RESUMEN
Despite the rapid advances in process analytical technology, the assessment of protein refolding efficiency has largely relied on off-line protein-specific assays and/or chromatographic procedures such as reversed-phase high-performance liquid chromatography and size exclusion chromatography. Due to the inherent time gap pertaining to traditional methods, exploring optimum refolding conditions for many recombinant proteins, often expressed as insoluble inclusion bodies, has proven challenging. The present study describes a novel protein refolding sensor that utilizes liquid crystals (LCs) to discriminate varying protein structures during unfolding and refolding. An LC layer containing 4-cyano-4'-pentylbiphenyl (5CB) intercalated with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) is used as a sensing platform, and its proof-of-concept performance is demonstrated using lysozyme as a model protein. As proteins unfold or refold, a local charge fluctuation at their surfaces modulates their interaction with zwitterionic phospholipid DOPE. This alters the alignment of DOPE molecules at the aqueous/LC interface, affecting the orientational ordering of bulk LC (i.e., homeotropic to planar for refolding and planar to homeotropic for unfolding). Differential polarized optical microscope images of the LC layer are subsequently generated, whose brightness directly linked to conformational changes of lysozyme molecules is quantified by gray scale analysis. Importantly, our LC-based refolding sensor is compatible with diverse refolding milieus for real-time analysis of lysozyme refolding and thus likely to facilitate the refolding studies of many proteins, especially those lacking a method to determine structure-dependent biological activity.
Asunto(s)
Cristales Líquidos , Muramidasa , Cristales Líquidos/química , Fosfolípidos/química , Compuestos de Bifenilo/químicaRESUMEN
Recent advances in using biological scaffolds for nanoparticle synthesis have proven to be useful for preparing various nanostructures with uniform shape and size. Proteins are significant scaffolds for generating various nanostructures partly because of the presence of many functional groups to recognize different chemistries. In this endeavor, cocosin protein, an 11S allergen, is prepared from coconut fruit and employed as a potential scaffold for synthesizing Mn3O4 materials. The interaction between protein and manganese ions is studied in detail through isothermal calorimetric titration. At increased scaffold availability, the Mn3O4 material adopts the exact hexamer structure of the cocosin protein. The electrochemical supercapacitive properties of the cocosin-Mn3O4 material are found to have a high specific capacitance of 751.3 F g-1 at 1 A g-1 with cyclic stability (92% of capacitance retention after 5000 CV cycles) in a three-electrode configuration. The Mn3O4//Mn3O4 symmetric supercapacitor device delivers a specific capacitance of 203.8 F g-1 at 1 A g-1 and an outstanding energy and power density of 91.7 W h kg-1 and 899.5 W kg-1, respectively. These results show that cocosin-Mn3O4 could be considered a suitable electrode for energy storage applications. Moreover, the cocosin protein to be utilized as a novel scaffold in protein-nanomaterial chemistry could be useful for protein-assisted inorganic nanostructure synthesis in the future.
Asunto(s)
Compuestos de Manganeso , Óxidos , Capacidad Eléctrica , ElectrodosRESUMEN
Opal-structured thin-film hydrogel materials with micropatterns hold great potential for utility in a wide range of sensing applications. Micropatterning offers key advantages such as ready addressability, high throughput assay, and multiplexing. However, controlled fabrication of such films in a rapid, inexpensive, and reliable manner remains a challenge. Existing techniques suffer from long opal deposition times and often involve complex and arduous steps. In this report, we examined a simple micromolding-based evaporation-polymerization method for the fabrication of poly(ethylene glycol)-based hydrogel films containing micropatterned opal structures. Specifically, intense and uniform opalescent colors were achieved by evaporative deposition of polystyrene bead solution in patterned micromolds. These opal micropatterns were then captured in hydrogel films by simple photopolymerization of a UV-curable PEG diacrylate solution. The as-prepared films show high tunability as well as responsiveness to various environmental cues readily manifested via shifts in color. Combined with UV-vis reflectance spectroscopy and scanning electron microscopy results, these findings illustrate the robust, simple, and reliable nature of our integrated deposition-polymerization approach for controlled fabrication of optically active and stimuli-responsive functional materials. We thus envision that the results and the facile approach reported here can be extended to many application areas including environmental monitoring, diagnostics, and biosensing applications.
RESUMEN
Carbon nanotubes (CNTs) have attracted considerable attention because of their high electrical conductivity and outstanding mechanical properties. As such, there have been numerous attempts to form CNTs into diverse structures for use in a wide range of applications. However, the intrinsic high aspect ratios of CNTs and resulting deformability have prevented the fabrication of sophisticated CNT-based structures, especially for three-dimensional (3D) cellular architectures. To challenge this limitation, we present a novel method to fabricate a 3D CNT cellular network from the assembly of microfluidically synthesized CNT-shelled microbubbles. We successfully generated stable spherical CNT-shelled bubbles with excellent size and shape uniformity by precisely controlling bubble dimensions by varying microfluidic variables. We also developed a fundamental understanding of the bubble stability, which allowed us to suppress shrinkage-induced deformation. The synthesized CNT-shelled bubbles were assembled into a 3D close-packed structure, followed by treatment with thermal reduction to induce interfacial bonding and transformation into a closed cellular network structure. Overall, this work provides a new strategy of assembling 1D nanomaterials as the building blocks for well-regulated 3D closed cellular architectures with improved structural or physical properties.
RESUMEN
When multiple intermolecular interactions occur simultaneously, complexed molecules undergo gelation by inter-cohesive bonding, inducing a pseudo-crosslinking effect to form a supramolecular gel. Among the number of substances that can induce supramolecular assembly, phenolic species such as 3,4-dihydroxy-l-phenylalanine (DOPA) are widely utilized for synthesizing adhesive materials. However, despite the strong adhesion capability of monomeric phenol, it lacks cohesive strength and rarely forms a supramolecular gel to secure its mechanical properties. In this study, to overcome this obstacle, we synthesized a supramolecular coacervate hydrogel by simply mixing poly(N-vinylpyrrolidone) (PVP) and tannic acid (TA), resulting in strong cohesive interactions by virtue of the larger molecular size of TA and reinforced molecular interactions attributed to the presence of galloyl groups with a high density. We further analyzed the rheological and adhesive properties of PVP-TA coacervate hydrogels, revealing that they could exhibit not only a self-healing property, but also super adhesive properties with an average adhesion strength of 3.71 MPa on a glass substrate, which is >4 times stronger than that of conventional PVP.
RESUMEN
Wrinkling is a well-known example of instability-driven surface deformation that occurs when the accumulated compressive stress exceeds the critical value in multilayered systems. A number of studies have investigated the instability conditions and the corresponding mechanisms of wrinkling deformation. Force balance analysis of bilayer systems, in which the thickness of the capping layer is importantly considered, has offered a useful approach for the quantitative understanding of wrinkling. However, it is inappropriate for multilayer wrinkling (layer number > 3) consisting of heterogeneous materials (e.g. polymer/metal or inorganic), in which the thickness variation in the substrate is also crucial. Therefore, to accommodate the additive characteristics of multilayered systems, we thermally treated tri- or quad-layer samples of polymer/metal multilayers to generate surface wrinkles and used a cumulative energy balance analysis to consider the individual contribution of each constituent layer. Unlike the composite layer model, wherein the thickness effect of the capping layer is highly overestimated for heterogenously stacked multilayers, our approach precisely reflects the bending energy contribution of the given multilayer system, with results that match well with experimental values. Furthermore, we demonstrate the feasibility of this approach as a metrological tool for simple and straightforward estimation of the thermomechanical properties of polymers, whereby a delicate change in the Young's modulus of a thin polymeric layer near its glass transition temperature can be successfully monitored.
RESUMEN
With the advent of the era of consumer-oriented displays and mobile devices, the importance of barrier film coatings for securing devices from oxygen or moisture penetration has become more salient. Recently developed approaches to generate gas barrier films in a combination of polyelectrolyte multilayer matrices and incorporated inorganic nanosheets have shown great potential in outperforming conventional gas barrier films. However, these films have the intrinsic drawback of vulnerability to brittleness and inability to stretch for flexible device applications. To overcome this issue, we present a method in which we prepare multilayered films of complementarily charged polyurethane and graphene oxide platelets using spin-assisted, layer-by-layer self-assembly to obtain well-stacked film structures. As a result, the multilayered, thin films deposited on a poly(ethylene terephthalate) (PET) substrate can exhibit significantly reduced oxygen penetration properties (â¼30 cc m-2 day-1 for the oxygen transmission rate) while still demonstrating large bending or stretching deformations. Therefore, the proposed approach in this study is anticipated to be extensively utilized for surface coating and protection of flexible and stretchable devices under various operating conditions.
RESUMEN
Engineered materials that promote cell adhesion and cell growth are important in tissue engineering and regenerative medicine. In this work, we produced poly(dopamine) (PDA) films with engineered patterns for improved cell adhesion. The patterned films were synthesized via the polymerization of dopamine at the air-water interface of a floating bed of spherical particles. Subsequent dissolution of the particles yielded free-standing PDA films with tunable geometrical patterns. Our results show that these patterned PDA films significantly enhance the adhesion of both cancer cells and stem cells, thus showing promise as substrates for cell attachment for various biomedical applications.
Asunto(s)
Adhesión Celular , Indoles/química , Polímeros/química , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Propiedades de SuperficieRESUMEN
Metal-phenolic networks (MPNs) are a versatile class of self-assembled materials that are able to form functional thin films on various substrates with potential applications in areas including drug delivery and catalysis. Different metal ions (e.g., FeIII, CuII) and phenols (e.g., tannic acid, gallic acid) have been investigated for MPN film assembly; however, a mechanistic understanding of the thermodynamics governing MPN formation remains largely unexplored. To date, MPNs have been deposited at low ionic strengths (<5 mM), resulting in films with typical thicknesses of â¼10 nm, and it is still unclear how a bulk complexation reaction results in homogeneous thin films when a substrate is present. Herein we explore the influence of ionic strength (0-2 M NaCl) on the conformation of MPN precursors in solution and how this determines the final thickness and morphology of MPN films. Specifically, the film thickness increases from 10 nm in 0 M NaCl to 12 nm in 0.5 M NaCl and 15 nm in 1 M NaCl, after which the films grow rougher rather than thicker. For example, the root-mean-square roughness values of the films are constant below 1 M NaCl at 1.5 nm; in contrast, the roughness is 3 nm at 1 M NaCl and increases to 5 nm at 2 M NaCl. Small-angle X-ray scattering and molecular dynamics simulations allow for comparisons to be made with chelated metals and polyelectrolyte thin films. For example, at a higher ionic strength (2 M NaCl), sodium ions shield the galloyl groups of tannic acid, allowing them to extend away from the FeIII center and interact with other MPN complexes in solution to form thicker and rougher films. As the properties of films determine their final performance and application, the ability to tune both thickness and roughness using salts may allow for new applications of MPNs.
RESUMEN
Polymeric thin films coated on non-wettable substrates undergo film-instabilities, which are usually manifested as surface deformation in the form of dewetting or wrinkling. The former takes place in fluidic films, whereas the latter occurs in solid films. Therefore, there have rarely been reports of systems involving simultaneous deformations of dewetting and wrinkling. In this study, we propose polymeric thin films of liquid crystalline (LC) mesogens prepared on a non-wettable Si substrate and apply a treatment of plasma irradiation to form a thin polymerized layer at the surface. The resulting compressive stress generated in the surface region drives the formation of wrinkles, while at the same time, dipolar attraction between LC molecules induces competitive cohesive dewetting. Intriguing surface structures were obtained whereby dewetting-like hole arrays are nested inside the randomly propagated wrinkles. The structural features are readily controlled by the degree of surface cross-linking, hydrophilicity of the substrates, and the LC film thickness. In particular, dewetting of LC mesogens is observed to be restricted to occur at the trough regions of wrinkles, exhibiting the typical behavior of geometrically confined dewetting. Finally, wrinkling-dewetting mixed structures are separated from the substrate in the form of free standing films to demonstrate the potential applicability as membranes.
RESUMEN
Colloidal photonic crystals (CPCs) provide a convenient way to generate structural colour with high stability against degradation under environmental factors. For a number of applications including flexible electronic and energy devices, it is important to generate flexible structural colour that maintains its colour regardless of the angle of observation and the extent of mechanical deformation. However, it is challenging to simultaneously achieve these goals because anisotropy in typical CPC structures (e.g., CPC films) tends to lead to angle-dependent photonic properties and also changes in the lattice constant due to mechanical deformation lead to changes in the photonic properties of CPCs. To overcome these challenges, we present a means of fabricating large-area free-standing films of CPC structures that exhibit angle- and strain-independent photonic characteristics. First, monodisperse double emulsions encapsulating colloidal crystal arrays are prepared using a microfluidic device. By inducing crystallization of highly charged polystyrene particles in the core of double emulsions using osmotic annealing, we generate angle independent colloidal photonic crystal (CPC) supraparticles. Moreover, the shape and crystallinity of the CPC supraparticles can be tuned by changing the concentration of salt in the solution used for osmotic annealing. Subsequently, an array of CPC supraparticles is embedded inside an elastomeric matrix to form a flexible free-standing film, which exhibits structural colours that are independent of viewing angles and externally applied strain.
Asunto(s)
Coloides/química , Color , Cristalización , Fotones , Poliestirenos/químicaRESUMEN
Gecko-like dry adhesive using high aspect ratio polymeric nanohairs has insuperable limitations, although it has huge potential in many applications. Repeated harsh contacts on a target substrate lead to physical collapse of nanohairs and significant degradation of the adhesion property, because the polymeric nanohairs are quite fragile due to poor mechanical robustness. Herein, we demonstrate a highly robust gecko-like dry adhesive with unidirectionally stooped polymeric nanohairs (diameter 100 nm) with a high aspect ratio (â¼9) using an ultrathin metal coating. 100 cycles of repeated adhesion tests with 1 N preloading force did not significantly degrade adhesion or cause collapse of nanohairs. We believe that this approach allows gecko-like dry adhesive to be utilized in many related applications and diverse industry interests.
RESUMEN
With the escalating global demand for electric vehicles and sustainable energy solutions, increasing focus is placed on developing electrochemical systems that offer fast charging and high-power output, primarily governed by mass transport. Accordingly, porous carbons have emerged as highly promising electrochemically active or supporting materials due to expansive surface areas, tunable pore structures, and superior electrical conductivity, accelerating surface reaction. Yet, while substantial research has been devoted to crafting various porous carbons to increase specific surface areas, the optimal utilization of the surfaces remains underexplored. This review emphasizes the critical role of the fluid dynamics within multiscale porous carbonaceous electrodes, leading to substantially enhanced pore utilization in electrochemical systems. It elaborates on strategies of using sacrificial templates for incorporating meso/macropores into microporous carbon matrix, while exploiting the unique properties of polyphenol moieties such as sustainable carbons derived from biomass, inherent adhesive/cohesive interactions with template materials, and facile complexation capabilities with diverse materials, thereby enabling adaptive structural modulations. Furthermore, it explores how multiscale pore configurations influence pore-utilization efficiency, demonstrating advantages of incorporating multiscale pores. Finally, synergistic impact on the high-power electrochemical systems is examined, attributed to improved fluid-dynamic behavior within the carbonaceous frameworks, providing insights for advancing next-generation high-power electrochemical applications.
RESUMEN
The binder is an essential component in determining the structural integrity and ionic conductivity of Li-ion battery electrodes. However, conventional binders are not sufficiently conductive and durable to be used with solid-state electrolytes. In this study, a novel system is proposed for a Li secondary battery that combines the electrolyte and binder into a unified structure, which is achieved by employing para-phenylenediamine (pPD) moiety to create supramolecular bridges between the parent binders. Due to a partial crosslinking effect and charge-transferring structure of pPD, the proposed strategy improves both the ionic conductivity and mechanical properties by a factor of 6.4 (achieving a conductivity of 3.73 × 10-4 S cm-1 for poly(ethylene oxide)-pPD) and 4.4 (reaching a mechanical strength of 151.4 kPa for poly(acrylic acid)-pPD) compared to those of conventional parent binders. As a result, when the supramolecules of pPD are used as a binder in a pouch cell with a lean electrolyte loading of 2 µL mAh-1 , a capacity retention of 80.2% is achieved even after 300 cycles. Furthermore, when it is utilized as a solid-state electrolyte, an average Coulombic efficiency of 99.7% and capacity retention of 98.7% are attained under operations at 50 °C without external pressure or a pre-aging process.
RESUMEN
Anisotropic wrinkling which utilizes the anisotropic nature of liquid crystalline polymer (LCP) is demonstrated as a means of physical self-assembly to produce periodic microstructures. Through the plasma treatment on the molecularly aligned LCP film surface, one-dimensionally ordered wrinkle pattern was spontaneously formed on glass substrates without employing external thin-film deposition or prestrain control of the system. Experimental results indicate that the directionality of the wrinkle pattern can be tailored by the structural ordering of LCP molecules in the bilayer system of a hard skin layer on a soft substrate. Studies on process variables, such as the plasma treatment time and the film thickness, were conducted to figure out the effect on the wrinkling morphology. Due to its spatial periodicity over a large area and undemanding requirement of the process, this approach can be a candidate for the microfabrication in various applications.
RESUMEN
Using tungsten disulfide (WS2) as a hydrogen evolution reaction (HER) electrocatalyst brought on several ways to surpass its intrinsic catalytic activity. This study introduces a nanodomain tungsten oxide (WO3) interface to 1T-WS2, opening a new route for facilitating the transfer of a proton to active sites, thereby enhancing the HER performance. After H2S plasma sulfurization on the W layer to realize nanocrystalline 1T-WS2, subsequent O2 plasma treatment led to the formation of amorphous WO3 (a-WO3), resulting in a patchwork-structured heterointerface of 1T-WS2/a-WO3 (WSO). Addition of a hydrophilic interface (WO3) facilitates the hydrogen spillover effect, which represents the transfer of absorbed protons from a-WO3 to 1T-WS2. Moreover, the faster response of the cathodic current peak (proton insertion) in cyclic voltammetry is confirmed by the higher degree of oxidation. The rationale behind the faster proton insertion is that the introduced a-WO3 works as a proton channel. As a result, WSO-1.2 (the ratio of 1T-WS2 to a-WO3) exhibits a remarkable HER activity in that 1T-WS2 consumes more protons provided by the channel, showing an overpotential of 212 mV at 10 mA/cm2. Density functional theory calculations also show that the WO3 phase gives higher binding energies for initial proton adsorption, while the 1T-WS2 phase shows reduced HER overpotential. This improved catalytic performance demonstrates a novel strategy for water splitting to actively elicit the related reaction via efficient proton transport.
RESUMEN
The ability to control the shape of hollow particles (e.g., capsules or bubbles) holds great promise for enhancing the encapsulation efficiency and mechanical/optical properties. However, conventional preparation methods suffer from a low yield, difficulty in controlling the shape, and a tedious production process, limiting their widespread application. Here, we present a method for fabricating polyhedral graphene oxide (GO)-shelled microbubbles with sharp edges and vertices, which is based on the microfluidic generation of spherical compound bubbles followed by shell deformation. Sphere-to-polytope deformation is a result of the shell instability due to gradual outward gas transport, which is dictated by Laplace pressure across the shell. The shape-variant behaviours of the bubbles can also be attributed to the compositional heterogeneity of the shells. In particular, the high degree of control of microfluidic systems enables the formation of non-spherical bubbles with various shapes; the structural motifs of the bubbles are easily controlled by varying the size and thickness of the mid-shell in compound bubbles, ranging from tetrahedra to octahedra. The strategy presented in this study provides a new route for fabricating 3D structured solid bubbles, which is particularly advantageous for the development of high-performance mechanical or thermal material applications.
RESUMEN
The fabrication and spatial positioning of electrodes are becoming central issues in battery technology because of emerging needs for small scale power sources, including those embedded in flexible substrates and textiles. More generally, novel electrode positioning methods could enable the use of nanostructured electrodes and multidimensional architectures in new battery designs having improved electrochemical performance. Here, we demonstrate the synergistic use of biological and nonbiological assembly methods for fabricating and positioning small battery components that may enable high performance microbatteries with complex architectures. A self-assembled layer of virus-templated cobalt oxide nanowires serving as the active anode material in the battery anode was formed on top of microscale islands of polyelectrolyte multilayers serving as the battery electrolyte, and this assembly was stamped onto platinum microband current collectors. The resulting electrode arrays exhibit full electrochemical functionality. This versatile approach for fabricating and positioning electrodes may provide greater flexibility for implementing advanced battery designs such as those with interdigitated microelectrodes or 3D architectures.
Asunto(s)
Bacteriófago M13/química , Fuentes de Energía Bioeléctrica/virología , Electroquímica/métodos , Electrodos , Nanotecnología/métodos , Nanocables/química , Microscopía de Fuerza AtómicaRESUMEN
MXenes have received much attention as promising candidates for noble metal-free hydrogen evolution reaction (HER) electrocatalysts due to their high electrical conductivity, surface hydrophilicity, abundant surface functional groups, and great potential for rational hybridization with other materials. Herein, a novel porous monolayered-Ti3C2Tx@NiCoP (P-Ti3C2Tx@NiCoP) nanostructure was synthesized with uniform distribution of bimetallic compounds for improved charge transfer capability and electrocatalytic activity. In experiments, H2O2-utilized oxidation formed a highly mesoporous structure with a maximized surface area of monolayered MXenes as the support. A subsequent solvothermal process followed by phosphidation enabled successful anchoring of highly HER-active NiCoP nanoclusters onto abundantly exposed terminal edges of the P-Ti3C2Tx support. The structural porosity of the P-Ti3C2Tx nanoflakes played an important role in creating additional room for embedding catalytically active species while stably imparting high electrical conductivity to accelerate charge transfer to NiCoP nanoclusters. With structural modification and effective hybridization, P-Ti3C2Tx@NiCoP showed highly enhanced HER activity with significantly lower overpotentials of 115 and 101 mV at a current density of -10 mA cm-2 in 0.5 M H2SO4 and 1.0 M KOH, respectively, along with showing long-term stability over 60 h. As such, our approach of designing structurally modified-Ti3C2Tx and hybridizing with other electrocatalytically active species would function as a solid platform for implementing Ti3C2Tx-based hetero-nanostructures to achieve state-of-the-art performance in next-generation energy conversion applications.
RESUMEN
We present aqueous dispersions of conjugated polymer nanowires (CPNWs) with improved light absorption properties aimed at aqueous-based applications. We assembled films of a donor-acceptor-type conjugated polymer and liquid crystalline 4-n-octylbenzoic acid by removing a cosolvent of their mixture solutions, followed by annealing of the films, and then formed aqueous-dispersed CPNWs with an aspect ratio >1000 by dispersing the films under ultrasonication at a basic pH. X-ray and spectroscopy studies showed that the polymer and liquid crystal molecules form independent domains in film assemblies and highly organized layer structures in CPNWs. Our ordered molecular assemblies in films and aqueous dispersions of CPNWs open up a new route to fabricate nanowires of low-band-gap linear conjugated polymers with the absorption maximum at 794 nm remarkably red-shifted from 666 nm of CPNWs prepared by an emulsion process. Our results suggest the presence of semicrystalline polymorphs ß1 and ß2 phases in CPNWs due to long-range π-π stacking of conjugated backbones in compactly organized lamellar structures. The resulting delocalization with a reduced energy bang gap should be beneficial for enhancing charge transfer and energy-conversion efficiencies in aqueous-based applications such as photocatalysis.