RESUMEN
This publisher's note contains a correction to Opt. Lett.49, 674 (2024)10.1364/OL.509981.
RESUMEN
We demonstrate that through inserting a short length of highly birefringent small-core photonic crystal fiber (Hi-Bi SC-PCF) into a soliton fiber laser, the nonlinear polarization rotation effect in this laser can be manipulated, leading to continuous tuning of the output pulse parameters. In experiments, we observed that by adjusting the polarization state of light launched into the Hi-Bi SC-PCF and varying the cavity attenuation, the laser spectral width can be continuously tuned from â¼7.1 to â¼1.7â nm, corresponding to a pulse-width-tuning range from â¼350â fs to â¼1.56â ps. During the parameter tuning, the output pulses strictly follow the soliton area theory, giving an almost constant time-bandwidth-product of â¼0.31. This soliton fiber laser, being capable of continuous parameter tuning, could be applied as the seed source in ultrafast laser systems and may find some applications in nonlinear-optics and soliton-dynamics experiments.
RESUMEN
We demonstrate a compact ultrafast fiber laser system that can deliver 1.87â GHz pulse train at 1550â nm with a pulse energy of 52â pJ and an ultrashort pulse duration of 57â fs. While an acousto-optic mode-locking fiber laser was used as the seed light source at GHz rate, a stage of Er-doped fiber amplifier boosted the laser power to â¼320â mW, giving a pulse energy of â¼170â pJ. Then, a pulse compression setup was constructed, providing a high compression ratio of â¼10 with a total efficiency of â¼32%. In the cascaded compression configuration, multiple fiber samples with alternately normal and anomalous dispersion were fused together, providing efficient nonlinear spectral broadening while suppressing excessive pulse broadening over propagation. This GHz-rate ultrafast fiber laser, with compact configuration, broad optical spectrum, and high time-resolving ability could be used as the seed light source for constructing high-rate, high-power ultrafast laser systems and may find a few applications in optical measurements and microwave photonics.
RESUMEN
Stimulated Brillouin scattering (SBS) in solid-core photonic crystal fibers (PCFs) differs significantly from that in standard optical fibers due to the tight confinement of both optical and acoustic fields in their µm-sized fiber cores, as resultantly evident in their Brillouin gain spectra. Despite many theoretical studies based on either simplified models or numerical simulations, the structural dependency of Brillouin gain spectra in small-core PCFs has not been characterized comprehensively using PCFs with elaborated parameter controls. In this work we report a comprehensive characterization on the core-structure dependences of backward SBS effects in solid-core PCFs that are drawn with systematically varied core-diameter, revealing several key trends of the fiber Brillouin spectrum in terms of its gain magnitude, Brillouin shift and multi-peak structure, which have not been reported in detail previously. Our work provides some practical guidance on PCF design for potential applications like Brillouin fiber lasers and Brillouin fiber sensing.
RESUMEN
We demonstrate the stable and flexible light delivery of multi-microjoule, sub-200-fs pulses over a â¼10-m-long vacuumized anti-resonant hollow-core fiber (AR-HCF), which was successfully used for high-performance pulse synchronization. Compared with the pulse train launched into the AR-HCF, the transmitted pulse train out of the fiber exhibits excellent stabilities in pulse power and spectrum, with pointing stability largely improved. The walk-off between the fiber-delivery and the other free-space-propagation pulse trains, in an open loop, was measured to be <6 fs root mean square (rms) over 90 minutes, corresponding to a relative optical-path variation of <2 × 10-7. This walk-off can be further suppressed to â¼2 fs rms simply by using an active control loop, highlighting the great application potentials of this AR-HCF setup in large-scale laser and accelerator facilities.
RESUMEN
To the best of our knowledge, we demonstrate the first time-domain measurement of µJ-level, few-fs ultraviolet dispersive-wave (DW) pulses generated in gas-filled hollow capillary fibers (HCFs) in an atmosphere environment using several chirped mirrors. The pulse temporal profiles, measured using a self-diffraction frequency-resolved optical gating setup, exhibit full width at half maximum pulse widths of 9.6 fs at 384â nm and 9.4 fs at 430â nm, close to the Fourier-transform limits. Moreover, theoretical and experimental studies reveal the strong influences of driving pulse energy and HCF length on temporal width and shape of the measured DW pulses. The ultraviolet pulses obtained in an atmosphere environment with µJ-level pulse energy, few-fs pulse width, and broadband wavelength tunability are ready to be used in many applications.