Study of vascular sclerosing agent based on the dual mechanism of vascular endothelial cell damage-plasmin system inhibition.

Venous malformations are a vascular disorder. Currently, the use of chemical sclerosing agents is a common clinical approach for the treatment of venous malformations. However, the effectiveness of existing sclerosing agents is unsatisfactory and often accompanied by severe side effects. In this study, we have developed a novel cationic surfactant-based sclerosing agent (POL-TA) by conjugating the plasmin inhibitor tranexamic acid (TA) with a nonionic surfactant polidocanol (POL) through an ester bond. POL-TA induces endothelial cell damage, triggering the coagulation cascade and thrombus formation. Moreover, it releases TA in vivo, which inhibits plasmin activity and the activation of matrix metalloproteinase (MMPs), thereby stabilizing the fibrin network of the thrombus and promoting vascular fibrosis. We have established a cell model using venous malformation endothelial cells and assessed the cellular damage and underlying mechanisms of POL-TA. The inhibitory effects of POL-TA on the plasmin-MMPs system were evaluated using MMP-9 activity assay kit. Additionally, the mice tail vein model was employed to investigate the vascular sclerosing effects and mechanisms of POL-TA.

A copper nanocluster-based multifunctional nanoplatform for augmented chemo/chemodynamic/photodynamic combination therapy of breast cancer.

With the development of nano drug delivery system, the treatment mode that can overcome the shortcomings of chemotherapy drugs and integrate combined therapy remains to be explored. Herein, a nano drug system was designed to achieve the combined effect of chemo/chemodynamic/photodynamic therapy on cancer. Specifically, copper clusters (CuNCs) were used as the carrier, hyaluronic acid (HA) and doxorubicin (DOX) were coupled on CuNCs and then and chlorin e6 (Ce6) was introduced to form the self-assembled HA-CuNCs@DC nanoparticles. In this system, the HA-CuNCs@DC was involved in the reaction to the acidic tumor microenvironment (TME)-release of DOX, which could not only inhibit tumor growth through chemotherapy, but enhance the generation of hydrogen peroxide. CuNCs carriers had the properties of Fenton-like activity to realize chemodynamic therapy (CDT) and oxidase-like activity to deplete intracellular glutathione (GSH). Additionally, the chemotherapy drug susceptibility increased owing to the GSH depletion and the outbreak of reactive oxygen species, indicating the enhanced CDT efficacy and amplified chemotherapy efficacy. It was also noteworthy that Ce6 could be activated by 660 nm light to produce abundant singlet oxygen for photodynamic therapy. Overall, our platform demonstrated excellent biosafety and tumor suppression capabilities. This multimodal theranostic strategy provided new insights into cancer therapy.

The Modified Exenatide Microspheres: PLGA-PEG-PLGA Gel and Zinc-Exenatide Complex Synergistically Reduce Burst Release and Shorten Platform Stage.

The existing exenatide microspheres have the problem of burst release in the early stage, and minimal release in the middle stage which makes it difficult to achieve effective blood drug concentration (platform period). In this study, the modified exenatide microspheres were constructed to address the aforementioned issues. Poly(D,L-lactic-co-glycolic acid) (PLGA) and triblock copolymer with sol-gel conversion characteristics (PLGA-PEG-PLGA gel) were introduced as carriers to prepare microspheres. The hot gel characteristics and hydrophilicity of PLGA-PEG-PLGA gel were utilized to decline the burst release and shorten the platform period. Simultaneously, zinc acetate and exenatide were combined to generate an insoluble complex to further reduce the burst release. Herein, we prepared three types of exenatide microspheres using the solvent evaporation method and investigated their characterization as well as in vitro and in vivo release. According to the experimental findings, the modified exenatide microspheres, i.e., PLGA-PEG-PLGA gel and PLGA co-loaded zinc-exenatide insoluble complex microspheres (Zn-EXT-Gel-MS), had smooth and rounded surfaces, with a particle size of 24.7 µm, and the encapsulation rate reached 89.43%. And it was released for 40 days in vitro, behaving better than the other two microspheres in terms of release behavior. When this product was administered subcutaneously to rats, it produced a comparatively constant plasma exenatide concentration that lasted for 24 days and superior bioavailability than the exenatide microspheres (EXT-MS). The creation of modified exenatide microspheres may serve as a heuristic method for other long-acting medications. Schematic diagram of the synthesis process and release curves of three types of exenatide microspheres in vitro and in vivo.

Design and Evaluation of Ginkgolides Gastric Floating Controlled Release Tablets Based on Solid Supersaturated Self-nanoemulsifying.

Ginkgolides are receptor antagonist of platelet activating factor with great clinical prospect, but its application is limited by its low solubility, short half-life and poor alkaline environment stability. It is difficult to solve these problems with a single drug delivery system. In this study, supersaturated self-nanoemulsifying gastric floating tablets of ginkgolides were developed through the combination of solid supersaturated self-nanoemulsifying drug delivery system (solid S-SNEDDS) and gastric retentive floating drug delivery system (GFDDS) to solve these problems of ginkgolides. Solid S-SNEDDS was prepared by D-optimal mixture design, normalization method and single factor experiment. The properties of solid-S-SNEDDS were studied by TEM, PXRD, FT-IR, SEM and in vitro drug release profile. Then, the optimal formulation of stomach floating tablet was obtained through single factor experiment and center composite design, followed by the study of in vitro release, model and mechanism of release, in vitro buoyancy and kinetics of erosion and swelling. PXRD and FT-IR showed that the drug in solid S-SNEDDS existed in an amorphous manner and formed hydrogen bond with excipients. The results showed that the cumulative release of GA and GB in the optimal tablets was 96.12% and 92.57% higher than the simple tablets within 12 h. The release mechanism of the tablet was skeleton erosion and drug diffusion. In 12 h, the optimal tablets can float stably in vitro and release the drug at a constant rate, with a cumulative release of more than 80%. In summary, the combination of SNEDDS and GFDDS is a promising means to solve the problems of ginkgolides.

Preparation and Evaluation of Novel Supersaturated Solid Dispersion of Magnolol : Theme: Advancements in Amorphous Solid Dispersions to Improve Bioavailability.

This article aimed to design a new type of supersaturated solid dispersion (NS-SD) loaded with Magnolol (Mag) to raise the oral bioavailability in rats. In the light of the solubility parameters, phase solubility experiments, inhibition precipitation experiment, and in vitro release experiment, Plasdone-630 (PS-630) was selected as the optimum carrier. In addition, Mag-NS-SD was prepared by adding Monoglyceride (MG) and Lecithin High Potency (LHP) into the Mag-S-SD (Mag:PS-630 = 1:3), so as to reduce the dosage of carrier and improve the release rate. Using central composite design of response surface method, the prescription was further optimized. As the optimized condition was Mag:PS-630: MG: LHP = 1:3:0.8:0.266, the drug release rate was the fastest. Besides, after 45 min, the release rate was nearly 100%. The constructed Mag-S-SD and Mag-NS-SD were characterized by powder X-ray diffraction and infrared absorption spectrum. The XRD patterns of Mag-S-SD and Mag-NS-SD indicated that all APIs were amorphous. The IR spectra of Mag-S-SD and Mag-NS-SD demonstrated the existence of hydrogen bonding in the systems. Furthermore, in vivo pharmacokinetic study in rats revealed that compared with Mag and Mag-S-SD, Mag-NS-SD significantly increased the bioavailability (the relative bioavailability was 213.69% and 142.37%, separately). In this study, Mag-NS-SD was successfully prepared, which could improve the oral bioavailability and may increase the clinical application.

Preparation and Evaluation of Self-emulsifying Drug Delivery System (SEDDS) of Cepharanthine.

The aim of this article was to design a self-emulsifying drug delivery system (SEDDS) of loaded cepharanthine (CEP) to improve the oral bioavailability in rats. Based on the solubility determination and pseudo-ternary phase diagram, isopropyl palmitate (IPP) was chosen as the oil phase. Meanwhile, Cremophor RH40 and Macrogol 200 (PEG 200) were chosen as the emulsifier and co-emulsifier, respectively. This prescription was further optimized by using central composite design of response surface methodology. The optimized condition was CEP:IPP:Cremophor RH40:PEG 200=3.6:30.0:55.3:11.1 in mass ratio with maximum drug loading (36.21 mg/mL) and the minimum particle size (36.70 nm). The constructed CEP-SEDDS was characterized by dynamic light scattering, transmission electron microscopy, in vitro release and stability studies. The dissolution level of CEP-SEDDS was nearly 100% after 30 min in phosphate-buffered saline (PBS, pH 6.8) which was higher than that of the pure CEP (approximately 20%). In addition, in vivo pharmacokinetic study in rats showed that CEP-SEDDS dramatically improved bioavailability compared with active pharmaceutical ingredient (API) (the relative bioavailability was 203.46%). In this study, CEP-SEDDS was successfully prepared to enhance the oral bioavailability which might facilitate to increase its better clinical application. Graphical abstract.

Flexibility of 3D Extruded Printing for a Novel Controlled-Release Puerarin Gastric Floating Tablet: Design of Internal Structure.

The objective of this study was to investigate the development of a novel puerarin gastric floating system with a concentric annular internal pattern by a 3D extrusion-based printing technique and to explore the flexibility of turning the release behavior through the design of the internal structure. The composition consisted of the conventional sustained-release pharmaceutical excipients without addition of foaming agent or light materials. First, the proper alcohol/water proportion was selected for the binding agent. The desired drug release behaviors and good floating properties were obtained either through modification of the formulation composition or adjustment of the internal structure. In vitro, the printed tablets were evaluated for drug release, mechanical properties, lag time, and floating duration time. The in vivo behaviors of the formulations were noted at certain time intervals through assessment of the radiographic pictures of healthy volunteers. The gastric retention time in the 3D-printed tablet was approximately 6 h in vivo. Results indicated these puerarin gastric floating 3D-printed tablets had great potential to achieve good gastric residence time and controlled release. Therefore, 3D extrusion-based printing appears to be appropriate for the production of oral administration systems, owing to its flexibility and the great floating ability and controlled-release capacity of its products.

Thermal Extrusion 3D Printing for the Fabrication of Puerarin Immediate-Release Tablets.

Thermal extrusion (TE) 3D printing is a thermoplastic semisolid-based rapid prototyping process, which is capable of building complex structures. The aim of this study was to manufacture rapid-release puerarin tablets without solvent through TE 3D printing. Novel rapid-release tablets were fabricated with polyethylene glycol (PEG 4000) as the carrier at appropriate puerarin/PEG 4000 ratios, assessed through differential scanning calorimetry (DSC), solubility, and dissolution tests. The novel structures of 3D-printed tablets with five different values were formed by printing paths, which established a flexible way of adjusting in vitro drug release. An obvious acceleration (85% of cumulative release about 7.5 min at the soonest) was observed for the tablets with internal structural design. It was inferred that puerarin formed simple eutectic mixtures with PEG 4000 and that puerarin dispersed into the carrier based on DSC and X-Ray powder diffraction (XRD). This highlights the combined advantage of PEG as a soluble polymer with TE 3D printing and provides a suitable system for rapid puerarin release.

Preparation and Evaluation of mPEG-PLGA Block Copolymer Micelles Loaded with a Sarsasapogenin Derivative.

Sarsasapogenin derivative 5n (SGD 5n) is a new compound with potent antitumor efficacy, but the low solubility severely affects its absorption and bioavailability. Therefore, the SGD 5n-loaded mPEG-PLGA block copolymer micelles were developed to improve the value of SGD 5n in clinical application. The polymeric micelles were prepared by an organic solvent evaporation method, and the encapsulation efficiency (EE), drug loading (DL), critical micelle concentrations (CMC), morphology, particle size, and zeta potential were determined. The cytotoxicity was examined by the MTT assay, and the cellular uptake study was performed by confocal laser scanning microscopy. A model of tumor-bearing mouse was established to study the antitumor activity in vivo. The results demonstrated that the particle size of the prepared micelle was 124.6 ± 9.6 nm, the encapsulation efficiency was 82.0 ± 2.9%, and the drug loading was 8.3 ± 0.4%. The results of cytotoxicity and cellular uptake demonstrated that the SGD 5n-loaded micelles could efficiently enter tumor cells, and the cellular uptake of SGD 5n presented concentration and time dependence. This study demonstrated that the prepared SGD 5n-loaded polymeric micelles had significant antitumor activity and provided a basis for clinical development of new compound SGD 5n.

Structure-Based Gastro-Retentive and Controlled-Release Drug Delivery with Novel 3D Printing.

In the present contribution, the aim is to explore and establish a way in which 3D printing and gastro-retentive drug delivery systems (GRDDSs) are combined (focusing on inner structure innovation) to achieve extended and stable gastro-retention and controlled-release of drug. Three digital models diverse in construction were designed and substantialized by a pressure-assisted microsyringe (PAM) 3D printer. Preparations were characterized by means of DSC, XRD, FTIR, and SEM. In vitro buoyancy study and in vivo gamma scintigraphy method were conducted to validate gastro-retention property of these innovative preparations in vitro/in vivo respectively. Release kinetic model was established and release mechanism was discussed. Tablets manufactured under certain range of parameters (intersecting angle, full filling gap) were tight and accurate in shape. Tablets printed with specific parameters (full filling gap, 50%; nozzle extrusion speed, 0.006 mm/s; layer height, 0.4 mm; compensation value, 0.25; quantity of layers, 15; outline printing value, 2) exhibited satisfactory in vitro (10-12 h)/in vivo (8-10 h) retention ability and possessed stable 10-12 h controlled-release quality. In general, 3D printing has tremendous advantage over conventional fabrication technique in intricate drug delivery systems and will be widely employed in pharmacy.

A novel ion-activated in situ gelling ophthalmic delivery system based on κ-carrageenan for acyclovir.

The aim of this study was to prepare and evaluate ion-activated in situ gel ophthalmic drug delivery system based on κ-carrageenan (KC), using acyclovir as a model drug, hydroxypropyl methylcellulose (HPMC) as the viscosity agent and hydroxypropyl-ß-cyclodextrin (HP-ß-CD) as the penetration enhancer. The two ternary phase diagrams exhibited the effect of K+ and Ca2+ on the sol-to-gel transition, which turned out that KC was more sensitive to K+. The optimal ophthalmic matrix (prepared from KC and HPMC) was optimized with in vitro drug release test. The apparent permeability coefficient of acyclovir under 2% HP-ß-CD was found to have dramatically increased (2.16-ploid) than that of conventional eye drops (p < .05). The ion-activated in situ gel based on KC significantly delayed drug release and its bioavailability could be improved in comparison with the conventional eye drops. Hence, it has the potential to be a novel kind of ocular drug delivery system.

Study of controlled-release floating tablets of dipyridamole using the dry-coated method.

Dipyridamole (DIP), having a short biological half-life, has a narrow absorption window and is primarily absorbed in the stomach. So, the purpose of this study was to prepare controlled-release floating (CRF) tablets of dipyridamole by the dry-coated method. The influence of agents with different viscosity, hydroxypropylmethylcellulose (HPMC) and polyvinylpyrollidon K30 (PVP K30) in the core tablet and low-viscosity HPMC and PVP K30 in the coating layer on drug release, were investigated. Then, a study with a three-factor, three-level orthogonal experimental design was used to optimize the formulation of the CRF tablets. After data processing, the optimized formulation was found to be: 80 mg HPMC K4M in the core tablet, 80 mg HPMC E15 in core tablet and 40 mg PVP K30 in the coating layer. Moreover, an in vitro buoyancy study showed that the optimized formulation had an excellent floating ability and could immediately float without a lag time and this lasted more than 12 h. Furthermore, an in vivo gamma scintigraphic study showed that the gastric residence time of the CRF tablet was about 8 h.

In vitro and in vivo evaluation of controlled-release matrix tablets of highly water-soluble drug applying different mw polyethylene oxides (PEO) as retardants.

The aim of the work presented is to prepare a controlled-release hydrophilic matrix tablet (CMT) controlling release of highly water-soluble drug applying pure combination of high- and low-Mw PEO as matrix materials, to avoid the lag time of drug release, and to overcome incomplete release in later stages. The influences of types and amounts of different Mw PEOs used, drug loading, pH of release medium and agitation rate on drug release were evaluated. The study of uptake and erosion of matrix was conducted and mechanism of improving drug release was discussed. In vivo pharmacokinetics of the CMT and reference preparation self-made controlled-release osmotic pump tablets (COPT) were performed in beagle dogs. The optimized formulation containing 43% PEO WSR 303 and 32% PEO N750 showed a zero order release from 1 h to 12 h. In vivo results demonstrated that the CMT had similar AUC0-48 h and Cmax with the COPT but smaller Tmax than the COPT and provided a more stable therapeutic concentration compared to the COPT. In conclusion, hydrophilic matrix tablet combining only different Mw PEOs as matrix materials had very good potential to be developed into a controlled-release drug delivery system for highly water-soluble drug. Besides, its manufacturing processes were succinct which would be preferable for modern medicine industry.

Analysis of the Literature and Patents on Solid Dispersions from 1980 to 2015.

Background: Solid dispersions are an effective formulation technique to improve the solubility, dissolution rate, and bioavailability of water-insoluble drugs for oral delivery. In the last 15 years, increased attention was focused on this technology. There were 23 marketed drugs prepared by solid dispersion techniques. Objective: This study aimed to report the big picture of solid dispersion research from 1980 to 2015. Method: Scientific knowledge mapping tools were used for the qualitative and the quantitative analysis of patents and literature from the time and space dimensions. Results: Western Europe and North America were the major research areas in this field with frequent international cooperation. Moreover, there was a close collaboration between universities and industries, while research collaboration in Asia mainly existed between universities. The model drugs, main excipients, preparation technologies, characterization approaches and the mechanism involved in the formulation of solid dispersions were analyzed via the keyword burst and co-citation cluster techniques. Integrated experimental, theoretical and computational tools were useful techniques for in silico formulation design of the solid dispersions. Conclusions: Our research provided the qualitative and the quantitative analysis of patents and literature of solid dispersions in the last three decades.

Preparation, Characterization and In Vitro / In Vivo Evaluation of Oral Time-Controlled Release Etodolac Pellets.

The objective of this study was to prepare time-controlled release etodolac pellets to facilitate drug administration according to the body's biological rhythm, optimize the drug's desired effects, and minimize adverse effects. The preparation consisted of three laminal layers from center to outside: the core, the swelling layer, and the insoluble polymer membrane. Factors influenced the core and the coating films were investigated in this study. The core pellets formulated with etodolac, lactose, and sodium carboxymethyl starch (CMS-Na) were prepared by extrusion-spheronization and then coated by a fluidized bed coater. Croscarmellose sodium (CC-Na) was selected as the swelling agent, and ethyl cellulose (EC) as the controlled release layer. The prepared pellets were characterized by scanning electron microscopy and evaluated by a dissolution test and a pharmacokinetic study. Compared with commercial available capsules, pharmacokinetics studies in beagle dogs indicated that the prepared pellets release the drug within a short period of time, immediately after a predetermined lag time. A good correlation between in vitro dissolution and in vivo absorption of the pellets was exhibited in the analysis.

Release Mechanism Between Ion Osmotic Pressure and Drug Release in Ionic-Driven Osmotic Pump Tablets (I).

The objective of this study was to develop an authentic ionic-driven osmotic pump system and investigate the release mechanism, simultaneously exploring the in vitro and in vivo correlation of the ionic-driven osmotic pump tablet. A comparison of the ionic-driven and conventional theophylline osmotic pump, the influence of pH and the amount of sodium chloride on drug release, the relationship between the ionic osmotic pressure and the drug release, and the pharmacokinetics experiment in beagle dogs were investigated. Consequently, the similarity factor (f 2 ) between the novel and conventional theophylline osmotic pump tablet was 60.18, which indicated a similar drug-release behavior. Also, the release profile fitted a zero-order kinetic model. The relative bioavailability of the ionic-driven osmotic pump to the conventional osmotic pump calculated from the AUC (0-∞) was 93.6% and the coefficient (R = 0.9945) confirmed that the ionic-driven osmotic pump exhibited excellent IVIVC. The driving power of the ionic-driven osmotic pump was produced only by ions, which was strongly dependent on the ion strength, and a novel formula for the ionic-driven osmotic pump was derived which indicated that the drug-release rate was proportional to the ionic osmotic pressure and the sodium chloride concentration. Significantly, the formula can predict the drug-release rate and release characteristics of theophylline ionic-driven osmotic pumps, guiding future modification of the ionic osmotic pump.

Therapeutic Effect of a Novel Nano-Drug Delivery System on Membranous Glomerulonephritis Rat Model Induced by Cationic Bovine Serum.

In order to explore a novel high efficacy drug delivery system for membranous glomerulonephritis (MGN), a complex chronic inflammation, methylprednisolone bovine serum albumin nanoparticles (ME BSA NPs) were designed. The nanoparticles were prepared by desolvation-chemical crosslinking method and its physicochemical characterizations were conducted. The experimental MGN rat models induced by cationic bovine serum albumin were established by a modified Border's method and applied in the pharmacodynamics study of ME BSA NPs. The results showed that the particle size, particle dispersion index, and entrapment efficiency of ME BSA NPs were 131.1 ± 3.4 nm, 0.159 ± 0.036, and 71.51 ± 1.74%, respectively. In addition, the image of transmission electron microscopy showed that the ME BSA NPs were the relatively uniform spherical particles. In the in vivo pharmacodynamics study, compared with saline group and SOLU-MEDROL® group, that the ME BSA NPs group was significantly reduced the levels of 24 h urinary protein (P < 0.01) and serum creatinine (P < 0.05). Consequently, these outcomes indicated that the nanoparticles we studied were a promising drug delivery system for the MGN disease, and it may be also useful for other complex chronic inflammations.

In vitro and In vivo Studies on a Novel Bioadhesive Colloidal System: Cationic Liposomes of Ibuprofen.

The objective of this study was to develop an ocular drug delivery system built on the cationic liposomes, a novel bioadhesive colloidal system, which could enhance the precorneal residence time, ocular permeation, and bioavailability of ibuprofen. The optimal formulation of cationic liposomes prepared by ethanol injection method was ultimately confirmed by an orthogonal L9 (33) test design. In addition, γ-scintigraphic technology and the microdialysis technique were utilized in the assessment of in vivo precorneal retention capability and ocular bioavailability individually. In the end, we acquired the optimal formulation of ibuprofen cationic liposomes (Ibu-CL) by orthogonal test design, and the particle size and entrapment efficiency (EE%) were 121.0 ± 3.5 nm and 72.9 ± 3.4%, respectively. In comparison to ibuprofen eye drops (Ibu-ED), Ibu-CL could significantly prolong the T max to 100 min and the AUC to 1.53-folds, which indicated that the Ibu-CL could improve the precorneal retention time and bioavailability of ibuprofen. Consequently, these outcomes designated that the ibuprofen cationic liposomes we researched probably are a promising application in ocular drug delivery system.

Aqueous Polymer Dispersion Coating Used for Osmotic Pump Tablets: Membrane Property Investigation and IVIVC Evaluation.

The objective of this study was to investigate the fundamental properties of propranolol hydrochloride osmotic pump tablets coated by aqueous polymer dispersion, simultaneously exploring the in vitro and in vivo correlation of the tablet. The physicochemical properties and parameters of aqueous polymer dispersion membranes (SEM, water uptake, and water vapor transmission coefficient) were investigated. In addition, the release behavior and the in vitro release and in vivo absorption profiles of the tablets coated by aqueous polymer dispersion were investigated by comparing with propranolol hydrochloride osmotic pump tablets coated by an organic solvent. Results showed that the similarity factor (f 2) between cellulose acetate-coated tablet and Eudragit-coated tablet was 78.1, and f 2 between cellulose acetate-coated tablet and Kollicoat-coated tablet was 77.6. The linear IVIVC of Eudragit-coated and Kollicoat-coated osmotic pump tablets was determined, which confirmed excellent correlation between the absorption in vivo and the drug release in vitro. Consequently, the membrane coated by aqueous polymer dispersion or organic solvent has similar in vitro release rates of controlled release. Also, compared with organic solvent coating, aqueous polymer dispersion has numerous advantages, such as reduced toxicity and no environmental damage. Therefore, the aqueous polymer dispersion technology has enormous potential as a replacement of organic solvent coating.

The reversion of anti-cancer drug antagonism of tamoxifen and docetaxel by the hyaluronic acid-decorated polymeric nanoparticles.

Docetaxel (DTX) and tamoxifen (TMX) are first-line drugs used to treat breast cancer. However when used in combination, they produce antagonism because of their differential metabolic pathways. In order to prevent this antagonism, an amphiphilic copolymer, cholesterol modified hyaruronic acid (HA-CHOL), was synthesized for investigating the co-delivery of TMX and DTX. In vitro drug release experiment of the Co-encapsulated (encapsulated DTX+TMX) nanoparticles (Co-NPs) revealed that NPs with unique release mechanism can markedly reduce the release of these drugs in the circulatory system. However, when reaching in cell, TMX can release rapidly to prevent DTX from coming into contact with metabolizing enzymes. In vitro cytotoxicity experiment revealed that the Co-NPs exhibited a significant synergistic effect for inhibiting the proliferation of the cancer cell lines A549, MCF7 and S180. NPs carrying Coumarin-6(Cou6) exhibited increased cellular uptake compared with Cou6 solution at similar drug concentrations. As an in vivo treatment of xenograft tumors involving 180 cells, the Co-NPs displayed a clear tumor-inhibiting effect. This led us to conclude that the reversion of drug antagonism by NPs was attributed to the increased stability of the nanoparticles in the blood circulation, the efficient cellular uptake, the hierarchical drug metabolism in the tumor and the good and orderly delivery of the drugs to the tumor tissue.