Differential regulation of transcription factor T-bet induction during NK cell development and T helper-1 cell differentiation.

Adaptive CD4+ T helper cells and their innate counterparts, innate lymphoid cells, utilize an identical set of transcription factors (TFs) for their differentiation and functions. However, similarities and differences in the induction of these TFs in related lymphocytes are still elusive. Here, we show that T helper-1 (Th1) cells and natural killer (NK) cells displayed distinct epigenomes at the Tbx21 locus, which encodes T-bet, a critical TF for regulating type 1 immune responses. The initial induction of T-bet in NK precursors was dependent on the NK-specific DNase I hypersensitive site Tbx21-CNS-3, and the expression of the interleukin-18 (IL-18) receptor; IL-18 induced T-bet expression through the transcription factor RUNX3, which bound to Tbx21-CNS-3. By contrast, signal transducer and activator of transcription (STAT)-binding motifs within Tbx21-CNS-12 were critical for IL-12-induced T-bet expression during Th1 cell differentiation both in vitro and in vivo. Thus, type 1 innate and adaptive lymphocytes utilize distinct enhancer elements for their development and differentiation.

Differential Expression of the Transcription Factor GATA3 Specifies Lineage and Functions of Innate Lymphoid Cells.

Lymphoid tissue inducer (LTi) cells are regarded as a subset of innate lymphoid cells (ILCs). However, these cells are not derived from the ILC common progenitor, which generates other ILC subsets and is defined by the expression of the transcription factor PLZF. Here, we examined transcription factor(s) determining the fate of LTi progenitors versus non-LTi ILC progenitors. Conditional deletion of Gata3 resulted in the loss of PLZF+ non-LTi progenitors but not the LTi progenitors that expressed the transcription factor RORγt. Consistently, PLZF+ non-LTi progenitors expressed high amounts of GATA3, whereas GATA3 expression was low in RORγt+ LTi progenitors. The generation of both progenitors required the transcriptional regulator Id2, which defines the common helper-like innate lymphoid progenitor (ChILP), but not cytokine signaling. Nevertheless, low GATA3 expression was necessary for the generation of functionally mature LTi cells. Thus, differential expression of GATA3 determines the fates and functions of distinct ILC progenitors.

Group 3 innate lymphoid cells continuously require the transcription factor GATA-3 after commitment.

The transcription factor GATA-3 is indispensable for the development of all innate lymphoid cells (ILCs) that express the interleukin 7 receptor α-chain (IL-7Rα). However, the function of low GATA-3 expression in committed group 3 ILCs (ILC3 cells) has not been identified. We found that GATA-3 regulated the homeostasis of ILC3 cells by controlling IL-7Rα expression. In addition, GATA-3 served a critical function in the development of the NKp46(+) ILC3 subset by regulating the balance between the transcription factors T-bet and RORγt. Among NKp46(+) ILC3 cells, although GATA-3 positively regulated genes specific to the NKp46(+) ILC3 subset, it negatively regulated genes specific to lymphoid tissue-inducer (LTi) or LTi-like ILC3 cells. Furthermore, GATA-3 was required for IL-22 production in both ILC3 subsets. Thus, despite its low expression, GATA-3 was critical for the homeostasis, development and function of ILC3 subsets.

Accelerating the design of pili-enabled living materials using an integrative technological workflow.

Bacteria can be programmed to create engineered living materials (ELMs) with self-healing and evolvable functionalities. However, further development of ELMs is greatly hampered by the lack of engineerable nonpathogenic chassis and corresponding programmable endogenous biopolymers. Here, we describe a technological workflow for facilitating ELMs design by rationally integrating bioinformatics, structural biology and synthetic biology technologies. We first develop bioinformatics software, termed Bacteria Biopolymer Sniffer (BBSniffer), that allows fast mining of biopolymers and biopolymer-producing bacteria of interest. As a proof-of-principle study, using existing pathogenic pilus as input, we identify the covalently linked pili (CLP) biosynthetic gene cluster in the industrial workhorse Corynebacterium glutamicum. Genetic manipulation and structural characterization reveal the molecular mechanism of the CLP assembly, ultimately enabling a type of programmable pili for ELM design. Finally, engineering of the CLP-enabled living materials transforms cellulosic biomass into lycopene by coupling the extracellular and intracellular bioconversion ability.

Revisiting Solar Energy Flow in Nanomaterial-Microorganism Hybrid Systems.

Nanomaterial-microorganism hybrid systems (NMHSs), integrating semiconductor nanomaterials with microorganisms, present a promising platform for broadband solar energy harvesting, high-efficiency carbon reduction, and sustainable chemical production. While studies underscore its potential in diverse solar-to-chemical energy conversions, prevailing NMHSs grapple with suboptimal energy conversion efficiency. Such limitations stem predominantly from an insufficient systematic exploration of the mechanisms dictating solar energy flow. This review provides a systematic overview of the notable advancements in this nascent field, with a particular focus on the discussion of three pivotal steps of energy flow: solar energy capture, cross-membrane energy transport, and energy conversion into chemicals. While key challenges faced in each stage are independently identified and discussed, viable solutions are correspondingly postulated. In view of the interplay of the three steps in affecting the overall efficiency of solar-to-chemical energy conversion, subsequent discussions thus take an integrative and systematic viewpoint to comprehend, analyze and improve the solar energy flow in the current NMHSs of different configurations, and highlighting the contemporary techniques that can be employed to investigate various aspects of energy flow within NMHSs. Finally, a concluding section summarizes opportunities for future research, providing a roadmap for the continued development and optimization of NMHSs.

Engineered Living Materials For Sustainability.

Recent advances in synthetic biology and materials science have given rise to a new form of materials, namely engineered living materials (ELMs), which are composed of living matter or cell communities embedded in self-regenerating matrices of their own or artificial scaffolds. Like natural materials such as bone, wood, and skin, ELMs, which possess the functional capabilities of living organisms, can grow, self-organize, and self-repair when needed. They also spontaneously perform programmed biological functions upon sensing external cues. Currently, ELMs show promise for green energy production, bioremediation, disease treatment, and fabricating advanced smart materials. This review first introduces the dynamic features of natural living systems and their potential for developing novel materials. We then summarize the recent research progress on living materials and emerging design strategies from both synthetic biology and materials science perspectives. Finally, we discuss the positive impacts of living materials on promoting sustainability and key future research directions.

Identification of candidate genes associated with peanut pod length by combined analysis of QTL-seq and RNA-seq.

Pod length (PL) is one of the major traits determining pod size and yield of peanut. Discovering the quantitative trait loci (QTL) and identifying candidate genes associated with PL are essential for breeding high-yield peanut. In this study, quantitative trait loci sequencing (QTL-seq) was performed using the F2 population constructed by a short-pod variety Tifrunner (Tif) and a long-pod line Lps, and a 0.77 Mb genomic region on chromosome 07 was identified as the candidate region for PL. Then, the candidate region was narrowed to a 265.93 kb region by traditional QTL approach. RNA-seq analysis showed that there were four differentially expressed genes (DEGs) in the candidate region, among which Arahy.PF2L6F (AhCDC48) and Arahy.P4LK2T (AhTAA1) were speculated to be PL-related candidate genes. These results were informative for the elucidation of the underlying regulatory mechanism in peanut pod length and would facilitate further identification of valuable target genes.

Ligand-Nondestructive Direct Photolithography Assisted by Semiconductor Polymer Cross-Linking for High-Resolution Quantum Dot Light-Emitting Diodes.

The photolithographic patterning of fine quantum dot (QD) films is of great significance for the construction of QD optoelectronic device arrays. However, the photolithography methods reported so far either introduce insulating photoresist or manipulate the surface ligands of QDs, each of which has negative effects on device performance. Here, we report a direct photolithography strategy without photoresist and without engineering the QD surface ligands. Through cross-linking of the surrounding semiconductor polymer, QDs are spatially confined to the network frame of the polymer to form high-quality patterns. More importantly, the wrapped polymer incidentally regulates the energy levels of the emitting layer, which is conducive to improving the hole injection capacity while weakening the electron injection level, to achieve balanced injection of carriers. The patterned QD light-emitting diodes (with a pixel size of 1.5 µm) achieve a high external quantum efficiency of 16.25% and a brightness of >1.4 × 105 cd/m2. This work paves the way for efficient high-resolution QD light-emitting devices.

Fabrication of lidocaine-loaded polymer dissolving microneedles for rapid and prolonged local anesthesia.

There is an urgent need for research into effective interventions for pain management to improve patients' life quality. Traditional needle and syringe injection were used to administer the local anesthesia. However, it causes various discomforts, ranging from brief stings to trypanophobia and denial of medical operations. In this study, a dissolving microneedles (MNs) system made of composite matrix materials of polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA), and sodium hyaluronate (HA) was successfully developed for the loading of lidocaine hydrochloride (LidH). The morphology, size and mechanical properties of the MNs were also investigated. After the insertion of MNs into the skin, the matrix at the tip of the MNs was swelled and dissolved by absorption of interstitial fluid, leading to a rapid release of loaded LidH from MNs' tips. And the LidH in the back patching was diffused into deeper skin tissue through microchannels created by MNs insertion, forming a prolonged anesthesia effect. In addition, the back patching of MNs could be acted as a drug reservoir to form a prolonged local anesthesia effect. The results showed that LidH MNs provided a superior analgesia up to 8 h, exhibiting a rapid and long-lasting analgesic effects. Additionally, tissue sectioning and in vitro cytotoxicity tests indicated that the MNs patch we developed had a favorable biosafety profile.

Tet2: breaking down barriers to T cell cytokine expression.

It has been unclear whether alteration in DNA methylation at cytokine genes during T helper (Th) cell differentiation is a cause or consequence of gene expression. In this issue of Immunity, Ichiyama et al. (2015) show that oxidation of 5-methylcytosine by the methylcytosine dioxygenase Tet2 regulates cytokine production in Th cells.

Rational design of functional amyloid fibrillar assemblies.

Amyloid fibrillar assemblies, originally identified as pathological entities in neurodegenerative diseases, have been widely adopted by various proteins to fulfill diverse biological functions in living organisms. Due to their unique features, such as hierarchical assembly, exceptional mechanical properties, environmental stability, and self-healing properties, amyloid fibrillar assemblies have been employed as functional materials in numerous applications. Recently, with the rapid advancement in synthetic biology and structural biology tools, new trends in the functional design of amyloid fibrillar assemblies have begun to emerge. In this review, we provide a comprehensive overview of the design principles for functional amyloid fibrillar assemblies from an engineering perspective, as well as through the lens of structural insights. Initially, we introduce the fundamental structural configurations of amyloid assemblies and highlight the functions of representative examples. We then focus on the underlying design principles of two prevalent strategies for the design of functional amyloid fibrillar assemblies: (1) introducing new functions via protein modular design and/or hybridization, with typical applications encompassing catalysis, virus disinfection, biomimetic mineralization, bio-imaging, and biotherapy; and (2) dynamically regulating living amyloid fibrillar assemblies using synthetic gene circuits, with typical applications in pattern formation, leakage repair, and pressure sensing. Next, we summarize how breakthroughs in characterization techniques have contributed to unveiling the structural polymorphism of amyloid fibrils at the atomic level, and further clarifying the highly diverse regulation mechanisms of amyloid fibrillar assembly and disassembly fine-tuned by various factors. The structural knowledge may significantly aid in the structure-guided design of amyloid fibrillar assemblies with diverse bio-activities and adjustable regulatory properties. Finally, we envision that a new trend in functional amyloid design may emerge by integrating structural tunability, synthetic biology and artificial intelligence.

A High-Performance Flexible Hydroacoustic Transducer Based on 1-3 PZT-5A/Silicone Rubber Composite.

In recent years, hydroacoustic transducers made of PZT/epoxy composites have been extensively employed in underwater detection, communication, and recognition for their high energy conversion efficiency. Despite the ease with which these transducers can be formed into complex shapes, their lack of mechanical flexibility limits their versatility across various sizes of underwater vehicles. This study introduces a novel flexible piezoelectric composite hydroacoustic transducer (FPCHT) based on a 1-3 PZT-5A/silicone rubber composite and an island-bridge flexible electrode, which can break the limitations of existing hydroacoustic transducers that do not have flexibility. The finite element method is used to optimize the structural parameters of high-performance 1-3 FPC. A large-sized (187 mm × 47 mm × 5.12 mm) FPC is fabricated using an improved cutting-filling method and packaged into the FPCHT. Compared with the planar rigid PZT/epoxy composite hydroacoustic transducer (RPCHT) of the same size, the TVR (186.5 db) of the FPCHT has increased by about 7 dB, indicating that it has better acoustic radiation performance and electroacoustic conversion efficiency. Furthermore, its electroacoustic performance exhibits excellent stability under different bending states. Therefore, the FPCHT with high electroacoustic performance is an ideal substitute for the existing RPCHT and promotes the development of hydroacoustic transducers towards flexibility and portability.

Thin-Film Buckling Theory and Clinical Application of the Mechanism of Double Eyelid Formation.

BACKGROUND: The mechanism underlying the formation of upper eyelid creases has been the subject of extensive study and ongoing debate. This research aims to elucidate the principles of upper eyelid creases formation, leveraging the membrane bending theory from engineering mechanics. METHODS: We developed an anatomical model of the eyelid and implemented the finite element analysis. Preprocessing and mesh division were conducted using HyperMesh, followed by computational analysis with Abaqus. This approach enabled the observation of dynamic changes in the upper eyelid during eye opening and closing. RESULTS: The study reveals that natural upper eyelid crease formation is influenced by multiple factors. These include the softer texture of the upper eyelid skin and the suborbicularis oculi fat, reduced rigidity at the eyelid crease, optimal contraction force of the upper eyelid, and the strategic placement of the pre-tarsal fat pad just above the eyelid crease. CONCLUSIONS: Ultimately, our findings demonstrate the effectiveness of finite element analysis, grounded in membrane bending theory, in elucidating the dynamics of upper eyelid crease formation. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors   www.springer.com/00266 .

How the digital economy is empowering green strategies for breaking carbon lock-in.

In the era of climate change and carbon neutrality, China is actively coping with its carbon lock-in dilemma. In this context, the development of the digital economy is considered a possible path to carbon unlocking. This study contributes to the literature by providing a comprehensive analysis of how the digital economy can be leveraged to address carbon lock-in, highlighting the importance of formal environmental regulation and informal environmental regulation in enhancing this effect. Accordingly, following findings are highlighted. (1) Our primary findings provide strong evidence on the negative effect of the digital economy on carbon lock-in; by implication, improving the digital economy is an efficient measure for eradicating carbon lock-in. (2) The digital economy shows the greatest marginal impact on industrial lock-in, while its inhibiting effect on behavior lock-in is the least pronounced. Moreover, the digital economy plays a prominent role in curbing carbon lock-in in provinces with a higher level of physical, human, and social capital. And the asymmetric impacts of the digital economy on carbon lock-in are significant at most quantiles. (3) Environmental regulation is a significant moderator. Put differently, the synergy of formal environmental regulation and the digital economy, as well as informal environmental regulation and the digital economy, are important means to break carbon lock-in. (4) The carbon lock-in mitigation effect of the digital economy is caused mainly by increasing technical market turnover and the efficiency of energy consumption.

Saponins from Allium macrostemon Bulbs Attenuate Endothelial Inflammation and Acute Lung Injury via the NF-κB/VCAM-1 Pathway.

Endothelial inflammation is a multifaceted physiological process that plays a pivotal role in the pathogenesis and progression of diverse diseases, encompassing but not limited to acute lung infections like COVID-19, coronary artery disease, stroke, sepsis, metabolic syndrome, certain malignancies, and even psychiatric disorders such as depression. This inflammatory response is characterized by augmented expression of adhesion molecules and secretion of pro-inflammatory cytokines. In this study, we discovered that saponins from Allium macrostemon bulbs (SAMB) effectively inhibited inflammation in human umbilical vein endothelial cells induced by the exogenous inflammatory mediator lipopolysaccharide or the endogenous inflammatory mediator tumor necrosis factor-α, as evidenced by a significant reduction in the expression of pro-inflammatory factors and vascular cell adhesion molecule-1 (VCAM-1) with decreased monocyte adhesion. By employing the NF-κB inhibitor BAY-117082, we demonstrated that the inhibitory effect of SAMB on VCAM-1 expression may be attributed to the NF-κB pathway's inactivation, as characterized by the suppressed IκBα degradation and NF-κB p65 phosphorylation. Subsequently, we employed a murine model of lipopolysaccharide-induced septic acute lung injury to substantiate the potential of SAMB in ameliorating endothelial inflammation and acute lung injury in vivo. These findings provide novel insight into potential preventive and therapeutic strategies for the clinical management of diseases associated with endothelial inflammation.

Edgeworthia gardneri (Wall.) Meisn. Ethanolic Extract Attenuates Endothelial Activation and Alleviates Cardiac Ischemia-Reperfusion Injury.

Endothelial pro-inflammatory activation is pivotal in cardiac ischemia-reperfusion (I/R) injury pathophysiology. The dried flower bud of Edgeworthia gardneri (Wall.) Meisn. (EG) is a commonly utilized traditional Tibetan medicine. However, its role in regulating endothelium activation and cardiac I/R injury has not been investigated. Herein, we showed that the administration of EG ethanolic extract exhibited a potent therapeutic efficacy in ameliorating cardiac endothelial inflammation (p < 0.05) and thereby protecting against myocardial I/R injury in rats (p < 0.001). In line with the in vivo findings, the EG extract suppressed endothelial pro-inflammatory activation in vitro by downregulating the expression of pro-inflammatory mediators (p < 0.05) and diminishing monocytes' firm adhesion to endothelial cells (ECs) (p < 0.01). Mechanistically, we showed that EG extract inhibited the nuclear factor kappa-B (NF-κB), c-Jun N-terminal kinase (JNK), extracellular regulated protein kinase (ERK), and p38 mitogen-activated protein kinase (MAPK) signaling pathways to attenuate EC-mediated inflammation (p < 0.05). Collectively, for the first time, this study demonstrated the therapeutic potential of EG ethanolic extract in alleviating I/R-induced inflammation and the resulting cardiac injury through its inhibitory role in regulating endothelium activation.

The determination of peanut (Arachis hypogaea L.) pod-sizes during the rapid-growth stage by phytohormones.

BACKGROUND: Pod size is an important yield target trait for peanut breeding. However, the molecular mechanism underlying the determination of peanut pod size still remains unclear. RESULTS: In this study, two peanut varieties with contrasting pod sizes were used for comparison of differences on the transcriptomic and endogenous hormonal levels. Developing peanut pods were sampled at 10, 15, 20, 25 and 30 days after pegging (DAP). Our results showed that the process of peanut pod-expansion could be divided into three stages: the gradual-growth stage, the rapid-growth stage and the slow-growth stage. Cytological analysis confirmed that the faster increase of cell-number during the rapid-growth stage was the main reason for the formation of larger pod size in Lps. Transcriptomic analyses showed that the expression of key genes related to the auxin, the cytokinin (CK) and the gibberellin (GA) were mostly up-regulated during the rapid-growth stage. Meanwhile, the cell division-related differentially expressed genes (DEGs) were mostly up-regulated at 10DAP which was consistent with the cytological-observation. Additionally, the absolute quantification of phytohormones were carried out by liquid-chromatography coupled with the tandem-mass-spectrometry (LC-MS/MS), and results supported the findings from comparative transcriptomic studies. CONCLUSIONS: It was speculated that the differential expression levels of TAA1 and ARF (auxin-related), IPT and B-ARR (CK-related), KAO, GA20ox and GA3ox (GA-related), and certain cell division-related genes (gene-LOC112747313 and gene-LOC112754661) were important participating factors of the determination-mechanism of peanut pod sizes. These results were informative for the elucidation of the underlying regulatory network in peanut pod-growth and would facilitate further identification of valuable target genes.

Living materials fabricated via gradient mineralization of light-inducible biofilms.

Living organisms have evolved sophisticated cell-mediated biomineralization mechanisms to build structurally ordered, environmentally adaptive composite materials. Despite advances in biomimetic mineralization research, it remains difficult to produce mineralized composites that integrate the structural features and 'living' attributes of their natural counterparts. Here, inspired by natural graded materials, we developed living patterned and gradient composites by coupling light-inducible bacterial biofilm formation with biomimetic hydroxyapatite (HA) mineralization. We showed that both the location and the degree of mineralization could be regulated by tailoring functional biofilm growth with spatial and biomass density control. The cells in the composites remained viable and could sense and respond to environmental signals. Additionally, the composites exhibited a maximum 15-fold increase in Young's modulus after mineralization and could be applied to repair damage in a spatially controlled manner. Beyond insights into the mechanism of formation of natural graded composites, our study provides a viable means of fabricating living composites with dynamic responsiveness and environmental adaptability.