehicles, the ever-fluctuating cobalt price has become a decisive constraint on the supply chain of the lithium-ion (Li-ion) battery industry. To address these challenges, a new and unreported cobalt-free (Co-free) material with a general formula of LiNi0.8Fe0.1Mn0.1O2 (NFM) is introduced. This Co-free material is synthesized via the coprecipitation method and examined by using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) to investigate the morphological, crystal-structure, and electrochemical properties. The NFM cathode can deliver a specific capacity of 202.6 mA h g-1 (0.1C, 3.0-4.5 V), a specific energy capacity of 798.8 W h kg-1 in material level (0.1C, 3.0-4.5 V), a reasonable rate capability, and a stable cycling performance (81.1% discharge capacity retention after 150 cycles at 10C, 3.0-4.3 V). Although the research on this subject is still in its early stage, the capability of this novel cathode material as a practical candidate for applications in next-generation Co-free lithium-ion batteries (LIBs) is highlighted in this study.

Thermal Stability and Ablation Behavior of Modified Polydimethylsiloxane-Based Polyurethane Composites Reinforced with Polyhedral Oligomeric Silsesquioxane.

Series of polydimethylsiloxane (PDMS)-based polyurethane (PU)/polyhedral oligomeric silsesquioxane (POSS) composites are prepared using ether or polyether modified diol/polyol PDMS prepolymers, isophorone diisocyanate (IPDI) and either non-reactive or reactive POSS. The effect of POSS incorporated chemically or physically, number of ethylene oxide units and crosslinking on PDMS based PU is investigated in terms of thermal stability and ablation properties. The ablation property is measured using an oxyacetylene torch test, and the ablation rate is evaluated. The results show that POSS molecules make a considerable influence on the ablative resistance, because they act as protective silica forming precursors under oxyacetylene condition. POSS molecules, especially methyl POSS, in PU matrix leads to the formation of densely accumulated spherical silica layers on the top of the ablated surface, resulting in improved ablation resistance.