RESUMEN
Validation study of simulation codes was performed based on the measurement of a sphere phantom and the National Electrical Manufacturers Association (NEMA) body phantoms. SIMIND and Prominence Processor were used for the simulation. Both source and density maps were generated using the characteristics of 99mTc energy. A full width at half maximum (FWHM) of the sphere phantom was measured and simulated. Simulated recovery coefficient and the background count coefficient of variation were also compared with the measured values in the body phantom study. When the two simulation codes were compared with actual measurements, maximum relative errors of FWHM values were 3.6% for Prominence Processor and -10.0% for SIMIND. The maximum relative errors of relative recovery coefficients exhibited 11.8% for Prominence Processor and -2.0% for SIMIND in the body phantom study. The coefficients of variation of the SPECT count in the background were significantly different among the measurement and two simulation codes. The simulated FWHM values and recovery coefficients paralleled measured results. However, the noise characteristic differed among actual measurements and two simulation codes in the background count statistics.
Asunto(s)
Tomografía Computarizada de Emisión de Fotón Único , Simulación por Computador , Fantasmas de ImagenRESUMEN
PURPOSE: We evaluated the effect that collection angle and collection orbit condition gave to an image quantitatively by simulating the single photon emission computed tomography (SPECT) system. METHOD: Using the Software Package of the Nuclear Medicine Data Processor for Research, we performed making of the myocardial digital phantom, three ways of different simulation of the collection angle and collection orbit, and making of reference of the uniform picture element level. We calculated NMSE for uniformity evaluation and calculated myocardial thickness full width at half maximum (FWHM) for a spatial resolution evaluation. RESULTS: 360 degrees circular orbit collection had best uniformity. 180 degrees noncircular orbit collection had best spatial resolution. CONCLUSION: By using the digital phantom, we focused on only collection angle and collection orbit condition, and focused on two indexes of the uniformity and the spatial resolution and were able to show a quantitative index.
Asunto(s)
Corazón/diagnóstico por imagen , Miocardio , Tomografía Computarizada de Emisión de Fotón Único/instrumentación , Humanos , Fantasmas de Imagen , Radiografía , Tomografía Computarizada de Emisión de Fotón Único/métodosRESUMEN
The objectives of this study were to develop a method for quantifying myocardial K(1) and blood flow (MBF) with minimal operator interaction by using a Patlak plot method and to compare the MBF obtained by perfusion MRI with that from coronary sinus blood flow in the resting state. A method that can correct for the nonlinearity of the blood time-signal intensity curve on perfusion MR images was developed. Myocardial perfusion MR images were acquired with a saturation-recovery balanced turbo field-echo sequence in 10 patients. Coronary sinus blood flow was determined by phase-contrast cine MRI, and the average MBF was calculated as coronary sinus blood flow divided by left ventricular (LV) mass obtained by cine MRI. Patlak plot analysis was performed using the saturation-corrected blood time-signal intensity curve as an input function and the regional myocardial time-signal intensity curve as an output function. The mean MBF obtained by perfusion MRI was 86 +/- 25 ml/min/100 g, showing good agreement with MBF calculated from coronary sinus blood flow (89 +/- 30 ml/min/100 g, r = 0.74). The mean coefficient of variation for measuring regional MBF in 16 LV myocardial segments was 0.11. The current method using Patlak plot permits quantification of MBF with operator interaction limited to tracing the LV wall contours, registration, and time delays.
Asunto(s)
Velocidad del Flujo Sanguíneo , Circulación Coronaria , Estenosis Coronaria/diagnóstico , Aumento de la Imagen/métodos , Angiografía por Resonancia Magnética/métodos , Imagen por Resonancia Cinemagnética/métodos , Algoritmos , Artefactos , Medios de Contraste , Femenino , Humanos , Masculino , Persona de Mediana Edad , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
We evaluated quantitation accuracy of the specific binding ratio (SBR) and specific uptake ratio (SUR) of dopamine transporter for various correction methods by using a novel three-dimensional striatum digital brain (3D-SDB) phantom comprised of segments containing the striatum, ventricle, brain parenchyma, and skull bone extracted from T2-weighted MR images. A process image was reconstructed by projection data sets with blurring, scatter, and attenuation from 3D-SDB phantom data. A 3D-iterative reconstruction algorithm was used without correction (OSEM), or with scatter (SC), attenuation (AC), AC + SC (ACSC), AC + resolution recovery (RR; ACRR), SC + RR (SCRR), AC + SC + RR (ACSCRR), AC + SC + RR + partial volume (PVC; ACSCRRP), and AC + SC + RR + PVC + ventricle (ACSCRRPV). Data were then quantified using SBR and SUR. Differences between measured and true SBR values were (in order): ACSCRR < ACSC < ACRR < AC < SCRR < SC < OSEM: the maximal error was 45.3%. The trend of differences between measured and true SUR values was similar to that of SBR; maximal error was 65%. The ACSCRR-corrected SUR, which was closer to the true value, was underestimated by 30.4%. However, the ACSCRRP-corrected SUR was underestimated by a maximum of 22.5%. The SUR in the ACSCRRPV was underestimated by 6.2%. The accuracy of quantitation was improved using various types of compensation and correction. Accuracy improved more for the SUR when PVC and ventricle correction were added.
Asunto(s)
Imagenología Tridimensional , Neostriado/diagnóstico por imagen , Fantasmas de Imagen , Tomografía Computarizada de Emisión de Fotón Único/instrumentación , TropanosRESUMEN
The objective of this study was to develop a personal computer-based nuclear medicine data processor for education and research in the field of nuclear medicine. We call this software package "Prominence Processor" (PP). Windows of Microsoft Corporation was used as the operating system of this PP, which have 1024 × 768 image resolution and various 63 applications classified into 6 groups. The accuracy was examined for a lot of applications of the PP. For example, in the FBP reconstruction application, there was visually no difference in the image quality as a result of comparing two SPECT images obtained from the PP and GMS-5500A (Toshiba). Moreover, Normalized MSE between both images showed 0.0003. Therefore the high processing accuracy of the FBP reconstruction application was proven as well as other applications. The PP can be used in an arbitrary place if the software package is installed in note PC. Therefore the PP is used to lecture and to practice on an educational site and used for the purpose of the research of the radiological technologist on a clinical site etc. widely now.
Asunto(s)
Medicina Nuclear , Programas Informáticos , Microcomputadores , Medicina Nuclear/educación , Fantasmas de Imagen , Investigación , Tomografía Computarizada de Emisión de Fotón ÚnicoRESUMEN
OBJECTIVE: Segmentation with scatter and photopeak window data using attenuation correction (SSPAC) method can provide a patient-specific non-uniform attenuation coefficient map only by using photopeak and scatter images without X-ray computed tomography (CT). The purpose of this study is to evaluate the performance of attenuation correction (AC) by the SSPAC method on normal myocardial perfusion database. METHODS: A total of 32 sets of exercise-rest myocardial images with Tc-99 m-sestamibi were acquired in both photopeak (140 keV +/- 10%) and scatter (7% of lower side of the photopeak window) energy windows. Myocardial perfusion databases by the SSPAC method and non-AC (NC) were created from 15 female and 17 male subjects with low likelihood of cardiac disease using quantitative perfusion SPECT software. Segmental myocardial counts of a 17-segment model from these databases were compared on the basis of paired t test. RESULTS: AC average myocardial perfusion count was significantly higher than that in NC in the septal and inferior regions (P < 0.02). On the contrary, AC average count was significantly lower in the anterolateral and apical regions (P < 0.01). Coefficient variation of the AC count in the mid, apical and apex regions was lower than that of NC. CONCLUSIONS: The SSPAC method can improve average myocardial perfusion uptake in the septal and inferior regions and provide uniform distribution of myocardial perfusion. The SSPAC method could be a practical method of attenuation correction without X-ray CT.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Imagen de Perfusión Miocárdica/métodos , Tomografía Computarizada de Emisión de Fotón Único/métodos , Adulto , Anciano , Anciano de 80 o más Años , Análisis de Varianza , Bases de Datos Factuales , Femenino , Humanos , Masculino , Persona de Mediana Edad , Factores Sexuales , Función Ventricular IzquierdaRESUMEN
Single photon emission computed tomography (SPECT) is widely used for Nuclear Medicine. The low spatial resolution is mainly due to the limited collimator resolution. We have developed ordered subsets-expectation maximization (OS-EM) algorithm incorporating three dimensional spatial resolution correction (3D-SRC;horizontal and vertical direction) for distance-dependent blurring. In this paper we evaluate the fundamental properties of OS-EM algorithm including distance-dependent resolution correction using some phantoms (cubic phantom, cardiac and brain phantoms) and 12 patients performed 99mTc-tetrofosmin myocardial SPECT. In cubic phantom, the resolution in transaxial, coronal and sagital images are significantly improved by 3D-SRC. In short axial images of cardiac phantom, 3D-SRC shows more excellent images than no correction. In brain phantom, the blurring at the edge of the brain structure is improved by using OS-EM algorithm with 3D-SRC. In patients, the resolution in transaxial and short axial images is significant improved. These results suggest that this method improves the resolution in SPECT images and 3D-SRC is especially available in SPECT images of other axes in addition to transaxis. This method has advantage that both reconstruction and resolution correction are simultaneously performed. In the near future, we think that OS-EM algorithm incorporating attenuation, scatter and resolution correction will be used for quantitative SPECT images.