RESUMEN
Lithium (Li) metal solid-state batteries feature high energy density and improved safety and thus are recognized as promising alternatives to traditional Li-ion batteries. In practice, using Li metal anodes remains challenging because of the lack of a superionic solid electrolyte that has good stability against reduction decomposition at the anode side. Here, we propose a new electrolyte design with an antistructure (compared to conventional inorganic structures) to achieve intrinsic thermodynamic stability with a Li metal anode. Li-rich antifluorite solid electrolytes are designed and synthesized, which give a high ionic conductivity of 2.1 × 10-4 S cm-1 at room temperature with three-dimensional fast Li-ion transport pathways and demonstrate high stability in Li-Li symmetric batteries. Reversible full cells with a Li metal anode and LiCoO2 cathode are also presented, showing the potential of Li-rich antifluorites as Li metal-compatible solid electrolytes for high-energy-density solid-state batteries.
RESUMEN
A novel efficient method is proposed to synthesize a large amount of Li5.4PS4.4Cl1.6 precursor in only 5 minutes with a conductivity of 20 mS cm-1 after sintering, which can replace the common ball-milling method. The ASSBs show excellent electrochemical performance with high loading (20 mg cm-2) and great capacity retention (80% after 200 cycles). This is important for the industrial production of sulfide solid electrolytes for fabricating Ah-level ASSBs.
Asunto(s)
Electrólitos , Litio , Conductividad Eléctrica , SulfurosRESUMEN
External sulfate attack is an important factor causing a decrease in the mechanical properties of cement-based materials. In this paper, a computational prediction model of elastic modulus, considering the characteristics of sulfate corrosion from outside to inside and the influence of the interface transition zone (ITZ), was established to predict the elastic modulus of mortar under the external sulfate attack. Firstly, the backscattered electron (BSE) images of mortar and the algorithm of image threshold segmenting were used to determine a reasonable thickness of corroded ITZ. Secondly, the nanoindentation test was adopted to acquire the microscopic elastic parameters of phases (sand, cement, and ITZ) in corroded mortar. Moreover, the mortar mix proportion and Lu and Torquato's model were adopted to calculate the volume fractions of phases. Finally, a computational prediction model of elastic modulus of mortar under sulfate attack was proposed with homogenization methods. The results indicate that the thickness of corroded ITZ is 20 mm, and the error values of elastic modulus between the theoretical prediction results and the experimental results are within 8%, indicating that the macroscopic elastic modulus of corroded mortar can be precisely predicted by the computational prediction model of elastic modulus.