RESUMEN
Carbon capture is one of the essential low-carbon technologies required to achieve societal climate goals at the lowest cost. Covalent organic frameworks (COFs) are promising adsorbents for CO2 capture because of their well-defined porosity, large surface area, and high stability. Current COF-based CO2 capture is mainly based on a physisorption mechanism, exhibiting smooth and reversible sorption isotherms. In the present study, we report unusual CO2 sorption isotherms featuring one or more tunable hysteresis steps with metal ion (Fe3+, Cr3+, or In3+)-doped Schiff-base two-dimensional (2D) COFs (Py-1P, Py-TT, and Py-Py) as adsorbents. Synchrotron X-ray diffraction, spectroscopic and computational studies indicate that the sharp adsorption steps in the isotherm originate from the insertion of CO2 between the metal ion and the N atom of the imine bond on the inner pore surface of the COFs as the CO2 pressure reaches threshold values. As a result, the CO2 adsorption capacity of the ion-doped Py-1P COF is increased by 89.5% compared with that of the undoped Py-1P COF. This CO2 sorption mechanism provides an efficient and straightforward approach to enhancing the CO2 capture capacity of COF-based adsorbents, yielding insights into developing chemistry for CO2 capture and conversion.
RESUMEN
Selective recognition of 1,3-butadiene from complex olefin isomers is vital for 1,3-butadiene purification, but the lack of porous materials with suitable pore structures results in poor selectivity and low capacity in C4 olefin separation. Herein, two sulfonate-functionalized organic frameworks, ZU-601 and ZU-602, are designed and show impressive separation performance toward C4 olefins. Benefiting from the suitable aperture size caused by the flexibility of coordinated organic ligand, ZU-601, ZU-602 that are pillared with different sulfonate anions could discriminate C4 olefin isomers with high uptake ratio: 1,3-butadiene/1-butene (207), 1,3-butadiene/trans-2-butene (10.1). Meanwhile, their layer-stacked structure enables the utilization of both intra- and interlayer space, enhancing the accommodation of guest molecules. ZU-601 exhibits record high 1,3-butadiene adsorption capacity of 2.90 mmol g-1 (0.5 bar, 298 K) among the reported flexible porous materials with high 1,3-butadiene/1-butene selectivity. The breakthrough experiments confirm their superior separation ability even for all five C4 olefin isomers, and the molecular-level structural change is well elucidated via powder, crystal analysis, and simulation studies. The work provides ideas toward advanced materials design with simultaneous high separation capacity and high separation selectivity for challenging separations.
RESUMEN
Covalent organic frameworks (COFs) are emerging crystalline porous polymers, showing great potential for applications but lacking gas-triggered flexibility. Atropisomerism was experimentally discovered in 1922 but has rarely been found in crystals with infinite framework structures. Here we report atropisomerism in COF single crystals. The obtained COF atropisomers, namely COF-320 and COF-320-A, have identical chemical and interpenetrated structures but differ in the spatial arrangement of repeating units. In contrast to the rigid COF-320 structure, its atropisomer (COF-320-A) exhibits unconventional gas sorption behaviours with one or more sorption steps in isotherms at different temperatures. Single-crystal structures determined from continuous rotation electron diffraction and in situ powder X-ray diffraction demonstrate that these adsorption steps originate from internal pore expansion with or without changing the crystal space group. COF-320-A recognizes different gases by expanding its internal pores continuously (crystal-to-amorphous transition) or discontinuously (crystal-to-crystal transition) or having mixed transition styles, distinguishing COF-320-A from existing soft/flexible porous crystals. These findings extend atropisomerism from molecules to crystals and propel COFs into the covalently linked soft porous crystal regime, further advancing applications of soft porous crystals in gas sorption, separation and storage.
RESUMEN
BACKGROUND: Insufficient or disrupted sleep increases the risk of cardiovascular disease, including atherosclerosis. However, we know little about the molecular mechanisms by which sleep modulates atherogenesis. This study aimed to explore the potential role of circulating exosomes in endothelial inflammation and atherogenesis under sleep deprivation status and the molecular mechanisms involved. METHODS: Circulating exosomes were isolated from the plasma of volunteers with or without sleep deprivation and mice subjected to 12-week sleep deprivation or control littermates. miRNA array was performed to determine changes in miRNA expression in circulating exosomes. RESULTS: Although the total circulating exosome levels did not change significantly, the isolated plasma exosomes from sleep-deprived mice or human were a potent inducer of endothelial inflammation and atherogenesis. Through profiling and functional analysis of the global microRNA in the exosomes, we found miR-182-5p is a key exosomal cargo that mediates the proinflammatory effects of exosomes by upregulation of MYD88 (myeloid differentiation factor 88) and activation of NF-ĸB (nuclear factor kappa-B)/NLRP3 pathway in endothelial cells. Moreover, sleep deprivation or the reduction of melatonin directly decreased the synthesis of miR-182-5p and led to the accumulation of reactive oxygen species in small intestinal epithelium. CONCLUSIONS: The findings illustrate an important role for circulating exosomes in distant communications, suggesting a new mechanism underlying the link between sleep disorder and cardiovascular disease.
Asunto(s)
Aterosclerosis , Enfermedades Cardiovasculares , Exosomas , MicroARNs , Humanos , Animales , Ratones , Células Endoteliales/metabolismo , Privación de Sueño/complicaciones , Privación de Sueño/genética , Privación de Sueño/metabolismo , Enfermedades Cardiovasculares/metabolismo , MicroARNs/metabolismo , Exosomas/genética , Exosomas/metabolismo , Inflamación/genética , Inflamación/metabolismo , Aterosclerosis/genética , Aterosclerosis/metabolismoRESUMEN
Several epidemiologic and toxicological studies have widely regarded that mitochondrial dysfunction is a popular molecular event in the process of silicosis from different perspectives, but the details have not been systematically summarized yet. Thus, it is necessary to investigate how silica dust leads to pulmonary fibrosis by damaging the mitochondria of macrophages. In this review, we first introduce the molecular mechanisms that silica dust induce mitochondrial morphological and functional abnormalities and then introduce the main molecular mechanisms that silica-damaged mitochondria induce pulmonary fibrosis. Finally, we conclude that the mitochondrial abnormalities of alveolar macrophages caused by silica dust are involved deeply in the pathogenesis of silicosis through these two sequential mechanisms. Therefore, reducing the silica-damaged mitochondria will prevent the potential occurrence and fatality of the disease in the future.
Asunto(s)
Fibrosis Pulmonar , Silicosis , Humanos , Fibrosis Pulmonar/metabolismo , Dióxido de Silicio/metabolismo , Macrófagos , Silicosis/metabolismo , Macrófagos Alveolares , Mitocondrias , PolvoRESUMEN
Prolonged exposure to environments with high concentrations of crystalline silica (CS) can lead to silicosis. Macrophages play a crucial role in the pathogenesis of silicosis. In the process of silicosis, silica (SiO2) invades alveolar macrophages (AMs) and induces mitophagy which usually exists in three states: normal, excessive, and/or deficiency. Different mitophagy states lead to corresponding toxic responses, including successful macrophage repair, injury, necrosis, apoptosis, and even pulmonary fibrosis. This is a complex process accompanied by various cytokines. Unfortunately, the details have not been fully systematically summarized. Therefore, it is necessary to elucidate the role of macrophage mitophagy in SiO2-induced pulmonary fibrosis by systematic analysis on the literature reports. In this review, we first summarized the current data on the macrophage mitophagy in the development of SiO2-induced pulmonary fibrosis. Then, we introduce the molecular mechanism on how SiO2-induced mitophagy causes pulmonary fibrosis. Finally, we focus on introducing new therapies based on newly developed mitophagy-inducing strategies. We conclude that macrophage mitophagy plays a multifaceted role in the progression of SiO2-induced pulmonary fibrosis, and reprogramming the macrophage mitophagy state accordingly may be a potential means of preventing and treating pulmonary fibrosis.
RESUMEN
Separating oxygen from air to create oxygen-enriched gas streams is a process that is significant in both industrial and medical fields. However, the prominent technologies for creating oxygen-enriched gas streams are both energy and infrastructure intensive as they use cryogenic temperatures or materials that adsorb N2 from air. The latter method is less efficient than the methods that adsorb O2 directly. Herein, we show, via a combination of gas adsorption isotherms, gas breakthrough experiments, neutron and synchrotron X-ray powder diffraction, Raman spectroscopy, and computational studies, that the metal-organic framework, Al(HCOO)3 (ALF), which is easily prepared at low cost from commodity chemicals, exhibits substantial O2 adsorption and excellent time-dependent O2/N2 selectivity in a range of 50-125 near dry ice/solvent (≈190 K) temperatures. The effective O2 adsorption with ALF at ≈190 K and ≈0.21 bar (the partial pressure of O2 in air) is ≈1.7 mmol/g, and at ice/salt temperatures (≈250 K), it is ≈0.3 mmol/g. Though the kinetics for full adsorption of O2 near 190 K are slower than at temperatures nearer 250 K, the kinetics for initial O2 adsorption are fast, suggesting that O2 separation using ALF with rapid temperature swings at ambient pressures is a potentially viable choice for low-cost air separation applications. We also present synthetic strategies for improving the kinetics of this family of compounds, namely, via Al/Fe solid solutions. To the best of our knowledge, ALF has the highest O2/N2 sorption selectivity among MOF adsorbents without open metal sites as verified by co-adsorption experiments..
RESUMEN
Membrane-based technologies can provide cost-effective and energy-efficient methods for various separation processes. The key goal is to develop materials with uniform, tunable, and well-defined subnanometer-scale channels. Suitable membrane materials should have high selectivity and permeance and can be manufactured in a robust and scalable fashion. Here, we report the construction of sub-1 nm intercrystalline channels with such characteristics and elucidate their transport properties. These channels are formed by assembling 3D aluminum formate crystals during the amorphous-to-crystalline transformation process. By controlling the transformation time, the channel size can be tuned from the macroscopic scale to nanometer scale. The resulting membranes exhibit tailored selectivity and permeance, with molecular weight cutoffs ranging from around 300 Da to approximately 650 Da, and ethanol permeance ranging from 0.8 to 22.0 L m-2 h-1 bar-1. We further show that liquid flow through these channels changes from viscosity-dominated continuum flow to subcontinuum flow, which can be described by a modified Hagen-Poiseuille model. Our strategy provides a new scalable platform for applications that commonly exploit nanoscale mass transport.
RESUMEN
Exclusive capture of carbon dioxide (CO2) from hydrocarbons via adsorptive separation is an important technology in the petrochemical industry, especially for acetylene (C2H2) production. However, the physicochemical similarities between CO2 and C2H2 hamper the development of CO2-preferential sorbents, and CO2 is mainly discerned via C recognition with low efficiency. Here, we report that the ultramicroporous material Al(HCOO)3, ALF, can exclusively capture CO2 from hydrocarbon mixtures, including those containing C2H2 and CH4. ALF shows a remarkable CO2 capacity of 86.2 cm3 g-1 and record-high CO2/C2H2 and CO2/CH4 uptake ratios. The inverse CO2/C2H2 separation and exclusive CO2 capture performance from hydrocarbons are validated via adsorption isotherms and dynamic breakthrough experiments. Notably, the hydrogen-confined pore cavities with appropriate dimensional size provide an ideal pore chemistry to specifically match CO2 via a hydrogen bonding mechanism, with all hydrocarbons rejected. This molecular recognition mechanism is unveiled by in situ Fourier-transform infrared spectroscopy, X-ray diffraction studies, and molecular simulations.
RESUMEN
OBJECTIVE: The objective of this systematic review and meta-analysis was to investigate the clinical significance of one-abutment at one-time protocol in healed posterior edentulism. METHODS: An online search was undertaken in November 2022, which included PubMed, Cochrane Library, Wiley Online Library, and Google Scholar in addition to manual searching. The Cochrane Collaboration tool was performed to assess the quality of selected articles. Marginal bone loss (MBL) was estimated by the performance of meta-analysis. Moreover, all the pooled analyses were based on random-effect models. Subgroup analysis was applied to evaluate the effects of different variables. RESULTS: In line with the inclusion criteria, 6 trials with 446 dental implants were identified. The meta-analysis showed a total of 0.22 mm less MBL within 6 months and decreased by 0.30 mm at 1-year follow-up in favor of one-abutment at one-time protocol. A significant loss MBL was found in implants placed equicrestally using one-abutment at one-time protocol [6 months: mean difference (MD): -0.22 mm; 95% CI, -0.34 to 0.10 mm, P =0.0004; 12 months: MD: -0.32 mm; 95% CI, -0.40 to -0.24 mm, P <0.00001), whereas no difference was found between 2 groups in an implant placed subscrestally (6 months: MD: 0.14 mm; 95% CI, -0.03 to 0.22 mm; P =0.11; 12 months: MD: -0.12 mm; 95% CI, -0.32 to 0.08 mm; P =0.23). CONCLUSIONS: Implant platform position might greatly affect the marginal bone level. Moreover, one-abutment at one-time protocol demonstrated better bone preservation in implants placed equicrestally in healed posterior edentulism. CLINICAL RELEVANCE: This study highlights the significant clinical application of one-abutment at one-time protocol in healed posterior edentulism.
Asunto(s)
Pérdida de Hueso Alveolar , Enfermedades Óseas Metabólicas , Implantes Dentales , Humanos , Implantación Dental Endoósea/métodosRESUMEN
Given the insufficient height of single-barrel fibula and inadequate bone volume of double-barrel vascularized fibula in mandibular reconstruction, it is a better choice to combine the upper full-thickness vascularized fibula with the lower half-thickness nonvascularized fibula. However, the nonvascularized fibula may fail due to complications, affecting the facial shape and occlusal function. Polyetheretherketone is a thermoplastic polymer used for bone defect reconstruction due to its good mechanical properties and biocompatibility. This case report mainly presents a secondary salvage reconstruction of the mandible by using customed 3-dimensional-printing polyetheretherketone, which restored the continuity and symmetry of the mandible, improved the patient's facial shape, and restored functional occlusion through dental implants. After a 28-month follow-up, no complications occurred, and the patient was satisfied with the final restoration.
Asunto(s)
Implantes Dentales , Neoplasias Mandibulares , Reconstrucción Mandibular , Humanos , Neoplasias Mandibulares/cirugía , Mandíbula/cirugía , Impresión Tridimensional , Peroné/cirugía , Trasplante ÓseoRESUMEN
Extracellular vesicles (EVs) are emerging as key players in intercellular communication. Few studies have focused on EV levels in subjects with sleep disorders. Here, we aimed to explore the role of acute sleep deprivation on the quantity and functionality of circulating EVs, and their tissue distribution. EVs were isolated by ultracentrifugation from the plasma of volunteers and animals undergoing one night of sleep deprivation. Arterio-venous shunt, FeCl3 thrombus test and thrombin-induced platelet aggregation assay were conducted to evaluate the in vivo and in vitro bioactivity of small EVs. Western blotting was performed to measure the expression of EV proteins. The fate and distribution of circulating small EVs were determined by intravital imaging. We found that one night of sleep deprivation triggers release of small EVs into the circulation in both healthy individuals and animals. Injection of sleep deprivation-liberated small EVs into animals increased thrombus formation and weight in thrombosis models. Also, sleep deprivation-liberated small EVs promoted platelet aggregation induced by thrombin. Mechanistically, sleep deprivation increased the levels of HMGB1 protein in small EVs, which play important roles in platelet activation. Furthermore, we found sleep deprivation-liberated small EVs are more readily localize in the liver. These data suggested that one night of sleep deprivation is a stress for small EV release, and small EVs released here may increase the risk of thrombosis. Further, small EVs may be implicated in long distance signalling during sleep deprivation-mediated adaptation processes.
Asunto(s)
Vesículas Extracelulares , Proteína HMGB1 , Trombosis , Animales , Vesículas Extracelulares/metabolismo , Proteína HMGB1/metabolismo , Activación Plaquetaria , Privación de Sueño , Trombina/metabolismoRESUMEN
Rational design of covalent organic frameworks (COFs) to broaden their diversity is highly desirable but challenging due to the limited, expensive, and complex building blocks, especially compared with other easily available porous materials. In this work, we fabricated two novel bioinspired COFs, namely, NUS-71 and NUS-72, using reticular chemistry with ellagic acid and triboronic acid-based building blocks. Both COFs with AB stacking mode exhibit high acetylene (C2H2) adsorption capacity and excellent separation performance for C2H2/CO2 mixtures, which is significant but rarely explored using COFs. The impressive affinities for C2H2 appear to be related to the sandwich structure formed by C2H2 and the host framework via multiple host-guest interactions. This work not only represents a new avenue for the construction of low-cost COFs but also expands the variety of the COF family using natural biochemicals as building blocks for broad application.
Asunto(s)
Estructuras Metalorgánicas , Acetileno , Adsorción , Dióxido de Carbono/química , Estructuras Metalorgánicas/química , PorosidadRESUMEN
Two-dimensional covalent organic frameworks (2D COFs) have been widely viewed as rigid porous materials with smooth and reversible gas sorption isotherms. In the present study, we report an unusual hysteresis step in the CO2 adsorption isotherm of a 2D COF, TAPB-OMeTA. In situ powder X-ray diffraction (PXRD) measurements, computational modeling, and Pawley refinement indicate that TAPB-OMeTA experiences slight interlayer shifting during the CO2 adsorption process, resulting in a new structure that is similar but not identical to the AA stacking structure, namely, a quasi-AA stacking structure. This interlayer shifting is responsible for the step in its CO2 adsorption isotherm. We attribute the interlayer shifting to the interactions between COF and CO2, which weaken the attraction strength between adjacent COF layers. Notably, the repulsion force between the methoxy groups on the backbone of TAPB-OMeTA is essential in facilitating the interlayer shifting process. After further increasing the size of side groups by grafting poly(N-isopropylacrylamide) oligomers to the TAPB-OMeTA backbone via surface-initiated atom transfer radical polymerization (SI-ATRP), we observed a second interlayer shifting and two adsorption steps in the CO2 adsorption isotherm, suggesting tunability of the interlayer shifting process. Density functional theory (DFT) calculations confirm that the quasi-AA stacking structure is energetically preferred over AA stacking under a CO2 atmosphere. These findings demonstrate that 2D COFs can be "soft" porous materials when interacting with gases, providing new opportunities for 2D COFs in gas storage and separation.
RESUMEN
Covalent organic frameworks (COFs) have found wide applications due to their crystalline structures. However, it is still challenging to quantify crystalline phases in a COF sample. This is because COFs, especially 2D ones, are usually obtained as mixtures of polycrystalline powders. Therefore, the understanding of the aggregated structures of 2D COFs is of significant importance for their efficient utilization. Here we report the study of the aggregated structures of 2D COFs using 13C solid-state nuclear magnetic resonance (13C SSNMR). We find that 13C SSNMR can distinguish different aggregated structures in a 2D COF because COF layer stacking creates confined spaces that enable intimate interactions between atoms/groups from adjacent layers. Subsequently, the chemical environments of these atoms/groups are changed compared with those of the nonstacking structures. Such a change in the chemical environment is significant enough to be captured by 13C SSNMR. After analyzing four 2D COFs, we find it particularly useful for 13C SSNMR to quantitatively distinguish the AA stacking structure from other aggregated structures. Additionally, 13C SSNMR data suggest the existence of offset stacking structures in 2D COFs. These offset stacking structures are not long-range-ordered and are eluded from X-ray-based detections, and thus they have not been reported before. In addition to the dried state, the aggregated structures of solvated 2D COFs are also studied by 13C SSNMR, showing that 2D COFs have different aggregated structures in dried versus solvated states. These results represent the first quantitative study on the aggregated structures of 2D COFs, deepen our understanding of the structures of 2D COFs, and further their applications.
RESUMEN
BACKGROUND: Mesenchymal stem cells (MSCs) exhibit two bidirectional immunomodulatory abilities: proinflammatory and anti-inflammatory regulatory effects. Long noncoding RNAs (lncRNAs) have important functions in the immune system. Previously, we performed high-throughput sequencing comparing lncRNA expression profiles between MSCs cocultured with or without CD14+ monocytes and screened out a new lncRNA termed lncRNA MCP1 regulatory factor (MRF). However, the mechanism of MRF in MSCs is still unknown. METHODS: MRF expression was quantified via qRT-PCR. RNA interference and lentiviruses were used to regulate MRF expression. The immunomodulatory effects of MSCs on monocytes were evaluated via monocyte migration and macrophage polarization assays. RNA pull-down and mass spectrometry were utilized to identify downstream factors of MRF. A dual-luciferase reporter assay was applied to analyze the transcription factors regulating MRF. qRT-PCR, western blotting and ELISAs were used to assess MCP1 expression. A human monocyte adoptive transfer mouse model was applied to verify the function of MRF in vivo. RESULTS: MRF was upregulated in MSCs during coculture with CD14+ monocytes. MRF increased monocyte recruitment by upregulating the expression of monocyte chemotactic protein (MCP1). Knockdown of MRF enhanced the regulatory effect of MSCs on restraining M1 polarization and facilitating M2 polarization. Mechanistically, MRF bound to the downstream protein heterogeneous nuclear ribonucleoprotein D (HNRNPD) to upregulate MCP1 expression, and the transcription factor interferon regulatory factor 1 (IRF1) activated MRF transcription early during coculture. The human monocyte adoptive transfer model showed that MRF downregulation in MSCs inhibited monocyte chemotaxis and enhanced the effects of MSCs to inhibit M1 macrophage polarization and promote M2 polarization in vivo. CONCLUSION: We identified the new lncRNA MRF, which exhibits proinflammatory characteristics. MRF regulates the ability of MSCs to accelerate monocyte recruitment and modulate macrophage polarization through the HNRNPD-MCP1 axis and initiates the proinflammatory regulatory process in MSCs, suggesting that MRF is a potential target to improve the clinical effect of MSC-based therapy or correct MSC-related immunomodulatory dysfunction under pathological conditions.
Asunto(s)
Ribonucleoproteína Heterogénea-Nuclear Grupo D , Células Madre Mesenquimatosas , ARN Largo no Codificante , Animales , Antiinflamatorios/farmacología , Ribonucleoproteína Heterogénea-Nuclear Grupo D/metabolismo , Ribonucleoproteína Heterogénea-Nuclear Grupo D/farmacología , Humanos , Factor 1 Regulador del Interferón/metabolismo , Factor 1 Regulador del Interferón/farmacología , Células Madre Mesenquimatosas/metabolismo , Ratones , Proteínas Quimioatrayentes de Monocitos/metabolismo , Proteínas Quimioatrayentes de Monocitos/farmacología , Monocitos/metabolismo , ARN Largo no Codificante/metabolismoRESUMEN
OBJECTIVES: Improper orthodontic force often causes root resorption or destructive bone resorption. There is evidence that T helper 17 (Th17) cells and regulatory T (Treg) cells may be actively involved in bone remodeling during tooth movement. In a combination of in vitro and in vivo studies, we investigated the effect of human periodontal ligament cells (hPDLCs) on Th17/Treg cells under different orthodontic forces and corticotomy. MATERIAL AND METHODS: hPDLCs were cultured in vitro and subjected to different mechanical forces. The expression of interleukin (IL)-6 and transforming growth factor (TGF)-ß in the supernatant and the mRNA levels of hypoxia inducible factor (HIF)-1α, Notch1, and TGF-ß in hPDLCs were investigated. Supernatants were collected and co-cultured with activated CD4+T cells, and the differentiation of Th17/Treg cells was analyzed by flow cytometry. We also established an animal model of tooth movement with or without corticotomy. The tooth movement distance, alveolar bone height, and root resorption were analyzed using micro-computed tomography. Expression of interleukin (IL)-17A, forkhead Box P3 (Foxp3), and IL-6 were analyzed using immunohistochemistry, while osteoclasts were evaluated by tartrate-resistant acid phosphatase (TRAP) staining. The mRNA levels of IL-17A, IL-6, Foxp3, IL-10, HIF-1α, notch1, and C-X-C motif chemokine ligand 12 (CXCL12) in alveolar bone and gingiva were investigated. RESULTS: Heavy force repressed cell viability and increased the mortality rate of hPDLCs; it also improved the expression of IL-6, declined the expression of TGF-ß, and promoted the mRNA expression level of HIF-1α. The expression of TGF-ß and Notch1 mRNA decreased and then increased. The supernatant of hPDLCs under heavy force promotes the polarization of Th17 cells. The heavy force caused root resorption and decreased alveolar bone height and increased the positive area of IL-17A immunohistochemical staining and the expression of IL-17A, IL-6, HIF-1α, and Notch1 mRNA. Corticotomy accelerated tooth movement, increased the proportion of Foxp3-positive cells, and up-regulated the expression of Foxp3, IL-10, and CXCL12 mRNA. CONCLUSIONS: During orthodontic tooth movement, the heavy force causes root resorption and inflammatory bone destruction, which could be associated with increased expression of Th17 cells and IL-6. Corticotomy can accelerate tooth movement without causing root resorption and periodontal bone loss, which may be related to the increased expression of Treg cells. CLINICAL RELEVANCE: Altogether, this report provides a new perspective on the prevention of inflammatory injury via the regulation of Th17/Treg cells in orthodontics.
Asunto(s)
Pérdida de Hueso Alveolar , Linfocitos T Reguladores , Pérdida de Hueso Alveolar/prevención & control , Animales , Diferenciación Celular , Homeostasis , Ligamento Periodontal , Linfocitos T Reguladores/metabolismo , Células Th17/metabolismo , Técnicas de Movimiento Dental , Microtomografía por Rayos XRESUMEN
Alveolar macrophages play a vital role in the development of acute silicosis, but the dynamic changes of M1 and/or M2 phenotypes have not been elucidated. In this study, acute silicosis models of rat were established by a one-time dusting method, and the rats were sacrificed after 1, 3, 7, 14, and 28 days. The polarity states of macrophages were assessed by measuring the M1/M2 marker genes of alveolar macrophages and the M1/M2 marker proteins in bronchoalveolar lavage fluid. The pathological changes of lung tissues were examined with hematoxylin and Eosin and Masson's trichrome staining. Our results showed that in the early stages, alveolar macrophages were mainly polarized into M1; with time, the polarization of M2 gradually became dominant. Microscopic sections showed significant pathological responses of inflammation and fibrosis. This work suggested that the alteration of alveolar macrophage polarization was involved in the lung pathologic responses to acute silicosis.
Asunto(s)
Macrófagos Alveolares , Silicosis , Ratas , Animales , Macrófagos , Inflamación , Líquido del Lavado BronquioalveolarRESUMEN
ABSTRACT: The aim of this study is to evaluate the technique of surgical guide in the extraction of impacted supernumerary mandibular premolars. This case series included 5 patients. Impacted supernumerary mandibular premolars were removed through a lateral window approach using the surgical guides. The mental nerve and adjacent teeth were properly protected by our custom made surgical guides. All cases successfully underwent the operation. An average of 5.01 ± 1.10 min was required to locate the supernumerary mandibular premolar. There were no complications involving injury to the mental nerve injury or adjacent teeth in any case. The application of custom-made surgical guides in the extraction of impacted supernumerary mandibular premolars showed an acceptable clinical outcome in this case series.
Asunto(s)
Diente Impactado , Diente Supernumerario , Diente Premolar/cirugía , Humanos , Mandíbula/cirugía , Extracción Dental , Diente Impactado/complicaciones , Diente Impactado/diagnóstico por imagen , Diente Impactado/cirugía , Diente Supernumerario/cirugíaRESUMEN
The paranasal area is closely associated with midfacial esthetics. However, there is no special technique available to achieve ideal esthetics paranasal restoration. The present study aims to apply the 3D printed PolyEtherEtherKetone (PEEK) implants as an innovative solution for esthetic paranasal reconstruction. On the basis of the CT scan, the patient-specific PEEK implant and a surgical guiding plate were manufactured aided by a computer. Preoperative and postoperative CBCT data were utilized to evaluate esthetic outcomes. The average follow-up period was 13 months. All patients' wounds healed by first intention. The statistical analysis of preoperative and postoperative esthetic indices revealed light levels of postoperative paranasal depression ( P <0.001) and the wrinkle severity rating scale for nasolabial folds ( P <0.001). Moreover, the nasolabial angle increased ( P <0.05). The established 3D-printing PEEK implanted prosthesis can individually correct the depressed deformity of the paranasal region, and achieve favorable clinical esthetic outcomes.