Bioreaction-Compatible Bivariate Lanthanide MOF Sensor Enables Stimulus-Multiresponsive Platform for ctDNA On-Site Detection.

Detection of circulating tumor DNA (ctDNA) in liquid biopsy is of great importance for tumor diagnosis but difficult due to its low amount in bodily fluids. Herein, a novel ctDNA detection platform is established by quantifying DNA amplification by-product pyrophosphate (PPi) using a newly designed bivariable lanthanide metal-organic framework (Ln-MOF), namely, Ce/Eu-DPA MOF (CE-24, DPA = pyridine-2,6-dicarboxylic acid). CE-24 MOF exhibits ultrafast dual-response (fluorescence enhancement and enzyme-activity inhibition) to PPi stimuli by virtue of host-guest interaction. The platform is applied to detecting colon carcinoma-related ctDNA (KARS G12D mutation) combined with the isothermal nucleic acid exponential amplification reaction (EXPAR). ctDNA triggers the generation of a large amount of PPi, and the ctDNA quantification is achieved through the ratio fluorescence/colorimetric dual-mode assay of PPi. The combination of the EXPAR and the dual-mode PPi sensing allows the ctDNA assay method to be low-cost, convenient, bioreaction-compatible (freedom from the interference of bioreaction systems), sensitive (limit of detection down to 101 fM), and suitable for on-site detection. To the best of our knowledge, this work is the first application of Ln-MOF for ctDNA detection, and it provides a novel universal strategy for the rapid detection of nucleic acid biomarkers in point-of-care scenarios.

Bioinspired Heterocoordination in Adaptable Cobalt Metal-Organic Framework for DNA Epigenetic Modification Detection.

Metal-organic frameworks (MOFs) show unique advantages in simulating the dynamics and fidelity of natural coordination. Inspired by zinc finger protein, a second linker was introduced to affect the homogeneous MOF system and thus facilitate the emergence of diverse functionalities. Under the systematic identification of 12 MOF species (i.e., metal ions, linkers) and 6 second linkers (trigger), a dissipative system consisting of Co-BDC-NO2 and o-phenylenediamine (oPD) was screened out, which can rapidly and in situ generate a high photothermal complex (η = 36.9%). Meanwhile, both the carboxylation of epigenetic modifications and metal ion (Fe3+, Ni2+, Cu2+, Zn2+, Co2+ and Mn2+) screening were utilized to improve the local coordination environment so that the adaptable Co-MOF growth on the DNA strand was realized. Thus, epigenetic modification information on DNA was converted to an amplified metal ion signal, and then oPD was further introduced to generate bimodal dissipative signals by which a simple, high-sensitivity detection strategy of 5-hydroxymethylcytosine (LOD = 0.02%) and 5-formylcytosine (LOD = 0.025‰) was developed. The strategy provides one low-cost method (< 0.01 $/sample) for quantifying global epigenetic modifications, which greatly promotes epigenetic modification-based early disease diagnosis. This work also proposes a general heterocoordination design concept for molecular recognition and signal transduction, opening a new MOF-based sensing paradigm.

Enhancing Kinase Activity Detection with a Programmable Lanthanide Metal-Organic Framework via ATP-to-ADP Conversion.

Precise modulation of host-guest interactions between programmable Ln-MOFs (lanthanide metal-organic frameworks) and phosphate analytes holds immense promise for enabling novel functionalities in biosensing. However, the intricate relationship between these functionalities and structures remains largely elusive. Understanding this correlation is crucial for advancing the rational design of fluorescent biosensor technology. Presently, there exists a large research gap concerning the utilization of Ln-MOFsto monitor the conversion of ATP to ADP, which poses a limitation for kinase detection. In this work, we delve into the potential of Ln-MOFs to amplify the fluorescence response during the kinase-mediated ATP-to-ADP conversion. Six Eu-MOFs were synthesized and Eu-TPTC ([1,1':4',1″]-terphenyl-3,3'',5,5''-tetracarboxylic acid) was selected as a ratiometric fluorescent probe, which is most suitable for high-precision detection of creatine kinase activity through the differential response from ATP to ADP. The molecular -level mechanism was confirmed by density functional theory. Furthermore, a simple paper chip-based platform was constructed to realize the fast (20 min) and sensitive (limit of detection is 0.34 U/L) creatine kinase activity detection in biological samples. Ln-MOF-phosphate interactions offer promising avenues for kinase activity assays and hold the potential for precise customization of analytical chemistry.

Programmable Lanthanide Metal-Organic Framework for Ultra-Efficient Nucleic Acids Extraction and Interaction Analysis.

Efficient, mild, and reversible adsorption of nucleic acids onto nanomaterials represents a promising analytical approach for medical diagnosis. However, there is a scarcity of efficient and reversible nucleic acid adsorption nanomaterials. Additionally, the lack of comprehension of the molecular mechanisms governing their interactions poses significant challenges. These issues hinder the rational design and analytical applications of the nanomaterials. Herein, we propose an ultra-efficient nucleic acid affinity nanomaterial based on programmable lanthanide metal-organic frameworks (Ln-MOFs). Through experiments and density functional theory calculations, a rational design guideline for nucleic acid affinity of Ln-MOF was proposed, and a modular and flexible preparation scheme was provided. Then, Er-TPA (terephthalic acid) MOF emerged as the optimal candidate due to its pore size-independent adsorption and desorption capabilities for nucleic acids, enabling ultra-efficient adsorption (about 150% mass ratio) within 1 min. Furthermore, we elucidate the molecular-level mechanisms underlying the Ln-MOF adsorption of single- and double-stranded DNA and G4 structures. The affinity nanomaterial based on Ln-MOF exhibits robust nucleic acid extraction capability (4-fold higher than commercial reagent kits) and enables mild and reversible CRISPR/Cas9 functional regulation. This method holds significant promise for broad application in DNA/RNA liquid biopsy and gene editing, facilitating breakthroughs in analytical chemistry, pharmacy, and medical research.

Macrophage-Inspired Degradation-Activation System Enables Ultrasensitive Multicolor Detection of Haloacetic Acids via Janus Perovskite Halide Exchange.

Haloacetic acids (HAAs), as representative disinfection byproducts, have the potential hazards of teratogenesis, carcinogenesis, and mutagenesis. Herein, inspired by the scavenging physiology of macrophages and taking advantage of the unique properties of perovskites, we design a biomimetic integrated three-step workflow, named the macrophage-inspired degradation-activation system (MIDAS), for the detection of HAAs in aqueous samples. First, HAAs are "devoured" by methyl t-butyl ether (MTBE) from a sample. Then, ultraviolet C is utilized to induce the photolysis of MTBE and the dehalogenation of HAAs. Third, the photoinduced product, tertiary butyl haloalkane, can activate the vacancy defect-facilitated halide exchange of perovskites, generating multicolor fluorescent signals. The MIDAS realizes the rapid (<5 min), ultrasensitive (limit of detection: 30 and 15 ppb), and accurate (recovery: 95.2-109.4%) quantification of dichloroacetic acid and dibromoacetic acid in real water samples. Furthermore, a chemometrics-supported MIDAS portable platform is established for the visual semi-quantification of HAAs and the discrimination of binary mixed HAAs on site. The MIDAS-based strategy provides a highly efficient approach to trigger the perovskite halide exchange and shows the Midas touch-like ability in the fluorescent assay of HAAs in aqueous samples. To our knowledge, this is the first universal multicolor fluorimetry and the first application of perovskites for HAA detection.

In Situ Formation of o-Phenylenediamine Cascade Polymers Mediated by Metal-Organic Framework Nanozymes for Fluorescent and Photothermal Dual-Mode Assay of Acetylcholinesterase Activity.

A fluorescent and photothermal dual-mode assay method was established for the detection of acetylcholinesterase (AChE) activity based on in situ formation of o-phenylenediamine (oPD) cascade polymers. First, copper metal-organic frameworks of benzenetricarboxylic acid (Cu-BTC) were screened out as nanozymes with excellent oxidase-like activity and confinement catalysis effect. Then, an ingenious oPD cascade polymerization strategy was proposed. That is, oPD was oxidized by Cu-BTC to oPD oligomers with strong yellow fluorescence, and oPD oligomers were further catalyzed to generate J-aggregation, which promotes the formation of oPD polymer nanoparticles with a high photothermal effect. By utilizing thiocholine (enzymolysis product of acetylthiocholine) to inhibit the Cu-BTC catalytic effect, AChE activity was detected through the fluorescence-photothermal dual-signal change of oPD oligomers and polymer nanoparticles. Both assay modes have low detection limitation (0.03 U L-1 for fluorescence and 0.05 U L-1 for photothermal) and can accurately detect the AChE activity of human serum (recovery 85.0-111.3%). The detection results of real serum samples by fluorescent and photothermal dual modes are consistent with each other (relative error ≤ 5.2%). It is worth emphasizing that this is the first time to report the high photothermal effect of oPD polymers and the fluorescence-photothermal dual-mode assay of enzyme activity.

Multifunctional lanthanide metal-organic framework based ratiometric fluorescence visual detection platform for alkaline phosphatase activity.

A turn-on/off ratiometric fluorescence detection platform based on multifunctional lanthanide metal-organic framework (Ln-MOF) and an enzymatic cascade reaction is proposed for alkaline phosphatase (ALP) activity assay. L-phosphotyrosine is hydrolyzed to levodopa (L-dopa) by two steps of enzymatic reaction. L-dopa further reacts with naphthoresorcinol to produce carboxyazamonardine with strong emission at 490 nm. In this process, multifunctional Ln-MOF (Cu@Eu-BTC, BTC is the 1,3,5-benzenetricarboxylic acid) acts not only as a nanozyme to catalyze the fluorogenic reaction between L-dopa and naphthoresorcinol but also as a fluorescence internal standard. The emission of Cu@Eu-BTC at 620 nm is quenched by phosphate anions, and the dual-response ratiometric fluorescence (F490/F620) can be achieved. A good linear relationship was obtained between Δ(F490/F620) and ALP activity in the range 0.3-24 U L-1 with the detection limit of 0.02 U L-1. In addition, a portable assay tube was designed for visual and point-of-care testing of ALP activity by color variation (ratiometric chromaticity). Both the ratiometric fluorescence detection and the visual detection methods were successfully applied to monitor ALP activity in human serum samples with recovery between 95.5%-109.0% and 94.0%-110.1%, and relative standard deviation less than 8.1% and 9.5%, respectively. As far as we know, this is the first report of ALP activity assay assisted by multifunctional Ln-MOF.Graphical abstract.

Double-Color Lanthanide Metal-Organic Framework Based Logic Device and Visual Ratiometric Fluorescence Water Microsensor for Solid Pharmaceuticals.

Water is one of the most widespread impurities and contaminants for pharmaceuticals and chemical products. A simple, fast and reliable water assay method is of high significance for the pharmaceutical and chemical manufacturing industries. In this work, lanthanide metal-organic framework Eu-dipicolinic acid/2-aminophthalic acid (Eu-DPA/PTA-NH2) was prepared as a double-color ratiometric fluorescent water sensor, which shows ultrasensitive (limit of detection 0.01% v/v) and linear broad-range (0-100% v/v) response to water. An innovative analytical device based on a one-to-two logic gate was constructed by using the water content and the two fluorescence responses as the input and output signals, respectively. The direct analysis of water content can be achieved by the four output types, NOT (0, 1), PASS 0 (0, 0), PASS 1 (1, 1), and YES (1, 0). Importantly, the metal-organic framework (MOF)-loaded fiber paper was prepared as a microsensor, and a water assay tube was designed for rapid water detection of solid pharmaceuticals via ratiometric chromaticity, coupled with a portable visual determination device. The paper-based microsensor is response-rapid (20 s), long-term stable (at least 30 days), and can achieve the accurate (relative error <9.8%) visual assay of trace water in solid pharmaceuticals. To our knowledge, this is the first time to report an MOF-based double-color ratiometric fluorescent water sensor, a water analytical logic device, and a paper-based water microsensor for point-of-care visual water assay in solid samples via ratiometric chromaticity.

Depsidone and xanthones from Garcinia xanthochymus with hypoglycemic activity and the mechanism of promoting glucose uptake in L6 myotubes.

Garcinia xanthochymus is a widely used folk medicine in southwestern China. Previous studies indicated it possesses potential anti-diabetic activities both in vitro (Fu et al., 2014; Nguyen et al., 2017) and in vivo (Shivanand et al., 2017). To discover bioactive ingredients from it and unveil their mechanism of action against diabetes, the present study was designed to isolate constituents from extract of G. xanthochymus, determine their structures, screen their activities and investigate mechanism of action of the active substances. Twenty compounds including a new depsidone named garciniadepsidone A (20) and 19 known xanthones were obtained. All of them were screened to discover the active compounds with anti-diabetic activities. Finally, three xanthones including 12b-hydroxy-des-d-garcigerrin (5), 1,2,5,6-tretrahydroxy-4-(1,1-dimethyl-2-propenyl)-7-(3-methyl-2-butenyl) xanthone (13) and 1,5,6-trihydroxy-7,8-di(3-methyl-2-butenyl)-6',6'-dimethylpyrano (2',3':3,4) xanthone (18) were found to be able to significantly stimulate the glucose uptake in the skeleton muscle cells. The effects of the three compounds were comparable to those of insulin and metformin. Based on molecular mechanistic study, it was found that both of compound 5 and 13 promoted glucose uptake by activating phosphatidylinositol-3 kinase (PI3K)/the serine/threonine kinase protein kinase B (PKB/Akt) signaling pathway and AMP-activated protein kinase (AMPK) signaling pathway, resulting in the translocation of GLUT4 in L6 myotubes without affecting the expression of GLUT4. Compound 5 and 13 have great potential to be developed as promising leads to target diabetes.

Hexafluoroisopropanol-induced catanionic-surfactants-based coacervate extraction for analysis of lysozyme.

A coacervate extraction method, based on hexafluoroisopropanol (HFIP)-induced catanionic surfactants and coupled with a back-extraction procedure, was developed for separation and purification of proteins, using sodium dodecyl sulfate (SDS) and dodecyltrimethyl ammonium bromide (DTAB) as representative catanionic surfactants and lysozyme as a model protein. After the coacervate extraction and back extraction, the obtained lysozyme solutions were examined in terms of quantitative analysis by capillary electrophoresis, bacteriolytic activity, and circular dichroism (CD). The effects of several parameters including back-extraction solvent, HFIP content, total surfactant concentration, and SDS/DTAB molar ratio were investigated in detail on the extraction efficiency and activity of lysozyme. Under the optimized extraction conditions (66 mM KH2PO4 buffer with pH 6.2 as back-extraction solvent, SDS/DTAB molar ratio = 1:1 mol/mol, total surfactant concentration = 30 mM, HIFP concentration = 8 % v/v), the extraction recovery was 89.8 % (±4.7, n = 3), limit of detection was 2.2 (±0.3, n = 3) µg mL-1, and meanwhile nearly 65 % of native lysozyme activity was retained. In addition, the activity and CD assays showed that SDS/DTAB molar ratio had a significant influence on the activity and structure of lysozyme after extraction. The DTAB-rich extraction systems, in which the DTAB mole fraction was equal to or larger than 70 %, could keep the activity and structure of lysozyme almost in the native state. Graphical Abstract Procedure of HFIP-induced SDS/DTAB coacervate extraction and back extraction of lysozyme.

Hexafluoroisopropanol-mediated cloud point extraction of organic pollutants in water with analysis by high-performance liquid chromatography.

A hexafluoroisopropanol (HFIP)-mediated cloud point extraction (CPE) system was established. A small amount of HFIP (even 1%, v/v) can dramatically reduce the cloud point of Triton X-100 (TX-100) aqueous solution (even to 1 °C) and make liquid-liquid two-phase separation (coacervate phase and aqueous phase) occur at room temperature over a wide range of TX-100 concentration (0.5∼10%, g/mL). HFIP-mediated coacervate phase has smaller volume (volume ratio is 1.8∼8.9% relative to the volume of the total solution with 1∼5% TX-100) and larger micelle aggregates (30∼80 nm in diameter) compared to temperature-induced coacervate phase (volume ratio at 2.8∼14.0%, the diameter of micelle aggregates at 5∼30 nm). HFIP-mediated CPE was coupled to high-performance liquid chromatography with ultraviolet detection (HPLC-UV) for the extraction and detection of organic pollutants in water, namely, polycyclic aromatic hydrocarbons (PAHs), fluoroquinolones (FQs), and sulfonamides (SAs) with different polarities, charges, and hydrogen-bonding properties. HFIP-mediated CPE provides much higher extraction rates (ERs) and enrichment factors (EFs) for FQs (91∼106%, 50∼59), PAHs (63∼90%, 33∼49), and SAs (26∼55%, 16∼34) compared with the temperature-induced one (ERs: 4∼8% for FQs, 25∼46% for PAHs, and 4∼37% for SAs; EFs: 1∼3 for FQs, 6∼12 for PAHs, and 8∼13 for SAs). The limit of detection ranges from 0.24 to 0.33 ng/mL for FQs, 0.04 to 0.38 ng/mL for PAHs, and 0.63 to 1.31 ng/mL for SAs. The proposed method was applied in the analysis of real water samples, and the recovery of 79.4∼110.8% and the relative standard deviation of 0.2∼16.3% were achieved for the three types of pollutants. Graphical abstract Schematic illustration of HFIP-mediated cloud point extraction.

Facile one-pot synthesis of a aptamer-based organic-silica hybrid monolithic capillary column by "thiol-ene" click chemistry for detection of enantiomers of chemotherapeutic anthracyclines.

In the current study, we developed a facile strategy for the one-pot synthesis of an aptamer-based organic-silica hybrid monolithic capillary column. A 5'-SH-modified aptamer, specifically targeting doxorubicin, was covalently modified in the hybrid silica monolithic column by a sol-gel method combined with "thiol-ene" click reaction. The prepared monolithic column had good stability and permeability, large specific surface, and showed excellent selectivity towards chemotherapeutic anthracyclines of doxorubicin and epirubicin. In addition, the enantiomers of doxorubicin and epirubicin can be easily separated by aptamer-based affinity monolithic capillary liquid chromatography. Furthermore, doxorubicin and epirubicin spiked in serum and urine were also successfully determined, which suggested that the complex biological matrix had a negligible effect on the detection of doxorubicin and epirubicin. Finally, we quantified the concentration of epirubicin in the serum of breast cancer patients treated with epirubicin by intravenous injection. The developed analytical method is cost-effective and rapid, and biological samples can be directly analyzed without any tedious sample pretreatment, which is extremely useful for monitoring medicines in serum and urine for pharmacokinetic studies.

Hexafluoroisopropanol-induced coacervation in aqueous mixed systems of cationic and anionic surfactants for the extraction of sulfonamides in water samples.

Hexafluoroisopropanol (HFIP)-induced coacervation in aqueous mixed systems of catanionic surfactants of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) was described in detail, and its application in the extraction of strongly polar sulfonamides (SAs) was investigated. With 10 % (v/v) HFIP inclusion, coacervation formation and two-phase separation occur in a wide range of SDS/DTAB mole ratios (88:12∼0:100 mol/mol) and total surfactant concentrations (10∼200 mmol/L). The interactions between HFIP and DTAB play an important role in coacervation formation. The HFIP-induced SDS-DTAB coacervation extraction proves to be an efficient method for the extraction and preconcentration of SAs. Both hydrophobic interaction and polar interactions (hydrogen-bond, electrostatic, and π-cation) contribute to the distribution of SAs into coacervate phase. The proposed HFIP-induced SDS-DTAB coacervation extraction combined with HPLC-UV was employed for the extraction and quantitative determination of SAs in environmental water samples. Limits of detection were 1.4∼2.5 ng mL(-1). Excellent linearity with correlation coefficients from 0.9990 to 0.9995 was obtained in the concentration of 0.01∼10 µg mL(-1). Relative recoveries were in the range of 93.4∼105.9 % for analysis of the lake, underground, and tap water samples spiked with SAs at 0.01, 1.0, and 10 µg/mL, respectively. Relative standard deviations were 0.7∼3.2 % for intraday precision and 1.3∼4.6 % for interday precision (n = 3). Concentration factors were 17∼49 for three water samples spiked with 0.01 µg/mL SAs. The results demonstrate that the proposed extraction method is feasible for the preconcentration and determination of trace SAs in real water samples.

Quantitative study of cellular heterogeneity in doxorubicin uptake and its pharmacological effect on cancer cells.

Cellular heterogeneity in doxorubicin (DOX) uptake and its relationship with pharmacological effect on cancer cells were quantitatively investigated for the first time. An in vitro experimental model was established by treating human leukemia K562 and breast cancer MCF-7 cells with different schedules of DOX with or without surface P-glycoprotein (P-gp) inhibitor verapamil (VER). The cellular heterogeneity in DOX uptake was quantitatively examined by single-cell analysis using capillary electrophoresis coupled with laser-induced fluorescence detection. The corresponding cytotoxic effect was tested by cellular morphology, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium and flow cytometry assays. The expression of cellular membrane surface P-gp was determined by flow cytometry. Results showed that the cellular heterogeneity exists in DOX uptake. The single-high DOX schedule leads to lower uptake heterogeneity and higher mean drug uptake. The cellular heterogeneity in DOX uptake was found to be negatively correlated with drug cytotoxicity and surface P-gp expression, with r = -0.7680 to ~ -0.9587. VER reduces the cellular variation in DOX uptake, suggesting that surface P-gp may be one of the causes of the cellular heterogeneity in DOX uptake. This research demonstrates the importance of quantitative study of cellular heterogeneity in drug uptake and its potential application in drug schedule design, response prediction and therapy modulation.

Solvent-tuned perovskite heterostructures enable visual linoleic acid assay and edible oil species discrimination via wavelength shift.

Linoleic acid (LA) detection and edible oils discrimination are essential for food safety. Recently, CsPbBr3@SiO2 heterostructures have been widely applied in edible oil assays, while deep insights into solvent effects on their structure and performance are often overlooked. Based on the suitable polarity and viscosity of cyclohexane, we prepared CsPbBr3@SiO2 Janus nanoparticles (JNPs) with high stability in edible oil and fast halogen-exchange (FHE) efficiency with oleylammonium iodide (OLAI). LA is selectively oxidized by lipoxidase to yield hydroxylated derivative (oxLA) capable of reacting with OLAI, thereby bridging LA content to naked-eye fluorescence color changes through the anti-FHE reaction. The established method for LA in edible oils exhibited consistent results with GC-MS analysis (p > 0.05). Since the LA content difference between edible oils, we further utilized chemometrics to accurately distinguish (100%) the species of edible oils. Overall, such elaborated CsPbBr3@SiO2 JNPs enable a refreshing strategy for edible oil discrimination.

Trinity Strategy: Enabling Perovskite as Hydrophilic and Efficient Fluorescent Nanozyme for Constructing Biomarker Reporting Platform.

Water instability and sensing homogeneity are the Achilles' heel of CsPbX3 NPs in biological fluids application. This work reports the preparation of Mn2+:CsPbCl3@SiO2 yolk-shell nanoparticles (YSNPs) in aqueous solutions created through the integration of ligand, surface, and crystal engineering strategies. The SN2 reaction between 4-chlorobutyric acid (CBA) and oleylamine (OAm) yields a zwitterionic ligand that facilitates the dispersion of YSNPs in water, while the robust SiO2 shell enhances their overall stability. Besides, Mn2+ doping in YSNPs not only introduces a second emission center but also enables potential postsynthetic designability, leading to the switching from YSNPs to MnO2@YSNPs with excellent oxidase (OXD)-like activity. Theoretical calculations reveal that electron transfer from CsPbCl3 to in situ MnO2 and the adsorption-desorption process of 3,3',5,5'-tetramethylbenzidine (TMB) synergistically amplify the OXD-like activity. In the presence of ascorbic acid (AA), Mn4+ in MnO2@YSNPs (fluorescent nanozyme) is reduced to Mn2+ and dissociated, thereby inhibiting the OXD-like activity and triggering fluorescence "turn-on/off", i.e., dual-mode recognition. Finally, a biomarker reporting platform based on MnO2@YSNPs fluorescent nanozyme is constructed with AA as the reporter molecule, and the accurate detection of human serum alkaline phosphatase (ALP) is realized, demonstrating the vast potential of perovskites in biosensing.

Hierarchical Self-Assembly Molecular Building Blocks as Intelligent Nanoplatforms for Ovarian Cancer Theranostics.

Hierarchical self-assembly from simple building blocks to complex polymers is a feasible approach to constructing multi-functional smart materials. However, the polymerization process of polymers often involves challenges such as the design of building blocks and the drive of external energy. Here, a hierarchical self-assembly with self-driven and energy conversion capabilities based on p-aminophenol and diethylenetriamine building blocks is reported. Through ß-galactosidase (ß-Gal) specific activation to the self-assembly, the intelligent assemblies (oligomer and superpolymer) with excellent photothermal and fluorescent properties are dynamically formed in situ, and thus the sensitive multi-mode detection of ß-Gal activity is realized. Based on the overexpression of ß-Gal in ovarian cancer cells, the self-assembly superpolymer is specifically generated in SKOV-3 cells to achieve fluorescence imaging. The photothermal therapeutic ability of the self-assembly oligomer (synthesized in vitro) is evaluated by a subcutaneous ovarian cancer model, showing satisfactory anti-tumor effects. This work expands the construction of intelligent assemblies through the self-driven cascade assembly of small molecules and provides new methods for the diagnosis and treatment of ovarian cancer.

Nanoporous Crystalline Materials for the Recognition and Applications of Nucleic Acids.

Nucleic acid plays a crucial role in countless biological processes. Hence, there is great interest in its detection and analysis in various fields from chemistry, biology, to medicine. Nanoporous crystalline materials exhibit enormous potential as an effective platform for nucleic acid recognition and application. These materials have highly ordered and uniform pore structures, as well as adjustable surface chemistry and pore size, making them good carriers for nucleic acid extraction, detection, and delivery. In this review, the latest developments in nanoporous crystalline materials, including metal organic frameworks (MOFs), covalent organic frameworks (COFs), and supramolecular organic frameworks (SOFs) for nucleic acid recognition and applications are discussed. Different strategies for functionalizing these materials are explored to specifically identify nucleic acid targets. Their applications in selective separation and detection of nucleic acids are highlighted. They can also be used as DNA/RNA sensors, gene delivery agents, host DNAzymes, and in DNA-based computing. Other applications include catalysis, data storage, and biomimetics. The development of novel nanoporous crystalline materials with enhanced biocompatibility has opened up new avenues in the fields of nucleic acid analysis and therapy, paving the way for the development of sensitive, selective, and cost-effective diagnostic and therapeutic tools with widespread applications.

A selective dual-response biosensor for tyrosinase monophenolase activity based on lanthanide metal-organic frameworks assisted boric acid-levodopa polymer dots.

Tyrosinase (TYR) monophenolase activity plays a key role in the development of diseases such as melanoma. The selective and sensitive detection of TYR monophenolase activity is a persistent challenge. Here, by integrating fluorescent polymer dots and a luminescent lanthanide metal-organic framework (Ln-MOF), we proposed an on-off dual-response biosensor for the sensitive and selective detection of TYR monophenolase. The Ln-MOF was prepared with Eu3+ and monoaromatic ligand dipicolinic acid (DPA), and it plays multiple functions such as fluorescent internal standard, chromaticity shift enhancement and fluorescence sensing. In alkaline boric acid (BA) buffer, L-tyrosine is converted into BA-levodopa by TYR monophenolase. Then, with the assistance of Eu-DPA, BA-levodopa is initiated by diethylaminepropyltrimethoxysilane (DAMO) to generate BA-levodopa polymer dots, which turn on strong blue fluorescence (crosslink-enhanced emission) and meanwhile quench the red fluorescence of Eu-DPA through enhanced photo-induced electron transfer. Thus, the sensitive and selective dual-response sensing to TYR monophenolase is achieved. Both DAMO and BA play significant roles in the synthesis of strong fluorescence polymer dots, and another key role of BA is to inhibit TYR diphenolase activity. Furthermore, chromaticity shift value-based quantification greatly improves the response linearity. The linear range is 0.05-2 U mL-1 (r = 0.9966), and the limit of detection is 0.004 U mL-1. The precise and accurate quantification of TYR monophenolase activity in saliva samples is realized (recovery of 96.9-102.0%, relative standard deviation < 9.56%). To our knowledge, it is the first highly-sensitive double-response biosensor for TYR monophenolase activity.

Long-chain alkanol-alkyl carboxylic acid-based low-viscosity hydrophobic deep eutectic solvents for one-pot extraction of anthraquinones from Rhei Radix et Rhizoma.

Natural long-chain alkanol and alkyl carboxylic acid were used to prepare novel hydrophobic deep eutectic solvents (HDESs). These HDESs are liquid at room temperature and have low viscosity (<12.26 mPa‧s), low polarity (lower than that of methanol, ChCl-based deep eutectic solvents and other reported HDESs), and low density (<0.928 g/mL). A simple one-pot method based on a novel HDES-water two-phase extraction system was constructed for the extraction of weak-polarity bioactive components, anthraquinones, from Rhei Radix et Rhizoma. This HDES-based new extraction method does not consume hazardous organic solvents and can obtain a total anthraquinone yield of 21.52 mg/g, which is close to that obtained by the Chinese pharmacopoeia method (21.22 mg/g) and considerably higher than those by other reported HDESs-based extraction methods (14.20-20.09 mg/g, p < 0.01). The high extraction yield can be mainly attributed to the severe destruction of the RRR cell walls by the extraction system and the excellent dissolving ability of novel HDESs for anthraquinones.