RESUMEN
The formation of dimer-Cu species, which serve as the active sites of the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR), relies on the mobility of CuI species in the channels of the Cu-SSZ-13 catalysts. Herein, the key role of framework Brønsted acid sites in the mobility of reactive Cu ions was elucidated via a combination of density functional theory calculations, in situ impedance spectroscopy, and in situ diffuse reflectance ultraviolet-visible spectroscopy. When the number of framework Al sites decreases, the Brønsted acid sites decrease, leading to a systematic increase in the diffusion barrier for [Cu(NH3)2]+ and less formation of highly reactive dimer-Cu species, which inhibits the low-temperature NH3-SCR reactivity and vice versa. When the spatial distribution of Al sites is uneven, the [Cu(NH3)2]+ complexes tend to migrate from an Al-poor cage to an Al-rich cage (e.g., cage with paired Al sites), which effectively accelerates the formation of dimer-Cu species and hence promotes the SCR reaction. These findings unveil the mechanism by which framework Brønsted acid sites influence the intercage diffusion and reactivity of [Cu(NH3)2]+ complexes in Cu-SSZ-13 catalysts and provide new insights for the development of zeolite-based catalysts with excellent SCR activity by regulating the microscopic spatial distribution of framework Brønsted acid sites.
RESUMEN
Metal-free carbon-based catalysts are attracting much attention in the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR). However, the mechanism of the NH3-SCR reaction on carbon-based catalysts is still controversial, which severely limits the development of carbon-based SCR catalysts. Herein, we successfully reconstructed carbon-based catalysts through oxidation treatment with nitric acid, thereby enhancing their low-temperature activity in NH3-SCR. Combining experimental results and density functional theory (DFT) calculations, we proposed a previously unreported NH3-SCR reaction mechanism over carbon-based catalysts. We demonstrated that C-OH and C-O-C groups not only effectively activate NH3 but also remarkedly promote the decomposition of intermediate NH2NO. This study enhances the understanding of the NH3-SCR mechanism on carbon-based catalysts and paves the way to develop low-temperature metal-free SCR catalysts.
Asunto(s)
Amoníaco , Carbono , Teoría Funcional de la Densidad , Oxidación-Reducción , Metales , CatálisisRESUMEN
The urgent environmental concern of methane abatement, attributed to its high global warming potential, necessitates the development of methane oxidation catalysts (MOC) with enhanced low-temperature activity and durability. Herein, an iridium-doped PdOx nanoparticle supported on silicalite-1 zeolite (PdIr/S-1) catalyst was synthesized and applied for methane catalytic combustion. Comprehensive characterizations confirmed the atomically dispersed nature of iridium on the surface of PdOx nanoparticles, creating an Ir4f-O-Pdcus microstructure. The atomically doped Ir transferred more electrons to adjacent oxygen atoms, modifying the electronic structure of PdOx and thus enhancing the redox ability of the PdIr/S-1 catalysts. This electronic modulation facilitated methane adsorption on the Pd site of Ir4f-O-Pdcus, reducing the energy barrier for C-H bond cleavage and thereby increasing the reaction rate for methane oxidation. Consequently, the optimized PdIr0.1/S-1 showed outstanding low-temperature activity for methane combustion (T50 = 276 °C) after aging and maintained long-term stability over 100 h under simulated exhaust conditions. Remarkably, the novel PdIr0.1/S-1 catalyst demonstrated significantly enhanced activity even after undergoing harsh hydrothermal aging at 750 °C for 16 h, significantly outperforming the conventional Pd/Al2O3 catalyst. This work provides valuable insights for designing efficient and durable MOC catalysts, addressing the critical issue of methane abatement.
Asunto(s)
Iridio , Metano , Nanopartículas , Oxidación-Reducción , Metano/química , Iridio/química , Catálisis , Nanopartículas/química , Zeolitas/química , Paladio/químicaRESUMEN
Magnetic particles (MPs), with magnetite (Fe3O4) and maghemite (γ-Fe2O3) as the most abundant species, are ubiquitously present in the natural environment. MPs are among the most applied engineered particles and can be produced incidentally by various human activities. Identification of the sources of MPs is crucial for their risk assessment and regulation, which, however, is still an unsolved problem. Here, we report a novel approach, hierarchical classification-aided stable isotopic fingerprinting, to address this problem. We found that naturally occurring, incidental, and engineered MPs have distinct Fe and O isotopic fingerprints due to significant Fe/O isotope fractionation during their generation processes, which enables the establishment of an Fe-O isotopic library covering complex sources. Furthermore, we developed a three-level machine learning model that not only can distinguish the sources of MPs with a high precision (94.3%) but also can identify the multiple species (Fe3O4 or γ-Fe2O3) and synthetic routes of engineered MPs with a precision of 81.6%. This work represents the first reliable strategy for the precise source tracing of particles with multiple species and complex sources.
Asunto(s)
Compuestos Férricos , Compuestos Férricos/químicaRESUMEN
Aiming at purification of NOx from hydrogen internal combustion engines (HICEs), the hydrogen selective catalytic reduction (H2-SCR) reaction was investigated over a series of Pt/KFI zeolite catalysts. H2 can readily reduce NOx to N2 and N2O while O2 inhibited the deNOx efficiency by consuming the reductant H2. The Pt/KFI zeolite catalysts with Pt loading below 0.1 wt.% are optimized H2-SCR catalysts due to its suitable operation temperature window since high Pt loading favors the H2-O2 reaction which lead to the insufficient of reactants. Compared to metal Pt0 species, Ptδ+ species showed lower activation energy of H2-SCR reaction and thought to be as reasonable active sites. Further, Eley-Rideal (E-R) reaction mechanism was proposed as evidenced by the reaction orders in kinetic studies. Last, the optimized reactor was designed with hybrid Pt/KFI catalysts with various Pt loading which achieve a high NOx conversion in a wide temperature range.
Asunto(s)
Hidrógeno , Zeolitas , Hidrógeno/química , Oxidación-Reducción , Cinética , Amoníaco/química , CatálisisRESUMEN
Ca-type todorokite catalysts were designed and prepared by a simple redox method and applied to the selective reduction of NOx by NH3 (NH3-SCR) for the first time. Compared with the Na-type manjiroite prepared by the same method, the todorokite catalysts with different Mn/Ca ratios showed greatly improved catalytic activity for NOx reduction. Among them, Mn8Ca4 catalyst exhibited the best NH3-SCR performance, achieving 90% NOx conversion within temperature range of 70-275°C and having a high sulphur resistance. Compared to the Na-type manjiroite sample, Ca-type todorokite catalysts possessed an increased size of tunnel, resulting in a larger specific surface area. As increased the amounts of Ca doping, the Na content in Ca-type todorokite catalysts significantly decreased, providing larger amounts of Brønsted acid sites for NH3 adsorption to produce NH4+. The NH4+ species were highly active for reaction with NO + O2, playing a determining role in NH3-SCR process at low temperatures. Meanwhile, larger amounts of surface adsorbed oxygen contained over the Ca-doping samples than that over Na-type manjiroite, promoting the oxidation of NO and fast SCR processes. Over the Ca-type todorokite catalysts, furthermore, nitrates produced during the flow of NO + O2, were more active for reaction with NH3 than that over Na-type manjiroite, benefiting the occurrence of NH3-SCR process. This study provides novel insights into the design of NH3-SCR catalysts with high performance.
Asunto(s)
Amoníaco , Frío , Temperatura , Oxidación-Reducción , Nitratos , Oxígeno , CatálisisRESUMEN
Monoatomic dispersion of precious metals on the surface of CeO2 nanocrystals is a highly practical approach for dramatically reducing the usage of precious metals while exploiting the unique properties of single-atom catalysts. However, the specific atomic sites for anchoring precious metal atoms on the CeO2 support and underlying chemical mechanism remain partially unknown. Herein, we show that the terminal hydroxyls on the (100) surface are the most stable sites for anchoring Ag atoms on CeO2 , indicating that CeO2 nanocubes are the most efficient substrates to achieve monoatomic dispersion of Ag. Importantly, the newly identified chemical mechanism for single-metal-atom dispersion on CeO2 nanocubes appears to be generic and can thus be extended to other precious metals (Pt and Pd). In fact, our experiments also show that atomically dispersed Pt/Pd species exhibit morphology- and temperature-dependent CO selectivity in the catalytic CO2 hydrogenation reaction.
RESUMEN
Methane (CH4) is the second most consequential greenhouse gas after CO2, with a substantial global warming potential. The CH4 catalytic combustion offers an efficient method for the elimination of CH4. However, improving the catalytic performance of Pd-based materials for low-temperature CH4 combustion remains a big challenge. In this study, we synthesized an enhanced Pd/5NiAlOx catalyst that demonstrated superior catalytic activity and improved water resistance compared to the Pd/Al2O3 catalyst. Specifically, the T90 was decreased by over 100 °C under both dry and wet conditions. Introducing Ni resulted in an enormously enhanced number of oxygen defects on the obtained 5NiAlOx support. This defect-rich support facilitates the anchoring of PdO through increased electron transfer, thereby inhibiting the production of high-valence Pd(2+δ)+ and stimulating the generation of unsaturated Pd sites. Pd0 can effectively activate surface oxygen and PdO plays a significant role in activating CH4, resulting in high activity for Pd/5NiAlOx. On the other hand, the increased water resistance of Pd/5NiAlOx was mainly due to the generation of *OOH species and the lower accumulation of surface -OH species during the reaction process.
RESUMEN
The WHO substantially redefined cemento-osseous dysplasia (COD) in 2017. The descriptions of COD in the 2005 and 2017 WHO classifications are quite different. In this study, we compared the difference in COD description between the 2005 and 2017 editions of the WHO classifications in detail. There are remarkable differences in the terminology, definition, synonyms, epidemiology, classifications, clinical features, radiation/pathology, prognosis, and predictive factors of COD between the two versions. At present, the surgical treatment of COD is less defined, and there is no clear guidance for the treatment of sclerotic bone. In this study, we extracted the affected teeth without removing the sclerotic bone when the bone absorption line can be only found between the root and the lesion, and we extracted the teeth as well as the lesion and curetted the granulation tissue when a bone absorption line could be seen between the lesion and the alveolar bone. According to our observation, the position of the bone absorption line can be used as a reference for the selection of sclerotic bone treatment. Sclerotic bone preservation did not increase its volume and density after tooth extraction. Sclerotic bone was composed of highly mineralized tissue with less blood vessels and cells. The position of the bone resorption line can be used as a basis for treatment selection. The high mineralization of the lesion may weaken its anti-infection ability.