RESUMEN
A novel cathodic-anodic-electrolysis packing (CAEP) used in the treatment of pyridine wastewater was researched, which mainly consisted of 4,4'-diamino-2,2'-disulfonic acid (DSD acid) industrial iron sludge. The physical properties and morphology of the packing were studied. The CAEP was used in a column reactor during the pretreatment of pyridine wastewater. The influence of pH, hydraulic retention time (HRT), the air-liquid ratio (A/L) and the initial concentration of pyridine were investigated by measuring the removal of total organic carbon (TOC) and pyridine. The characterization results showed that the bulk density, grain density, water absorption percentage and specific surface area were 921kg/m3, 1086kg/m3, 25% and 29.89m2/g, respectively; the removal of TOC and pyridine could reach 50% and 58% at the optimal experimental conditions (pH=3, HRT=8hr, A/L=2). Notably, the surface of the packing was renewed constantly during the running of the filter, and the handling capacity was stable after running for three months.
Asunto(s)
Electrólisis , Piridinas/química , Eliminación de Residuos Líquidos/métodos , Aguas Residuales/química , Contaminantes Químicos del Agua/química , Técnicas Electroquímicas , Electrodos , Contaminantes Químicos del Agua/análisisRESUMEN
Hexagonal manganites, as a functional ferroelectric (FE) material, receive considerable attention due to their improper ferroelectricity and topological vortex structures. This family exhibits three low-symmetry states accompanied by distinct vortex domain structures. In addition to the FEP63cmand anti-FE (AFE)P-3c1 states accompanied by dual six-fold vortex structures, there is another FEP3c1 state accompanied by a twelve-fold vortex structure. The responses of FE materials to external stimuli, such as external electric fields, are the core ingredients in the physics of FEs and are significant for technological applications. Under external electric fields, the responses of FE materials are determined by special FE domain structures. The electric properties of the FEP63cmand AFEP-3c1 states are very different. However, the electric properties of the FEP3c1 state, which only stabilizes in Ga-substituted In(Mn, Ga)O3, are unclear. The present work studies the electric properties of the FEP3c1 state. The electric-field-driven transition of the FEP3c1 state is found to follow two sequences, i.e. (1) twelve-foldP3c1 â nine-foldP3c1 +P63cmâ three-foldP63cm, and (2) twelve-foldP3c1 â six-foldP3c1 â three-foldP63cm. The variation of average polarization withEfor the FEP3c1 state with the second transition sequence manifests as an unusual triple-hysteresis loop, different from the usual single-hysteresis loop of FE materials. The results are related to the coexistence of the FE and non-FE domain walls in the FEP3c1 state. Furthermore, it is found that the FEP3c1 state at substitution concentration 0.39 exhibits the highest dielectric response. The results advance our understanding of topological vortex structures in hexagonal manganites.
RESUMEN
This study explored the feasibility of calcium peroxide (CaO2) to inhibit cyanobacterial blooms of the outbreak and dormancy stages. Our previous studies have found that CaO2 has a high inhibitory effect on cyanobacteria. In order to explore the application effect of CaO2 in actual cyanobacteria lake water, we conducted this study to clarify the effect of CaO2 on inhibiting cyanobacteria in outbreak and dormancy stages. The results showed that CaO2 inhibited the growth of cyanobacteria in the outbreak and dormancy stages by 98.7% and 97.6%, respectively. The main inhibitory mechanism is: (1) destroy the cell structure and make the cells undergo programmed cell death by stimulating the oxidation balance of cyanobacteria cells; (2) EPS released by cyanobacteria resist stimulation and combine calcium to form colonies, and accelerate cell settlement. In addition to causing direct damage to cyanobacteria, CaO2 can also improve water quality and sediment microbial diversity, and reduce the release of sediment to phosphorus, so as to further contribute to cyanobacterial inhibition. Finally, the results of qRT-PCR analysis confirmed the promoting effect of CaO2 on the downregulation of photosynthesis-related genes (rbcL and psaB), microcystn (mcyA and mcyD) and peroxiredoxin (prx), and verified the mechanism of CaO2 inhibition of cyanobacteria. In conclusion, this study provides new findings for the future suppression of cyanobacterial bloom, by combining water quality, cyanobacterial inhibition mechanisms, and sediment microbial diversity.
Asunto(s)
Cianobacterias , Microbiota , Calidad del Agua , Lagos/microbiología , Fósforo/farmacología , Fósforo/análisis , EutrofizaciónRESUMEN
Dissolved organic matter (DOM) is reported to be a precursor to disinfection by-products (DBPs), which have adverse effects on human health. Therefore, it is crucial to effectively remove DOM before water disinfection. Characteristics of DOM and DBPs formation during advanced treatment processes including coagulation, adsorption, ultraviolet (UV) irradiation, and ozone (O3) oxidation in municipal secondary effluent were investigated in this research. DOM was characterized by Fourier transform infrared spectroscopy (FTIR), excitation-emission matrix fluorescence spectroscopy (EEM), and Orbitrap mass spectrometry (Orbitrap MS). Moreover, DBPs formation potential under different advanced treatment processes was also discussed. FTIR results indicated that various functional groups existing in DOM may react with the disinfectant to form toxic DBPs. EEM analysis indicated that DOM in all water samples was dominated by soluble microbial product-like (SMPs) and humic acid-like (HA) substances. The municipal secondary effluent was abundant with DOM and rich in carbon, hydrogen, oxygen, and nitrogen atoms, contained a certain dosage of phosphorus and sulfur atoms, and the highest proportion is lignin. Most of the precursors (CHO features) had positive double bond equivalent subtracted oxygen per carbon [(DBE-O)/C] and negative carbon oxidation state (Cos) in all four different advanced treatment processes. DBPs formation potential (DBPFP) of coagulation, adsorption, UV irradiation, and O3 oxidation advanced treatment processes were 487 µg L-1, 586 µg L-1, 597 µg L-1, and 308 µg L-1, respectively. And the DBPs precursors removal efficiency of coagulation, adsorption, UV irradiation, and O3 oxidation advanced treatment processes were 50.8%, 40.8%, 39.8%, and 69.0%, respectively. This study provides in-depth insights into the changes of DOM in municipal secondary effluent at the molecular level and the removal efficiency of DBPs precursors during coagulation, adsorption, UV irradiation, and O3 oxidation advanced treatment processes.
Asunto(s)
Ozono , Contaminantes Químicos del Agua , Purificación del Agua , Humanos , Desinfección/métodos , Materia Orgánica Disuelta , Purificación del Agua/métodos , Contaminantes Químicos del Agua/análisis , Agua , Espectrometría de Masas , Ozono/análisis , CarbonoRESUMEN
The improper disposal of sludge is a still-present phenomenon in China. The leachate formed at the bottom of the sludge pile would cause toxicological effects on aquatic organisms and affect the health of humans by entering the surrounding rivers and groundwater. In this study, the hepatotoxicity of zebrafish induced by sludge leachate was assessed by antioxidant enzyme activities, semi-quantitative histopathological assessment, and TUNEL apoptosis assay. The results indicated that the leachate would induce oxidative stress and eventually lead to an increase in lipid peroxide after a 7-day exposure. The histopathological indexes demonstrated that exposure to leachate would cause histological damage by circulatory disturbances, regressive changes, progressive changes, and inflammatory responses. According to the TUNEL results, it could be inferred that apoptotic hepatocytes increased after exposure for 7 days due to oxidative stress and histological damage. Overall, this study provided a valuable approach to assessing the toxic effects of sludge leachate and described the underlying mechanism of leachate-induced hepatotoxicity in zebrafish. This work will generate new insights into the ecological toxicity of leachate and promote the development of sludge disposal in China.
Asunto(s)
Enfermedad Hepática Inducida por Sustancias y Drogas , Contaminantes Químicos del Agua , Humanos , Animales , Antioxidantes/metabolismo , Aguas del Alcantarillado , Pez Cebra/metabolismo , Apoptosis , Contaminantes Químicos del Agua/análisisRESUMEN
Microbial electrolysis cell (MEC) system to treat wastewater containing antibiotics has been researched actively in past years. However, the fate of antibiotic resistant genes (ARGs) in MEC is not fully revealed. The effect of applied voltage on the migration of ARGs between anolyte and biofilm microbes via examining the microbial physiology and abundances of macrolide resistance genes (MRGs) and mobile genetic elements (MGEs) was elucidated in this research. Results showed that the abundance of MRGs and MGEs was decreased in the anolyte, but their abundances were increased on the electrode biofilm, indicating their transmission from anolyte to biofilm microbes. Increased applied voltage enhanced adenosine triphosphate (ATP), reactive oxygen species (ROS), and cell membrane permeability of electrode microorganisms. The structure of the electrode microbial community was shifted through applied voltage, and the abundance of electroactive microorganisms (Geobacter, Azospirillum and Dechlorobacter) was significantly improved. Network analysis revealed that Geobacter and Geothrix were potential hosts for MRGs. Therefore, the horizontal and vertical gene transfer of ARGs could be increased by the applied voltage, leading to the enriched ARGs at the electrode biofilm. This study provides evidence and insights into the transmission of ARGs between anolyte and biofilm microbes in MEC system. SYNOPSIS: This study revealed the effect of applied voltage on ARGs in MEC and the potential migration mechanism of ARGs.
Asunto(s)
Antibacterianos , Genes Bacterianos , Antibacterianos/farmacología , Farmacorresistencia Bacteriana/genética , Macrólidos , ElectrólisisRESUMEN
To alleviate the problems of eutrophication and blue algae accumulation in water, biochar was prepared from blue algae dehydrated using polymerized ferrous sulfate(PFS) to absorb phosphate in water, and the biochar was activated using steam to adjust the pore structure. The preparation conditions of blue algae biochar were optimized using the response surface method. The optimal results were as follows:the dosage of PFS was 458 mg·L-1, the carbonization temperature was 433â, and the mass ratio of biochar precursor to steam was 1:11. Biochar without PFS(F0H11-433) and biochar with PFS(F458H11-433) were characterized using X-ray diffraction(XRD), Fourier-transform infrared spectroscopy(FTIR), zeta potential, and Raman spectra(Raman) were used to study whether blue algae biochar and PFS had a synergic effect on phosphate removal. The results showed that:compared with F0H11-433, iron oxide appeared on the surface, the zero point of charge(pHpzc) increased from 4.41 to 6.19, and the disorder and defect degree of biochar was increased in F458H11-433. The pseudo-second-order model and Langmuir model were suitable for describing the adsorption process of F458H11-433, and the saturated adsorption capacity was 31.97 mg·g-1. F458H11-433 had excellent phosphorus removal efficiency in actual lake water, and the residual phosphate content of effluent was less than 0.025 mg·L-1. In the presence of several common anions, it still showed excellent selective adsorption. After five cycles, the phosphate removal of F458H11-433 still reached 75.78%, indicating that F458H11-433 had the characteristic of being renewable. Combined with the material characterization results before and after adsorption, the phosphorus removal mechanism of F458H11-433 mainly involved electrostatic attraction and ligand exchange.
Asunto(s)
Fósforo , Contaminantes Químicos del Agua , Hierro , Agua , Adsorción , Vapor , Contaminantes Químicos del Agua/análisis , Fosfatos/química , Carbón Orgánico/química , Cinética , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
In order to address the low catalytic performance of magnetic CuFe2O4 caused by the agglomeration, low conductivity and potential metal ion leaching risk, N-doped reduced graphene oxide (N-rGO) with high charge density and rich active sites was employed as support to synthesize CuFe2O4@N-rGO (CuFe@NG), which was used for peroxymonosulfate (PMS) activation to degrade sulfamethoxazole (SMX). Results showed that the CuFe@NG/PMS system exhibited excellent degradation rate and mineralization efficiency on SMX in 60 min, which exceeded 93.15% and 31.96%, respectively. Besides, its degradation rate constants was 1.68 times higher than that of the CuFe2O4/PMS system. The enhanced performance could be mainly ascribed to the efficient synergistic activation of PMS by two components: I. the successful dispersion of CuFe2O4 on N-rGO and the interaction between them exposed more Fe3+-O2- and Cu2+-O2- active sites via decreasing size and aggregation of CuFe2O4 particles; II. the supported N-rGO supplied extra CO, C-OH and C-NC active groups, resulting in a large number of π electrons; III. the pyrrole N formed by further doping of N could activate the π electrons and reduce the energy barrier of electron transfer. The abundant active groups and sites and excellent electron transfer ability co-accelerate the production of active species. Specifically, surface-bound radical (â¢OH, SO4â¢-) and singlet oxygen 1O2 played a dominant role according to ESR and quenching tests. Furthermore, M-O-C binding site between two components enhanced catalyst stability and reduced metal leaching, leading to its availability on reusability in the 5 cyclic experiments. Lastly, CuFe@NG/PMS system also possessed a strong application ability in actual aquatic environment for SMX treatment.
Asunto(s)
Peróxidos , Sulfametoxazol , Peróxidos/química , Metales , Fenómenos MagnéticosRESUMEN
Antibiotics, such as azithromycin (AZ), tetracycline (TC), and their related antibiotic resistance genes (ARGs), create serious ecological risks to aquatic organisms. This study examined the response mechanisms of submerged macrophytes and periphytic biofilms to a mixture of AZ and TC pollution and determined the antibiotic removal efficiencies and fate of ARGs. The results showed that the plant-biofilm system had a significant capacity for removing both single and combined antibiotics with removal efficiencies of 93.06% â¼99.80% for AZ and 73.35% â¼97.74% for TC. Higher ARG (tetA, tetC, tetW, ermF, ermX, and ermB) abundances were observed in the biofilm, and subsequent exposure to the antibiotic mixture increased the abundances of these genes. Both single and combined antibiotics triggered antioxidant stress, but antagonistic effects were induced only with mixed AZ and TC exposure. Furthermore, the antibiotics changed the structural characteristics of extracellular polysaccharides and induced alterations in the structure of the biofilm microbial community. Increased N-acylated-l-homoserine lactone confirmed alternations in microbial quorum-sensing. The results extend the understanding of the fate of antibiotics and ARGs when aquatic plants and biofilms are exposed to antibiotic mixtures, as well as the organism's response mechanisms.
Asunto(s)
Antibacterianos , Contaminantes Químicos del Agua , Antibacterianos/toxicidad , Azitromicina/toxicidad , Contaminantes Químicos del Agua/toxicidad , Tetraciclina/análisis , Tetraciclina/química , Tetraciclina/farmacología , Biopelículas , Farmacorresistencia Microbiana/genéticaRESUMEN
A green, low-cost, high-performance Fe/N co-doped biochar material (Fe-N@C) was synthesized using salvaged cyanobacteria without other extra precursors for peroxymonosulfate (PMS) activation and ofloxacin (OFX) degradation. With the increased pyrolysis temperature, the graphitization degree, the specific surface area and the corresponding groups like OH, COO etc. for Fe-N@C tended to increase, resulting in a greater OFX adsorption. However, the total amount of Fe-NX and graphitic nitrogen groups in the Fe-N@C composites was firstly increased and then decreased, which reached the highest at 800 °C (Fe-N@C-800). All these changes of functional species ascribed to the strong interaction between Fe, N and C led to the highest defect degree of Fe-N@C-800, resulting the highest OFX removal efficiency of 95.0 %. OFX removal experiments indicated the adsorption process promoted the total OFX degradation for different functional groups on Fe-N@C composites separately dominated the process of OFX adsorption and PMS catalysis. Radical quenching and electron paramagnetic resonance (EPR) measurements proved free radical and non-free radical pathways participated in Fe-N@C/PMS system. The non-free radicals based on 1O2 and high-valent iron-oxo species played a more important role in OFX degradation, leading to the minimal effect of co-existing anions and the high universality for other antibiotic pollutants. Fe-NX was utilized as the main catalytic sites and graphitic nitrogen contributed more to the electron transfer for PMS activation, whose synergistic effect efficiently facilitated OFX degradation. Finally, the possible degradation route of OFX in the Fe-N@C-800/PMS system was proposed. All these results will provide the new insights into the intrinsic mechanism of Fe/N species in carbon-based materials for PMS activation.
Asunto(s)
Cianobacterias , Hierro , Ofloxacino , Nitrógeno , PeróxidosRESUMEN
This study explored the feasibility and mechanism of cyanobacterial blooms control by calcium peroxide (CaO2). The obtained results demonstrated a strong inhibitory effect of CaO2 on cyanobacterial growth. The removal chlorophyll-a rate reached 31.4 %, while optimal/maximal quantum yield of PSII (Fv/Fm) decreased to 50 % after CaO2 treatment at a concentration of 100 mg L-1 for 96 h. Two main mechanisms were involved in the treatment of cyanobacterial bloom with CaO2, namely oxidative damage and cyanobacterial colony formation. It was found that CaO2 released reactive oxygen species (ROS), namely hydroxyl radicals (·OH), singlet oxygen (1O2), and superoxide radicals (·O2-), inhibiting the activity of antioxidant enzymes in cyanobacterial cells and resulting in intracellular oxidation imbalance. Cyanobacteria can resist oxidative damage by releasing extracellular polymeric substances (EPS). These EPS can combine with CaO2-derived Ca, forming large cyanobacterial aggregates and, consequently, accelerating cell sedimentation. In addition, CaO2 caused programmed cell death (PCD) of cyanobacteria and irreversible damage to the ultrastructure characteristic of the cyanobacterial cells. The apoptotic rate was greatly improved at 100 mg L-1 CaO2. On the other hand, the results obtained using qRT-PCR analysis confirmed the contribution of CaO2 to the down-regulation of photosynthesis-related genes (rbcL and psaB), the up-regulation of microcystins (mcyA and mcyD), the up-regulation of the oxidation system: peroxiredoxin (prx) through oxidative mechanisms. The present study proposes a novel treatment method for water-containing cyanobacterial blooms using CaO2.
Asunto(s)
Cianobacterias , Peróxidos/química , Especies Reactivas de Oxígeno/metabolismo , Estrés Oxidativo , Peróxido de HidrógenoRESUMEN
In this study, the flat microfiltration ceramic membrane (CM) was modified by wet impregnation method (Mn-Fe-CM) to catalyze ozone (O3) for the oxidative degradation of trimethoprim (TMP). The conventional characterization test showed that the Mn-Fe binary oxides (Mn/FeOx) with the crystal structure of FeMnO3 were successfully loaded on the membrane and the catalytic performance of Mn-Fe-CM for O3 was apparently enhanced as compared to CM. Consequently, compared with O3 oxidation alone, the degradation and mineralization efficiencies of TMP in the O3/Mn-Fe-CM system were both improved and 98.6% of TMP could be removed within 10 min. The degradation efficiency of TMP decreased with the increasing pH and the addition of Cl-ãHCO3-ãPO43-, while humic acid (HA) exhibited negative effect on the TMP removal. Radical scavenger experiment and electron paramagnetic resonance (EPR) analysis confirmed that direct oxidation by O3 played an important role in the degradation of TMP, while hydroxyl radical (·OH) and 1O2 also participated. Fe(II) could act as an intermediate to transfer electrons and accelerate the transformation of Mn(III) to Mn(II) and Mn(IV) to Mn(III) during the ozonation process, which definitely strengthened the synergic catalytic effect of Mn-Fe-CM. The proposed degradation mechanism of TMP mainly contained hydroxylation, carbonylation, demethoxylation and deamination. Due to the strong catalytic ozonation performance for organic pollutants degradation, the O3/Mn-Fe-CM system revealed better anti-membrane fouling ability, strong cyclic usage performance and high applicability for the actual surface water treatment.
Asunto(s)
Incrustaciones Biológicas , Ozono , Contaminantes Químicos del Agua , Purificación del Agua , Incrustaciones Biológicas/prevención & control , Catálisis , Cerámica , Ozono/química , Trimetoprim , Contaminantes Químicos del Agua/química , Purificación del Agua/métodosRESUMEN
Cyanobacterial blooms have been a global environmental problem for decades. Bioconversion by black soldier fly larvae (BSFL) has been widely reported to be a clean and efficient method to remove organic pollutants. In this study, BSFL bioconversion was used to treat cyanobacterial blooms. Antioxidants (a mixture of l-ascorbic acid [180 mg/kg fresh feed] and α-tocopherol [360 mg/kg fresh feed]) were added to compare bioconversion performance against a non-supplemented group. With increasing proportions of cyanobacteria (0%-25% dry mass), the bioconversion efficiency of the antioxidant group improved significantly compared to the control group, and the survival rate of larvae rose from 96.50-45.50% to 98.00-55.83% with antioxidant addition. The toxic effects of exogenous anti-nutrients could be reduced by the antioxidants through inactivation of trypsin inhibitor and enhancement of the microcystin-LR degradation rate. Overall, the BSFL bioremediation capacity was improved with addition of exogenous antioxidants, verifying both the effects and mechanism of antioxidant addition in promoting the bioconversion of cyanobacteria by BSFL and providing a basis for future application and study.
Asunto(s)
Cianobacterias , Dípteros , Animales , Antioxidantes , Larva , NutrientesRESUMEN
Black soldier fly is a saprophagous insect that has been widely reported in recent years due to its excellent performance in bioremediation. Due to the widespread presence of flocculants in the organic waste treated by black soldier fly larvae, this study aimed to evaluate the potential impacts and risks of flocculant addition (a combination of poly aluminum chloride and polyacrylamide with the ratio of 50:1). Results showed that the growth and weight of BSFL in the high-exposure groups (≥200 mg/L) were inhibited. The bioaccumulation of aluminum (Al) in larvae was estimated, and the proportions of different Al forms in the frass from high to low were the residual state (41.38% to 67.92%), water-soluble state (16.88% to 37.03%), acid-soluble state (8.45% to 18.72%), and alkali-soluble state (3.38% to 5.14%). The relative abundance of bacterial genera related to lipid metabolism decreased with increasing flocculant concentrations while disease-related taxa increased in relative abundance. The results serve as a reference for subsequent research and application of the treatment of flocculant-contaminated waste by BSFL.
RESUMEN
The threshold salt concentration to inhibit the anaerobic digestion (AD) has been intensively investigated, but its insight mechanism is not fully revealed. Therefore, this study systematically investigated the effect of salinity on acidogenesis and methanogenesis and its mechanism. Results showed that low salinity level (i.e. 0.6%) had stimulatory effect on volatile fatty acids (VFA) and methane production, while significant inhibition was observed with further increased salinity. Moreover, high salinity limited the butyric acid degradation at acidogenesis process. The decreases of enzymes (AK and PTA) activity and functional genes (ackA, pta and ACOX) expression that related to ß-oxidation explained the butyric acid accumulation at high salinity levels. Microbial community analysis revealed high salinity levels significantly inhibited the proliferation of Syntrophomonas sp., which are known to be associated with butyric acid degradation. Similarly, the relative abundance of acetoclastic methanogen (Methanothrix sp.) and methylotrophic methanogen (Methanolinea sp.) significantly decreased at salinity condition.
Asunto(s)
Microbiota , Aguas Residuales , Anaerobiosis , Reactores Biológicos , Butiratos , Ácidos Grasos Volátiles , Redes y Vías Metabólicas , Metano/metabolismo , Microbiota/genética , Salinidad , Aguas del AlcantarilladoRESUMEN
Iron-manganese binary oxides (FeMnOx) can remove contaminants from aqueous solutions with high efficiency, and mesoporous silica (SBA-15) is widely used as a supporting material due to its large specific surface area and good stability. In this study, SBA-15 was used to support FeMnOx in the synthesis of a novel arsenic (As) adsorbent (FeMnOx/SBA-15), and its characteristics under different reaction conditions, such as pH, temperature, presence of competing ions, and humic acid, were tested. The results showed that the contaminant adsorption efficiency of the novel adsorbent was better than that of bare FeMnOx, as the addition of SBA-15 decreased the agglomeration effect of FeMnOx. Additionally, FeMnOx/SBA-15 underwent calcination to further enhance its performance. The state of iron and manganese in FeMnOx/SBA-15 and the corresponding arsenic removal efficiency were improved by calcination at 350⯰C with an FeMnOx/SBA-15 mass fraction of approximately 45%. Almost 90% of As (50â¯mL, 5.0â¯mgâ¯L-1) could be removed by 0.2â¯g L-1 of FeMnOx/SBA-15 (mass ratio of 45% and calcination temperature of 350⯰C). The FeMnOx/SBA-15 could regenerate and still be used after four consecutive cycles. The high As sorption capacity, ability to regenerate, and reusability of FeMnOx/SBA-15 confirmed that this adsorbent is promising for treating As-contaminated drinking water.
RESUMEN
The wide use of antimony in textile industry has posed threat to ecological health and attracted increased attention. The objective of this work was to develop enhanced coagulation strategies including PFS/FeSO4 and aerated PFS/FeSO4 for efficient antimony elimination from textile wastewater matrix. With a dosage of 0.75â¯mM Fe, aerated PFS/FeSO4 coagulation could achieve 82.6% removal of 500⯵gâ¯L-1 Sb(V) from simulated textile wastewater, which was better than PFS (77.6%) and PFS/FeSO4 coagulation (79.9%). Compared with PFS and PFS/FeSO4 coagulation, aerated PFS/FeSO4 strategy could meet the indirect discharge standard (<100⯵gâ¯L-1), without any other additional treatment. pH ranged from 5 to 6 could reach 93.8% Sb(V) removal, by affecting coagulant hydrolysis and charges on flocs. Phosphate ion with a level more than 0.03â¯mM could compete with Sb(V) species and thus reduced its removal. Temperature of 35⯰C could lead to enhanced Sb(V) removal by accelerating coagulant hydrolysis. Flocs of aerated PFS/FeSO4 had smaller average size than that of PFS and PFS/FeSO4 coagulation. FeOOH was the hydrolysis product of aerated PFS/FeSO4 strategy. Adsorption, rather than direct and co-precipitation was predominant in the coagulation mechanism. From the phosphate extraction test, 64% of the Sb could form inner-sphere surface complex during aerated PFS/FeSO4 coagulation removal.
Asunto(s)
Antimonio/análisis , Industria Textil , Eliminación de Residuos Líquidos/métodos , Aguas Residuales/química , Contaminantes Químicos del Agua/análisis , Adsorción , Fosfatos , TextilesRESUMEN
Sulfidation of nanoscale zerovalent iron (nZVI) has attracted increasing interest for improving the reactivity and selectivity of nZVI towards various contaminants, such as aqueous Cr(VI) removal. However, the benefits derived from sulfide modification that govern the removal of Cr(VI) remains unclear, which was studied in this work. S-nZVI with higher S/Fe molar ratio showed higher surface area, the discrepancy between the surface-area-normalized removal capacity of Cr(VI) by S-nZVI with different S/Fe indicated that the removal of Cr(VI) was also affected by other factors, such as electron transfer ability, surface-bounded Fe(II) species, and surface charges. High specific surface area would provide more active site for Cr(VI) removal, and as an efficient electron conductor, acicular-like FeSx phase would also favor electron transfer from Fe0 core to Cr(VI). Low initial pH also enhanced the Cr(VI) removal, and the Cr(VI) removal capacity by S-nZVI and nZVI was not affected by aging process, these results confirmed that the Fe(II) species also played an important role in the Cr(VI) removal. Other influence factors were also investigated for potential application, including temperature, initial Cr(VI) concentration, ionic strength, and co-existed ions. The removal mechanism of Cr(VI) by S-nZVI involved the sulfide modification to increase the specific surface area and provide more active sites, the corrosion of Fe0 to produce surface-bounded Fe(II) species to adsorb Cr(VI) species, followed by the favored reduction of Cr(VI) to Cr(III) due to the electron transfer ability of FeSx, then the formation of Cr(III)/Fe(III) hydroxides precipitates.
Asunto(s)
Cromo/análisis , Hierro/química , Sulfuros/química , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Adsorción , Concentración de Iones de Hidrógeno , Modelos Teóricos , Concentración OsmolarRESUMEN
Titanium carbide (TiC) with excellent electrical conductivity, chemical and thermal stabilities has been recognized as one of the most promising electrocatalysts. A novel cathode, titanium carbide doped palladium/nickel foam (TiC-Pd/Ni foam), was synthesized via electroless deposition to improve the performance of Pd/Ni foam in electrocatlytic hydrodechlorination (ECH). TiC can be co-precipitated onto the surface of cathode during galvanic replacement reaction between Pd(II) solution and Ni foam. Both constant potential and constant current tests proved that TiC-Pd/Ni foam cathode performed remarkably higher activity for 2,4-dichlorobenzoic acid (2,4-DCBA) than Pd/Ni foam cathode, owing to the excellent conductivity of TiC and enhanced water dissociation over TiC-Pd/Ni foam cathode. Under the optimized reaction conditions of -0.85â¯V (vs Ag/AgCl), electrolyte of 10â¯mM and initial pH of 4, 99.8% of aqueous 2,4-DCBA (0.2â¯mM) was removed within 90â¯min. The removal process of the aqueous 2,4-DCBA obeyed first-order decay kinetic model. Over 86.3% of 2,4-DCBA can still be removed by TiC-Pd/Ni foam cathode in the fifth consecutive run within 120â¯min, which was much higher than that of Pd/Ni foam cathode (37.5%). Consequently, TiC-Pd/Ni foam cathode was a promising design for enhanced ECH activity and reduced operation cost.
RESUMEN
In this study, the selective adsorption performance of different Fe-Mn binary oxides (FMBOs) towards Sb(V) in the textile wastewater under different concentrations of coexisting anions, surfactants and dyes were investigated. Results showed that the influences of different anions on the Sb(V) removal followed an order of phosphateâ¯>â¯carbonateâ¯>â¯sulfateâ¯>â¯nitrateâ¯>â¯chloride. The frequently-used organic acid of acetate was found to have insignificant effect. The coexisting surfactant with sulfonic groups could have adverse effect on the removal due to sulfonic groups could compete the adsorptive sites on Fe oxides with Sb(V). While the quaternary ammonium surfactant might have minor effect. The influences of the three widely used dyes on the Sb(V) adsorption decreased in the following order: reactive black-5 >acid orange-7> disperse blue-60, which confirmed that the dyes with sulfonic groups would have relatively higher effect. The selective adsorption capacities of Sb(V) by FMBOs followed an order of FMBO3> FMBO5 >FMBO10> FMBO20>PFO. Fixed-bed column adsorption supplied useful parameters and evidently indicated that the cyclic utilization of FMBO3 was cost-efficient for practical dynamic Sb(V) removal. The Sb(V) removal by FMBO3 from real textile wastewater can simultaneously improve the removal efficiency, stabilize pH and prevent the increase of iron concentration as compared to the traditional coagulation, further demonstrating the high practical applicability of FMBO3.