Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
1.
Waste Manag Res ; 34(2): 176-80, 2016 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-26612557

RESUMEN

An appropriate technology for waste utilisation, especially for a large amount of abundant pressed-shredded oil palm empty fruit bunch (OFEFB), is important for the oil palm industry. Self-sustained pyrolysis, whereby oil palm biomass was combusted by itself to provide the heat for pyrolysis without an electrical heater, is more preferable owing to its simplicity, ease of operation and low energy requirement. In this study, biochar production under self-sustained pyrolysis of oil palm biomass in the form of oil palm empty fruit bunch was tested in a 3-t large-scale pool-type reactor. During the pyrolysis process, the biomass was loaded layer by layer when the smoke appeared on the top, to minimise the entrance of oxygen. This method had significantly increased the yield of biochar. In our previous report, we have tested on a 30-kg pilot-scale capacity under self-sustained pyrolysis and found that the higher heating value (HHV) obtained was 22.6-24.7 MJ kg(-1) with a 23.5%-25.0% yield. In this scaled-up study, a 3-t large-scale procedure produced HHV of 22.0-24.3 MJ kg(-1) with a 30%-34% yield based on a wet-weight basis. The maximum self-sustained pyrolysis temperature for the large-scale procedure can reach between 600 °C and 700 °C. We concluded that large-scale biochar production under self-sustained pyrolysis was successfully conducted owing to the comparable biochar produced, compared with medium-scale and other studies with an electrical heating element, making it an appropriate technology for waste utilisation, particularly for the oil palm industry.


Asunto(s)
Arecaceae/química , Biomasa , Carbón Orgánico/análisis , Incineración/métodos , Calor
2.
J Anesth ; 27(3): 468-71, 2013 Jun.
Artículo en Inglés | MEDLINE | ID: mdl-23224764

RESUMEN

The present study was conducted to evaluate the efficacy and safety of BLM-240 (desflurane) in comparison to sevoflurane in Japanese patients. A total of 216 patients were enrolled in this randomized comparative study at 15 medical institutions. The patients received either BLM-240 with 50-70 % N2O in O2 (n = 111), BLM-240 with 30 % O2 in air (n = 55), or sevoflurane with 50-70 % N2O in O2 (n = 50). Efficacy was evaluated by an efficacy rate based on an efficacy evaluation criteria and recovery time to extubation from the discontinuation of the anesthetics. Safety was evaluated by incidence of adverse drug reactions (ADR) and other clinical indicators. The efficacy rate of BLM-240 was 98.8 % (164/166 patients), indicating that BLM-240 is effective as an anesthetic. Time from discontinuation of anesthetic delivery to extubation was 9.7 ± 0.6 min in the BLM-240/N2O group and 14.3 ± 0.9 min in the sevoflurane/N2O group, meeting the pre-defined non-inferiority criteria of BLM-240 to sevoflurane. There was no statistically significant difference in the incidence of total ADR between the BLM-240 group (62.0 %) and sevoflurane group (48.0 %). The results indicate that BLM-240 is an effective and safe inhalation anesthetic in Japanese patients.


Asunto(s)
Anestésicos por Inhalación/administración & dosificación , Anestésicos por Inhalación/efectos adversos , Isoflurano/análogos & derivados , Éteres Metílicos/administración & dosificación , Éteres Metílicos/efectos adversos , Desflurano , Femenino , Humanos , Isoflurano/administración & dosificación , Isoflurano/efectos adversos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Sevoflurano
3.
Biomacromolecules ; 12(9): 3299-304, 2011 Sep 12.
Artículo en Inglés | MEDLINE | ID: mdl-21790202

RESUMEN

Photolysis of poly(L-lactic acid) (PLLA) has many unclear points, such as the degradation mechanism, kinetics, products, and racemization mechanism. To clarify these features of PLLA photolysis, we examined the relationship between photolysis and racemization. The hexad stereosequential analysis of photodegraded PLLA was investigated to specify the racemized positions within a chain in comparison with hydrolysis and thermal degradation. Results from (13)C NMR spectra of UV-irradiated PLLA samples indicated that the samples have racemized d-lactate units at chain ends. From the comparison of racemization behavior among photolysis, hydrolysis, and thermal degradation, it was confirmed that the preferential racemization behavior of each of these three degradation processes is characteristic and distinct, being identified as chain-end racemization, poor racemization, or internal-unit racemization, respectively. The characteristic chain-end racemization behavior of photolysis was first confirmed in this study.


Asunto(s)
Sistemas de Liberación de Medicamentos/métodos , Ácido Láctico/síntesis química , Polímeros/síntesis química , Hidrólisis , Cinética , Ácido Láctico/análisis , Espectroscopía de Resonancia Magnética , Peso Molecular , Fotólisis/efectos de la radiación , Poliésteres , Polímeros/análisis , Estereoisomerismo , Rayos Ultravioleta
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA