Proteomic and Metabolomic Characterization of COVID-19 Patient Sera.

Early detection and effective treatment of severe COVID-19 patients remain major challenges. Here, we performed proteomic and metabolomic profiling of sera from 46 COVID-19 and 53 control individuals. We then trained a machine learning model using proteomic and metabolomic measurements from a training cohort of 18 non-severe and 13 severe patients. The model was validated using 10 independent patients, 7 of which were correctly classified. Targeted proteomics and metabolomics assays were employed to further validate this molecular classifier in a second test cohort of 19 COVID-19 patients, leading to 16 correct assignments. We identified molecular changes in the sera of COVID-19 patients compared to other groups implicating dysregulation of macrophage, platelet degranulation, complement system pathways, and massive metabolic suppression. This study revealed characteristic protein and metabolite changes in the sera of severe COVID-19 patients, which might be used in selection of potential blood biomarkers for severity evaluation.

Organelle-dependent polyprotein designs enable stoichiometric expression of nitrogen fixation components targeted to mitochondria.

Introducing nitrogen fixation (nif  ) genes into eukaryotic genomes and targeting Nif components to mitochondria or chloroplasts is a promising strategy for engineering nitrogen-fixing plants. A prerequisite for achieving nitrogen fixation in crops is stable and stoichiometric expression of each component in organelles. Previously, we designed a polyprotein-based nitrogenase system depending on Tobacco Etch Virus protease (TEVp) to release functional Nif components from five polyproteins. Although this system satisfies the demand for specific expression ratios of Nif components in Escherichia coli, we encountered issues with TEVp cleavage of polyproteins targeted to yeast mitochondria. To overcome this obstacle, a version of the Nif polyprotein system was constructed by replacing TEVp cleavage sites with minimal peptide sequences, identified by knowledge-based engineering, that are susceptible to cleavage by the endogenous mitochondrial-processing peptidase. This replacement not only further reduces the number of genes required, but also prevents potential precleavage of polyproteins outside the target organelle. This version of the polyprotein-based nitrogenase system achieved levels of nitrogenase activity in E. coli, comparable to those observed with the TEVp-based polyprotein nitrogenase system. When applied to yeast mitochondria, stable and balanced expression of Nif components was realized. This strategy has potential advantages, not only for transferring nitrogen fixation to eukaryotic cells, but also for the engineering of other metabolic pathways that require mitochondrial compartmentalization.

Chimeric mutations in grapevine ENHANCED DISEASE RESISTANCE1 improve resistance to powdery mildew without growth penalty.

Grapevine (Vitis vinifera L.) incurs severe quality degradation and yield loss from powdery mildew, a major fungal disease caused by Erysiphe necator. ENHANCED DISEASE RESISTANCE1 (EDR1), a Raf-like mitogen-activated protein kinase kinase kinase, negatively regulates defense responses against powdery mildew in Arabidopsis (Arabidopsis thaliana). However, little is known about the role of the putatively orthologous EDR1 gene in grapevine. In this study, we obtained grapevine VviEDR1-edited lines using CRISPR/Cas9. Plantlets containing homozygous and bi-allelic indels in VviEDR1 developed leaf lesions shortly after transplanting into the soil and died at the seedling stage. Transgenic plants expressing wild-type VviEDR1 and mutant Vviedr1 alleles as chimera (designated as VviEDR1-chi) developed normally and displayed enhanced resistance to powdery mildew. Interestingly, VviEDR1-chi plants maintained a spatiotemporally distinctive pattern of VviEDR1 mutagenesis: while almost no mutations were detected from terminal buds, ensuring normal function of the apical meristem, mutations occurred in young leaves and increased as leaves matured, resulting in resistance to powdery mildew. Further analysis showed that the resistance observed in VviEDR1-chi plants was associated with callose deposition, increased production of salicylic acid and ethylene, H2O2 production and accumulation, and host cell death. Surprisingly, no growth penalty was observed with VviEDR1-chi plants. Hence, this study demonstrated a role of VviEDR1 in the negative regulation of resistance to powdery mildew in grapevine and provided an avenue for engineering powdery mildew resistance in grapevine.

Cell-specific IL-1R1 regulates the regional heterogeneity of microglial displacement of GABAergic synapses and motor learning ability.

Microglia regulate synaptic function in various ways, including the microglial displacement of the surrounding GABAergic synapses, which provides important neuroprotection from certain diseases. However, the physiological role and underlying mechanisms of microglial synaptic displacement remain unclear. In this study, we observed that microglia exhibited heterogeneity during the displacement of GABAergic synapses surrounding neuronal soma in different cortical regions under physiological conditions. Through three-dimensional reconstruction, in vitro co-culture, two-photon calcium imaging, and local field potentials recording, we found that IL-1ß negatively modulated microglial synaptic displacement to coordinate regional heterogeneity in the motor cortex, which impacted the homeostasis of the neural network and improved motor learning ability. We used the Cre-Loxp system and found that IL-1R1 on glutamatergic neurons, rather than that on microglia or GABAergic neurons, mediated the negative effect of IL-1ß on synaptic displacement. This study demonstrates that IL-1ß is critical for the regional heterogeneity of synaptic displacement by coordinating different actions of neurons and microglia via IL-1R1, which impacts both neural network homeostasis and motor learning ability. It provides a theoretical basis for elucidating the physiological role and mechanism of microglial displacement of GABAergic synapses.

Multiparameter Mechanical Phenotyping for Accurate Cell Identification Using High-Throughput Microfluidic Deformability Cytometry.

Mechanical phenotyping has been widely employed for single-cell analysis over recent years. However, most previous works on characterizing the cellular mechanical properties measured only a single parameter from one image. In this paper, the quasi-real-time multiparameter analysis of cell mechanical properties was realized using high-throughput adjustable deformability cytometry. We first extracted 12 deformability parameters from the cell contours. Then, the machine learning for cell identification was performed to preliminarily verify the rationality of multiparameter mechanical phenotyping. The experiments on characterizing cells after cytoskeletal modification verified that multiple parameters extracted from the cell contours contributed to an identification accuracy of over 80%. Through continuous frame analysis of the cell deformation process, we found that temporal variation and an average level of parameters were correlated with cell type. To achieve quasi-real-time and high-precision multiplex-type cell detection, we constructed a back propagation (BP) neural network model to complete the fast identification of four cell lines. The multiparameter detection method based on time series achieved cell detection with an accuracy of over 90%. To solve the challenges of cell rarity and data lacking for clinical samples, based on the developed BP neural network model, the transfer learning method was used for the identification of three different clinical samples, and finally, a high identification accuracy of approximately 95% was achieved.

Inertial Multi-Force Deformability Cytometry for High-Throughput, High-Accuracy, and High-Applicability Tumor Cell Mechanotyping.

Previous on-chip technologies for characterizing the cellular mechanical properties often suffer from a low throughput and limited sensitivity. Herein, an inertial multi-force deformability cytometry (IMFDC) is developed for high-throughput, high-accuracy, and high-applicability tumor cell mechanotyping. Three different deformations, including shear deformations and stretch deformations under different forces, are integrated with the IMFDC. The 3D inertial focusing of cells enables the cells to deform by an identical fluid flow, and 10 parameters, such as cell area, perimeter, deformability, roundness, and rectangle deformability, are obtained in three deformations. The IMFDC is able to evaluate the deformability of different cells that are sensitive to different forces on a single chip, demonstrating the high applicability of the IMFDC in analyzing different cell lines. In identifying cell types, the three deformations exhibit different mechanical responses to cells with different sizes and deformability. A discrimination accuracy of ≈93% for both MDA-MB-231 and MCF-10A cells and a throughput of ≈500 cells s-1 can be achieved using the multiple-parameters-based machine learning model. Finally, the mechanical properties of metastatic tumor cells in pleural and peritoneal effusions are characterized, enabling the practical application of the IMFDC in clinical cancer diagnosis.

Elasto-inertial particle focusing in sinusoidal microfluidic channels.

Dean flow existing in sinusoidal channels could enhance the throughput and efficiency for elasto-inertial particle focusing. However, the fundamental mechanisms of elasto-inertial focusing in sinusoidal channels are still unclear. This work employs four microfluidic devices with symmetric and asymmetric sinusoidal channels to explore the elasto-inertial focusing mechanisms over a wide range of flow rates. The effects of rheological property, flow rate, sinusoidal channel curvature, particle size, and asymmetric geometry on particle focusing performance are investigated. It is intriguing to find that the Dean flow makes a substantial contribution to the particle elasto-inertial focusing. The results illustrate that a better particle focusing performance and a faster focusing process are obtained in the sinusoidal channel with a small curvature radius due to stronger Dean flow. In addition, the particle focusing performance is also related to particle diameter and rheological properties, the larger particles show a better focusing performance than smaller particles, and the smaller flow rate is required for particles to achieve stable focusing at the outlet in the higher concentration of polyvinylpyrrolidone solutions. Our work offers an increased knowledge of the mechanisms of elasto-inertial focusing in sinusoidal channels. Ultimately, these results provide supportive guidelines into the design and development of sinusoidal elasto-inertial microfluidic devices for high-performance focusing.

Particle focusing mechanisms in λ-DNA solution flowing in a straight microchannel.

Most biological fluids (such as blood, saliva, and lymph) in nature have certain viscoelasticity and are beginning to be used as the carrying fluids for viscoelastic microfluidics. However, the particle-focusing mechanisms in these new biological viscoelastic fluids are still unclear. In this work, the particle-focusing mechanisms in λ-DNA solutions were systematically explored. We first explored the particle focusing dynamics in a square cross-section under varied flow rates to uncover the effects of flow rate on particle focusing. Three focusing stages, from the classic five-position viscoelastic focusing to single-stream focusing and finally to multiplex-stream focusing, were clearly demonstrated. In addition, the particle focusing process along the channel length was demonstrated, and a first-fast-and-then-slow focusing process was clearly observed. Then, the effects of λ-DNA concentrations on particle focusing were explored and compared using the solutions with 0-25 ppm λ-DNA. Finally, we discussed the inferences of blockage ratio on particle focusing by changing the particle diameter and cross-sectional dimensions. Our work may provide a deeper understanding on the particle focusing mechanisms in biological viscoelastic fluids and lays a foundation for the subsequent particle counting and analysis and the development of low-cost portable flow cytometers.

BNIP3L/NIX-mediated mitophagy alleviates passive stress-coping behaviors induced by tumor necrosis factor-α.

Recent studies based on animal models of various neurological disorders have indicated that mitophagy, a selective autophagy that eliminates damaged and superfluous mitochondria through autophagic degradation, may be involved in various neurological diseases. As an important mechanism of cellular stress response, much less is known about the role of mitophagy in stress-related mood disorders. Here, we found that tumor necrosis factor-α (TNF-α), an inflammation cytokine that plays a particular role in stress responses, impaired the mitophagy in the medial prefrontal cortex (mPFC) via triggering degradation of an outer mitochondrial membrane protein, NIP3-like protein X (NIX). The deficits in the NIX-mediated mitophagy by TNF-α led to the accumulation of damaged mitochondria, which triggered synaptic defects and behavioral abnormalities. Genetic ablation of NIX in the excitatory neurons of mPFC caused passive coping behaviors to stress, and overexpression of NIX in the mPFC improved TNF-α-induced synaptic and behavioral abnormalities. Notably, ketamine, a rapid on-set and long-lasting antidepressant, reversed the TNF-α-induced behavioral abnormalities through activation of NIX-mediated mitophagy. Furthermore, the downregulation of NIX level was also observed in the blood of major depressive disorder patients and the mPFC tissue of animal models. Infliximab, a clinically used TNF-α antagonist, alleviated both chronic stress- and inflammation-induced behavioral abnormalities via restoring NIX level. Taken together, these results suggest that NIX-mediated mitophagy links inflammation signaling to passive coping behaviors to stress, which underlies the pathophysiology of stress-related emotional disorders.

Safety, tolerability, pharmacokinetic, pharmacodynamic and immunogenicity profiles of Exendin-4-IgG4-Fc in healthy subjects: A phase 1, single-centre, randomized, double-blind, dose escalation study.

AIM: Novel long-acting drugs for type 2 diabetes mellitus may optimize patient compliance and glycaemic control. Exendin-4-IgG4-Fc (E4F4) is a long-acting glucagon-like peptide-1 receptor agonist. This first-in-human study investigated the safety, tolerability, pharmacokinetic, pharmacodynamic and immunogenicity profiles of a single subcutaneous injection of E4F4 in healthy subjects. METHODS: This single-centre, randomized, double-blind, placebo-controlled phase 1 clinical trial included 96 subjects in 10 sequential cohorts that were provided successively higher doses of E4F4 (0.45, 0.9, 1.8, 3.15, 4.5, 6.3, 8.1, 10.35, 12.6 and 14.85 mg) or placebo (ChinaDrugTrials.org.cn: ChiCTR2100049732). The primary endpoint was safety and tolerability of E4F4. Secondary endpoints were pharmacokinetic, pharmacodynamic and immunogenicity profiles of E4F4. Safety data to day 15 after the final subject in a cohort had been dosed were reviewed before commencing the next dose level. RESULTS: E4F4 was safe and well tolerated among healthy Chinese participants in this study. There was no obvious dose-dependent relationship between frequency, severity or causality of treatment-emergent adverse events. Cmax and area under the curve of E4F4 were dose proportional over the 0.45-14.85 mg dose range. Median Tmax and t1/2 ranged from 146 to 210 h and 199 to 252 h, respectively, across E4F4 doses, with no dose-dependent trends. For the intravenous glucose tolerance test, area under the curve of glucose in plasma from time 0 to 180 min showed a dose-response relationship in the 1.8-10.35 mg dose range, with an increased response at the higher doses. CONCLUSION: E4F4 exhibited an acceptable safety profile and linear pharmacokinetics in healthy subjects. The recommended phase 2 dose is 4.5-10.35 mg once every 2 weeks.

A pilot study of virtual liver segment projection technology in subsegment-oriented laparoscopic anatomical liver resection when indocyanine green staining fails (with video).

BACKGROUND: Precision surgery for liver tumors favors laparoscopic anatomical liver resection (LALR), involving the removal of specific liver segments or subsegments. Indocyanine green (ICG)-negative staining is a commonly used method for defining resection boundaries but may be prone to failure. The challenge arises when ICG staining fails, as it cannot be repeated during surgery. In this study, we employed the virtual liver segment projection (VLSP) technology as a salvage approach for precise boundary determination. Our aim was to assess the feasibility of the VLSP to be used for the determination of the boundaries of the liver resection in this situation. METHODS: Between January 2021 and June 2023, 12 consecutive patients undergoing subsegment-oriented LALR were included in this pilot series. The VLSP technology was utilized to define the resection boundaries at the time of ICG-negative staining failure. Routine surgical parameters and short-term outcomes were evaluated to assess the safety of VLSP in this procedure. In addition, its feasibility was assessed by analyzing the accuracy between the predicted resected liver volume (PRLV) and actual resected liver volume (ARLV). RESULTS: Of the 12 enrolled patients, the mean operation time was 444.58 ± 101.70 min (range 290-570 min), with a mean blood loss of 125.00 ± 96.53 ml (range 50-400 mL). One patient (8.3%) was converted to laparotomy for subsequent parenchymal transection, four (33.3%) received blood transfusions and four (33.3%) had postoperative complications. All patients received an R0 resection. The Pearson correlation coefficient (r) between PRLV and ARLV was 0.98 (R2 = 0.96, p < 0.05), and the relative error (RE) was 8.62 ± 6.66% in the 12 patients, indicating agreement. CONCLUSION: Failure of intraoperative ICG-negative staining during subsegment-oriented LALR is possible, and VLSP may be an alternative to define the resection boundaries in such cases.

Laparoscopic left hemihepatectomy using augmented reality navigation plus ICG fluorescence imaging for hepatolithiasis: a retrospective single-arm cohort study (with video).

BACKGROUND: Laparoscopic left hemihepatectomy (LLH) has been shown to be an effective and safe method for treating hepatolithiasis primarily affecting the left hemiliver. However, this procedure still presents challenges. Due to pathological changes in intrahepatic duct stones, safely dissecting the hilar vessels and determining precise resection boundaries remains difficult, even with fluorescent imaging. Our team proposed a new method of augmented reality navigation (ARN) combined with Indocyanine green (ICG) fluorescence imaging for LLH in hepatolithiasis cases. This study aimed to investigate the feasibility of this combined approach in the procedure. METHODS: Between May 2021 and September 2023, 16 patients with hepatolithiasis who underwent LLH were included. All patients underwent preoperative 3D evaluation and were then guided using ARN and ICG fluorescence imaging during the procedure. Perioperative and short-term postoperative outcomes were assessed to evaluate the safety and efficacy of the method. RESULTS: All 16 patients successfully underwent LLH. The mean operation time was 380.31 ± 92.17 min, with a mean estimated blood loss of 116.25 ± 64.49 ml. ARN successfully aided in guiding hilar vessel dissection in all patients. ICG fluorescence imaging successfully identified liver resection boundaries in 11 patients (68.8%). In the remaining 5 patients (31.3%) where fluorescence imaging failed, virtual liver segment projection (VLSP) successfully identified their resection boundaries. No major complications occurred in any patients. Immediate stone residual rate, stone recurrence rate, and stone extraction rate through the T-tube sinus tract were 12.5%, 6.3%, and 6.3%, respectively. CONCLUSION: The combination of ARN and ICG fluorescence imaging enhances the safety and precision of LLH for hepatolithiasis. Moreover, ARN may serve as a safe and effective tool for identifying precise resection boundaries in cases where ICG fluorescence imaging fails.

Efficacy of hepatectomy for hepatolithiasis using 3D visualization combined with ICG fluorescence imaging: A retrospective cohort study.

BACKGROUND: Hepatolithiasis is a complex condition that poses challenges and difficulties in surgical treatment. Three-dimensional visualization technology combined with fluorescence imaging (3DVT-FI) enables accurate preoperative assessment and real-time intraoperative navigation. However, the perioperative outcomes of 3DVT-FI in hepatolithiasis have not been reported. We aim to evaluate the efficacy of 3DVT-FI in the treatment of hepatolithiasis. METHODS: A retrospective analysis was performed on 128 patients who underwent hepatectomy for hepatolithiasis at the Department of Hepatobiliary Surgery, Zhujiang Hospital, between January 2017 and December 2022. Among them, 50 patients underwent hepatectomy using 3DVT-FI (3DVT-FI group), while 78 patients underwent conventional hepatectomy without 3DVT-FI (CH group). The operative data, postoperative liver function indices, complication rates and stone residue were compared between the two groups. RESULTS: There were no significant differences in preoperative baseline data between the two groups (p > 0.05). Compared with the CH group, the 3DVT-FI group exhibited lower intraoperative blood loss (140.00 ± 112.12 vs. 225.99 ± 186.50 mL, p = 0.001), and a lower intraoperative transfusion rate (8.0% vs. 23.1%, p = 0.027). The overall incidence of postoperative complications did not differ significantly (22.0% vs. 35.9%, p = 0.096). The 3DVT-FI group was associated with a lower immediate residual stone rate (16.0% vs. 34.6%, p = 0.021). There were no perioperative deaths in the 3DVT-FI group, while one perioperative death occurred in the CH group. CONCLUSIONS: The 3DVT-FI may offer significant benefits in terms of surgical safety, reduced intraoperative bleeding and decreased stone residue during hepatectomy for hepatolithiasis.

CircVMP1 promotes glycolysis and disease progression by upregulating HKDC1 in colorectal cancer.

BACKGROUND: Circular RNAs (circRNAs) have been reported to play important roles in cancers. Here, we characterized circVMP1 (hsa_circ_0006508), an important circRNA which promoted glycolysis and disease progression in colorectal cancer (CRC). In this study, we aimed to explore the mechanism by which circVMP1 regulated tumor glycolysis and its related pathways in promoting CRC cell proliferation and metastasis. METHODS: The expression level of circVMP1 in CRC tissues and adjacent normal tissues was detected using quantitative PCR. In vitro and in vivo functional experiments were used to evaluate the effects of circVMP1 in the regulation of CRC cell proliferation and migration. Mitochondrial stress tests and glycolysis stress tests were conducted to detect the effect of circVMP1 on oxidative phosphorylation and glycolysis. Dual-luciferase reporter and RNA immunoprecipitation assays were used to evaluate the interaction between circVMP1, miR-3167, and HKDC1. RESULTS: We demonstrated that the level of circVMP1 was significantly upregulated in CRC tissues compared with normal tissues. In HCT116 and SW480 cells, overexpression of circVMP1 promoted proliferation, metastasis, and glycolysis. In vivo analysis indicated that circVMP1 accelerated the proliferation of xenograft tumors. As for the mechanism, overexpression of circVMP1 increased the levels of hexokinase domain component 1 (HKDC1) through competitive binding with miR-3167. CONCLUSION: Our study reported that circVMP1 was one of the tumor driver genes that promoted CRC malignant progression and glycolysis by upregulating HKDC1. CircVMP1/miR-3167/HKDC1 was a signaling axis that might be a target for CRC therapy.

Heavy industrial aggregation area's green transformation optimisation pathways exploration with synergistic reduction pursue of CO2 and gaseous pollutants.

A profound green transformation of China's heavy industrial aggregation regions is required to conquer severe air pollution, and fulfill carbon peak pledge. Here, to clarify the coordinated mechanism and an optimal roadmap for the reduction of CO2 and gaseous pollutants, we integrated input-output modelling, system dynamics, and multi-objective programming to construct a CO2 and gaseous pollutants synergistic reduction model initially; investigated incentive approaches from 2020 to 2035; Hebei, with the largest steel production in China, was adopted as a demonstrative region. Results revealed that intensive dual control of efficiency and structure in energy and industry can accelerate achieving carbon peak in 2029. In optimal case, CO2 emission intensity can reach a 75.2% reduction compared to 2020, and gaseous pollutants continue decline simultaneously (SO2 and NOx can drop by 63% and 48%); and the synergistic reduction level is expected to improve. Thus, vigorously develop decoupling between economy-air pollution-carbon reduction in Hebei. As opposed to efficiency improvement, structural adjustments were demonstrated to be more effective than short-term efficiency improvements. In addition, the estimated development potential of traditional heavy industries such as steel and petrochemicals is limited, whereas the equipment manufacturing industry, closely linked to traditional industries, is expected to continue its development. Furthermore, although in the electrification process, coal consumption is still needed because of its indispensable role in the production process of heavy industries. The results can facilitate policy-making for heavy industrial aggregation areas' green transformation in shaping policies and actions with clear objectives, effective measures, and sound coordination.

Mixed crushing and competitive leaching of all electrode material components and metal collector fluid in the spent lithium battery.

Hydrometallurgy is a primary method for recovering cathode electrode materials from spent lithium-ion batteries (LIBs). Most of the current research materials are pure cathode electrode materials obtained through manual disassembly. However, the spent LIBs are typically broken as a whole during the actual industrial recycling which makes the electrode materials combined with the collector fluid. Therefore, the competitive leaching between metal collector fluid and electrode material was examined. The pyrolysis characteristics of the electrode materials were analyzed to determine the pyrolysis temperature. The electrode sheet was pyrolyzed and then crushed for competitive leaching. The effect of pyrolysis was analyzed by XPS. The competitive leaching behavior was studied based on leaching agent concentration, leaching time and leaching temperature. The composition and morphology of the residue were determined to prove the competitive leaching results by XRD-SEM. TG results showed that 500 °C was the suitable pyrolysis temperature. XPS analysis demonstrated that pyrolysis can completely remove PVDF. Li and Co were preferentially leached during the competitive leaching while the leaching rates were 90.10% and 93.40% with 50 min leaching at 70 °C. The Al and Cu had weak competitive leachability and the leaching rate was 29.10% and 0.00%. XRD-SEM analysis showed that Li and Co can be fully leached with residual Al and Cu remaining. The results showed that the mixed leaching of electrode materials is feasible based on its excellent selective leaching properties.

Viscoelastic-Sorting Integrated Deformability Cytometer for High-Throughput Sorting and High-Precision Mechanical Phenotyping of Tumor Cells.

The counts and phenotypes of circulating tumor cells (CTCs) in whole blood are useful for disease monitoring and prognostic assessment of cancer. However, phenotyping CTCs in the blood is difficult due to the presence of a large number of background blood cells, especially some blood cells with features similar to those of tumor cells. Herein, we presented a viscoelastic-sorting integrated deformability cytometer (VSDC) for high-throughput label-free sorting and high-precision mechanical phenotyping of tumor cells. A sorting chip for removing large background blood cells and a detection chip for detecting multiple cellular mechanical properties were integrated into our VSDC. Our VSDC has a sorting efficiency and a purity of over 95% and over 81% for tumor cells, respectively. Furthermore, multiple mechanical parameters were used to distinguish tumor cells from white blood cells using machine learning. An accuracy of over 97% for identifying tumor cells was successfully achieved with the highest identification accuracy of 99.4% for MCF-7 cells. It is envisioned that our VSDC will open up new avenues for high-throughput and label-free single-cell analysis in various biomedical applications.

Static droplet array for the synthesis of nonspherical microparticles.

We reported a manually operated static droplet array (SDA)-based device for the synthesis of nonspherical microparticles with different shapes. The improved SDA structure and reversible bonding between poly(dimethylsiloxane) (PDMS) were used in the device for the large-scale synthesis and rapid extraction of nonspherical microparticles. To understand the device physics, the effects of flow rate, SDA well size, and shape on droplet generation performances were explored. The results indicated that droplet generation in SDA structures was insensitive to the flow rate, and monodisperse droplets were generated by the SDA-based device through manually pushing the syringe. Finally, we integrated four kinds of SDA structures in one device and successfully realized the synthesis and extraction of nonspherical microparticles with different shapes and materials. Our SDA-based device offers numerous advantages, such as simple manual operation, low equipment cost, controllable microparticle shapes and sizes, and large-scale production. Thus, it holds the potential to be used as a flexible tool for the production of nonspherical microparticles.

Next-generation liquid biopsy instruments: Challenges and opportunities.

Conventional cancer diagnosis needs to excise diseased tissue from the patient's body for biopsy, causing severe injury to patients. Liquid biopsy (LB), with the superior advantage of minimal invasiveness, has shown its ability to cancer diagnosis in real-time and has been developing promising diagnostic instruments. However, until today, the developed instrument still cannot be an alternative to tissue biopsy in the majority of research and clinical settings. In this paper, we first summarize the challenges and limitations suffered by the existing LB instrument. Then, the opportunities and future progression of the next-generation instrument are discussed in detail. In all, we hope that the future LB instrument can be eventually integrated into the clinical workflow and serve as a validated and reliable tool for cancer diagnosis.

Droplet microfluidics for CTC-based liquid biopsy: a review.

Circulating tumor cells (CTCs) are important biomarkers of liquid biopsy. The number and heterogeneity of CTCs play an important role in cancer diagnosis and personalized medicine. However, owing to the low-abundance biomarkers of CTCs, conventional assays are only able to detect CTCs at the population level. Therefore, there is a pressing need for a highly sensitive method to analyze CTCs at the single-cell level. As an important branch of microfluidics, droplet microfluidics is a high-throughput and sensitive single-cell analysis platform for the quantitative detection and heterogeneity analysis of CTCs. In this review, we focus on the quantitative detection and heterogeneity analysis of CTCs using droplet microfluidics. Technologies that enable droplet microfluidics, particularly high-throughput droplet generation and high-efficiency droplet manipulation, are first discussed. Then, recent advances in detecting and analyzing CTCs using droplet microfluidics from the different aspects of nucleic acids, proteins, and metabolites are introduced. The purpose of this review is to provide guidance for the continued study of droplet microfluidics for CTC-based liquid biopsy.