ADNP modulates SINE B2-derived CTCF-binding sites during blastocyst formation in mice.

CTCF is crucial for chromatin structure and transcription regulation in early embryonic development. However, the kinetics of CTCF chromatin occupation in preimplantation embryos have remained unclear. In this study, we used CUT&RUN technology to investigate CTCF occupancy in mouse preimplantation development. Our findings revealed that CTCF begins binding to the genome prior to zygotic genome activation (ZGA), with a preference for CTCF-anchored chromatin loops. Although the majority of CTCF occupancy is consistently maintained, we identified a specific set of binding sites enriched in the mouse-specific short interspersed element (SINE) family B2 that are restricted to the cleavage stages. Notably, we discovered that the neuroprotective protein ADNP counteracts the stable association of CTCF at SINE B2-derived CTCF-binding sites. Knockout of Adnp in the zygote led to impaired CTCF binding signal recovery, failed deposition of H3K9me3, and transcriptional derepression of SINE B2 during the morula-to-blastocyst transition, which further led to unfaithful cell differentiation in embryos around implantation. Our analysis highlights an ADNP-dependent restriction of CTCF binding during cell differentiation in preimplantation embryos. Furthermore, our findings shed light on the functional importance of transposable elements (TEs) in promoting genetic innovation and actively shaping the early embryo developmental process specific to mammals.

Defining the Hoxb8 cell lineage during murine definitive hematopoiesis.

Previously, we have demonstrated that a subpopulation of microglia, known as Hoxb8 microglia, is derived from the Hoxb8 lineage during the second wave (E8.5) of yolk sac hematopoiesis, whereas canonical non-Hoxb8 microglia arise from the first wave (E7.5). Hoxb8 microglia have an ontogeny distinct from non-Hoxb8 microglia. Dysfunctional Hoxb8 microglia cause the acquisition of chronic anxiety and an obsessive-compulsive spectrum-like behavior, trichotillomania, in mice. The nature and fate of the progenitors generated during E8.5 yolk sac hematopoiesis have been controversial. Herein, we use the Hoxb8 cell lineage reporter to define the ontogeny of hematopoietic cells arising during the definitive waves of hematopoiesis initiated in the E8.5 yolk sac and aorta-gonad-mesonephros (AGM) region. Our murine cell lineage analysis shows that the Hoxb8 cell lineage reporter robustly marks erythromyeloid progenitors, hematopoietic stem cells and their progeny, particularly monocytes. Hoxb8 progenitors and microglia require Myb function, a hallmark transcription factor for definitive hematopoiesis, for propagation and maturation. During adulthood, all immune lineages and, interestingly, resident macrophages in only hematopoietic/lymphoid tissues are derived from Hoxb8 precursors. These results illustrate that the Hoxb8 lineage exclusively mirrors murine definitive hematopoiesis.

Launching a Drop via Interplay of Buoyancy and Stick-Jump Dissolution.

According to Archimedes' principle, a submerged object with a density lower than that of aqueous acid solution is more buoyant than a smaller one. In this work, a remarkable phenomenon is reported wherein a dissolving drop on a substrate rises in the water only after it has diminished to a much smaller size, though the buoyancy is smaller. The drop consisting of a polymer solution reacts with the acid in the surrounding, yielding a water-soluble product. During drop dissolution, water-rich microdroplets form within the drop, merging with the external aqueous phase along the drop-substrate boundary. Two key elements determine the drop rise dynamics. The first is the stick-jump behavior during drop dissolution. The second is that buoyancy exerts a strong enough force on the drop at an Archimedean number greater than 1, while the stick-jump behavior is ongoing. The time of the drop rise is controlled by the initial size and the reaction rate of the drop. This novel mechanism for programmable drop rise may be beneficial for many future applications, such as microfluidics, microrobotics, and device engineering where the spontaneous drop detachment may be utilized to trigger a cascade of events in a dense medium.

Spontaneous Rise of Hydrogen Microbubbles in Interfacial Gas Evolution Reaction.

Liquid organic hydrogen carrier is a promising option for the transport and storage of hydrogen as a clean energy source. This study examines the stability and behavior of organic drops immobilized on a substrate during an interfacial hydrogen-evolution reaction (HER) at the drop surface and its surrounding aqueous solution. Hydrogen microbubbles form within the drop and rise to the drop apex. The growth rate of the hydrogen in-drop bubble increases with the concentration of the reactant in the surrounding medium. The drop remains stable till the buoyancy acting on the in-drop bubble is large enough to overcome the capillary force and the external viscous drag. The bubble spontaneously rises and carries a portion drop liquid to the solution surface. These spontaneous rising in-drop bubbles are detected in measurements using a high-precision sensor placed on the upper surface of the aqueous solution, reversing the settling phase from phase separation in the reactive emulsion. The finding from this work provides new insights into the behaviors of drops and bubbles in many interfacial gas evolution reactions in clean technologies.

Transient Zwitterions Dynamics Empowered Adaptive Interface for Ultra-Stable Zn Plating/Stripping.

A highly reversible zinc anode is crucial for the commercialization of zinc-ion batteries. However, the change in the microstructure of the electric double layer originated from the dynamic change in charge density on the electrode greatly impacts anode reversibility during charge/discharge, which is rarely considered in previous research. Herein, the zwitterion additive is employed to create an adaptive interface by coupling the transient zwitterion dynamics upon the change of interfacial charge density. Ab initio molecular dynamics simulations suggest the molecular orientation and adsorption groups of zwitterions will be determined by the charging state of the electrode. ZnSO4 electrolyte with zwitterion fulfills a highly reversible Zn anode with an average Coulombic efficiency of up to 99.85%. Zn/Zn symmetric cells achieve greatly enhanced cycling stability for 700 h with extremely small voltage hysteresis of 29 mV under 5 mA cm-2 with 5 mAh cm-2 . This study validates the adaptive interface based on transient dynamics of zwitterions, which sheds new light on developing highly reversible metal anodes with a high utilization rate.

MXene/Nitrogen-Doped Carbon Nanosheet Scaffold Electrode toward High-Performance Solid-State Zinc Ion Supercapacitor.

While MXene is widely used as an electrode material for supercapacitor, the intrinsic limitation of stacking caused by the interlayer van der Waals forces has yet to be overcome. In this work, a strategy is proposed to fabricate a composite scaffold electrode (MCN) by intercalating MXene with highly nitrogen-doped carbon nanosheets (CN). The 2D structured CN, thermally converted and pickling from Zn-hexamine (Zn-HMT), serves as a spacer that effectively prevents the stacking of MXene and contributes to a hierarchically scaffolded structure, which is conducive to ion movement; meanwhile, the high nitrogen-doping of CN tunes the electronic structure of MCN to facilitate charge transfer and providing additional pseudocapacitance. As a result, the MCN50 composite electrode achieves a high specific capacitance of 418.4 F g-1 at 1 A g-1. The assembled symmetric supercapacitor delivers a corresponding power density of 1658.9 W kg-1 and an energy density of 30.8 Wh kg-1. The all-solid-state zinc ion supercapacitor demonstrates a superior energy density of 68.4 Wh kg-1 and a power density of 403.5 W kg-1 and shows a high capacitance retention of 93% after 8000 charge-discharge cycles. This study sheds a new light on the design and development of novel MXene-based composite electrodes for high performance all-solid-state zinc ion supercapacitor.

All-solid highly sensitive fiber-tip magnetic field sensor based on a Fabry-Perot interferometer with a breakpoint structure.

An all-solid fiber-tip Fabry-Perot interferometer (FPI) coated with a nickel film is proposed and experimentally verified for magnetic field sensing with high sensitivity. It is fabricated by splicing a segment of a thin-wall capillary tube to a standard single-mode fiber (SMF), then inserting a tiny segment of fiber with a smaller diameter into the capillary tube, and creating an ultra-narrow air-gap at the SMF end to form an FPI. When the device is exposed to magnetic field, the capillary tube is strained due to the magnetostrictive effect of the nickel film coated on its outer surface. In addition, owing to the unique breakpoint sensitivity-enhancement structure of the air-gap FPI, the elongation of the capillary tube whose length is over 100 times longer than the air-gap width is entirely transferred to the cavity length change of the FPI, and the sensor is extremely sensitive to the magnetic field as proved by our experiments, achieving a high sensitivity of up to 2.236 nm/mT for a linear magnetic field range from 40 to 60 mT, as well as a low-temperature cross-sensitivity of 56 µT/°C. The all-solid stable structure, compact size (total length of ∼3.0 mm), and reflective working mode with high magnetic field sensitivity indicate that this sensor has good application prospects.

Hypofractionated radiotherapy for refractory or relapsed aggressive B-cell lymphoma in the rituximab era.

BACKGROUND: Radiotherapy (RT) is an effective and available local treatment for patients with refractory or relapsed (R/R) aggressive B-cell lymphomas. However, the value of hypofractionated RT in this setting has not been confirmed. METHODS: We retrospectively analyzed patients with R/R aggressive B-cell lymphoma who received hypofractionated RT between January 2020 and August 2022 at a single institution. The objective response rate (ORR), overall survival (OS), progression-free survival (PFS) and acute side effects were analyzed. RESULTS: A total of 30 patients were included. The median dose for residual disease was 36 Gy, at a dose per fraction of 2.3-5 Gy. After RT, the ORR and complete response (CR) rates were 90% and 80%, respectively. With a median follow-up of 10 months (range, 2-27 months), 10 patients (33.3%) experienced disease progression and three died. The 1-year OS and PFS rates for all patients were 81.8% and 66.3%, respectively. The majority (8/10) of post-RT progressions involved out-of-field relapses. Patients with relapsed diseases, no response to systemic therapy, multiple lesions at the time of RT, and no response to RT were associated with out-of-field relapses. PFS was associated with response to RT (P = 0.001) and numbers of residual sites (P < 0.001). No serious non-hematological adverse effects (≥ grade 3) associated with RT were reported. CONCLUSION: These data suggest that hypofractionated RT was effective and tolerable for patients with R/R aggressive B-cell lymphoma, especially for those that exhibited localized residual disease.

Model-based dosing optimization and therapeutic drug monitoring practices of teicoplanin in patients with complicated or non-complicated methicillin-resistant staphylococcus aureus infection.

AIMS: This study aims to establish a population pharmacokinetic (PK) model of teicoplanin in Chinese adult patients to evaluate the dosing regimen in the label sheet and optimize it. METHODS: Nonlinear mixed-effects modelling was used to estimate PK parameters. Monte Carlo simulations were used to evaluate the attainment of various dosing regimens in achieving the target trough concentrations in patients with normal or decreased renal function. RESULTS: A total of 115 patients were enrolled in this retrospective study. Creatinine clearance (CrCL) and albumin (ALB) were identified as covariates on the clearance of teicoplanin. For the treatment of non-complicated methicillin-resistant Staphylococcus aureus (MRSA) infections in patients with normal renal function and serum ALB concentration, the recommended dosing regimen was 600 mg q12h with five administrations as the loading dose followed by 600 mg qd as the maintenance dose; for the treatment of serious and/or complicated MRSA infections, the recommended dosing regimen was 800 mg q12h with five administrations as the loading dose followed by 800 mg qd as the maintenance dose. It is worth noting that both the loading and maintenance doses ought to be modified based on the patient's renal function and serum ALB concentration. In addition, trough concentrations of teicoplanin were significantly increased every other week. CONCLUSIONS: Both loading dosing and maintenance dosing regimens were recommended to be adjusted according to patient's renal function and serum ALB concentration. In addition, it is necessary to perform follow-up therapeutic drug monitoring of teicoplanin at least once every week.

The progression of obstructive renal fibrosis in rats is regulated by ADAMTS18 gene methylation in the embryonic kidney through the AKT/Notch pathway.

This study aimed to explore the mechanism by which postembryonic renal ADAMTS18 methylation influences obstructive renal fibrosis in rats. After exposure to transforming growth factor (TGF)-ß1 during the embryonic period, analysis of postembryonic renal ADAMTS18 methylation and expression levels was conducted. Histological analysis was performed to assess embryonic kidney lesions and damage. Western blot analysis was used to determine the expression of renal fibrosis markers. Rats with ureteral obstruction and a healthy control group were selected. The methylation levels of ADAMTS18 in the different groups were analyzed. Western blot analysis and immunohistochemistry were performed to analyze the expression of renal fibrosis markers, and kidney-related indicators were measured. Treatment with TGF-ß1 resulted in abnormal development of the postembryonic kidney, which was characterized by rough kidney surfaces with mild depressions and irregularities on the outer surface. TGF-ß1 treatment significantly promoted ADAMTS18 methylation and activated the protein kinase B (AKT)/Notch pathway. Ureteral obstruction was induced to establish a renal hydronephrosis model, which led to renal fibrotic injury in newborn rats. Overexpression of the ADAMTS18 gene alleviated renal fibrosis. The western blot results showed that compared to that in the control group, the expression of renal fibrosis markers was significantly decreased after ADAMTS18 overexpression, and there was a thicker renal parenchymal tissue layer and significantly reduced p-AKT/AKT and Notch1 levels. TGF-ß1 can induce ADAMTS18 gene methylation in the postembryonic kidney, and the resulting downregulation of ADAMTS18 expression has long-term effects on kidney development, potentially leading to increased susceptibility to obstructive renal fibrosis. This mechanism may involve activation of the AKT/Notch pathway. Reversing ADAMTS18 gene methylation may reverse this process.

Catabolism of phenolics from grape peel and its effects on gut microbiota during in vitro colonic fermentation.

BACKGROUND: Grape peels, the main by-products of wine processing, are rich in bioactive ingredients of phenolics, including proanthocyanidins, flavonoids and anthocyanins. Phenolics have the function of regulating intestinal microbiota and promoting intestinal health. From the perspective of the dietary nutrition of grape peel phenolics (GPP), the present study aimed to investigate the influence of GPP on the composition and metabolism of human gut microbiota during in vitro fermentation. RESULTS: The results indicated that GPP could decrease pH and promote the production of short-chain fatty acids. ACE and Chao1 indices in GPP group were lower than that of the Blank group. GPP enhanced the levels of Lachnospiraceae UCG-004, Bacteroidetes and Roseburia, but reduced the Firmicutes/Bacteroidetes ratio. Kyoto Encyclopedia of Proteins and Genome enrichment pathways related to phenolic acid metabolism mainly included flavonoid, anthocyanin, flavone and flavonol biosynthesis. Gut microbiota could accelerate the release and breakdown of phenolic compounds, resulting in a decrease in the content of hesperetin-7-O-glucoside, delphinidin-3-O-glucoside and cyanidin-3-rutinoside etc. In vitro antibacterial test found that GPP increased the diameters of the inhibition zones of Escherichia coli and Staphylococcus aureus in a dose-dependent manner. CONCLUSION: The results of the present study revealed that GPP might be a potential prebiotic-like to prevent diseases by improving gut health. The findings could provide a theoretical basis for the potential to exploit GPP as dietary nutrition to maintain intestinal function. © 2024 Society of Chemical Industry.

Discordant Distortion in Cubic GeMnTe2 and High Thermoelectric Properties of GeMnTe2-x%SbTe.

GeMnTe2 adopts a cubic rock salt structure and is a promising mid-temperature thermoelectric material. The pair distribution function analysis of neutron total scattering data, however, indicates that GeMnTe2 is locally distorted from the ideal rock salt structure with Ge2+ cations being discordant and displaced ∼0.3 Å off the octahedron center. By alloying GeMnTe2 with SbTe, the carrier concentration can be tuned in GeMnTe2-x%SbTe (x = 15.1), leading to converged multiple broad valence bands and a high Seebeck coefficient of >200 µV K-1 from 300 to 823 K. The system exhibits a large density-of-state effective mass of >10 me and a high weighted mobility of 80 cm2 V-1 s-1, leading to a power factor of 15 µWcm-1 K-2 at 823 K. The composition GeMnTe2-15.1%SbTe exhibits very low lattice thermal conductivity of ∼0.5 Wm-1 K-1 at 823 K, attributed to the combination of off-centering cations in the rock salt structure, Ge/Mn positional disorder, dislocations, and abundant Ge-rich and Mn-rich nanoparticles. A ZT value of ∼1.5 can be achieved for GeMnTe2-15.1%SbTe with a ZTave of 0.96 in the temperature range of 400-823 K.

A Simple and Effective Physical Ball-Milling Strategy to Prepare Super-Tough and Stretchable PVA@MXene@PPy Hydrogel for Flexible Capacitive Electronics.

Biomimetic flexible electronics for E-skin have received increasing attention, due to their ability to sense various movements. However, the development of smart skin-mimic material remains a challenge. Here, a simple and effective approach is reported to fabricate super-tough, stretchable, and self-healing conductive hydrogel consisting of polyvinyl alcohol (PVA), Ti3 C2 Tx MXene nanosheets, and polypyrrole (PPy) (PMP hydrogel). The MXene nanosheets and Fe3+ serve as multifunctional cross-linkers and effective stress transfer centers, to facilitate a considerable high conductivity, super toughness, and ultra-high stretchability (elongation up to 4300%) for the PMP hydrogel with. The hydrogels also exhibit rapid self-healing and repeatable self-adhesive capacity because of the presence of dynamic borate ester bond. The flexible capacitive strain sensor made by PMP hydrogel shows a relatively broad range of strain sensing (up to 400%), with a self-healing feature. The sensor can precisely monitor various human physiological signals, including joint movements, facial expressions, and pulse waves. The PMP hydrogel-based supercapacitor is demonstrated with a high capacitance retention of ≈92.83% and a coulombic efficiency of ≈100%.

Interaction of PKR with STCS1: an indispensable step in the biosynthesis of lunularic acid in Marchantia polymorpha.

Unlike bibenzyls derived from the vascular plants, lunularic acid (LA), a key precursor for macrocyclic bisbibenzyl synthesis in nonvascular liverworts, exhibits the absence of one hydroxy group within the A ring. It was hypothesized that both polyketide reductase (PKR) and stilbenecarboxylate synthase 1 (STCS1) were involved in the LA biosynthesis, but the underlined mechanisms have not been clarified. This study used bioinformatics analysis with molecular, biochemical and physiological approaches to characterize STCS1s and PKRs involved in the biosynthesis of LA. The results indicated that MpSTCS1s from Marchantia polymorpha catalyzed both C2→C7 aldol-type and C6→C1 Claisen-type cyclization using dihydro-p-coumaroyl-coenzyme A (CoA) and malonyl-CoA as substrates to yield a C6-C2-C6 skeleton of dihydro-resveratrol following decarboxylation and the C6-C3-C6 type of phloretin in vitro. The protein-protein interaction of PKRs with STCS1 (PPI-PS) was revealed and proved essential for LA accumulation when transiently co-expressed in Nicotiana benthamiana. Moreover, replacement of the active domain of STCS1 with an 18-amino-acid fragment from the chalcone synthase led to the PPI-PS greatly decreasing and diminishing the formation of LA. The replacement also increased the chalcone formation in STCS1s. Our results highlight a previously unrecognized PPI in planta that is indispensable for the formation of LA.

An Overview of Metal-Organic Framework Based Electrocatalysts: Design and Synthesis for Electrochemical Hydrogen Evolution, Oxygen Evolution, and Carbon Dioxide Reduction Reactions.

Due to the increasing global energy demands, scarce fossil fuel supplies, and environmental issues, the pursued goals of energy technologies are being sustainable, more efficient, accessible, and produce near zero greenhouse gas emissions. Electrochemical water splitting is considered as a highly viable and eco-friendly energy technology. Further, electrochemical carbon dioxide (CO2 ) reduction reaction (CO2 RR) is a cleaner strategy for CO2 utilization and conversion to stable energy (fuels). One of the critical issues in these cleaner technologies is the development of efficient and economical electrocatalyst. Among various materials, metal-organic frameworks (MOFs) are becoming increasingly popular because of their structural tunability, such as pre- and post- synthetic modifications, flexibility in ligand design and its functional groups, and incorporation of different metal nodes, that allows for the design of suitable MOFs with desired quality required for each process. In this review, the design of MOF was discussed for specific process together with different synthetic methods and their effects on the MOF properties. The MOFs as electrocatalysts were highlighted with their performances from the aspects of hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and electrochemical CO2 RR. Finally, the challenges and opportunities in this field are discussed.

Mechanically-robust electrospun nanocomposite fiber membranes for oil and water separation.

Mechanically-robust nanocomposite membranes have been developed via crosslinking chemistry and electrospinning technique based on the rational selection of dispersed phase materials with high Young's modulus (i.e., graphene and multiwalled carbon nanotubes) and Cassie-Baxter design and used for oil and water separation. Proper selection of dispersed phase materials can enhance the stiffness of nanocomposite fiber membranes while their length has to be larger than their critical length. Chemical modification of the dispersed phase materials with fluorochemcials and their induced roughness were critical to achieve superhydrophobocity. Surface analytic tools including goniometer, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, atomic force microscopy (AFM) and scanning electron microscope (SEM) were applied to characterize the superhydrophobic nanocomposite membranes. An AFM-based nanoindentation technique was used to measure quantitativly the stiffness of the nanocomposite membranes for local region and whole composites, compared with the results by a tensile test technique. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to confirm composition and formation of nanocomposite membranes. These membranes demonstrated excellent oil/water separation. This work has potential application in the field of water purification and remediation.

All-fiber saturable absorber based on slightly tapered graded index multimode fiber for conventional and bound soliton generation.

A slightly tapered graded index multimode fiber (GIMF) is demonstrated as the saturable absorber (SA) for a conventional soliton and tightly bound soliton generation. The SA device is simply a GIMF spliced with single-mode fiber (SMF) at its two ends. The waist diameter of the slightly tapered fiber is ∼23.8µm, located at one of the splicing points of SMF and GIMF. The mode-locked output of conventional solitons and tightly bound solitons can be obtained in a ring fiber laser based on such a SA. The central wavelength of the output conventional solitons is 1563.5 nm, and the pulse width is as short as 473 fs at the fundamental frequency of 19.53 MHz. The central wavelength of the tightly bound solitons is 1563.5 nm, with a pulse width of 636 fs and a separation of 1.89 ps. The device is featured with a simple and robust structure and stable operation capability and can effectively overcome the difficulty in requirement of precise control of the GIMF length, which make it attractive in ultrafast lasers and optical fiber communication systems.

Magnetic-assisted exciton-plasmon interactions modulated Bi2S3 nanorods@MoS2 nanosheets heterojunction: towards a split-type photoelectrochemical sensing of profenofos.

A split-type photoelectrochemical (PEC) sensor was designed for the detection of profenofos (PFF) depending on the magnetic-assisted exciton-plasmon interactions (EPI) between the semiconductor substrate and Au NPs. The core-shell Bi2S3 nanorods@MoS2 nanosheets (Bi2S3 NRs@MoS2 NSs) heterostructure nanomaterial with fascinating performance was synthesized and used as the photovoltaic conversion substrate and signal molecules absorption platform. The PEC sensor is operated by co-incubating with the released Au NPs-cDNA from the surface of magnetic beads, originating from the target-triggered DNA double-stranded structure opening event. Due to the strong EPI effects, the photocurrent of Bi2S3 NRs@MoS2 NSs decreased and varied with the PFF concentrations. The proposed PEC sensor exhibited outstanding analytical performances, including a wide linear range (1.0 pg mL-1~1.0 µg mL-1), low detection limitation (0.23 pg mL-1, at 3 σ/m), excellent specificity, high stability, and applicability. Overall, this work provides a new signal strategy for PEC biosensors and extends its application in environmental analysis.

The value of routine bone marrow examination in patients with extranodal NK/T-cell lymphoma staged with PET/CT.

BACKGROUND: Limited evidence supports the omission of routine bone marrow (BM) examination (biopsy and aspiration) in patients with nasal-type extranodal NK/T-cell lymphoma (ENKTCL). This study was aimed at assessing whether BM examination provides valuable information for positron emission tomography/computed tomography (PET/CT)-based staging in this patient population. PATIENTS AND METHODS: Patients newly diagnosed with ENKTCL who underwent initial staging with both PET/CT and BM examination between 2013 and 2020 were retrospectively identified in two Chinese institutions. Overall, 742 patients were included; the BM examination was positive in 67 patients. RESULTS: Compared with BM biopsy alone, the combination of BM biopsy and aspiration assessment did not afford any additional diagnostic value. No patient with a positive BM biopsy was found to have early-stage disease by PET/CT. BM biopsy or PET/CT led to upstaging from stage III to IV as a result of BM involvement in 21 patients. In 135 patients with distant organ involvement, BM involvement was associated with worse overall survival (OS) and progression-free survival (PFS) compared with the corresponding durations in patients without BM involvement (2-year OS: 35.9% vs. 60.4%, p < .001; PFS: 26% vs. 40.7%, p = .003). No difference in survival was noted between groups judged positive based on PET/CT and BM biopsy. CONCLUSION: Compared with aspiration, BM biopsy led to the detection of more BM lesions. Baseline PET/CT can be safely used to exclude BM involvement in early-stage disease. Overall, routine BM examination affords diagnostic or prognostic value over PET/CT in patients with advanced-stage nasal-type ENKTCL.

Ion Hopping: Design Principles for Strategies to Improve Ionic Conductivity for Inorganic Solid Electrolytes.

Solid electrolytes are considered as an ideal substitution of liquid electrolytes, avoiding the potential hazards of volatilization, flammability, and explosion for liquid electrolyte-based rechargeable batteries. However, there are significant performance gaps to be bridged between solid electrolytes and liquid electrolytes; one with a particular importance is the ionic conductivity which is highly dependent on the material types and structures. In this review, the general physical image of ion hopping in the crystalline structure is revisited, by highlighting two main kernels that impact ion migration: ion hopping pathways and skeletons interaction. The universal strategies to effectively improve ionic conductivity of inorganic solid electrolytes are then systematically summarized: constructing rapid diffusion pathways for mobile ions; and reducing resistance of the surrounding potential field. The scoped strategies offer an exclusive view on the working principle of ion movement regardless of the ion species, thus providing a comprehensive guidance for the future exploitation of solid electrolytes.