Highly Stable Contact Doping in Organic Field Effect Transistors by Dopant-Blockade Method.

In organic device applications, a high contact resistance between metal electrodes and organic semiconductors prevents an efficient charge injection and extraction, which fundamentally limits the device performance. Recently, various contact doping methods have been reported as an effective way to resolve the contact resistance problem. However, the contact doping has not been explored extensively in organic field effect transistors (OFETs) due to dopant diffusion problem, which significantly degrades the device stability by damaging the ON/OFF switching performance. Here, the stability of a contact doping method is improved by incorporating "dopant-blockade molecules" in the poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) film in order to suppress the diffusion of the dopant molecules. By carefully selecting the dopant-blockade molecules for effectively blocking the dopant diffusion paths, the ON/OFF ratio of PBTTT OFETs can be maintained over 2 months. This work will maximize the potential of OFETs by employing the contact doping method as a promising route toward resolving the contact resistance problem.

Attachable and flexible aluminum oxide resistive non-volatile memory arrays fabricated on tape as the substrate.

We fabricated 8 × 8 arrays of non-volatile resistive memory devices on commercially available Scotch® Magic™ tape as a flexible substrate. The memory devices consist of double active layers of Al2O3 with a structure of Au/Al2O3/Au/Al2O3/Al (50 nm/20 nm/20 nm/20 nm/50 nm) on attachable tape substrates. Because the memory devices were fabricated using only dry and low temperature processes, the tape substrate did not suffer from any physical or chemical damage during the fabrication. The fabricated memory devices were turned to the low resistance state at ∼3.5 V and turned to the high resistance state at ∼10 V with a negative differential resistance region after ∼5 V, showing typical unipolar non-volatile resistive memory behavior. The memory devices on the tape substrates exhibited reasonable electrical performances including a high ON/OFF ratio of 104, endurance over 200 cycles of reading/writing processes, and retention times of over 104 s in both the flat and bent configurations.

Controllable deposition of organic metal halide perovskite films with wafer-scale uniformity by single source flash evaporation.

Conventional solution-processing techniques such as the spin-coating method have been used successfully to reveal excellent properties of organic-inorganic halide perovskites (OHPs) for optoelectronic devices such as solar cell and light-emitting diode, but it is essential to explore other deposition techniques compatible with large-scale production. Single-source flash evaporation technique, in which a single source of materials of interest is rapidly heated to be deposited in a few seconds, is one of the candidate techniques for large-scale thin film deposition of OHPs. In this work, we investigated the reliability and controllability of the single-source flash evaporation technique for methylammonium lead iodide (MAPbI3) perovskite. In-depth statistical analysis was employed to demonstrate that the MAPbI3 films prepared via the flash evaporation have an ultrasmooth surface and uniform thickness throughout the 4-inch wafer scale. We also show that the thickness and grain size of the MAPbI3 film can be controlled by adjusting the amount of the source and number of deposition steps. Finally, the excellent large-area uniformity of the physical properties of the deposited thin films can be transferred to the uniformity in the device performance of MAPbI3 photodetectors prepared by flash evaporation which exhibited the responsivity of 0.2 A/W and detectivity of 3.82 × 1011 Jones.

High-Performance Solution-Processed Organo-Metal Halide Perovskite Unipolar Resistive Memory Devices in a Cross-Bar Array Structure.

Resistive random access memories can potentially open a niche area in memory technology applications by combining the advantages of the long endurance of dynamic random-access memory and the long retention time of flash memories. Recently, resistive memory devices based on organo-metal halide perovskite materials have demonstrated outstanding memory properties, such as a low-voltage operation and a high ON/OFF ratio; such properties are essential requirements for low power consumption in developing practical memory devices. In this study, a nonhalide lead source is employed to deposit perovskite films via a simple single-step spin-coating method for fabricating unipolar resistive memory devices in a cross-bar array architecture. These unipolar perovskite memory devices achieve a high ON/OFF ratio up to 108 with a relatively low operation voltage, a large endurance, and long retention times. The high-yield device fabrication based on the solution-process demonstrated here will be a step toward achieving low-cost and high-density practical perovskite memory devices.

Enhanced Charge Injection Properties of Organic Field-Effect Transistor by Molecular Implantation Doping.

Organic semiconductors (OSCs) have been widely studied due to their merits such as mechanical flexibility, solution processability, and large-area fabrication. However, OSC devices still have to overcome contact resistance issues for better performances. Because of the Schottky contact at the metal-OSC interfaces, a non-ideal transfer curve feature often appears in the low-drain voltage region. To improve the contact properties of OSCs, there have been several methods reported, including interface treatment by self-assembled monolayers and introducing charge injection layers. Here, a selective contact doping of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4 -TCNQ) by solid-state diffusion in poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) to enhance carrier injection in bottom-gate PBTTT organic field-effect transistors (OFETs) is demonstrated. Furthermore, the effect of post-doping treatment on diffusion of F4 -TCNQ molecules in order to improve the device stability is investigated. In addition, the application of the doping technique to the low-voltage operation of PBTTT OFETs with high-k gate dielectrics demonstrated a potential for designing scalable and low-power organic devices by utilizing doping of conjugated polymers.

Highly Reliable Superhydrophobic Protection for Organic Field-Effect Transistors by Fluoroalkylsilane-Coated TiO2 Nanoparticles.

One of the long-standing problems in the field of organic electronics is their instability in an open environment, especially their poor water resistance. For the reliable operation of organic devices, introducing an effective protection layer using organo-compatible materials and processes is highly desirable. Here, we report a facile method for the depositing of an organo-compatible superhydrophobic protection layer on organic semiconductors under ambient conditions. The protection layer exhibiting excellent water-repellent and self-cleaning properties was deposited onto organic semiconductors directly using a dip-coating process in a highly fluorinated solution with fluoroalkylsilane-coated titanium dioxide (TiO2) nanoparticles. The proposed protection layer did not damage the underlying organic semiconductors and had good resistance against mechanical-, thermal-, light-stress-, and water-based threats. The protected organic field-effect transistors exhibited more-reliable electrical properties, even when exposed to strong solvents, due to its superhydrophobicity. This study provides a practical solution with which to enhance the reliability of environmentally sensitive organic semiconductor devices in the natural environment.

Origin of multi-level switching and telegraphic noise in organic nanocomposite memory devices.

The origin of negative differential resistance (NDR) and its derivative intermediate resistive states (IRSs) of nanocomposite memory systems have not been clearly analyzed for the past decade. To address this issue, we investigate the current fluctuations of organic nanocomposite memory devices with NDR and the IRSs under various temperature conditions. The 1/f noise scaling behaviors at various temperature conditions in the IRSs and telegraphic noise in NDR indicate the localized current pathways in the organic nanocomposite layers for each IRS. The clearly observed telegraphic noise with a long characteristic time in NDR at low temperature indicates that the localized current pathways for the IRSs are attributed to trapping/de-trapping at the deep trap levels in NDR. This study will be useful for the development and tuning of multi-bit storable organic nanocomposite memory device systems.

Integration of Flexible and Microscale Organic Nonvolatile Resistive Memory Devices Using Orthogonal Photolithography.

We present the integration of flexible and microscale organic nonvolatile resistive memory devices fabricated in a cross-bar array structure on plastic substrates. This microscale integration was made via orthogonal photolithography method using fluorinated photoresist and solvents and was achieved without causing damage to the underlying organic memory materials. Our flexible microscale organic devices exhibited high ON/OFF ratio (I(ON/I(OFF) > 10(4)) under bending conditions. In addition, the ON and OFF states of our flexible and microscale memory devices were maintained for 10,000 seconds without any serious degradation.

1/f Noise Scaling Analysis in Unipolar-Type Organic Nanocomposite Resistive Memory.

We studied noise characteristics of a nanocomposite of polyimide (PI) and phenyl-C61-butyric acid methyl ester (PCBM) (denoted as PI:PCBM), a composite for the organic nonvolatile resistive memory material. The current fluctuations were investigated over a bias range that covers various intermediate resistive states and negative differential resistance (NDR) in organic nanocomposite unipolar resistive memory devices. From the analysis of the 1/f(γ) type noises, scaling behavior between the relative noise power spectral density S̃ and resistance R was observed, indicating a percolating behavior. Considering a linear rate equation of the charge trapping-detrapping at traps, the percolation behavior and NDR could be understood by the modulation of the conductive phase fraction φ with an external bias. This study can enhance the understanding of the NDR phenomena in organic nanocomposite unipolar resistive memory devices in terms of the current path formation and the memory switching.