Potential Alignment in Tandem Catalysts Enhances CO2-to-C2H4 Conversion Efficiencies.

The in-tandem catalyst holds great promise for addressing the limitation of low *CO coverage on Cu-based materials for selective C2H4 generation during CO2 electroreduction. However, the potential mismatch between the CO-formation catalyst and the favorable C-C coupling Cu catalyst represents a bottleneck in these types of electrocatalysts, resulting in low tandem efficiencies. In this study, we propose a robust solution to this problem by introducing a wide-CO generation-potential window nickel single atom catalyst (Ni SAC) supported on a Cu catalyst. The selection of Ni SAC was based on theoretical calculations, and its excellent performance was further confirmed by using in situ IR spectroscopy. The facilitated carbon dimerization in our tandem catalyst led to a ∼370 mA/cm2 partial current density of C2H4, corresponding to a faradic efficiency of ∼62%. This performance remained stable and consistent for at least ∼14 h at a high current density of 500 mA/cm2 in a flow-cell reactor, outperforming most tandem catalysts reported so far.

Layered S-Bridged Covalent Triazine Frameworks via a Bifunctional Template-Catalytic Strategy Enabling High-Performance Zinc-Ion Hybrid Supercapacitors.

Exploring covalent triazine frameworks (CTFs) with high capacitative activity is highly desirable and challenging. Herein, the S-rich CTFs cathode is pioneeringly introduced in Zn-ion hybrid supercapacitors (ZSC), achieving outstanding capacity and energy density, and satisfactory anti-freezing flexibility. Specifically, the S-bridged CTFs are synthesized by a bifunctional template-catalytic strategy, where ZnCl2 serves as both the catalyst/solvent and in situ template to construct triazine frameworks with interconnected pores and layered gaps. The resultant CTFs (CTFS-750) are employed as a reasonable pattern-like system to more deeply scrutinize the synergistic effect of S-bridged triazine and layered porous architecture for polymer-based cathodes in Zn-ion storage. The experimental results indicate that the adsorption barriers of Zn-ions on CTFS-750 are effectively weakened, and accessible Zn2+ -absorption sites provided by the C─S─C and C═N bonds have been confirmed via DFT calculations. Consequently, the CTFS-750 cathode-assembled ZSC displays an ultra-high capacity of 211.6 mAh g-1 at 1.0 A g-1 , an outstanding energy density of 202.7 Wh kg-1 , and attractive cycling performance. Moreover, the resulting flexible ZSC device shows superior capacity, good adaptability, and satisfactory anti-freezing behavior. This approach sheds new light on constructing advanced polymer-based cathodes at the atom level and paves the way for fabricating high-performance ZSC and beyond.

Efficient Hydrogen Evolution on Antiperovskite CuNCo3 Nanowires by Mo Incorporation and its Trifunctionality for Zn Air Batteries and Overall Water Splitting.

The current development of single electrocatalyst with multifunctional applications in overall water splitting (OWS) and zinc-air batteries (ZABs) is crucial for sustainable energy conversion and storage systems. However, exploring new and efficient low-cost trifunctional electrocatalysts is still a significant challenge. Herein, the antiperovskite CuNCo3 prototype, that is proved to be highly efficient in oxygen evolution reaction but severe hydrogen evolution reaction (HER) performance, is endowed with optimum HER catalytic properties by in situ-derived interfacial engineering via incorporation of molybdenum (Mo). The as-prepared Mo-CuNCo3 @CoN nanowires achieve a low HER overpotential of 58 mV@10 mA cm-2 , which is significantly higher than the pristine CuNCo3 . The assembled CuNCo3 -antiperovskite-based OWS not only entails a low overall voltage of 1.56 V@10 mA cm-2 , comparable to most recently reported metal-nitride-based OWS, but also exhibits excellent ZAB cyclic stability up to 310 h, specific capacity of 819.2 mAh g-1 , and maximum power density of 102 mW cm-2 . The as-designed antiperovskite-based ZAB could self-power the OWS system generating a high hydrogen rate, and creating opportunity for developing integrated portable multifunctional energy devices.

A Strong and Highly Transparent Ionogel Electrolyte Enabled by In Situ Polymerization-Induced Microphase Separation for High-Performance Electrochromic Devices.

Electrochromic devices built with ionogel electrolytes are seen as a pivotal step toward the future of quasi-solid electrochromic devices, due to their striking properties like exceptional safety and high ionic conductivity. Yet, the poor mechanical strength of electrolyte of these devices remains a constraint that hampers their advancement. As a resolution, this research explores the use of a robust, transparent ionogel electrolyte, which is designed using an in situ microphase separation strategy. The ionogels are highly transparent and robust and exhibit excellent physicochemical stability, including a wide electrochemical window and high temperature tolerance. Benefitting from these properties, a high-performance electrochromic device is fabricated through in situ polymerization with the ionogels, PPRODOT as the electrochromic layer, and PEDOT: PSS as the ion storage layer, achieving high transmittance contrast (43.1%), fast response (1/1.7 s), high coloring efficiency (1296.4 cm2 C-1), and excellent cycling endurance (>99.9% retention after 2000 cycles). In addition, using ITO-poly(ethylene terephthalate) as flexible substrates, a deformable electrochromic device displaying high stability is realized, highlighting the potential use in functional wearables.

Coupling Nano and Atomic Electric Field Confinement for Robust Alkaline Oxygen Evolution.

The alkaline oxygen evolution reaction (OER) is a promising avenue for producing clean fuels and storing intermittent energy. However, challenges such as excessive OH- consumption and strong adsorption of oxygen-containing intermediates hinder the development of alkaline OER. In this study, we propose a cooperative strategy by leveraging both nano-scale and atomically local electric fields for alkaline OER, demonstrated through the synthesis of Mn single atom doped CoP nanoneedles (Mn SA-CoP NNs). Finite element method simulations and density functional theory calculations predict that the nano-scale local electric field enriches OH- around the catalyst surface, while the atomically local electric field improves *O desorption. Experimental validation using in situ attenuated total reflection infrared and Raman spectroscopy confirms the effectiveness of the nano-scale and atomically electric fields. Mn SA-CoP NNs exhibit an ultra-low overpotential of 189 mV at 10 mA cm-2 and stable operation over 100 hours at ~100 mA cm-2 during alkaline OER. This innovative strategy provides new insights for enhancing catalyst performance in energy conversion reactions.

Versatile Synthesis of Carbon Materials using Protic Ionic Liquids and Salts as Precursors.

Carbon materials (CMs) hold immense potential for applications across a wide range of fields. However, current precursors often confront limitations such as low heteroatom content, poor solubility, or complicated preparation and post-treatment procedures. Our research has unveiled that protic ionic liquids and salts (PILs/PSs), generated from the neutralization of organic bases with protonic acids, can function as economical and versatile small-molecule carbon precursors. The resultant CMs display attractive features, including elevated carbon yield, heightened nitrogen content, improved graphitic structure, robust thermal stability against oxidation, and superior conductivity, even surpassing that of graphite. These properties can be elaborate modulated by varying the molecular structure of PILs/PSs. In this Personal Account, we summarize recent developments in PILs/PSs-derived CMs, with a particular focus on the correlations between precursor structure and the physicochemical properties of CMs. We aim to impart insights into the foreseeable controlled synthesis of advanced CMs.

Molecular Engineering of Cation Solvation Structure for Highly Selective Carbon Dioxide Electroreduction.

Balancing the activation of H2 O is crucial for highly selective CO2 electroreduction (CO2 RR), as the protonation steps of CO2 RR require fast H2 O dissociation kinetics, while suppressing hydrogen evolution (HER) demands slow H2 O reduction. We herein proposed one molecular engineering strategy to regulate the H2 O activation using aprotic organic small molecules with high Gutmann donor number as a solvation shell regulator. These organic molecules occupy the first solvation shell of K+ and accumulate in the electrical double layer, decreasing the H2 O density at the interface and the relative content of proton suppliers (free and coordinated H2 O), suppressing the HER. The adsorbed H2 O was stabilized via the second sphere effect and its dissociation was promoted by weakening the O-H bond, which accelerates the subsequent *CO2 protonation kinetics and reduces the energy barrier. In the model electrolyte containing 5 M dimethyl sulfoxide (DMSO) as an additive (KCl-DMSO-5), the highest CO selectivity over Ag foil increased to 99.2 %, with FECO higher than 90.0 % within -0.75 to -1.15 V (vs. RHE). This molecular engineering strategy for cation solvation shell can be extended to other metal electrodes, such as Zn and Sn, and organic molecules like N,N-dimethylformamide.

Metal-Organic Framework Confined Solvent Ionic Liquid Enables Long Cycling Life Quasi-Solid-State Lithium Battery in Wide Temperature Range.

Solid-state Li batteries are receiving increasing attention as a prospective energy storage system due to the high energy density and improved safety. However, the high interfacial resistance between solid-state electrolyte and electrode results in sluggish Li+ transport kinetics. To tackle the interfacial problem and prolong the cycle life of solid-state Li batteries, a quasi-solid-state electrolyte (QSSE) based on a solvate ionic liquid (SIL) space-restricted in nanocages of UIO-66 (SIL/UIO-66) is prepared in this study. Benefiting from the effective spatial confinement of the TFSI- by the pore UIO-66 and the strong chemical interactions between the SIL and metal atoms, SIL/UIO-66 QSSE exhibits high ionic conductivity and good compatibility with electrodes. As a result, Li|QSSE|LFP cells demonstrate excellent rate capability and cycle stability in a wide temperature range of 25-90 °C. This study provides a realistic strategy for the fabrication of safe solid electrolytes with excellent compatibility and long cycle life for high-performance QSSE Li-ion batteries.

New Insight into the Confinement Effect of Microporous Carbon in Li/Se Battery Chemistry: A Cathode with Enhanced Conductivity.

Embedding the fragmented selenium into the micropores of carbon host has been regarded as an effective strategy to change the Li-Se chemistry by a solid-solid mechanism, thereby enabling an excellent cycling stability in Li-Se batteries using carbonate electrolyte. However, the effect of spatial confinement by micropores in the electrochemical behavior of carbon/selenium materials remains ambiguous. A comparative study of using both microporous (MiC) and mesoporous carbons (MeC) with narrow pore size distribution as selenium hosts is herein reported. Systematic investigations reveal that the high Se utilization rate and better electrode kinetics of MiC/Se cathode than MeC/Se cathode may originate from both its improved Li+ and electronic conductivities. The small pore size (<1.35 nm) of the carbon matrices not only facilitates the formation of a compact and robust solid-electrolyte interface (SEI) with low interfacial resistance on cathode, but also alters the insulating nature of Li2 Se due to the emergence of itinerant electrons. By comparing the electrochemical behavior of MiC/Se cathode and the matching relationship between the diameter of pores and the dimension of solvent molecules in carbonate, ether, and solvate ionic liquid electrolyte, the key role of SEI film in the operation of C/Se cathode by quasi-solid-solid mechanism is also highlighted.

Nanoconfined Ionic Liquids.

Ionic liquids (ILs) have been widely investigated as novel solvents, electrolytes, and soft functional materials. Nevertheless, the widespread applications of ILs in most cases have been hampered by their liquid state. The confinement of ILs into nanoporous hosts is a simple but versatile strategy to overcome this problem. Nanoconfined ILs constitute a new class of composites with the intrinsic chemistries of ILs and the original functions of solid matrices. The interplay between these two components, particularly the confinement effect and the interactions between ILs and pore walls, further endows ILs with significantly distinct physicochemical properties in the restricted space compared to the corresponding bulk systems. The aim of this article is to provide a comprehensive review of nanoconfined ILs. After a brief introduction of bulk ILs, the synthetic strategies and investigation methods for nanoconfined ILs are documented. The local structure and physicochemical properties of ILs in diverse porous hosts are summarized in the next sections. The final section highlights the potential applications of nanoconfined ILs in diverse fields, including catalysis, gas capture and separation, ionogels, supercapacitors, carbonization, and lubrication. Further research directions and perspectives on this topic are also provided in the conclusion.

Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices.

Ionic liquids (ILs) are liquids consisting entirely of ions and can be further defined as molten salts having melting points lower than 100 °C. One of the most important research areas for IL utilization is undoubtedly their energy application, especially for energy storage and conversion materials and devices, because there is a continuously increasing demand for clean and sustainable energy. In this article, various application of ILs are reviewed by focusing on their use as electrolyte materials for Li/Na ion batteries, Li-sulfur batteries, Li-oxygen batteries, and nonhumidified fuel cells and as carbon precursors for electrode catalysts of fuel cells and electrode materials for batteries and supercapacitors. Due to their characteristic properties such as nonvolatility, high thermal stability, and high ionic conductivity, ILs appear to meet the rigorous demands/criteria of these various applications. However, for further development, specific applications for which these characteristic properties become unique (i.e., not easily achieved by other materials) must be explored. Thus, through strong demands for research and consideration of ILs unique properties, we will be able to identify indispensable applications for ILs.

Theoretical prediction of LiScO2 nanosheets as a cathode material for Li-O2 batteries.

Our previous study (J. Mater. Chem. A, 2018, 6, 3171-3180) theoretically predicted that a scandium oxide (ScO2) monolayer can deliver high specific capacity and energy density as the active material of a lithium-ion (Li-ion) battery, but the voltage will drop below 0.5 V when ScO2 is lithiated to LiScO2 during the discharge process. The current study predicts that the discharge product LiScO2 in the Li-ion battery mode can potentially work as the host material of Li-O2 batteries. It is found that the adsorption of O2 on the LiScO2 substrate is energetically favored. The LiScO2 substrate can also provide strong affinities to molecular LiO2 and Li2O2 species. It is interesting to find that the presence of an O2 molecule can oxidize the pre-adsorbed Li2O2 molecule and result in two LiO2 molecules. Hence, the final discharge product of the Li-O2 battery using the LiScO2 cathode is expected to be a crystalline-like LiO2 layer. The discharge voltage related to forming a LiO2 layer on the LiScO2 substrate is 3.50 V vs. Li+/Li according to the present theoretical calculation.

Revealing reaction mechanisms of nanoconfined Li2S: implications for lithium-sulfur batteries.

Using Li2S as an active material and designing nanostructured cathode hosts are considered as promising strategies to improve the performance of lithium-sulfur (Li-S) batteries. In this study, the reaction mechanisms during the delithiation of nanoconfined Li2S as an active material, represented by a Li20S10 cluster, are examined by first-principles based calculations and analysis. Local reduction and disproportionation reactions can be observed although the overall delithiation process is an oxidation reaction. Long-chain polysulfides can form as intermediate products; however they may bind to insoluble S2-via Li atoms as mediators. Activating the charging process only requires an overpotential of 0.37 V if using Li20S10 as the active material. Sulfur allotropes longer than cyclo-S8 are observed at the end of the charge process. Although the discharge voltage of Li20S10 is only 1.27 V, it can still deliver an appreciable theoretical energy density of 1480 W h kg-1. This study also suggests that hole polarons, in Li20S10 and intermediate products, can serve as carriers to facilitate charge transport. This work provides new insights toward revealing the detailed reaction mechanisms of nanoconfined Li2S as an active material in the Li-S battery cathode.

From Macromolecular to Small-Molecular Triggers: Facile Method toward Photoinduced LCST Phase Behavior of Thermoresponsive Polymers in Mixed Ionic Liquids Containing an Azobenzene Moiety.

Instead of the reported photoinduced lower critical solution temperature (LCST) phase transition behavior in ionic liquids (ILs) achieved by photofunctional polymers, this study reports the facile photoinduced LCST phase behavior of nonfunctionalized polymers (poly(benzyl methacrylate) (PBnMA) and poly(2-phenylethyl methacrylate) (PPhEtMA)) in mixed ILs (1,3-dimethylimidazolium bis(trifluoromethanesulfonyl)amide; [C1 mim][NTf2 ] and a newly designed functionalized IL containing an azobenzene moiety (1-butyl-3-(4-phenylazobenzyl)imidazolium bis(trifluoromethanesulfonyl)amide; [Azo][NTf2 ])) as a small-molecular photo trigger. Interestingly, the length of the alkyl spacer between the ester and aryl groups, which is the only structural difference between the two polymers, leads to two different photoresponsive LCST phase transition behaviors. On the basis of spectroscopic studies, the different phase transition behaviors of PBnMA and PPhEtMA may attribute to the different cooperative interactions between the polymers and [C1 mim][NTf2 ].

Upper limit of nitrogen content in carbon materials.

Nitrogen-doped carbon materials (NDCs) play an important role in various fields. A great deal of effort has been devoted to obtaining carbon materials with a high nitrogen content; however, much is still unknown about the structure of the nitrogen-doped materials and the maximum nitrogen content possible for such compounds. Here, we demonstrate an interesting relationship between the N/C molar ratio and the N content of NDCs. The upper limit for the nitrogen content of NDCs that might be achieved was estimated and found to strongly depend on the carbonization temperature (14.32 wt% at 1000 °C and 21.66 wt% at 900 °C), irrespective of the precursor or preparation conditions. Simulations suggest that, especially in the carbon architectures obtained at high temperatures, nitrogen atoms are always located on separate hexagon moieties in a graphitic configuration, thereby yielding a critical N/C molar ratio very close to the value estimated from the experimental results.

Protic ionic liquids and salts as versatile carbon precursors.

Instead of traditional polymer precursors and complex procedures, easily prepared and widely obtainable nitrogen-containing protic ionic liquids and salts were explored as novel, small-molecule precursors to prepare carbon materials (CMs) via direct carbonization without other treatments. Depending on the precursor structure, the resultant CMs can be readily obtained with a relative yield of up to 95.3%, a high specific surface area of up to 1380 m(2)/g, or a high N content of up to 11.1 wt%, as well as a high degree of graphitization and high conductivity (even higher than that of graphite). One of the carbons, which possesses a high surface area and a high content of pyridinic N, exhibits excellent electrocatalytic activity toward the oxygen reduction reaction in an alkaline medium, as revealed by an onset potential, half-wave potential, and kinetic current density comparable to those of commercial 20 wt% Pt/C. These low-cost and versatile precursors are expected to be important building blocks for CMs.

Concentration-induced spontaneous polymerization of protic ionic liquids for efficient in situ adhesion.

The advancement of contemporary adhesives is often limited by the balancing act between cohesion and interfacial adhesion strength. This study explores an approach to overcome this trade-off by utilizing the spontaneous polymerization of a protic ionic liquid-based monomer obtained through the neutralization of 2-acrylamide-2-methyl propane sulfonic acid and hydroxylamine. The initiator-free polymerization process is carried out through a gradual increase in monomer concentration in aqueous solutions caused by solvent evaporation upon heating, which results in the in-situ formation of a tough and thin adhesive layer with a highly entangled polymeric network and an intimate interface contact between the adhesive and substrate. The abundance of internal and external non-covalent interactions also contributes to both cohesion and interfacial adhesion. Consequently, the produced protic poly(ionic liquid)s exhibit considerable adhesion strength on a variety of substrates. This method also allows for the creation of advanced adhesive composites with electrical conductivity or visualized sensing functionality by incorporating commercially available fillers into the ionic liquid adhesive. This study provides a strategy for creating high-performance ionic liquid-based adhesives and highlights the importance of in-situ polymerization for constructing adhesive composites.

LCST ion gels fabricating "all-in-one" smart windows: thermotropic, electrochromic and power-generating.

Smart windows always respond to single stimuli, which cannot satisfy various needs in practical applications. Smart windows that integrate thermotropic, electrochromic and power-generating functions in one device is highly challenging yet important in satisfying on-demand light modulation and energy efficiency in practical applications. Herein, a thermoresponsive lower critical solution temperature (LCST) ion gel was fabricated via a facile in situ polymerization of butyl acrylate in a conventional ionic liquid to explore "all in one" smart windows. The ion gel-assembled smart windows are thermotropic and electrochromic with a reliable adjustment of light transparency as well as power-generating, enabled by the ionic Soret effect of ionic liquids. Additionally, the ion gels demonstrated self-defensive robust mechanical properties, thermal insulating and antifogging properties. With such an interdisciplinary and comprehensive study of the ion gels, the LCST ion gels could fulfil the requirements of genius windows with high energy-saving potential and exceptional climate adaptability, such as shut-down of light transmission in summer, daily solar energy collection, and colour changes on demand. It conceptually updates smart windows from an energy saving to an energy supplier in buildings. It is the first time to explore the "all in one" smart windows based on integrated multifunctional ionic liquids, which could greatly bridge the gap between the materials and buildings to accelerate practical applications of smart windows.

Hetero-Diatomic CoN4-NiN4 Site Pairs with Long-Range Coupling as Efficient Bifunctional Catalyst for Rechargeable Zn-Air Batteries.

In this study, Co/Ni-NC catalyst with hetero-diatomic Co/Ni active sites dispersed on nitrogen-doped carbon matrix is synthesized via the controlled pyrolysis of ZIF-8 containing Co2+ and Ni2+ compounds. Experimental characterizations and theoretical calculations reveal that Co and Ni are atomically and uniformly dispersed in pairs of CoN4-NiN4 with an intersite distance ≈0.41 nm, and there is long-range d-d coupling between Co and Ni with more electron delocalization for higher bifunctional activity. Besides, the in situ grown carbon nanotubes at the edges of the catalyst particles allow high electronic conductivity for electrocatalysis process. Electrochemical evaluations demonstrate the superior ORR and OER bifunctionality of Co/Ni-NC catalyst with a narrow potential gap of only 0.691 V and long-term durability, significantly prevailing over the single-atom Co-NC and Ni-NC catalysts and the benchmark Pt/C and RuO2 catalysts. Co/Ni-NC catalyzed Zn-air batteries achieve a high specific capacity of 771 mAh g-1 and a long continuous operation period up to 340 h with a small voltage gap of ≈0.65 V, also much superior to Pt/C-RuO2.

Adhesive Zwitterionic Poly(ionic liquid) with Unprecedented Organic Solvent Resistance.

The resistance of adhesives to organic solvents is of paramount importance in diverse industries. Unfortunately, many currently available adhesives exhibit either weak intermolecular chain interactions, resulting in insufficient resistance to organic solvents, or possess a permanent covalent crosslinked network, impeding recyclability. This study introduces an innovative approach to address this challenge by formulating zwitterionic poly(ionic liquid) (ZPIL) derivatives with robust dipole-dipole interactions, incorporating sulfonic anions and imidazolium cations. Due to its unique dynamic and electrostatic self-crosslinking structure, the ZPIL exhibits significant adhesion to various substrates and demonstrates excellent recyclability even after multiple adhesion tests. Significantly, ZPIL exhibits exceptional adhesion stability across diverse nonpolar and polar organic solvents, including ionic liquids, distinguishing itself from nonionic polymers and conventional poly(ionic liquid)s. Its adhesive performance remains minimally affected even after prolonged exposure to soaking conditions. The study presents a promising solution for the design of highly organic solvent-resistant materials for plastics, coatings, and adhesives.