RESUMEN
Two-dimensional (2D) transition metal dichalcogenides (TMDs), a rising star in the post-graphene era, are fundamentally and technologically intriguing for photocatalysis. Their extraordinary electronic, optical, and chemical properties endow them as promising materials for effectively harvesting light and catalyzing the redox reaction in photocatalysis. Here, we present a tutorial-style review of the field of 2D TMDs for photocatalysis to educate researchers (especially the new-comers), which begins with a brief introduction of the fundamentals of 2D TMDs and photocatalysis along with the synthesis of this type of material, then look deeply into the merits of 2D TMDs as co-catalysts and active photocatalysts, followed by an overview of the challenges and corresponding strategies of 2D TMDs for photocatalysis, and finally look ahead this topic.
RESUMEN
Research on 2D nanomaterials is still in its early stages. Most studies have focused on elucidating the unique properties of the materials, whereas only few reports have described the biomedical applications of 2D nanomaterials. Recently, important questions about the interaction of 2D MXene nanomaterials with biological components have been raised. 2D MXenes are monolayer atomic nanosheets derived from MAX phase ceramics. As a new type of inorganic nanosystems, they are being widely used in biology and biomedicine. This review introduces the latest developments in 2D MXenes for the most advanced biomedical applications, including preparation and surface modification strategies, treatment modes, drug delivery, antibacterial activity, bioimaging, sensing, and biocompatibility. Besides, this review also discusses the current development trends and prospects of 2D inorganic nanosheets for further clinical applications. These emerging 2D inorganic MXenes will play an important role in next-generation cancer treatments.
Asunto(s)
Nanoestructuras , Antibacterianos/farmacología , Sistemas de Liberación de MedicamentosRESUMEN
Manganese dioxide (MnO2 ), with naturally abundant crystal phases, is one of the most active candidates for toluene degradation. However, it remains ambiguous and controversial of the phase-activity relationship and the origin of the catalytic activity of these multiphase MnO2 . In this study, six types of MnO2 with crystal phases corresponding to α-, ß-, γ-, ε-, λ-, and δ-MnO2 are prepared, and their catalytic activity toward ozone-assisted catalytic oxidation of toluene at room temperature are studied, which follow the order of δ-MnO2 > α-MnO2 > ε-MnO2 > γ-MnO2 > λ-MnO2 > ß-MnO2 . Further investigation of the specific oxygen species with the toluene oxidation activity indicates that high catalytic activity of MnO2 is originated from the rich oxygen vacancy and the strong mobility of oxygen species. This work illustrates the important role of crystal phase in determining the oxygen vacancies' density and the mobility of oxygen species, thus influencing the catalytic activity of MnO2 catalysts, which sheds light on strategies of rational design and synthesis of multiphase MnO2 catalysts for volatile organic pollutants' (VOCs) degradation.
Asunto(s)
Nanoestructuras , Ozono , Catálisis , Compuestos de Manganeso , Óxidos , ToluenoRESUMEN
Cr(VI) is a toxic metal pollutant existing in industrial effluents. In this study, Fe3O4 and layered double hydroxide (LDH) were inserted into the litchi shell (LS) successively by the co-precipitation method to synthesize the modified magnetic litchi shell adsorbent (MMLS) for removing Cr(VI). The advantageous structure characteristics of MMLS were confirmed by XRD, FT-IR, SEM and the hysteresis loop characterization. The batch experiments of optimizing the conditions (pH, adsorbent dosage, initial concentration, coexisting ions) for removing Cr(VI) were accomplished to in simulated wastewater at room temperature. And the optimal pH of 3 and initial concentration of 100 mg/L in simulated wastewater were similar to that in the actual chrome-plated rinse water with the stable MMLS. The effect of coexisting ions indicated anions and Cr(VI) competed with each other for the adsorption site, but the interactions were negligible in actual chrome-plated rinse water. Chemisorption as a rate-limiting step was confirmed with a good fit of pseudo-second-order kinetics. And the adsorption behavior of MMLS can not be explained by a single theory according to Sips model. The desorption and recycle experiments demonstrated MMLS was reusable in actual chrome-plated rinse water.
Asunto(s)
Litchi , Contaminantes Químicos del Agua , Adsorción , Cromo/análisis , Concentración de Iones de Hidrógeno , Cinética , Espectroscopía Infrarroja por Transformada de Fourier , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
Understanding the formation and transformation of radicals generated by a low pressure mercury lamp emitting both 254 nm ultraviolet (UV254) and 185 nm vacuum UV (VUV185) is currently challenging due to the complexity of concurrent redox reactions occurring in this complex system. Because hydrogen peroxide (H2O2) is a common product of both oxidizing and reducing radicals generated during the VUV irradiation process, monitoring the variations in H2O2 levels can help us better understand the presence and relative dominance of different radicals. In this study, we systematically evaluated the effects of several selected anions on the formation of H2O2 under a variety of pH and dissolved oxygen (DO) conditions. Results show that although addition of these anions inhibited the formation of H2O2, their H2O2-inhibition mechanisms are markedly different. At low concentrations (≤1.0 mg/L), chloride reduced the generation of H2O2 primarily by consuming hydroxyl radicals (â¢OH); however, in high concentrations (11.0 mg/L), its light-screening effect was dominant. In comparison, the presence of bromide (≤1.0 mg/L) inhibited H2O2 formation mainly by reacting rapidly with both â¢OH and H2O2. Carbonate and phosphorous species exerted influence mainly by consuming â¢OH. Along with irradiation, increasing pH significantly decreased H2O2 levels, confirming that H2O2 was formed mainly by â¢OH. In contrast, raising DO did not raise H2O2 maximum yields, confirming that reducing radicals like aqueous electrons (e-aq) and hydrogen atoms (â¢H) are not the key precursors of H2O2 in this process. Mathematically, the evolutions of H2O2 can be reliably modeled (R2 ≥ 0.80) using a kinetics model incorporating H2O2 formation and decomposition kinetics. The results of this study may contribute to better understanding the use of VUV technology in water/wastewater treatment.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Peróxido de Hidrógeno , Radical Hidroxilo , Oxidación-Reducción , Rayos Ultravioleta , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
The solid acid catalyst, N-F codoped TiO2/SiO2 composite oxide was prepared by a sol-gel method using NH4F as nitrogen and fluorine source. The prepared materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV-Visible diffuse reflectance spectroscopy (UV-Vis), ammonia adsorption and temperature-programmed desorption (NH3-TPD), in situ Fourier transform infrared spectroscopy (FT-IR) and N2 physical adsorption isotherm. The photocatalytic activity of the catalyst for acrylonitrile degradation was investigated under simulant solar irradiation. The results showed that strong Lewis and Brønsted acid sites appear on the surface of the sample after N-F doping. Systematic investigation showed that the highest photocatalytic activity for acrylonitrile degradation was obtained for samples calcined at 450°C with molar ratio (NH4F to Ti) of 0.8. The degradation ratio of 71.5% was achieved with the prepared catalyst after 6-min irradiation, demonstrating the effectiveness of photocatalytic degradation of acrylonitrile with N-F codoped TiO2/SiO2 composite oxide. The photocatalyst is promising for application under solar light irradiation. Moreover, the intermediates generated after irradiation were verified by gas chromatography-mass spectrometry (GC-MS) analysis and UV-Vis spectroscopy to be simple organic acids with lower toxicity, and the degradation pathway was also proposed for acrylonitrile degradation with the prepared catalyst.
Asunto(s)
Acrilonitrilo/química , Fluoruros/química , Fotólisis , Compuestos de Amonio Cuaternario/química , Dióxido de Silicio/química , Titanio/química , Adsorción , Compuestos de Amonio , Animales , Catálisis , Contaminantes Ambientales/química , Microscopía Electrónica de Rastreo , Espectroscopía de Fotoelectrones , TemperaturaRESUMEN
Using velocity map ion imaging, the photodissociation of chlorobromomethane (CH2BrCl) at 233-234 nm has been studied. The total translational energy distributions and the anisotropy parameters have been determined from the ion images of the photofragments Br ((2)P1/2) (denoted as Br(*)) and Br ((2)P3/2) (denoted as Br) for the dominant CH2BrCl + hv â CH2Cl + Br(*) and CH2BrCl + hv â CH2Cl + Br channels. Using an impulsive model invoking angular momentum conservation, the vibrational energy distributions of the chloromethyl radicals have been derived from the total translational energy distributions for the two channels. The study suggests that there are a number of vibrational modes of the chloromethyl radical to be excited in both of the two photodissociation channels. In the Br* channel, the CH2 s-stretch mode v1 has the most probability of excitation. While in the Br channel, the CH2 scissors mode ν2 is attributed to the highest peak of the vibrational energy curve of the chloromethyl radical. The results further imply that, following absorption of one UV photon of 234 nm, other vibrational modes besides v5 (C-Br stretch mode) are also excited in the parent molecule.
RESUMEN
The construction of hybrid heterojunction photocatalysts is an effective strategy to improve the utilization of photogenerated carriers and photocatalytic activity. To enhance the separation distance of photogenerated carriers and accelerate the effective separation at the heterojunction of the interface, a unique 0D-2D hierarchical nanostructured p-n heterojunction was successfully fabricated in this work. BiOCl (BOC) nanosheets (p-type) were in situ grown on BiVO4 (BVO) nanoparticles (n-type) using the microemulsion-calcination method for highly efficient visible-light-driven organic dye degradation. Compared with pure BVO (the degradation rate of rhodamine B (RhB): about 32.0% in 55 min, the mineralization rate: 24.9% in 120 min), the RhB degradation rate can reach about 99.5% in 55 min and the mineralization rate of 62.1% in 120 min by utilizing BVO/25%BOC heterojunction photocatalyst under visible light irradiation. Various characterizations demonstrate that the formation of BVO/BOC p-n heterojunction greatly facilitates photogenerated carriers separation efficiency. Meanwhile, the results of the scavenging experiments and electron spin resonance tests indicate that ·O2- and h+ are the prominent active species for Rh B degradation. In addition, possible degradation pathways for Rh B were proposed using LC-MS tests. This work proves that building low dimensional p-n heterojunction photocatalysts is a promising strategy for developing photocatalysts with high efficiency.
Asunto(s)
Nanopartículas , Nanoestructuras , Colorantes , Espectroscopía de Resonancia por Spin del Electrón , LuzRESUMEN
Transition metal oxides are promising catalysts for catalytic oxidation reactions but are hampered by low room-temperature activities. Such low activities are normally caused by sparse reactive sites and insufficient capacity for molecular oxygen (O2) activation. Here, we present a dual-stimulation strategy to tackle these two issues. Specifically, we import highly dispersed nickel (Ni) atoms onto MnO2 to enrich its oxygen vacancies (reactive sites). Then, we use molecular ozone (O3) with a lower activation energy as an oxidant instead of molecular O2. With such dual stimulations, the constructed O3-Ni/MnO2 catalytic system shows boosted room-temperature activity for toluene oxidation with a toluene conversion of up to 98%, compared with the O3-MnO2 (Ni-free) system with only 50% conversion and the inactive O2-Ni/MnO2 (O3-free) system. This leap realizes efficient room-temperature catalytic oxidation of transition metal oxides, which is constantly pursued but has always been difficult to truly achieve.
RESUMEN
A series of precious metals catalysts (M/TiO2, M = Ru, Rh, Pd, Ag, Ir, Pt or Au) were prepared by a light deposition method and the synergistic photocatalytic degradations of pyridine (20 mg/L) under UV irradiation (365 nm) using M/TiO2 with electron capture agent KBrO3 have been investigated. The results show that KBrO3 has a greatly synergistic role on M/TiO2 and the photocatalytic activity of M/TiO2 is closely related to its work function. Ag could greatly enhance the activity of TiO2 due to the binding characteristics of pyridine on Ag. Under the conditions of 0.5 wt.% Ag loading, Ag/TiO2 concentration of 0.1 g/L, KBrO3 concentration of 10 mmol/L and reaction liquid pH value at 9, the pyridine can be degraded by 64% within 3 hr, doubled than TiO2 photocatalytic system. The degradation kinetics of pyridine follows first-order kinetics and k = 5.53 x 10(-3) min-1.
Asunto(s)
Bromatos/química , Luz , Piridinas/química , Titanio/química , Catálisis , Cinética , Microscopía Electrónica de RastreoRESUMEN
Methane (CH4 ) is an attractive energy source and important greenhouse gas. Therefore, from the economic and environmental point of view, scientists are working hard to activate and convert CH4 into various products or less harmful gas at low-temperature. Although the inert nature of CH bonds requires high dissociation energy at high temperatures, the efforts of researchers have demonstrated the feasibility of catalysts to activate CH4 at low temperatures. In this review, the efficient catalysts designed to reduce the CH4 oxidation temperature and improve conversion efficiencies are described. First, noble metals and transition metal-based catalysts are summarized for activating CH4 in temperatures ranging from 50 to 500 °C. After that, the partial oxidation of CH4 at relatively low temperatures, including thermocatalysis in the liquid phase, photocatalysis, electrocatalysis, and nonthermal plasma technologies, is briefly discussed. Finally, the challenges and perspectives are presented to provide a systematic guideline for designing and synthesizing the highly efficient catalysts in the complete/partial oxidation of CH4 at low temperatures.
RESUMEN
Human exposure to pesticides is a topic of public health concern for decades. Pesticide exposures have been assessed through the analysis of urine or blood matrices, but little is known on the accumulation of these chemicals in cerebrospinal fluid (CSF). CSF plays an important role in maintaining physical and chemical balance of the brain and central nervous system and any perturbation can have adverse effects on health. In this study, we investigated the occurrence of 222 pesticides in CSF from 91 individuals using gas chromatography-tandem mass spectrometry (GC-MS/MS). Measured pesticide concentrations in CSF were compared with those in 100 serum and urine specimens from individuals living in the same urban location. Twenty pesticides were found in CSF, serum and urine, at levels above the limit of detection. Three most frequently detected pesticides in CSF were biphenyl (100%), diphenylamine (75%), and hexachlorobenzene (63%). Median concentrations of biphenyl in CSF, serum and urine were 1.11, 10.6, and 1.10 ng/mL, respectively. Six triazole fungicides were found only in CSF, but not in other matrices. To our knowledge, this is the first study to report pesticide concentrations in CSF in a general urban population.
Asunto(s)
Plaguicidas , Humanos , Plaguicidas/análisis , Espectrometría de Masas en Tándem , Población Urbana , Cromatografía de Gases y Espectrometría de Masas/métodosRESUMEN
Sterilization and disinfection of pollutants and microorganisms have been extensively studied in order to address the problem of environmental contamination, which is a crucial issue for public health and economics. Various form of hazardous materials/pollutants including microorganisms and harmful gases are released into the environment that enter into the human body either through inhalation, adsorption or ingestion. The human death rate rises due to various respiratory ailments, strokes, lung cancer, and heart disorders related with these pollutants. Hence, it is essential to control the environmental pollution by applying economical and effective sterilization and disinfections techniques to save life. In general, numerous forms of traditional physical and chemical sterilization and disinfection treatments, such as dry and moist heat, radiation, filtration, ethylene oxide, ozone, hydrogen peroxide, etc. are known along with advanced techniques. In this review we summarized both advanced and conventional techniques of sterilization and disinfection along with their uses and mode of action. This review gives the knowledge about the advantages, disadvantages of both the methods comparatively. Despite, the effective solution given by the advanced sterilization and disinfection technology, joint technologies of sterilization and disinfection has proven to be more effective innovation to protect the indoor and outdoor environments.
Asunto(s)
Contaminantes Ambientales , Ozono , Desinfección/métodos , Óxido de Etileno , Sustancias Peligrosas , Humanos , Peróxido de Hidrógeno , Esterilización/métodosRESUMEN
Selective catalytic reduction of NO with CH4 (CH4-SCR) has been studied over a series of amino-acid mediated hierarchical beta zeolites with indium exchange. Amino acid mesoporogens greatly affect the NO reduction (DeNOx) efficiency of In/H-Beta catalysts. Mesoporous In/H-Beta-P synthesized using proline exhibits the highest NOx removal efficiency of 40% in excess oxygen and poisonous SO2 and H2O, 10% higher than our previously optimized In/H-Beta catalyst using commercial beta zeolites with a similar Si/Al ratio. Analyses using XRD, N2 adsorption-desorption, EPR, SEM, TEM, EDX, ICP, 27Al and 29Si MAS NMR, XPS, H2-TPR, NH3-TPD, and Py-IR reveal that amino acids promote beta crystallization, modulate zeolite acid sites and surface oxygen species, and generate hierarchical pore architectures without affecting the Si/Al ratio, indium content, and percentage of the active InO+ species. The mosaic-structured In/H-Beta-P exhibits the strongest Brønsted acidity and surface labile oxygen which enhance the oxyindium interaction with the zeolite framework, promoting CH4-SCR activity. The strong acidity, surface active oxygen species, and mesopores lead to excellent stability of the In/H-Beta-P catalyst in the presence of SO2 and H2O, withstanding several catalytic DeNOx cycles under harsh reaction conditions.
RESUMEN
Rational design of all-solid-state Z-scheme heterojunction with advanced structure is essential for boosting photocatalytic efficiency. Herein, we design and fabricate a novel Z-scheme photocatalyst with leaf architecture (named artificial leaf) via a simple dipping-calcination (DC) process followed by a successive ionic layer adsorption and reaction (SILAR) strategy. The prepared artificial leaf, composing of CdS, InVO4, and BiVO4, holds advanced leaf-like structure and Z-scheme electron transfer pathway. As a result, this novel artificial leaf exhibits outstanding capability for the harvesting of visible light and superior efficiency for the separation of photogenerated electron-hole pairs, as well as remarkably enhanced photocatalytic performance and stability for H2 evolution (with the rate of 5033 µm g-1âh-1) and pollution degradation (46% pollution can be degraded within 3 h).
Asunto(s)
Hidrógeno , Aguas Residuales , Catálisis , LuzRESUMEN
Haloacetaldehydes (HALs) are the third largest disinfection by-product (DBP) ubiquitously detected in finished drinking water and have relatively higher toxicity than currently regulated DBPs. To efficiently alleviate them, this study investigated a green, chemical-free technology by using ultraviolet/vacuum ultraviolet (UV/VUV) on degrading three refractory chlorinated HALs (Cl-HALs). The results indicate that the rates of Cl-HALs decomposition in tap water irradiated by UV/VUV were 23-70 times higher than those irradiated by UV, proving that VUV instead of UV played the key role in degrading Cl-HALs. Increasing Cl-HALs dosage, pH, and dissolved oxygen (DO) all decreased the Cl-HALs degradations significantly, and the rates in tap water were apparently lower than those in ultrapure water. Unlike previous studies, this study proved that both oxidation and reduction were present during the VUV process. Photooxidation via oxidative radicals like â¢OH mineralized Cl-HALs, leading to substantial drops of total organic carbon; photoreduction via reductive radicals like â¢H dehalogenated Cl-HALs, resulting in formation of considerable intermediate organics (e.g., formic acid and acetic acid). No matter what pathway, the mass balances of chlorine were always maintained, meaning that dehalogenation occurred instantaneously rather than sequentially. Although the overall photodegradation rates dropped with rising pH and DO, photoreduction was increased with rising pH while photooxidation was elevated with rising DO. The results hence provide insights to better understand the VUV technology in controlling micropollutants in water.
RESUMEN
The existence of sulfur dioxide and water vapor in the flue gas generated from waste-to-energy stations could lead to catalyst deactivation, which has adverse effects on NOx removal. It is thus particularly important to study the reaction mechanism of catalyst resistance to poisoning. Herein, we report the mechanism of In-Co3O4-Ga2O3/H-Beta catalyst to SO2 and H2O resistance in the selective catalytic reduction (SCR) of NOx by CH4. The catalyst could achieve 74.6% NOx removal efficiency in the presence of 100 ppm SO2 and 5% H2O. In this catalyst, Co3O4 is attributed to enhancing the reversible poisoning of SO2 and CH4 activation and increasing the number of Brønsted acid sites by decomposing H2O. However, the InO+ active center was still eroded by a small amount of water vapor, leading to a reduction in NOx removal efficiency. The addition of Ga2O3 primarily provided an important intermediate NO2 for CH4-SCR reaction and reduced the aggregates of Co3O4 to increase the exposure of indium sites, and could reduce a part of SO2 to S2-. This study provides a good candidate for preparing catalysts with superior resistance towards SO2 and H2O for CH4-SCR.
Asunto(s)
Amoníaco , Vapor , Catálisis , Cobalto , Oxidación-Reducción , ÓxidosRESUMEN
The dynamics of electronically excited states in 2-picoline is studied using femtosecond time-resolved photoelectron imaging spectroscopy. The internal conversion from the S(2) state to the vibrationally excited S(1) state is observed in real time. The secondarily populated high vibronic S(1) state deactivates further to the S(0) state. Photoelectron energy and angular distributions reveal the feature of ionization from the singlet 3p Rydberg states. In addition, variation of time-dependent anisotropy parameters indicates the rotational coherence of the molecule.
Asunto(s)
Picolinas/química , Teoría Cuántica , Espectroscopía de Fotoelectrones , Factores de TiempoRESUMEN
As a fascinating visible-light-responsive photocatalyst, zinc indium sulfide (ZnIn2 S4 ) has attracted extensive interdisciplinary interest and is expected to become a new research hotspot in the near future, due to its nontoxicity, suitable band gap, high physicochemical stability and durability, ease of synthesis, and appealing catalytic activity. This review provides an overview on the recent advances in ZnIn2 S4 -based photocatalysts. First, the crystal structures and band structures of ZnIn2 S4 are briefly introduced. Then, various modulation strategies of ZnIn2 S4 are outlined for better photocatalytic performance, which includes morphology and structure engineering, vacancy engineering, doping engineering, hydrogenation engineering, and the construction of ZnIn2 S4 -based composites. Thereafter, the potential applications in the energy and environmental area of ZnIn2 S4 -based photocatalysts are summarized. Finally, some personal perspectives about the promises and prospects of this emerging material are provided.
RESUMEN
Photodissociation dynamics of 2-bromopropane in the A band was investigated at several wavelengths between 232 and 267 nm using resonance-enhanced multiphoton ionization technique combined with velocity map ion-imaging detection. The ion images of Br ((2)P(3/2)) and Br* ((2)P(1/2)) were analyzed to yield corresponding total translational energy and angular distributions. The total translational energy distributions showed that the channel leading to Br carried more internal energy in the 2-C(3)H(7) moiety than the channel leading to Br*. The anisotropy parameters of beta (Br) were obtained to be between 0.68 and 1.49, and beta (Br*) between 0.73 and 1.96, indicating that the Br* product originates from direct excitation of the (3)Q(0) state and the (1)Q(1) --> (3)Q(0) nonadiabatic transition, and the Br product from direct excitation of the (1)Q(1) or (3)Q(1) state and the (3)Q(0) --> (1)Q(1) nonadiabatic transition. The curve crossing probabilities were determined to be increase with the wavelength. As compared with the case of CH(3)Br, the two heavier branched CH(3) groups significantly enhance the Br ((2)P(3/2)) production from nonadiabatic contribution. The curve crossing from the (3)Q(0) to the (1)Q(1) surface is much higher than that of the reverse from the (1)Q(1) to the (3)Q(0) surface, which may have resulted from the difference in shape between the potential energy surfaces of the (3)Q(0) and (1)Q(1) states. Finally, based on the experimental data, the partial absorption cross sections of the A band for the (3)Q(0), (3)Q(1), and (1)Q(1) states were extracted.