RESUMEN
The reliability of the space-to-Earth laser communication plays a crucial role in providing uninterrupted real-time services in satellite optical networks. In traditional satellite optical networks, the space-to-Earth laser communication is carried out using a monolithic satellite in close proximity to the target optical ground station. However, the reliability of the communication in this approach is heavily influenced by the atmospheric environment. For instance, variations in cloud thickness can cause fluctuations in the link quality of the space-to-Earth laser communication, significantly reducing its reliability. This study proposes an innovative channel-adaptive space-to-Earth laser communication (CA-S2E-LC) architecture based on satellite cluster optical networking (SCON). SCON provides space-diversity link sets, reducing the probability of space-to-Earth laser communications affected by clouds. By leveraging the perception of link quality, the CA-S2E-LC architecture can adaptively choose the better space-to-Earth laser communication links established by member satellites within a satellite cluster under different environments, and properly schedule the resource, ensuring reliable space-to-Earth laser communication. The principles of the SCON is analyzed and the implementation of the CA-S2E-LC architecture is demonstrated through the explanation of hardware and functional modules, workflows, finite state machines, and strategies. Simulation results demonstrate that the CA-S2E-LC architecture can significantly enhance communication reliability and capacity compared with the traditional monolithic satellite. Furthermore, the workflow of the architecture is demonstrated to validate the feasibility.
RESUMEN
Microcomb generation in the normal-dispersion region usually requires specially designed microresonators with mode interactions, increasing the complexity of device design and control. Here we demonstrate a novel, to the best of our knowledge, scheme of frequency comb generation by bidirectionally pumping an ordinary normal-dispersion microresonator. The cross-phase modulation from the counter-propagating light reshapes the cavity response, facilitating the emergence of modulational instability for comb initiation. By properly adjusting the pump power ratio and frequency detuning in two directions, frequency combs can be formed at any pumped resonance. The proposed method provides a universal pathway to flexible microcomb generation in the normal-dispersion regime.
RESUMEN
We proposed an arbitrary waveform generator based on a 1-bit photonic digital-to-analog conversion (PDAC). The system is based on the principle of photonic pulse sampling and time interleaving. High-speed optical pulses are generated and modulated by digital signals and then synthesized in one path. The analog signals are obtained by an optical-to-electrical conversion of the time-interleaved pulses. Due to the 1-bit structure, there are no spurious components in principle. In the experiment, a 1-bit PDAC of 50â GSa/s is realized, and the X-band linear frequency-modulated (LFM) waveform with a bandwidth of 4â GHz is generated, the signal-to-spur-rejection ratio is as high as 50â dB, and the millimeter-wave 64QAM signal is generated, with an EVM of 4.27%.
RESUMEN
In this study, we investigated the effects of Cu doping on the performance of CoFeSiB amorphous microwires as the core of a fluxgate magnetometer. The noise performance of fluxgate sensors primarily depends on the crystal structure of constituent materials. CoFeSiB amorphous microwires with varying Cu doping ratios were prepared using melt-extraction technology. The microstructure of microwire configurations was observed using transmission electron microscopy, and the growth of nanocrystalline was examined. Additionally, the magnetic performance of the microwire and the noise of the magnetic fluxgate sensors were tested to establish the relationship between Cu-doped CoFeSiB amorphous wires and sensor noise performance. The results indicated that Cu doping triggers a positive mixing enthalpy and the reduced difference in the atomic radius that enhances the degree of nanocrystalline formation within the system; differential scanning calorimetry analysis indicates that this is due to Cu doping reducing the glass formation capacity of the system. In addition, Cu doping affects the soft magnetic properties of amorphous microwires, with 1% low-doping samples exhibiting better soft magnetic properties. This phenomenon is likely the result of the interaction between nanocrystalline organization and magnetic domains. Furthermore, a Cu doping ratio of 1% yields the best noise performance, aligning with the trend observed in the material's magnetic properties. Therefore, to reduce the noise of the CoFeSiB amorphous wire sensor, the primary goal should be to reduce microscopic defects in amorphous alloys and enhance soft magnetic properties. Cu doping is a superior preparation method which facilitates control over preparation conditions, ensuring the formation of stable amorphous wires with consistent performance.
RESUMEN
This paper reports a correction scheme to address the problem of modulation nonlinearity and optical switch crosstalk simultaneously for the multi-site optical converged network. Based on the optical link encoding and exclusive-or operation for the received signal, the present spectrum usage can be obtained among the confusion with interferences containing the modulated harmonic distortion and the crosstalk leakage from other sites. The proof-of-concept experiment is performed on various interferences involving the linear frequency modulated (LFM) waveform and the quadrature amplitude modulation (QAM) signal. The corrected spectrum has realized an improved signal-to-noise ratio (SNR) of over 22â dB compared to the uncorrected counterpart. Furthermore, it consistently maintains a superior SNR, surpassing the single impairment-corrected scenario by an impressive margin of at least 15.9â dB. Besides, the implementation would not introduce additional noise, making the corrected result agree well with the ideal case. Without any increase in hardware complexity, the presented scheme provides an effective technique to meet the correction challenge of large-scale and complicated optical networks with multiple optoelectronic devices.
RESUMEN
Imperfect optoelectronic devices deteriorate the performance of microwave photonic (MWP) systems and then hinder further practical application. This paper proposes a result-oriented lumped error correction to address the problem in the photonic-assisted broadband phased array. Herein, we focus on the evolution of the ultimate output resulting from various errors due to the nonideality of components. By establishing the static calibration base set (CBS) with tangent line approximation, the correction procedure is simplified, and the output degradation is greatly improved. Experimental results show the effective number of bits (ENOB) at the final output has been enhanced from 2.5 to 6.1. Further, double objectives optimization and imaging correction are demonstrated experimentally. The range resolution has been boosted from 3.9â cm to 2.4â cm, and the quality of the inverse synthetic aperture radar (ISAR) images is improved using the proposed method.
RESUMEN
Microresonator-based optical frequency combs have been greatly developed in the last decade and have shown great potential for many applications. A dual-comb scheme is usually required for lidar ranging, spectroscopy, spectrometer and microwave photonic channelizer. However, dual-comb generation with microresonators would require doubled hardware resources and more complex feedback control. Here we propose a novel scheme for dual-comb generation with a single laser diode self-injection locked to a single microresonator. The output of the laser diode is split and pumps the microresonator in clockwise and counter-clockwise directions. The scheme is investigated intensely through numerical simulations based on a set of coupled Lugiato-Lefever equations. Turnkey counter-propagating single soliton generation and repetition rate tuning are demonstrated.
RESUMEN
We propose an ultra-wideband photonic compressive receiver based on random codes shifting with image-frequency distinction. By shifting the center frequencies of two random codes in large frequency range, the receiving bandwidth is flexibly expanded. Simultaneously, the center frequencies of two random codes are slightly different. This difference is used to distinguish the "fixed" true RF signal from the differently located image-frequency signal. Based on this idea, our system solves the problem of limited receiving bandwidth of existing photonic compressive receivers. In the experiments, with two channels of only 780-MHz outputs, the sensing capability in the range of 11-41â GHz has been demonstrated. A multi-tone spectrum and a sparse radar-communication spectrum, composed of a linear frequency modulated (LFM) signal, a quadrature phase-shift keying (QPSK) signal and a single-tone signal, are both recovered.
RESUMEN
Photonic digital-to-analog converters (PDACs) with segmented design can achieve better performance than conventional binary PDACs in terms of effective number of bits (ENOB) and spurious-free dynamic range (SFDR). However, segmented PDACs generally require an increased amount of laser sources. Here, a structure of bipolar segmented PDAC based on laser wavelength multiplexing and balanced detection is proposed. The number of lasers is reduced by a half compared to a conventional segmented design with the same nominal resolution. Moreover, ideal bipolar output with no direct-current bias can be achieved with balanced detection. A proof-of-concept setup with a sampling rate of 10â GSa/s is constructed by employing only four lasers. The PDAC consists of four unary weighted channels and four ternary weighted channels. The measured ENOB and SFDR are 4.6â bits and 37.0â dBc, respectively. Generation of high-quality linear frequency-modulated radar waveforms with an instantaneous bandwidth of 4â GHz is also demonstrated.
RESUMEN
BACKGROUND & AIMS: Human neutrophil peptides (HNP)-1, -2 and -3 are the most abundant proteins in neutrophil azurophilic granules and are rapidly released via neutrophil degranulation upon activation. The aims of our study were to assess the role of HNP1-3 as biomarkers of disease severity in patients with decompensated cirrhosis and their value in predicting short-term mortality. METHODS: In this study, 451 patients with acutely decompensated cirrhosis (AD) were enrolled at the two medical centres. Overall, 281 patients were enrolled as the training cohort from October 2015 to April 2019, and 170 patients were enrolled as the validation cohort from June 2020 to February 2021. Plasma HNP1-3 levels were measured using enzyme-linked immunosorbent assay (ELISA). RESULTS: Plasma HNP1-3 increased stepwise with disease severity (compensated cirrhosis: 0.3 (0.2-0.4); AD without acute-on-chronic liver failure (ACLF): 1.9 (1.3-4.8); ACLF-1: 2.3 (1.8-6.1); ACLF-2: 5.6 (2.9-12.3); ACLF-3: 10.3 (5.7-17.2) ng/ml). From the multivariate Cox regression analysis, HNP1-3 emerged as independent predictors of mortality at 30 and 90 days. Similar results were observed in the subgroup analysis. On ROC analysis, plasma HNP1-3 showed better predictive accuracy for 30- and 90-day mortality (area under the receiver operating characteristic (AUROC) of 0.850 and 0.885, respectively) than the neutrophil-to-lymphocyte ratio (NLR) and similar accuracy as end-stage liver disease (MELD: 0.881 and 0.874) and chronic liver failure-sequential organ failure (CLIF-SOFA: 0.887 and 0.878). CONCLUSIONS: Plasma HNP1-3 levels were closely associated with disease severity and might be used to identify patients with AD at high risk of short-term mortality.
Asunto(s)
Insuficiencia Hepática Crónica Agudizada , Enfermedad Hepática en Estado Terminal , Humanos , Pronóstico , Neutrófilos , Biomarcadores , Cirrosis Hepática/complicaciones , Gravedad del Paciente , Péptidos , Índice de Severidad de la EnfermedadRESUMEN
Seminoma is the most common type of testicular germ cell tumour and is highly sensitive to cisplatin therapy, which has not been fully elucidated. In this study, we comprehensively monitored dynamic changes of TCam-2 cells after cisplatin treatment. At an early stage, we found that both low and high concentrations of cisplatin induced the S-phase arrest in TCam-2 cells. By contrast, the G0G1 arrest was caused by cisplatin in teratoma NTERA-2 cells. Afterwards, high concentrations of cisplatin promoted the extrinsic apoptosis and high expressions of related genes (Fas/FasL-caspase-8/-3) in TCam-2 cells. However, when decreasing the cisplatin, the apoptotic cells were significantly reduced, and accompanied by cells showing senescence-like morphology, positive SA-ß-gal staining and up-regulation of senescence-related genes (p53, p21 and p16). Furthermore, the cell cycle analysis revealed that most of the senescent TCam-2 cells were irreversibly arrested in the G2M phase. G2M arrest was also observed in NTERA-2 cells treated with a low concentration of cisplatin, while no senescence-related phenotype was discovered. In addition, we detected the γ-H2AX, a DNA damage marker protein, and reactive oxygen species (ROS) and found both of which were elevated with the increase of cisplatin in TCam-2 cells. In conclusion, the extrinsic apoptosis and senescence are involved in the growth kinetics of TCam-2 cells to cisplatin, which provide some implications for studies on cisplatin and seminoma.
Asunto(s)
Seminoma , Neoplasias Testiculares , Humanos , Masculino , Cisplatino/farmacología , Seminoma/tratamiento farmacológico , Seminoma/genética , Seminoma/metabolismo , Neoplasias Testiculares/tratamiento farmacológico , Neoplasias Testiculares/genética , Neoplasias Testiculares/metabolismo , Transducción de Señal , Apoptosis , Línea Celular Tumoral , Senescencia CelularRESUMEN
Conceivably, like other forms of acute kidney injury, cadmium-induced renal injury may also be associated with oxidative stress and various forms of cell death, including necroptosis, a form of regulated necrosis-associated cell death. Myo-inositol oxygenase (MIOX), an enzyme localized in renal proximal tubules, regulates oxidative stress and programmed cell death in various forms of renal injuries. Herein, the role and potential mechanism(s) by which MIOX potentiates cadmium-induced renal tubular damage were investigated. Overexpression of MIOX exacerbated cadmium-induced cell death and proximal tubular injury in mice, whereas MIOX gene disruption attenuated cellular damage in vitro and in vivo. Furthermore, necroptosis was observed in the renal tubular compartment, and, more importantly, it was corroborated by inhibitor experiments with necrostatin-1 (Nec-1). Coadministration of Nec-1 dampened including receptor-interacting protein kinase (RIP)1/RIP3/mixed-lineage kinase domain-like signaling, which is relevant to the process of necroptosis. Interestingly, the necroptosis induced by cadmium in tubules was modulated by MIOX expression profile. Also, the increased reactive oxygen species generation and NADPH consumption were accelerated by MIOX overexpression, and they were mitigated by Nec-1 administration. These findings suggest that MIOX-potentiated redox injury and necroptosis are intricately involved in the pathogenesis of cadmium-induced nephropathy, and this may yield novel potential therapeutic targets for amelioration of cadmium-induced kidney injury.NEW & NOTEWORTHY This is a seminal article documenting the role of myo-inositol oxygenase (MIOX), a renal proximal tubule-specific enzyme, in the exacerbation of cadmium-induced acute kidney injury by perturbing redox balance and inducing necroptosis. MIOX gene disruption or administration of necrostatin-1 (a necroptosis inhibitor) diminished cadmium-induced renal damage, in both in vitro and in vivo systems, suggesting a therapeutic potential of MIOX to attenuate necroptosis and relevant signaling pathways in cadmium-induced renal injury.
Asunto(s)
Lesión Renal Aguda , Inositol-Oxigenasa , Lesión Renal Aguda/inducido químicamente , Lesión Renal Aguda/genética , Lesión Renal Aguda/metabolismo , Animales , Cadmio/metabolismo , Cadmio/toxicidad , Femenino , Humanos , Inositol-Oxigenasa/genética , Inositol-Oxigenasa/metabolismo , Riñón/metabolismo , Masculino , Ratones , Necroptosis , OxidantesRESUMEN
Non-line-of-sight (NLOS) imaging has aroused great interest during the past few years, by providing a unique solution for the observation of hidden objects behind obstructions or scattering media. As such, NLOS imaging may facilitate broad applications in autonomous driving, remote sensing, and medical diagnosis. However, existing NLOS frameworks suffer from severe degradation of resolution and signal-to-noise ratio (SNR) due to aberrations induced by scattering media and system misalignment, restricting its practical applications. This paper proposes a computational adaptive optics (CAO) method for NLOS imaging to correct optical aberrations in post-processing without the requirement of any hardware modifications. We demonstrate the effectiveness of CAO with a confocal NLOS imaging system in Terahertz (THz) band by imaging different samples behind occlusions for both low- and high-order aberrations. With appropriate metrics used for iterative CAO in post-processing, both the resolution and SNR can be increased by several times without reducing the data acquisition speed.
RESUMEN
In this paper, a broadband photonic beam processor is presented for the all-optical multifunction integrated receiver. By implementing echo signals with optical beam multi-domain processing based on space-to-time mapping and time-to-frequency mapping, the non-mechanical control of expected beam pointing is enabled while the target within the beam can be imaged simultaneously. A proof-of-concept experiment with a 4-element phased array is performed in Ka band. The beam pointing is set to be 0° and 12.5°, where two-dimensional images of moving targets inside the beam region are obtained, respectively. The suppression ratio to the beam region outside is measured to be 26.8â dB. And the range and cross-range imaging resolution is 0.042 m × 0.051 m. A comparison with a cascade mode of single-function microwave photonic modules shows that the multifunction integrated photonic beam processor has reduced the system loss by 32.4â dB. The proposed beam processor enables multi-element broadband phased arrays with less complexity and power consumption.
RESUMEN
Existing photonic compressive receivers have the problem of resolution deterioration when applied in wide-range radar detection. In this study, we propose a photonic-assisted space-frequency two-dimensional (2D) compressive radar receiver capable of achieving high-resolution detection in wide-range scenarios. For the space dimension, the compression process is realized by employing a spatially adaptive photonic projection basis, which guarantees complete mapping of arbitrarily delayed echoes-the key to high-resolution wide-range detection. For the frequency dimension, photonic compressive sensing is employed to further compress the bandwidth of the projected sparse signal. Therefore, the proposed system can achieve wide-range radar detection without resolution deterioration with compressed output. Herein, with two channels of 630 MHz outputs, high-resolution distance detection within a range of 21 km with a resolution of up to 2.3 cm is achieved. Moreover, inverse synthetic aperture radar (ISAR) imaging of two sets of four-point turntables distributed within the range of 21 km with a resolution of 2.3 cm × 5.7 cm is realized. The proposed photonic-assisted 2D compressive radar receiver is a viable solution to overcome the tradeoff between detection resolution and range of existing photonic compressive receivers, which indicates a path for the further development of high-resolution wide-range radar detection.
RESUMEN
In this paper, we proposed a tunable K/W-band OFDM integrated radar and communication system based on Optoelectronic Oscillator (OEO) for intelligent transportation. All-optical signal processing including amplitude asymmetric filtering and quadratic phase manipulating is applied in OEO to achieve a high-frequency and tunable self-excited oscillation, which supports the K/W-band OFDM signal generation. Its product of maximum detection range and communication capacity is cB/4Δf (m·Gbaud), where c is light speed and Δf is subcarrier spacing of OFDM. A proof-of-concept experiment is carried out in K-band with bandwidth B = 2 GHz and W-band with bandwidth B = 10 GHz. The range resolution ΔR, detection range Rmax and communication capacity C of 0.075 m, 75 m, 12.8 Gbps, and 0.015 m, 300 m, 32 Gbps are experimentally demonstrated in K/W-band respectively.
RESUMEN
In this paper, we propose and demonstrate a novel spectrum stitching method for broadband linear frequency-modulated waveform (LFMW) generation. An optical frequency comb (OFC) is modulated by a narrowband LFMW whose bandwidth matches the free spectral range of the OFC. Optical injection locking is employed in extracting one broadband frequency sweeping component from the modulated OFC. In this way, seamless spectrum stitching is realized and a broadband LFMW with a multi-fold time-bandwidth product (TBWP) is obtained. Our scheme has a simple structure, which requires only a single OFC, a modulation module and a baseband waveform generator. An LFMW as broad as 20 GHz is generated from a baseband LFMW with 2GHz bandwidth experimentally. The TBWP is 100 times as large as that of the baseband LFMW. Moreover, the power fluctuation and the phase jumps are both eliminated, ensuring an excellent pulse compression performance. Benefiting from the injection locking technique, the linearity reaches 2.0 × 10-6. The central frequency tuning ability of our scheme is also demonstrated.
RESUMEN
All-dielectric, phase-gradient metasurfaces manipulate light via a judiciously designed planar distribution of high and low refractive indices. In the established design approaches, the high-index elements play a dominant role, while the electromagnetic field existing between these elements is routinely viewed as either an incidental by-product or detrimental crosstalk. Here we propose an alternative approach that concentrates on exploring the low-index materials for wavefront shaping. In our Si metasurface, the low-index air gap between adjacent Si fins is judiciously tuned, while the high-index Si fins only have a single size across the whole metasurface. These gap modes provide the full 2π phase coverage, as well as high and relatively uniform transmission, at the deep-subwavelength scale. These characteristics are ideal for mapping a steep phase gradient, consequently suitable for high-efficiency and large-angle wavefront bending. This light manipulation capability is exemplified with numerical simulation in PW-SW (freely propagating wave to surface wave) conversion, where the wavefront is deflected by an angle of 90°. In the gap-mode meta-converters, the average unit size can be only 1/60 of free-space wavelength, an order of magnitude smaller than that of conventional all-dielectric metasurfaces. Their conversion efficiency can reach 68%, the highest value reported for any all-dielectric gradient metasurface THz converter.
RESUMEN
We propose a microwave photonic 2D time-frequency filter based on a photonic time-frequency prism. A time-varying frequency response is realized by deviating the passband of a 1D ordinary frequency filter in the 2D time-frequency plane. The proposed time-frequency filter features highly reconfigurable frequency-sweeping speed and bandwidth, thanks to the software-defined photonic time-frequency prism. With the proposed technique, separation of multiple linear and nonlinear chirp signals with overlapped spectra is experimentally demonstrated.
RESUMEN
A novel, to the best of our knowledge, scheme for reconfigurable radar signal generation is proposed based on the principle of photonic phase-quantized digital-to-analog conversion. Multi-level digital phase modulation with different modulation depths is combined to convert multi-channel digital data to the phase of an optical carrier. Frequency-modulated or phase-modulated radar signals are generated by beating the phase-synthesized optical carrier with a coherent reference light. The proposed radar signal generator features a simple structure, highly reconfigurable modulation format, and flexibly tunable frequency. A 3-bit photonic phase-quantized digital-to-analog converter with a 10-GSa/s sampling rate is constructed experimentally. The generation of linear frequency-modulated, nonlinear frequency-modulated, frequency-stepped, frequency-hopping, binary phase-coded, and polyphase-coded waveforms is demonstrated.