Fractional quantum anomalous Hall effect in multilayer graphene.

The fractional quantum anomalous Hall effect (FQAHE), the analogue of the fractional quantum Hall effect1 at zero magnetic field, is predicted to exist in topological flat bands under spontaneous time-reversal-symmetry breaking2-6. The demonstration of FQAHE could lead to non-Abelian anyons that form the basis of topological quantum computation7-9. So far, FQAHE has been observed only in twisted MoTe2 at a moiré filling factor v > 1/2 (refs. 10-13). Graphene-based moiré superlattices are believed to host FQAHE with the potential advantage of superior material quality and higher electron mobility. Here we report the observation of integer and fractional QAH effects in a rhombohedral pentalayer graphene-hBN moiré superlattice. At zero magnetic field, we observed plateaus of quantized Hall resistance [Formula: see text] at v = 1, 2/3, 3/5, 4/7, 4/9, 3/7 and 2/5 of the moiré superlattice, respectively, accompanied by clear dips in the longitudinal resistance Rxx. Rxy equals [Formula: see text] at v = 1/2 and varies linearly with v, similar to the composite Fermi liquid in the half-filled lowest Landau level at high magnetic fields14-16. By tuning the gate-displacement field D and v, we observed phase transitions from composite Fermi liquid and FQAH states to other correlated electron states. Our system provides an ideal platform for exploring charge fractionalization and (non-Abelian) anyonic braiding at zero magnetic field7-9,17-19, especially considering a lateral junction between FQAHE and superconducting regions in the same device20-22.

A Laboratory Experimental Study on Enhancing the Oil Recovery Mechanisms of Polymeric Surfactants.

In order to evaluate the physical and chemical properties of polymer surfactants and analyze their oil displacement mechanisms, three types of poly-surfactant used in the Daqing oil field were chosen to be researched, and the oil displacement effects were studied using poly-surfactants of different viscosity, dehydrating rate, and core permeability. The main purpose is to determine the reasonable range of different characteristic indexes of polymeric surfactant flooding. The oil displacement effect of 15 cores was analyzed, and the effects of viscosity, the dehydrating rate of emulsion, and permeability on EOR (Enhanced Oil Recovery) were analyzed. The oil displacement mechanisms of polymeric surfactants were researched using a photolithographic glass core. This paper explores the mechanism underlying production enhancement as an EOR target, while simultaneously conducting laboratory tests to assess the physical and chemical properties of polymeric surfactants. The poly-surfactant agents exhibit a notable increase in viscosity, with the optimal displacement effect observed at a core effective permeability exceeding 400 mD, resulting in a potential EOR of 15% or higher. Moreover, at a viscosity ranging between 40 and 70 mPa·s, the total EOR can reach 73%, with the peak efficiency occurring at a viscosity of 60 mPa·s. The water loss rate of the emulsion, ranging between 30% and 70%, achieves optimal performance at 50%. The poly-surfactants' higher viscosity extends the oil sweep area, enhancing recovery efficiency, and noticeably reducing residual oil compared to water flooding. During poly-surfactant flooding, a substantial amount of residual oil is extracted and transformed into droplets. The rapid emulsification of the polymeric surfactant solution with crude oil forms a stable emulsion, contributing to its significant oil recovery effect. This research provides valuable technical support for EOR in thin and low-quality reservoirs of onshore multi-layered sandstone reservoirs.

Synthesis of Alkene Atropisomers with Multiple Stereogenic Elements via Catalytic Asymmetric Rearrangement of 3-Indolylmethanols.

Catalytic enantioselective preparation of alkene atropisomers with multiple stereogenic elements and discovery of their applications have become significant but challenging issues in the scientific community due to the unique structures of this class of atropisomers. We herein report the first catalytic atroposelective preparation of cyclopentenyl[b]indoles, a new kind of alkene atropisomers, with stereogenic point and axial chirality via an unusual rearrangement reaction of 3-indolylmethanols under asymmetric organocatalysis. Notably, this novel type of alkene atropisomers have promising applications in developing chiral ligands or organocatalysts, discovering antitumor drug candidates and fluorescence imaging materials. Moreover, the theoretical calculations have elucidated the possible reaction mechanism and the non-covalent interactions to control the enantioselectivity. This approach offers a new synthetic strategy for alkene atropisomers with multiple stereogenic elements, and represents the first catalytic enantioselective rearrangement reaction of 3-indolylmethanols, which will advance the chemistry of atropisomers and chiral indole chemistry.

Isolation and characterization of Indigenous Bacilli strains from an oil refinery wastewater with potential applications for phenol/cresol bioremediation.

Phenolic compounds are frequently occurring in wastewaters from various industrial processes at high concentrations, imposing prominent risk to aquatic biosphere and human health. Bioremediation has been proven to be an effective approach to remove these compounds, and hunting for functional organisms is still of primary importance to develop efficient processes. In this study, we report several newly isolated bacillus strains with superior performances in metabolizing phenols, one of which showed paramount efficiencies to metabolize phenol at concentrations up to 1200 mg L-1 and could simultaneously degrade a wide range of other phenolic compounds. The genes encoding for phenol hydroxylase (PH) and catechol-2,3-dioxygenase (C23O) have been detected and characterized, evidencing that phenol degradation occurs via the meta pathway. The GC level of the PH gene was found to be much higher than that of genes from other Bacilli but was quite close to that of the genes from Rhodococcus, and the induction of both enzymes by phenols was confirmed by RT-PCR experiments. We intend to believe this novel strain might be promising to serve as preferred organisms for developing more robust and efficient bioremediation processes of degrading phenolic compounds due to its validated performance.

Accurate Measurement of the Gap of Graphene/h-BN Moiré Superlattice through Photocurrent Spectroscopy.

Monolayer graphene aligned with hexagonal boron nitride (h-BN) develops a gap at the charge neutrality point (CNP). This gap has previously been extensively studied by electrical transport through thermal activation measurements. Here, we report the determination of the gap size at the CNP of graphene/h-BN superlattice through photocurrent spectroscopy study. We demonstrate two distinct measurement approaches to extract the gap size. A maximum of ∼14 meV gap is observed for devices with a twist angle of less than 1°. This value is significantly smaller than that obtained from thermal activation measurements, yet larger than the theoretically predicted single-particle gap. Our results suggest that lattice relaxation and moderate electron-electron interaction effects may enhance the CNP gap in graphene/h-BN superlattice.

Exploring the feasibility of sewage treatment by algal-bacterial consortia.

Current biological wastewater treatment is energy intensive. The application of algal-bacterial consortia to treat wastewater has recently attracted considerable attention because mechanical aeration is unnecessary. Therefore, algal-bacterial bioreactors are emerging as alternatives to activated sludge-based bioprocesses. Most studies have used a plate substratum to support the growth of algal-bacterial biofilms, which results in low reactor efficiencies. Usually, 2-10 days are required for targeted pollutant removal effects. Substratum structures can significantly influence reactor efficiencies. Indeed, substratum-free biofilms (granules) generally achieve high reactor efficiencies that rapidly form. 7-12 h are sufficient for a high-level pollutant removal efficiency. However, granule stability must be validated during long-term experiments (>1 year) involving real wastewater. In addition, the application of algal-bacterial membrane bioreactors represents a novel treatment approach. In membrane bioreactors, good reactor efficiencies and stabilities can be achieved. However, the maximum capacity of algal-bacterial membrane bioreactors requires further investigation. In addition, an accurate model for pollutant removal kinetics in algal-bacterial reactors is not yet available but is necessary for reactor control and up-scaling. The microbial and physical structures of algal-bacterial biofilms require more studies to clarify the system. Finally, the operational costs of algal-bacterial systems must be kept low in order to enhance their potential for sewage treatment at large scales. Good illumination control and recycling biomass for biodiesel or methane production could be applied to reducing the operation cost.

Evaluating the effects of micro-zones of granular sludge on one-stage partial nitritation-anammox nitrogen removal.

The one-stage partial nitritation-anammox (PN-A) process is considered an efficient process for low-cost nitrogen removal. In this study, the nitrogen removal performance of different-sized granules in a one-stage PN-A reactor was studied. The total autotrophic nitrogen removal rate (TANRR) of the granular sludge increased as the granule size increased, and the TANRR of granular sludge with a radius larger than 500 µm reached 0.14 kgN kgVSS-1 d-1. High-throughput sequencing revealed that the abundance of ammonium-oxidizing bacteria and anaerobic ammonium-oxidizing (anammox) bacteria in granular sludge of different sizes differed, indicating that the bacterial community structure was affected by the granule size. The TANRR of different-sized granules was affected by the volumes of aerobic micro-zone and anaerobic micro-zone inside the granule. Appropriate micro-zone volumes inside the granules could be regulated by the dissolved oxygen (DO) concentration of the reactor, which are favourable for achieving a balance between partial nitritation and anammox and then satisfactory nitrogen removal. Small-volume variations in the range of micro-zones have a significant influence on the balance between partial nitritation and anammox. The proper DO concentration required for different-sized granules to achieve better nitrogen removal differed. This study provides a novel perspective for understanding the effect of micro-zones of granular sludge on one-stage PN-A nitrogen removal.

Significant N2O emission from a high rate granular reactor for completely autotrophic nitrogen removal over nitrite.

Expanded granular sludge bed (EGSB) reactors were rarely applied for complete ammonium removal over nitrite. In this study, a high ammonium loading rate of 3677 mg N/L/d was achieved in an EGSB reactor. Approximately 5.5-8.5% of influent ammonium was converted to nitrous oxide (N2O) that is a potent greenhouse gas. Moreover, the percentage increased linearly with the increase in ammonium load. A model well matched the reactor dynamics. The model indicated that hydroxylamine (NH2OH) oxidation contributed to over 40% of produced N2O, and denitrification by ammonium oxidizing bacteria contributed to N2O emission significantly. Furthermore, the model suggests that a low oxygen concentration can result in a low N2O emission at the cost of a slightly low ammonium removal rate while influent organic matter play a minor role in reducing N2O emission. This study shows that EGSB reactors are effective in ammonium removal. In addition, the emission of N2O is significant.

Underlying mechanisms of ANAMMOX bacteria adaptation to salinity stress.

Dealing with nitrogen-rich saline wastewater produced by industries remains challenging because of the inhibition of functional microorganisms by high salinity. The underlying mechanisms of anaerobic ammonium-oxidizing bacteria (AnAOB) exposed to salinity stress should be studied to investigate the potential of anaerobic ammonium oxidation (ANAMMOX) for applications in such wastewater. In this study, the total DNA from granular sludge was extracted from an expanded granular sludge bed (EGSB) reactor operated at 0, 15 and 30 g/L salinity and subjected to high-throughput sequencing. The nitrogen removal performance in the reactor could be maintained from 86.2 to 88.0% at less than 30 g/L salinity level. The microbial diversity in the reactor under saline conditions was lower than that under the salt-free condition. Three genera of AnAOB were detected in the reactor, and Candidatus Kuenenia was the most abundant. The predictive functional profiling based on the Clusters of Orthologous Groups of proteins (COGs) database showed that the inhibition of AnAOB under saline conditions was mainly characterised by the weakening of energy metabolism and intracellular repair. AnAOB might adapt to salinity stress by increasing their rigidity and intracellular osmotic pressure. The predictive functional profiling based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway database revealed that the inhibition of AnAOB was mainly manifested by the weakening of intracellular carbohydrate and lipid metabolism, the blockage of intracellular energy supply and the reduction of membrane transport capacity. AnAOB might adapt to salinity stress by strengthening wall/membrane synthesis, essential cofactors (porphyrins) and energy productivity, enhancing intracellular material transformation and gene repair and changing its structure and group behaviour. The stability of the nitrogen removal performance could be maintained via the adaptation of AnAOB to salinity and their increased abundance.

Application of cadmium-doped ZnO for the solar photocatalytic degradation of phenol.

In this study, photocatalysis of phenol was studied using Cd-ZnO nanorods, which were synthesized by a hydrothermal method. The Cd-ZnO photocatalyst was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy, and Fourier transform infrared (FT-IR) and UV-Vis spectroscopy. XRD patterns exhibit diffraction peaks indexed to the hexagonal wurtzite structures with the P63mc space group. SEM images showed that the average size of the Cd-ZnO nanorods was about 90 nm. Moreover, the nanorods were not agglomerated and were well-dispersed in the aqueous medium. FT-IR analysis confirmed that a surface modifier (n-butylamine) did not add any functional groups onto the Cd-ZnO nanorods. The dopant used in this study showed reduction of the bandgap energy between valence and conduction of the photocatalyst. In addition, effect of various operational parameters including type of photocatalyst, pH, initial concentration of phenol, amount of photocatalyst, and irradiation time on the photocatalytic degradation of phenol has been investigated. The highest phenol removal was achieved using 1% Cd-ZnO for 20 mg/l phenol at pH 7, 3 g/l photocatalyst, 120 min contact time, and 0.01 mole H2O2.

Zinc Coordinated Cationic Polymers Break Up the Paradox between Low Molecular Weight and High Transfection Efficacy.

Cationic polymers have emerged as appealing nonviral gene vectors for decades, which, however, suffer from the paradox between low molecular weight and high transfection efficacy. Low molecular weight cationic polymers (LCPs) are well cell tolerated but are perplexed by orders-of-magnitude less efficacy compared to their macromolecular counterparts. The deficiency mainly lies in weak DNA binding of polymers and difficulty in endosomal escape of formulated polyplexes. Herein, we demonstrate that, through zinc (Zn) coordinated modification of LCPs, the high transfection efficiency and low molecular weight (thus low cytotoxicity) can be achieved simultaneously. The Zn coordinated ligand shows a high affinity to phosphate components and therefore will largely benefit the DNA packaging and endosomal membrane destabilization, addressing the defects of LCPs in gene delivery. Zn coordinative functionalization of LCPs breaks up the "efficacy-toxicity" paradox and provides great promise for the development of clinically efficient and safe nonviral gene vectors.

Bioreducible Zinc(II)-Coordinative Polyethylenimine with Low Molecular Weight for Robust Gene Delivery of Primary and Stem Cells.

To transform common low-molecular-weight (LMW) cationic polymers, such as polyethylenimine (PEI), to highly efficient gene vectors would be of great significance but remains challenging. Because LMW cationic polymers perform far less efficiently than their high-molecular-weight counterparts, mainly due to weaker nucleic acid encapsulation, herein we report the design and synthesis of a dipicolylamine-based disulfide-containing zinc(II) coordinative module (Zn-DDAC), which is used to functionalize LMW PEI (Mw ≈ 1800 Da) to give a non-viral vector (Zn-PD) with high efficiency and safety in primary and stem cells. Given its high phosphate binding affinity, Zn-DDAC can significantly promote the DNA packaging functionality of PEI1.8k and improve the cellular uptake of formulated polyplexes, which is particularly critical for hard-to-transfect cell types. Furthermore, Zn-PD polymer can be cleaved by glutathione in cytoplasm to facilitate DNA release post internalization and diminish the cytotoxicity. Consequently, the optimal Zn-PD mediates 1-2 orders of magnitude higher gluciferase activity than commercial transfection reagents, Xfect and PEI25k, across diverse cell types, including primary and stem cells. Our findings provide a valuable insight into the exploitation of LMW cationic polymers for gene delivery and demonstrate great promise for the development of next-generation non-viral vectors for clinically viable gene therapy.

Performance of an anaerobic membrane bioreactor in which granular sludge and dynamic filtration are integrated.

To alleviate the fouling of a filter, simple substrates, dynamic filtration, and granular sludge were applied in an anaerobic membrane bioreactor (AnMBR). The results showed that under a transmembrane pressure < 20 kPa, the filter flux ranged between 15 and 20 l (m-2 h)-1 for a period of 30 days. The flux was higher than the typical flux of AnMBRs with conventional membranes and most current dynamic filters. In addition, the low cost of the filter avoided the need for a higher flux. Moreover, a stable granular sludge bed, which consumed all volatile fatty acids, was maintained. A compact fouling/filtration layer formed on the filter, which contributed to low effluent chemical oxygen demand concentrations and turbidity. In addition, substrate scarcity in the filtration zone resulted in the evolution of diverse bacteria on the filter.

Performance of one-stage autotrophic nitrogen removal in a biofilm reactor with low C/N ratio.

Wastewater with C/N ratios ranging from 1.00 to 0.33 caused by a gradual increase in influent NH4+-N concentration was used to evaluate the performance of the one-stage nitrogen removal process in a biofilm reactor. The system was operated for 197 days under chemical oxygen demand (COD) concentration of 250 mg L(-1) and influent NH4+-N concentrations ranging from 250 to 750 mg L(-1). The effects of the C/N ratio and dissolved oxygen (DO) on nitrogen removal were evaluated at different influent C/N ratios and DO concentrations, respectively. The microbial composition of the system was examined by scanning electron microscopy and polymerase chain reaction-denaturing gradient gel electrophoresis, and the relative contribution of anaerobic ammonium oxidation (ANAMMOX) to nitrogen removal was assessed by calculating the average rates of ANAMMOX and denitrification in batch experiments. Results showed that the removal efficiencies of total nitrogen (TN), NH4+-N and COD were 74-97%, 75-99% and 64-97%, respectively. The C/N ratio had a significant influence on nitrogen removal efficiency when it was decreased from 1.00 to 0.70, but no significant change was observed when it was reduced from 0.70 to 0.33. DO also correlated with the NH4+-N concentration in the influent, and 3.0 mg L(-1) was found to be a suitable concentration for the influent NH4+-N concentration of 450±5 mg L(-1). Analysis of microbial composition of the system revealed that biofilm and activated sludge were mainly composed of aerobic ammonium-oxidizing bacteria, anaerobic ammonium-oxidizing bacteria (AnAOB) and denitrifying bacteria. Activity tests suggested that AnAOB played an important role in the one-stage autotrophic nitrogen removal process, contributing to about 52.7% of total TN removal via ANAMMOX.

Feasibility of using NaCl to reduce membrane fouling in anaerobic membrane bioreactors.

The objective of this research study is to assess the feasibility of naturally occurring Na+ ions in wastewater as a possible coagulant to control the fouling of AnMBR under high salinity conditions. A multi-bladed stirrer was installed in the reactor, which aimed at providing a good mixing condition for inducing coagulation. The rotation speed of the stirrer was set at 30 rpm for achieving the coagulation effect. A sludge was cultured in a saline environment with sodium concentration as high as 13 g/L. It was observed that, the applied conditions could not provide a high saline sludge with a good filterability. In addition, results of Fourier transform infrared spectroscopy showed that the functional groups of the cake layer formed by the saline sludge was similar to that of non-saline sludge, therefore, the high salinity should promote the formation of a gel layer.

Lightweight tomato ripeness detection algorithm based on the improved RT-DETR.

Tomatoes, widely cherished for their high nutritional value, necessitate precise ripeness identification and selective harvesting of mature fruits to significantly enhance the efficiency and economic benefits of tomato harvesting management. Previous studies on intelligent harvesting often focused solely on identifying tomatoes as the target, lacking fine-grained detection of tomato ripeness. This deficiency leads to the inadvertent harvesting of immature and rotten fruits, resulting in economic losses. Moreover, in natural settings, uneven illumination, occlusion by leaves, and fruit overlap hinder the precise assessment of tomato ripeness by robotic systems. Simultaneously, the demand for high accuracy and rapid response in tomato ripeness detection is compounded by the need for making the model lightweight to mitigate hardware costs. This study proposes a lightweight model named PDSI-RTDETR to address these challenges. Initially, the PConv_Block module, integrating partial convolution with residual blocks, replaces the Basic_Block structure in the legacy backbone to alleviate computing load and enhance feature extraction efficiency. Subsequently, a deformable attention module is amalgamated with intra-scale feature interaction structure, bolstering the capability to extract detailed features for fine-grained classification. Additionally, the proposed slimneck-SSFF feature fusion structure, merging the Scale Sequence Feature Fusion framework with a slim-neck design utilizing GSConv and VoVGSCSP modules, aims to reduce volume of computation and inference latency. Lastly, by amalgamating Inner-IoU with EIoU to formulate Inner-EIoU, replacing the original GIoU to expedite convergence while utilizing auxiliary frames enhances small object detection capabilities. Comprehensive assessments validate that the PDSI-RTDETR model achieves an average precision mAP50 of 86.8%, marking a 3.9% enhancement over the original RT-DETR model, and a 38.7% increase in FPS. Furthermore, the GFLOPs of PDSI-RTDETR have been diminished by 17.6%. Surpassing the baseline RT-DETR and other prevalent methods regarding precision and speed, it unveils its considerable potential for detecting tomato ripeness. When applied to intelligent harvesting robots in the future, this approach can improve the quality of tomato harvesting by reducing the collection of immature and spoiled fruits.

Large quantum anomalous Hall effect in spin-orbit proximitized rhombohedral graphene.

The quantum anomalous Hall effect (QAHE) is a robust topological phenomenon that features quantized Hall resistance at zero magnetic field. We report the QAHE in a rhombohedral pentalayer graphene-monolayer tungsten disulfide (WS2) heterostructure. Distinct from other experimentally confirmed QAHE systems, this system has neither magnetic element nor moiré superlattice effect. The QAH states emerge at charge neutrality and feature Chern numbers C = ±5 at temperatures of up to about 1.5 kelvin. This large QAHE arises from the synergy of the electron correlation in intrinsic flat bands of pentalayer graphene, the gate-tuning effect, and the proximity-induced Ising spin-orbit coupling. Our experiment demonstrates the potential of crystalline two-dimensional materials for intertwined electron correlation and band topology physics and may enable a route for engineering chiral Majorana edge states.

Prussian blue analogue-derived Co3O4/Fe2O3 with a partially hollow and octahedral structure for high-performance supercapacitors.

A supercapacitor (SC) is considered as a promising energy storage device because of its high power density, fast charging/discharging speed and long cycle life. The transition metal oxides prepared by traditional methods face some challenges, such as low conductivity and uncontrollable pore size distribution. Therefore, we have prepared Prussian blue analogues (PBAs) using a coprecipitation method. By adjusting additives in the experimental process, uniform PBAs with a series of regular morphologies and structures are successfully prepared. Then the corresponding metal oxides are obtained by calcining precursors. We systematically study the influence of the morphology and structure of metal oxides Co3O4/Fe2O3 derived from PBAs on their electrochemical performance. The metal oxide with a partially hollow and octahedral structure shows excellent electrochemical performance. In a neutral electrolyte, the specific capacitance is 659.7 F g-1 at a current density of 0.5 A g-1. After 6000 cycles, the capacitance retention rate is 63.7%. An asymmetric supercapacitor (ASC) is constructed using Co3O4/Fe2O3 with an octahedral structure (CFMO-PVP-2) as the positive electrode and YP-50F as the negative electrode. The maximum energy density is 31.4 W h kg-1 at a power density of 1921 W kg-1. The maximum power density is 8421 W kg-1 at an energy density of 23.5 W h kg-1. The excellent electrochemical performance is attributed to the low resistance (Rw and Rct) and high DOH- derived from the oxide particles on the surface and within the inner parts of the octahedron, which are available for electron transport. Meanwhile, the open void between adjacent nanoparticles allows the electrolyte ions to diffuse more efficiently and ensures a much more effective area for participating in a reaction. The strategy will give new insights into designing high-performance SCs based on PBAs.

Weizmannia coagulans BCF-01: a novel gastrogenic probiotic for Helicobacter pylori infection control.

The widespread prevalence of Helicobacter pylori infection, particularly in China, contributes to the development of gastrointestinal diseases. Antibiotics have limitations, including adverse reactions and increased antibiotic resistance. Therefore, identification of novel gastrogenic probiotics capable of surviving the acidic gastric environment and effectively combating H. pylori infection has potential in restoring gastric microbiota homeostasis. Five novel strains of human gastrogenic Weizmannia coagulans (BCF-01-05) were isolated from healthy gastric mucosa and characterized using 16S rDNA identification. Acid resistance, H. pylori inhibition, and adherence to gastric epithelial cells were evaluated in in-vitro experiments and the molecular mechanism explored in in-vivo experiments. Among the gastric-derived W. coagulans strains, BCF-01 exhibited the strongest adhesion and H. pylori inhibition, warranting further in-vivo safety evaluation. Through 16S rRNA sequencing of a mouse model, BCF-01 was determined to significantly restore H. pylori-associated gastric dysbiosis and increase the abundance of potential probiotic bacteria. Furthermore, BCF-01 enhanced mucosal tight junction protein expression and inhibited the TLR4-NFκB-pyroptosis signaling pathway in macrophages, as demonstrated by qRT-PCR and western blotting.These findings highlight the potential of BCF-01 in the prevention and control of H. pylori infection. Specifically, treatment with BCF-01 effectively restored gastric microecology and improved H. pylori-mediated mucosal barrier destruction while reducing inflammation through inhibition of the TLR4-NFκB-pyroptosis signaling pathway in macrophages. BCF-01 is a promising alternative to traditional triple therapy for H. pylori infections, offering minimal side effects with high suitability for high-risk individuals.

A four parallel laser-based simultaneous measurement method for 6-degrees-of-freedom errors of rigid body with translational motion.

The measurement of six-degrees-of-freedom (6-DOF) errors of rigid bodies can show the real and accurate spatial pose of those rigid bodies. It plays a major role in precision calibration, spacecraft docking, machining, assembly, etc. In this paper, a four parallel laser-based simultaneous measurement (FPL-SM) method is proposed for measuring 6-DOF errors of rigid bodies with translational motion. First, a FPL-SM device is introduced. Its four laser heads form a rectangle, which is perpendicular to the movement direction of the measured linear displacement. Second, identification formulas for all geometrical errors in rigid bodies with translational motion are presented based on the relative positions of the four lasers. Based on the readings of the four lasers, angular errors and corresponding straightness errors are calculated for the direction of motion around the other two linear motions. As the two parallel sides of the rectangle are in different planes, the straightness errors of the two planes are different. The rolling angular error in the direction is expressed as the difference between the straightness errors of the two planes divided by the distance between the two planes. Six fundamental errors for rigid bodies with translational motion are obtained by four lasers in a single setting of the device. For multiple rigid bodies with mutually perpendicular translational motion, the squareness error is calculated by fitting to the actual direction of motion. Finally, experiments were carried out on the SmartCNC_DRDT five-axis machine tool and 21 geometric errors were determined for three translational axes. Error compensation was carried out using the generated machine tool geometric error data to verify the effectiveness of the proposed FPL-SM method. In addition, geometric errors and thermal errors of the Z axis of the GTI-2740 machine tool are measured based on the FPL-SM method.