Fabrication of Nickel Single Atoms with Ionic Liquids by Only One-Step Pyrolysis for CO2 Electroreduction.

Single-atom catalysts (SACs) are appealing for carbon dioxide (CO2) electroreduction with the utmost advantages; however, their preparation is still challenging because of the complicated procedure. Here, a novel Ni-based single-atom catalyst (Ni-BB-BD) is constructed from raw materials, [BMIM]BF4, [BMIM]DCN, and NiCl2·6H2O, directly without any precursor by only one-step pyrolysis. Ni-BB-BD achieves a maximum carbon monoxide Faradaic efficiency (FECO) of 96.5% at -0.8 V vs RHE, as well as long-term stability over 16 h. High current density up to -170.6 mA cm-2 at -1.0 V vs RHE is achieved in the flow cell along with a CO selectivity of 97.7%. It is identified that [BMIM]BF4 is the nitrogen source, while [BMIM]DCN is mainly taken as the carbon source. Theoretical studies have revealed that the rich nitrogen content, especially for the uncoordinated nitrogen, plays a critical role in lowering rate-limiting barrier height. This work develops a facile and effective strategy to prepare the SACs.

Suppression of Cation Intermixing Highly Boosts the Performance of Core-Shell Lanthanide Upconversion Nanoparticles.

Lanthanide upconversion nanoparticles (UCNPs) have been extensively explored as biomarkers, energy transducers, and information carriers in wide-ranging applications in areas from healthcare and energy to information technology. In promoting the brightness and enriching the functionalities of UCNPs, core-shell structural engineering has been well-established as an important approach. Despite its importance, a strong limiting issue has been identified, namely, cation intermixing in the interfacial region of the synthesized core-shell nanoparticles. Currently, there still exists confusion regarding this destructive phenomenon and there is a lack of facile means to reach a delicate control of it. By means of a new set of experiments, we identify and provide in this work a comprehensive picture for the major physical mechanism of cation intermixing occurring in synthesis of core-shell UCNPs, i.e., partial or substantial core nanoparticle dissolution followed by epitaxial growth of the outer layer and ripening of the entire particle. Based on this picture, we provide an easy but effective approach to tackle this issue that enables us to produce UCNPs with highly boosted optical properties.

In Situ N, O Co-Doped Nanoporous Carbon Derived from Mixed Egg and Rice Waste as Green Supercapacitor.

The conversion of nitrogen-oxygen-rich biomass wastes into heteroatomic co-doped nanostructured carbons used as energy storage materials has received widespread attention. In this study, an in situ nitrogen-oxygen co-doped porous carbon was prepared for supercapacitor applications via a two-step method of pre-carbonization and pyrolytic activation using mixed egg yolk/white and rice waste. The optimal sample (YPAC-1) was found to have a 3D honeycomb structure composed of abundant micropores and mesopores with a high specific surface area of 1572.1 m2 g-1, which provided abundant storage space and a wide transport path for electrolyte ions. Notably, the specific capacitance of the constructed three-electrode system was as high as 446.22 F g-1 at a current density of 1 A g-1 and remained above 50% at 10 A g-1. The capacitance retention was 82.26% after up to 10,000 cycles. The symmetrical capacitor based on YPAC-1 with a two-electrode structure exhibited an energy density of 8.3 Wh kg-1 when the power density was 136 W kg-1. These results indicate that porous carbon materials prepared from mixed protein and carbohydrate waste have promising applications in the field of supercapacitors.

Boosting the Efficiency of Dye-Sensitized Solar Cells by a Multifunctional Composite Photoanode to 14.13 .

We report a new strategy to fabricate a multifunctional composite photoanode containing TiO2 hollow spheres (TiO2 -HSs), Au nanoparticles (AuNPs) and novel NaYF4 : Yb,Er@NaLuF4 : Eu@SiO2 upconversion nanoparticles (UCNPs). The AuNPs are grown on the photoanode film including TiO2 -HSs and UCNPs by a simple in situ plasmonic treatment. As a result, an impressive power conversion efficiency of 14.13 % is obtained, which is a record for N719 dye-based dye-sensitized solar cells, demonstrating great potential for the solar cells toward commercialization. This obvious enhancement is ascribed to a collaborative mechanism of the TiO2 -HSs exhibiting excellent light-scattering ability, of the UCNPs converting near-infrared photons into visible photons and of the AuNPs presenting outstanding surface plasmon resonance effect. Notably, a steady-state experiment further reveals that the champion cell exhibits 95.33 % retainment in efficiency even after 180 h of measurements, showing good device stability.

Insight into the Active Sites of N,P-Codoped Carbon Materials for Electrocatalytic CO2 Reduction.

Doping heteroatoms in carbon materials is a promising method to prepare the robust electrocatalysts for the carbon dioxide reduction reaction (CO2RR), which is beneficial for sustainable energy storage and environmental remediation. However, the obscure recognition of active sites is the obstacle for further development of high-efficiency electrocatalysts, especially for the N,P-codoped carbon materials. Herein, a series of N,P-codoped carbon materials (CNP) is prepared with different N and P contents to explore the relationship between the N/P configuration and the CO2RR activity. As compared with the N-doped carbon materials, the additional P doping is helpful to improve the activity. The optimum N,P-codoped carbon materials (CNP-900) achieve 80.8% CO Faradaic efficiency (FECO) at a mild overpotential of 0.44 V. On the basis of the X-ray photoelectron spectroscopy results, the suitable ratio between pyridinic N and graphitic N and the least P-N content are beneficial for CO2RR. The density functional theory calculations further illustrate that two elementary steps to form *COOH and *CO in CO2RR are determined by the graphitic N and pyridinic N configurations, respectively. The existence of the P-N configuration breaks the equilibrium between graphitic N and pyridinic N to suppress the activity.

Hydroxyl-Imidazolium Ionic Liquid-Functionalized MIL-101(Cr): A Bifunctional and Highly Efficient Catalyst for the Conversion of CO2 to Styrene Carbonate.

Considerable attention has been focused on the development of catalysts for the coupling reaction of carbon dioxide (CO2) and epoxides due to the distinct advantages and importance of this reaction. To develop high-performance and easy-to-recycle catalyst is still a hot topic, especially for candidates with excellent activity under moderate conditions. A new heterogeneous catalyst, MIL-101-ImEtOH, is reported by post-synthesis modification, in which 2-(1-imidazol-1-yl) ethanol (Im-EtOH) is immobilized on MIL-101(Cr). In the absence of solvent and co-catalyst, MIL-101-ImEtOH exhibits high activity for the cycloaddition of CO2 and styrene oxide. A 95.6% yield is achieved under 0.5 MPa CO2 pressure and 90 °C by utilization of 50 mg of catalyst for 3 h. Moreover, MIL-101-ImEtOH is easily separated from the catalytic system by simple filtration. To elucidate the influence of hydroxyl group and porous structure on catalysis, other two supported ionic liquids, MIL-101-EtIm and PS-ImEtOH, are prepared and used to catalyze the title reaction under the same conditions. The contribution of each active component is determined by density functional theory along with noncovalent interaction analysis.

Odd-Number Cyclo[n]Carbons Sustaining Alternating Aromaticity.

Cyclo[n]carbons (n = 5, 7, 9, ..., 29) composed from an odd number of carbon atoms are studied computationally at density functional theory (DFT) and ab initio complete active space self-consistent field (CASSCF) levels of theory to get insight into their electronic structure and aromaticity. DFT calculations predict a strongly delocalized carbene structure of the cyclo[n]carbons and an aromatic character for all of them. In contrast, calculations at the CASSCF level yield geometrically bent and electronically localized carbene structures leading to an alternating double aromaticity of the odd-number cyclo[n]carbons. CASSCF calculations yield a singlet electronic ground state for the studied cyclo[n]carbons except for C25, whereas at the DFT level the energy difference between the lowest singlet and triplet states depends on the employed functional. The BHandHLYP functional predicts a triplet ground state of the larger odd-number cyclo[n]carbons starting from n = 13. Current-density calculations at the BHandHLYP level using the CASSCF-optimized molecular structures show that there is a through-space delocalization in the cyclo[n]carbons. The current density avoids the carbene carbon atom, leading to an alternating double aromaticity of the odd-number cyclo[n]carbons satisfying the antiaromatic [4k+1] and aromatic [4k+3] rules. C11, C15, and C19 are aromatic and can be prioritized in future synthesis. We predict a bond-shift phenomenon for the triplet state of the cyclo[n]carbons leading to resonance structures that have different reactivity toward dimerization.

Theoretical study on photophysical properties of a series of functional pyrimidine-based organic light-emitting diodes emitters presenting thermally activated delayed fluorescence.

Issue concerning accurate prediction of the reverse intersystem crossing rate (kRISC ) is critical for developing novel efficient thermally activated delayed fluorescence (TADF) materials. In this contribution, the kRISC rates from the lowest excited triplet T1 state to the lowest excited singlet S1 state were evaluated for five donor-π-acceptor-type pyrimidine-based TADF emitters using the semiclassical Marcus theory. Both the singlet-triplet energy difference (ΔEST ) and spin-orbit coupling (V) between the S1 and T1 states were investigated by performing the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. In addition, their fluorescence emission wavelengths (λem ) were also calculated at the TD-DFT level. The predicted kRISC and λem values are found to reproduce well the available experimental findings. The present results reveal that the kRISC rates of molecules possessing the unsymmetrical diphenyl pyrimidine acceptor core are calculated to be slightly larger than those of their analogues with the symmetrical diphenyl pyrimidine. In addition, introducing two tert-butyl groups into the 2,7-positions of the donor moiety of the latter is also an effective method for increasing kRISC when designing TADF emitters. Such a difference is related to the nature of the T1 excited state. A more remarkable charge-transfer (CT) contribution to the state can achieve a smaller ΔEST , leading to a more efficient RISC process, and consequently a shorter delayed fluorescence lifetime as observed experimentally. © 2019 Wiley Periodicals, Inc.

Star-Shaped Molecules as Dopant-Free Hole Transporting Materials for Efficient Perovskite Solar Cells: Multiscale Simulation.

On the reported TCP-OH (See Scheme 1), other two star-shaped molecules are theoretically designed by replacement of side group of TCP-OH by N,N-di(4-methoxyphenyl)aniline for TPAP-OH and oxygen-bridged triarylamine for TBOPP-OH. The core group, phenol, is kept in three molecules. Their potential to be hole transport material in perovskite solar cells without dopants is evaluated by multiscale simulations. The properties of isolated molecules are estimated by the frontier molecular orbital, absorption spectrum, and hole mobility. After that, the HTM@CH3 NH3 PbI3 adsorbed system is studied to consider the influence of adsorption on HTM performance. Besides the primary judgment, the glass transition temperature is also simulated to determine the stability of amorphous film. Not only the chemical stability is evaluated but also the amorphous film stability is considered. The latter is almost neglected in previous theoretical studies to evaluate the properties of HTMs. The performance of a designed molecule is evaluated from both the isolated molecules and HTM@CH3 NH3 PbI3 adsorbed system including aforementioned items, which is favorable to build reliable structure-property relationship.

Theoretical Design of Near-Infrared Al3+ Fluorescent Probes Based on Salicylaldehyde Acylhydrazone Schiff Base Derivatives.

The aim of this paper is to design near-infrared (NIR) Al3+ fluorescent probes based on a Schiff base to extend their applications in biological systems. By combining benzo[h]quinoline unit and salicylaldehyde acylhydrazone, we designed two new Schiff base derivatives. According to theoretical simulations on previous experimental Al3+ probes, we obtained the appropriate theoretical approaches to describe the properties of these fluorescent probes. By employing such approaches on our newly designed molecules, it is found that the new molecules have high selectivity toward Al3+ and that their corresponding Al3+ complexes can emit NIR fluorescence. As a result, they are expected to be potential NIR Al3+ fluorescent probes.

Atomistic insight into the inhibition mechanisms of suppressors of cytokine signaling on Janus kinase.

Suppressors of cytokine signaling (SOCS) act as negative feedback regulators of the Janus kinase/signal transducer (JAK-STAT) signaling pathway by inhibiting the activity of JAK kinase. The kinase inhibitory region (KIR) of SOCS1 targets the substrate binding groove of JAK with high specificity, as demonstrated by significantly higher IC50 following the mutation of any of residue. To gain a greater understanding of the mechanisms of the inhibition of SOCS1 for JAK1, the binding mode, binding free energy decomposition, and desorption mechanism of JAK-SOCS1 complexes as well as a number of mutant systems were identified by extensive molecular dynamics (MD) simulations and the constant pulling velocity (PCV) method. Electrostatic interactions were identified for their contribution to protein-protein binding, which drove interactions between JAK1 and SOCS1. The polar residues Arg56, Arg59, and Asp105 of SOCS1 and Asp1042 and Asp1040 of JAK1 were key components in the binding, and electrostatic interactions of the side chains were prominent. The binding free energies of the six mutant proteins were lower when compared with those of the control proteins, and the side chain interactions were weakened. The residue Asp1040 played a crucial role in KIR close to the binding groove of JAK1. Moreover, salt bridges contributed significantly to JAK1 and SOCS1 binding and cleavage processes. The study presented herein provides a comprehensive understanding of the thermodynamic and dynamic processes of SOCS1 and JAK1 binding that will contribute meaningfully to the design of future studies related to peptide inhibitors based on SOCS1.

Theoretical studies on thermally activated delayed fluorescence mechanism of a series of organic light-emitting diodes emitters comprising 2,7-diphenylamino-9,9-dimethylacridine as electron donor.

According to one experimentally reported thermally activated delayed fluorescence (TADF) emitter (AcDPA-2TP), two new molecules (AcDPA-2PP and AcDPA-TPP) have been designed theoretically to probe into the effect of different acceptor strengths on their TADF mechanisms. In this work, the rates of reverse intersystem crossing (kRISC ) of the three targeted molecules were calculated by the semiclassical Marcus rate expression. The present results demonstrate that the kRISC rate of AcDPA-2PP is estimated to be 5.56 × 106 s-1 , about twice larger than that of AcDPA-2TP (2.63 × 106 s-1 ), and especially AcDPA-TPP is found to exhibit the largest kRISC value (6.97 × 106 s-1 ) among the three molecules. Considering that AcDPA-2TP has been observed to be an efficient TADF emitter, our newly designed two molecules AcDPA-2PP and AcDPA-TPP are also expected to be potential TADF materials. © 2018 Wiley Periodicals, Inc.

Theoretical insights into the 1D-charge transport properties in a series of hexaazatrinaphthylene-based discotic molecules.

Discotic liquid crystal (DLC) materials have attracted considerable attention mainly due to their high charge carrier mobilities in quasi-one-dimensional columns. In this article, five hexaazatrinaphthylene-based DLC molecules were investigated theoretically, and their frontier molecular orbital energy levels, crystal structures, and electron/hole drift mobilities were calculated by combination of density functional theory (DFT) and semiclassical Marcus charge transfer theory. The systems studied in this work include three experimentally reported molecules (1, 2, and 3) and two theoretically designed molecules (4 and 5). Compared with the 1-3 compounds, 4 and 5 have three more extended benzene rings in the π-conjugated core. The present results show that the orders of the frontier molecular orbital energy levels and electron drift mobilities agree very well with the experiment. For 4 and 5, the electron/hole reorganization energies are lower than those of compounds 1-3. Furthermore, the calculated electron/hole transfer integral of 5 is the largest among all the five systems, leading to the highest electron and hole mobilities. In addition, the hydrophobicity and solubility were also evaluated by DFT, indicating that compound 5 has good hydrophobicity and good solubility in trichloromethane. As a result, it is expected that compound 5 can be a potential charge transport material in electronic and optoelectronic devices. © 2017 Wiley Periodicals, Inc.

Catalytic liquefaction of human feces over Ni-Tm/TiO2 catalyst and the influence of operating conditions on products.

In this study, human feces were hydrothermal liquefied and converted into biocrude over Ni-Tm/TiO2 catalyst. The influence of catalysts, reaction temperature, and holding time on the distribution of products and element content of biocrude was assessed. The biocrude yield increased to 53.16% with a reaction temperature of 330 °C, a holding time of 30 min, and adding Ni-Tm/TiO2 catalyst while the liquefaction conversion peaked at 89.61%. The biocrude had an HHV of 36.64 MJ/kg and was similar to heavy crude oil. The biocrude is rich in fatty acid amides, esters, and oxygen-containing-only heteroatom-ring compounds as well as some nitrogen-containing heteroatom-ring compounds. The main gaseous products were CO2, CH4, and C2H6. Hydrothermal liquefaction over Ni-Tm/TiO2 catalyst could be a potential method to handle human excrement treatment and produce biofuel.

Comprehension of the Effect of a Hydroxyl Group in Ancillary Ligand on Phosphorescent Property for Heteroleptic Ir(III) Complexes: A Computational Study Using Quantitative Prediction.

A new Ir(III) complex (dfpypya)2Ir(pic-OH) (2) is theoretically designed by introduction of a simple hydroxyl group into the ancillary ligand on the basis of (dfpypya)2Ir(pic) (1) with the aim to get the high-efficiency and stable blue-emitting phosphors, where dfpypya is 3-methyl-6-(2',4'-difluoro-pyridinato)pyridazine, pic is picolinate, and pic-OH is 3-hydroxypicolinic acid. The other configuration (dfpypya)2Ir(pic-OH)' (3) is also investigated to compare with 2. The difference between 2 and 3 is whether the intramolecular hydrogen bond is formed in the (dfpypya)2Ir(pic-OH). The quantum yield is determined by three different methods including the semiquantitative and quantitative methods. To quantitatively determine the quantum yield is still not an easy task to be completed. This work would provide some useful advices to select the suitable method to reliably evaluate the quantum yield. Complex 2 has larger quantum yield and more stability as compared with 1 and 3. The formation of intramolecular hydrogen bond would become a new method to design new phosphor with the desired properties.

Ultrafast excited-state deactivation of 9-methylhypoxanthine in aqueous solution: A QM/MM MD study.

Photoinduced ultrafast non-adiabatic decay of 9-methylhypoxanthine (9MHPX) in aqueous solution was investigated by ab initio surface-hopping dynamics calculations using a combined quantum mechanical/molecular mechanical approach. The absorption spectra of 9MHPX in aqueous solution were also explored by the hybrid cluster-continuum model at the level of time-dependent density functional theory along with the polarizable continuum model (PCM). The static electronic-structure calculations indicate that the absorption spectra of 9MHPX simulated by TD-B3LYP/PCM and TD-X3LYP/PCM can reproduce very well the experimental findings, with the accuracy of about 0.20 eV. According to dynamics simulations, irradiation of 9MHPX populates the bright excited singlet S1 state, which may undergo an ultrafast non-radiative deactivation to the S0 state. The lifetime of the S1 state of 9MHPX in aqueous solution is predicted to be 115.6 fs, slightly longer than that in the gas phase (88.8 fs), suggesting that the solventwater has no significant influence on the excited-state lifetime of 9MHPX. Such a behavior in 9MHPX is distinctly different from its parent hypoxanthine keto-N9H tautomer in which the excited-state lifetime of the latter in watersolution was remarkably enhanced as compared to the gas phase. The significant difference of the photodynamical behaviors between 9MHPX and keto-N9H can be ascribed to their different hydrogen bond environment in aqueous solution.

Investigation of alanine mutations affecting insulin-like growth factor (IGF) I binding to IGF binding proteins.

Binding properties of wild type (WT) and six single amino acid substituted variants (E3A, E9A, D12A, D20A, F23A, and E58A) of insulin-like growth factor I (IGF-I) were analyzed with respect to their binding details to IGF binding proteins (IGFBPs) by molecular dynamics (MD) simulations. The binding sites and binding interactions on IGF-I and IGFBPs are screened and compared with the static X-ray structure. Electrostatic interaction is the primary driving force of the interaction between IGF-I and IGFBPs. Mutation may cause the rearrangement of binding sites, however, the unfolding of protein induced by mutation is not obvious in this work. We also provide the detailed picture of binding factors. And the results show that, whether the unfolding of helix occurs or not, the Ala mutation will change the molecular atmosphere of the binding interface by the rearrangement of conformation, and further affects the binding residues and binding interactions.

A CASSCF/CASPT2 insight into excited-state intramolecular proton transfer of four imidazole derivatives.

Excited-state intramolecular proton transfer (ESIPT) of four imidazole derivatives, 2-(2'-hydroxyphenyl)imidazole (HPI), 2-(2'-hydroxyphenyl)benzimidazole (HPBI), 2-(2'-hydroxyphenyl)-1H-phenanthro[9,10-d]imidazole (HPPI) and 2-(2'-hydroxyphenyl)-1-phenyl-1H-phenanthro[9,10-d]imidazole (HPPPI), were studied by the sophisticated CASSCF/CASPT2 methodology. The state-averaged SA-CASSCF method was used to optimize their geometry structures of S0 and S1 electronic states, and the CASPT2 calculations were used for the calibration of all the single-point energies, including the absorption and emission spectra. A reasonable agreement is found between the theoretical predictions and the available experimental spectral data. The forward ESIPT barriers of four target compounds gradually decrease with the increase of molecular size. On the basis of the present calculations, it is a plausible speculation that the larger the size, the faster is the ESIPT rate, and eventually, HPPPI molecule can undergo a completely barrierless ESIPT to the more stable S1 keto form. Additionally, taking HPI as a representative example, the radiationless decays connecting the S0 and S1 /S0 conical intersection structures were also studied by constructing a linearly interpolated internal coordinate (LIIC) reaction path. The qualitative analysis shows that the LIIC barrier of HPI in the keto form is remarkably lower than that of its enol-form, indicating that the former has a big advantage over the latter in the nonradiative process.

Design of Mg-Ni binary single-atom catalysts for conversion of carbon dioxide to syngas with a wide tunable ratio: Each species doing its own job or working together to win?

Electrochemical carbon dioxide reduction reaction (eCO2RR) to generate syngas is an appealing strategy for CO2 net reduction. However, it suffers from the inferior faradaic efficiency (FE), selectivity, and difficult modulation of hydrogen/carbon monoxide (H2/CO) ratio. To address these issues, a series of magnesium-nickel (Mg-Ni) dual atomic catalysts with different Ni contents are fabricated on the nitrogen-doped carbon matrix (MgNiX-NC DACs) by one-step pyrolysis. MgNi5-NC electrocatalyst generates 0.51-0.79 H2/CO ratios in a potential range of -0.6 to -1.0 V vs. reversible hydrogen electrode (RHE) and the total FE reaches 100 % with good stability. While a wider range of H2/CO (0.95-4.34) is achieved for MgNi3-NC electrocatalyst in the same overpotential range, which is suitable for typical downstream thermochemical reactions. Introduction of Ni species accelerates the generation of CO, however, there is much less influence on the H2 production as compared with Mg-based single atomic electrocatalyst. According to the experimental results and density functional theory (DFT) calculations, the synergistic effect between Mg and Ni achieves the satisfied results rather than each one fulfill its own duty for selective producing H2 and CO, respectively. This work introduces a feasible approach to develop atomic catalysts on main group metal for more controllable CO2RR.

Morphology controlled synthesis of Fe3+-doped upconversion nanomaterials.

This work details the synthesis of paramagnetic upconversion nanoparticles doped with Fe3+ in various morphologies via the thermal decomposition method, followed by comprehensive characterization of their structures, optical properties and magnetism using diverse analytical techniques. Our findings demonstrate that by precisely modulating the ratio of oleic acid to octadecene in the solvent, one can successfully obtain hexagonal nanodiscs with a consistent and well-defined morphology. Further adjustments in the oleic acid to octadecene ratio, coupled with fine-tuning of the Na+/F- ratio, led to the production of small-sized nanorods with uniform morphology. Significantly, all Fe3+-doped nanoparticles displayed pronounced paramagnetism, with magnetic susceptibility measurements at 1 T and room temperature of 0.15 emu g-1 and 0.14 emu g-1 for the nanodiscs and nanorods, respectively. To further enhance their magnetic properties, we replaced the Y-matrix with a Gd-matrix, and by fine-tuning the oleic acid/octadecene and Na+/F- ratios, we achieved nanoparticles with uniform morphology. The magnetic susceptibility was 0.82 emu g-1 at 1 T and room temperature. Simultaneously, we could control the nanoparticle size by altering the synthesis temperature. These upconversion nanostructures, characterized by both paramagnetic properties and regular morphology, represent promising dual-mode nanoprobe candidates for optical biological imaging and magnetic resonance imaging.