RESUMEN
Accurate prediction and measurement of yield stress are crucial for optimizing sludge treatment and disposal. However, the differences and applicability of various methods for measuring yield stress are subjects of ongoing debate. Meanwhile, literature on measuring sludge yield stress is limited to low solid concentrations (TS <10%), understanding and studying the yield stress of medium to high solid concentration sludge is crucial due to increasingly stringent standards for sludge treatment and disposal. So, this study employed a rotational rheometer to measure sludge yield stress across a wide range of TS (4-50%) using steady shear, dynamic oscillatory shear, and transient shear. The study derived significant conclusions by comparing and summarizing the applicability and limitations of each testing method: Dynamic oscillatory shear methods, including G'-σ curve method, γ-σ curve method, and G**γc method can measure sludge yield stress ranging from 4% to 40% TS, while other methods are restricted to low or limited solid concentrations; The G' = Gâ³ method, utilizing the intersection of G' and Gâ³ curves, consistently yields the highest value for yield stress when 4%≤ TS ≤ 12%; The rotational rheometer cannot measure sludge yield stress when the solid concentration exceeds 40% TS; The relationship between sludge yield stress and solid concentration is stronger as a power-law for TS ≤ 25%, transitioning to linear for higher concentrations (28%≤ TS <40%). This study systematically explores the applicability and limitations of various measurement methods for characterizing sludge yield stress across a wide range of solid concentrations, providing valuable guidance for scientific measurement and highlighting challenging research issues.
Asunto(s)
Aguas del Alcantarillado , Reología/métodos , Eliminación de Residuos Líquidos/métodosRESUMEN
Exploring moisture distribution, especially bound water content, is vital for studying and applying sludge dewatering. The differential scanning calorimetry (DSC) method has been extensively utilized for the quantitative characterization of moisture distribution in sludge. However, this method has certain limitations, such as low reproducibility of results, leading to controversial parameter values in different papers and hindering result comparison. In this study, we investigated the influence of key sample attributes on measuring sludge bound water using the DSC method.The findings demonstrated that the moisture content and mass of sludge samples substantially influenced the reproducibility and stability of DSC test results. To ensure data reliability, the moisture content of the sludge sample should be minimized and kept below 84%, with the mass not exceeding 10 mg. Compared to the influence of sludge moisture content and sample mass, the heating rate (1â5 °C/min) minimally affected DSC test results. This study offers a comprehensive insight into how sample attributes and test parameters affect the quantitative characterization of bound water in sludge using the DSC method. Furthermore, practical strategies are presented to enhance the method's applicability in sludge bound water characterization.
RESUMEN
Effective deep-dewatering is crucial for wastewater sludge management. Currently, the dominant methods focus on promoting cell lysis to release intracellular water, but these techniques often lead to secondary pollution and require stringent conditions, limiting their practical use. This study explores an innovative method using a commercially available complex quaternary ammonium salt surfactant, known as G-agent. This agent remarkably reduces the sludge water content from 98.6 % to 56.8 % with a low dosage (50 mg/g DS) and under neutral pH conditions. This approach surpasses Fenton oxidation in terms of dewatering efficiency and avoids the necessity for cell lysis and bound water release, thereby reducing the risk of secondary pollution in the filtrate, including heavy metals, nitrogen, phosphorus, and other contaminants. The G-agent plays a significant role in destabilizing flocs and enhancing flocculation during the conditioning and initial dewatering stages, effectively reducing the solid-liquid interfacial affinity of the sludge. In the compression filtration stage, the agent's solidification effect is crucial in forming a robust skeleton that improves pore connectivity within the filter cake, leading to increased water permeability, drainage performance and water flow-out efficiency. This facilitates deep dewatering of sludge without cell lysis. The study reveals that the G-agent primarily improves water flow-out efficiency rather than water flowability, indicating that cell lysis and bound water release are not indispensable prerequisites for sludge deep-dewatering. Furthermore, it presents an encouraging prospect for overcoming the limitations associated with conventional sludge deep-dewatering processes.