Ladderphane copolymers for high-temperature capacitive energy storage.

For capacitive energy storage at elevated temperatures1-4, dielectric polymers are required to integrate low electrical conduction with high thermal conductivity. The coexistence of these seemingly contradictory properties remains a persistent challenge for existing polymers. We describe here a class of ladderphane copolymers exhibiting more than one order of magnitude lower electrical conductivity than the existing polymers at high electric fields and elevated temperatures. Consequently, the ladderphane copolymer possesses a discharged energy density of 5.34 J cm-3 with a charge-discharge efficiency of 90% at 200 °C, outperforming the existing dielectric polymers and composites. The ladderphane copolymers self-assemble into highly ordered arrays by π-π stacking interactions5,6, thus giving rise to an intrinsic through-plane thermal conductivity of 1.96 ± 0.06 W m-1 K-1. The high thermal conductivity of the copolymer film permits efficient Joule heat dissipation and, accordingly, excellent cyclic stability at elevated temperatures and high electric fields. The demonstration of the breakdown self-healing ability of the copolymer further suggests the promise of the ladderphane structures for high-energy-density polymer capacitors operating under extreme conditions.

Strong tough hydrogels via the synergy of freeze-casting and salting out.

Natural load-bearing materials such as tendons have a high water content of about 70 per cent but are still strong and tough, even when used for over one million cycles per year, owing to the hierarchical assembly of anisotropic structures across multiple length scales1. Synthetic hydrogels have been created using methods such as electro-spinning2, extrusion3, compositing4,5, freeze-casting6,7, self-assembly8 and mechanical stretching9,10 for improved mechanical performance. However, in contrast to tendons, many hydrogels with the same high water content do not show high strength, toughness or fatigue resistance. Here we present a strategy to produce a multi-length-scale hierarchical hydrogel architecture using a freezing-assisted salting-out treatment. The produced poly(vinyl alcohol) hydrogels are highly anisotropic, comprising micrometre-scale honeycomb-like pore walls, which in turn comprise interconnected nanofibril meshes. These hydrogels have a water content of 70-95 per cent and properties that compare favourably to those of other tough hydrogels and even natural tendons; for example, an ultimate stress of 23.5 ± 2.7 megapascals, strain levels of 2,900 ± 450 per cent, toughness of 210 ± 13 megajoules per cubic metre, fracture energy of 170 ± 8 kilojoules per square metre and a fatigue threshold of 10.5 ± 1.3 kilojoules per square metre. The presented strategy is generalizable to other polymers, and could expand the applicability of structural hydrogels to conditions involving more demanding mechanical loading.

Digital synthetic polymers for information storage.

Digital synthetic polymers with uniform chain lengths and defined monomer sequences have recently become intriguing alternatives to traditional silicon-based information devices or natural biomacromolecules for data storage. The structural diversity of information-containing macromolecules endows the digital synthetic polymers with higher stability and storage density but less occupied space. Through subtly designing each unit of coded structure, the information can be readily encoded into digital synthetic polymers in a more economical scheme and more decodable, opening up new avenues for molecular digital data storage with high-level security. This tutorial review summarizes recent advances in salient features of digital synthetic polymers for data storage, including encoding, decoding, editing, erasing, encrypting, and repairing. The current challenges and outlook are finally discussed to offer potential solution guidance and new perspectives for the creation of next-generation digital synthetic polymers and broaden the scope of their applicability.

In Situ Vaccination with An Injectable Nucleic Acid Hydrogel for Synergistic Cancer Immunotherapy.

Recently, therapeutic cancer vaccines have emerged as promising candidates for cancer immunotherapy. Nevertheless, their efficacies are frequently impeded by challenges including inadequate antigen encapsulation, insufficient immune activation, and immunosuppressive tumor microenvironment. Herein, we report a three-in-one hydrogel assembled by nucleic acids (NAs) that can serve as a vaccine to in situ trigger strong immune response against cancer. Through site-specifically grafting the chemodrug, 7-ethyl-10-hydroxycamptothecin (also known as SN38), onto three component phosphorothioate (PS) DNA strands, a Y-shaped motif (Y-motif) with sticky ends is self-assembled, at one terminus of which an unmethylated cytosine-phosphate-guanine (CpG) segment is introduced as an immune agonist. Thereafter, programmed cell death ligand-1 (PD-L1) siRNA that performs as immune checkpoint inhibitor is designed as a crosslinker to assemble with the CpG- and SN38-containing Y-motif, resulting in the formation of final NA hydrogel vaccine. With three functional agents inside, the hydrogel can remarkably induce the immunogenic cell death to enhance the antigen presentation, promoting the dendritic cell maturation and effector T lymphocyte infiltration, as well as relieving the immunosuppressive tumor environment. When inoculated twice at tumor sites, the vaccine demonstrates a substantial antitumor effect in melanoma mouse model, proving its potential as a general platform for synergistic cancer immunotherapy.

Asymmetric Synthesis of Chiral 1,2-Bis(Boronic) Esters Featuring Acyclic, Non-Adjacent 1,3-Stereocenters.

The construction of acyclic, non-adjacent 1,3-stereogenic centers, prevalent motifs in drugs and bioactive molecules, has been a long-standing synthetic challenge due to acyclic nucleophiles being distant from the chiral environment. In this study, we successfully synthesized highly valuable 1,2-bis(boronic) esters featuring acyclic and nonadjacent 1,3-stereocenters. Notably, this reaction selectively produces migratory coupling products rather than alternative deborylative allylation or direct allylation byproducts. This approach introduces a new activation mode for selective transformations of gem-diborylmethane in asymmetric catalysis. Additionally, we found that other gem-diborylalkanes, previously challenging due to steric hindrance, also successfully participated in this reaction. The incorporation of 1,2-bis(boryl)alkenes facilitated the diversification of the alkenyl and two boron moieties in our target compounds, thereby enabling access to a broad array of versatile molecules. DFT calculations were performed to elucidate the reaction mechanism and shed light on the factors responsible for the observed excellent enantioselectivity and diastereoselectivity. These were determined to arise from ligand-substrate steric repulsions in the syn-addition transition state.

Antifouling Asymmetric Block Copolymer Nanofilms via Freestanding Interfacial Polymerization for Efficient and Sustainable Water Purification.

Membrane materials that resist nonspecific or specific adsorption are urgently required in widespread applications. In water purification, inevitable membrane fouling not only limits separation performance, but also remarkably increases operation requirements, and augments extra maintenance costs and higher energy consumption. In this work, we report a freestanding interfacial polymerization (IP) fabrication strategy for in-situ creation of asymmetric block copolymer (BCP) nanofilms with antifouling properties, greatly outperforming the conventional surface post-modification approaches. The resultant asymmetric BCP nanofilms with highly-dense, highly-hydrophilic polyethylene glycol (PEG) brushes, can be readily formed via a typical IP process of a double-hydrophilic BCP composed of an antifouling PEG block and a membrane-forming multiamine block. The asymmetric BCP nanofilms have been applied for efficient and sustainable natural water purification, demonstrating extraordinary antifouling capabilities accompanied with superior separation performance far beyond commercial polyamide nanofiltration membranes. The antifouling behaviors of BCP nanofilms derived from the combined effect of the hydration layer, electrostatic repulsion and steric hindrance were further elucidated by water flux and fouling resistance in combination with all-atom molecular dynamics simulation. This work opens up a new avenue for large-scale and low-cost creation of broad-spectrum, asymmetric membrane materials with diverse functional "defect-free" surfaces in real-world applications.

Surface Chain-Transfer Ring-Opening Metathesis Polymerization.

Ring-opening metathesis polymerization (ROMP) is a powerful method to graft various types of polymer chains to a given surface. While surface-initiated ROMP (SI-ROMP) serves as an efficient tool for surface modification and is therefore widely reported, the method requires grafting (1) the olefin substrate and (2) the metathesis catalyst to the surface prior to the polymerization with multiple synthetic and work up steps. To overcome this difficulty, we proposed the use of the chain-transfer reaction as an alternative method for surface modification. Terminal olefins are grafted to the surface without the need to graft the metathesis catalysts, and polymers with olefin backbones are polymerized and grafted simultaneously via both ROMP and chain transfer (cross-metathesis between olefins from backbones and surfaces). Compared to SI-ROMP, this surface-chain transfer ROMP (SC-ROMP) method avoids grafting the catalyst and growing polymer chains from the surface and could be achieved in a single step. Various types of surfaces like carbon nanotubes, carbon fibers, graphene nanosheets, and silica microspheres are used for demonstration. We envision that this work could bring a convenient and effective solution to surface modification via ROMP.

Facile, Controllable, and Ultrathin NiFe-LDH In Situ Grown on a Ni Foam by Ultrasonic Self-Etching for Highly Efficient Urine Conversion.

As the primary source of nitrogen pollutants in domestic sewage, urine is also an alternative for H2 production via electrochemical processes. However, it suffers from sluggish kinetics and noble-metal catalyst requirement. Here, we report a non-precious ultrathin NiFe-layered double hydroxide catalyst for the remarkable conversion of urea into N2 and H2, which is in situ grown on a Ni foam via ultrasonic self-etching in Fe3+/ethylene glycol (EG). EG regulates the etching rate of Fe3+, resulting in an ultrathin nanosheet structure with the aid of ultrasonication. This structure dramatically promotes the dehydrogenation process via decreasing the nanolayer thickness from 120 to 3.4 nm and leads to a 4.8-fold increase in the generation of active sites. It exhibits record urea oxidation kinetics (390.8 mA·cm-2 at 1.5 V vs RHE) with excellent stability (120 h), which is 11.8 times better than that of commercial Pt/C catalyst (33.1 mA·cm-2). Tests with real urine at 20 mA cm-2 achieve 74% total nitrogen removal and 2853 µmol·h-1 of H2 production. This study provides an attractive landscape for producing H2 by consuming urine biowastes.

Superhydrophobic photothermal icephobic surfaces based on candle soot.

Ice accumulation causes various problems in our daily life for human society. The daunting challenges in ice prevention and removal call for novel efficient antiicing strategies. Recently, photothermal materials have gained attention for creating icephobic surfaces owing to their merits of energy conservation and environmental friendliness. However, it is always challenging to get an ideal photothermal material which is cheap, easily fabricating, and highly photothermally efficient. Here, we demonstrate a low-cost, high-efficiency superhydrophobic photothermal surface, uniquely based on inexpensive commonly seen candle soot. It consists of three components: candle soot, silica shell, and polydimethylsiloxane (PDMS) brushes. The candle soot provides hierarchical nano/microstructures and photothermal ability, the silica shell strengthens the hierarchical candle soot, and the grafted low-surface-energy PDMS brushes endow the surface with superhydrophobicity. Upon illumination under 1 sun, the surface temperature can increase by 53 °C, so that no ice can form at an environmental temperature as low as -50 °C and it can also rapidly melt the accumulated frost and ice in 300 s. The superhydrophobicity enables the melted water to slide away immediately, leaving a clean and dry surface. The surface can also self-clean, which further enhances its effectiveness by removing dust and other contaminants which absorb and scatter sunlight. In addition, after oxygen plasma treatment, the surface can restore superhydrophobicity with sunlight illumination. The presented icephobic surface shows great potential and broad impacts owing to its inexpensive component materials, simplicity, ecofriendliness, and high energy efficiency.

Ir-Catalyzed Enantioselective Synthesis of gem-Diborylalkenes Enabled by 1,2-Boron Shift.

Asymmetric cross-couplings based on 1,2-carbon migration from B-ate complexes have been developed efficiently to access valuable organoboronates. However, enantioselective reactions triggered by 1,2-boron shift have remained to be unaddressed synthetic challenge. Here, Ir-catalyzed asymmetric allylic alkylation enabled by 1,2-boron shift was developed. In this reaction, we disclosed that excellent enantioselectivities were achieved through an interesting dynamic kinetic resolution (DKR) process of allylic carbonates at the elevated temperature. Notably, the highly valuable (bis-boryl)alkenes have enabled an array of diversifications to access versatile molecules. Extensive experimental and computational studies were conducted to elucidate the reaction mechanism of DKR process and clarify the origin of excellent enantioselectivities.

Aptamers Entirely Built from Therapeutic Nucleoside Analogues for Targeted Cancer Therapy.

Owing to the specific and high binding affinity of aptamers to their targets, aptamer-drug conjugates (ApDCs) have emerged as a promising drug delivery system for targeted cancer therapy. However, in a conventional ApDC, the aptamer segment usually just serves as a targeting moiety, and only a limited number of drug molecules are sequentially conjugated to the oligonucleotide, giving a relatively low drug loading capacity. To address this challenge, herein we employ four clinically approved nucleoside analogues, including clofarabine (Clo), ara-guanosine (AraG), gemcitabine (Ge), and floxuridine (FdU), to replace all natural nucleosides in aptamer sequences, generating a series of whole drug-constituted DNA-like oligomers that are termed drugtamers. Similar to their parent aptamers, the obtained drugtamers maintain the targeting capability and can specifically bind to the target receptors overexpressed on the cancer cell surface. With 100% drug loading ratio, active targeting capability, and enzyme-mediated release of active therapeutics, our drugtamers can strongly induce the apoptosis of cancer cells and inhibit the tumor progression, which enables a new potential for a better targeted cancer therapy.

DNA Zipper Mediated Membrane Fusion for Rapid Exosomal MiRNA Detection.

Accurate and reliable detection of exosomal miRNA can serve as a promising method for early diagnosis of disease and evaluation of therapeutic effects. However, current exosomal miRNA detection methods commonly involve exosome enrichment, containing RNA extraction, and qRT-PCR based quantification, which are expensive and time-consuming. Herein, we develop a DNA zipper-mediated membrane fusion approach for rapid exosomal miRNA detection and cancer diagnosis. First, a lipid vesicle probe containing miR21-targeting molecular beacons (MBs) is constructed and further loaded with zipper DNA constructs (ZDCs) on its surface. Meanwhile, complementary zipper DNA constructs (cZDCs) are introduced on the exosome of interest. Upon mixing them together, zipping between ZDC and cZDC induces the membrane fusion of exosomes and vesicle probes, triggering the recognition of exosomal miR21 by contained MBs and fluorescence emission that can be conveniently detected within 30 min. Importantly, with the assistance of flow cytometry, miR21-overexpressed tumor exosomes derived from either cell culture medium or clinical patient serums can be distinguished from exosomes secreted from normal cells. This approach provides a convenient way to accurately detect the exosomal miRNA, which may hold great potential in liquid biopsy for early cancer diagnosis and monitoring the therapeutic effects during the treatments.

DNA Base Pairing-Inspired Supramolecular Nanodrug Camouflaged by Cancer-Cell Membrane for Osteosarcoma Treatment.

Osteosarcoma (OS) is one of the most common bone malignant tumors which mainly develops in adolescents. Although neoadjuvant chemotherapy has improved the prognosis of patients, numerous chemotherapeutic challenges still limit their use. Here, inspired by the Watson-Crick base pairing in nucleic acids, hydrophobic (methotrexate) and hydrophilic (floxuridine) chemo-drugs are mixed and self-assembled into M:F nanoparticles (M:F NPs) through molecular recognition. Then, the obtained NPs are co-extruded with membranes derived from OS cells to form cancer-cell membrane-coated NPs (CCNPs). With protected membranes at the outer layer, CCNPs are highly stable in both physiological and weak acid tumor conditions and possess homologous tumor targeted capability. Furthermore, the proteomic analysis first identifies over 400 proteins reserved in CCNPs, most of them participating in tumor cell targeting and adhesion processes. In vitro studies reveal that CCNPs significantly inhibit the PI3K/AKT/mTOR pathway, which promotes cell apoptosis and cell cycle arrest. More importantly, cell membrane camouflage significantly prolongs the circulation half-life of CCNPs, elevates the drug accumulation at tumor sites, and promotes anti-tumor efficacy in vivo. As a convenient and effective strategy to construct a biomimetic NP with high drug loading ratio, the CCNPs provide new potentials for precise and synergistic antitumor treatment.

Rapid Conversion of Co2+ to Co3+ by Introducing Oxygen Vacancies in Co3O4 Nanowire Anodes for Nitrogen Removal with Highly Efficient H2 Recovery in Urine Treatment.

Urine is a nitrogenous waste biomass but can be used as an appealing alternative substrate for H2 recovery. However, urine electrolysis suffers from sluggish kinetics and requires alkaline condition. Herein, we report a novel system to decompose urine to H2 and N2 under neutral conditions mediated by Cl• using oxygen-vacancy-rich Co3O4 nanowire (Ov-Co3O4) anodes and CuO nanowire cathodes. The Co2+/Co3+ cycle in Co3O4 activates Cl- in urine to Cl•, which rapidly and selectively converts urea into N2. Thus, electron transfer is boosted for H2 production, eliminating the kinetic limitations. The shuttle of Co2+ to Co3+ is the key step for Cl• yield, which is accelerated due to the introduction of Ov. Electrochemical analysis shows that Ov induces positive charge on the Co center; therefore, Co2+ loses electrons more efficiently to form Co3+. H2 production in this system reaches 716 µmol h-1, which is 320% that of non-radical-mediated urine electrolysis. The utilization of Ov-Co3O4 further enhances H2 generation, which is 490 and 210% those of noble Pt and RuO2, respectively. Moreover, urine is effectively degraded in 90 min with the total nitrogen removal of 95.4%, and N2 is the final product. This work provides new insights for efficient and low-cost recovery of H2 and urine remediation.

Inorganic-Ligand Quantum Dots Meet Inorganic-Ligand Semiconductor Nanoplatelets: A Promising Fusion to Construct All-Inorganic Assembly.

By the reaction of inorganic-ligand CdS/Cd2+ quantum dots (QDs) with inorganic-ligand CdSe/CdS/S2- nanoplatelets (NPLs), semiconductor CdS QDs were fused with CdSe/CdS NPLs to yield all-inorganic assemblies, accompanied by great photoluminescence-enhancement. These all-inorganic assemblies facilitate charge transport between each other and open up interesting prospects with electronic and optoelectronic nanodevices.

In situ localization of alkaline phosphatase activity in tumor cells by an aggregation-induced emission fluorophore-based probes.

In situ detection of certain specific enzyme activities in cells is deeply attached to tumor diagnosis. Conventional enzyme-responsive fluorescent probes have difficulty detecting targeted enzymes in situ in cells due to the low detection accuracy caused by the spread of fluorescence probes. In order to solve this problem, we have designed and synthesized an enzyme-responsive, water-soluble fluorescent probe with AIE characteristics, which could aggregate and precipitate to produce in situ fluorescence when reacting with the targeted enzyme in cells. The AIE fluorophore (TPEQH) was utilized to design the enzyme-responsive, fluorescent probe (TPEQHA) by introducing a phosphate group on to it, which could be specifically decomposed by the targeted enzyme, namely alkaline phosphatase (ALP). In tumor cells, TPEQH was highly produced due to the interaction of phosphate on the TPEQHA and the overexpressed ALP. Water-insoluble TPEQH then precipitated and release fluorescence in situ, thereby successfully detecting the ALP. Furthermore, the expression level of ALP could be determined by the fluorescence intensity of TPEQH with higher accuracy due to the inhibition of TPEQH leak, which demonstrated a potential application of in suit ALP detection in both clinical diagnosis and scientific research of tumor.

The Effects of Inhibition of MicroRNA-375 in a Mouse Model of Doxorubicin-Induced Cardiac Toxicity.

BACKGROUND Doxorubicin-induced myocardial toxicity is associated with oxidative stress, cardiomyocyte, apoptosis, and loss of contractile function. Previous studies showed that microRNA-375 (miR-375) expression was increased in mouse models of heart failure and clinically, and that inhibition of miR-375 reduced inflammation and increased survival of cardiomyocytes. This study aimed to investigate the effects and mechanisms of inhibition of miR-375 in a mouse model of doxorubicin-induced cardiac toxicity in vivo and in doxorubicin-treated rat and mouse cardiomyocytes in vitro. MATERIAL AND METHODS The mouse model of doxorubicin-induced cardiac toxicity was developed using an intraperitoneal injection of doxorubicin (15 mg/kg diluted in 0.9% saline) for eight days. Treatment was followed by a single subcutaneous injection of miR-375 inhibitor. H9c2 rat cardiac myocytes and adult murine cardiomyocytes (AMCs) were cultured in vitro and treated with doxorubicin, with and without pretreatment with miR-375 inhibitor. RESULTS Doxorubicin significantly upregulated miR-375 expression in vitro and in vivo, and inhibition of miR-375 re-established myocardial redox homeostasis, prevented doxorubicin-induced oxidative stress and cardiomyocyte apoptosis, and activated the PDK1/AKT axis by reducing the direct binding of miR-375 to 3' UTR of the PDK1 gene. Inhibition of PDK1 and AKT abolished the protective role of miR-375 inhibition on doxorubicin-induced oxidative damage. CONCLUSIONS Inhibition of miR-375 prevented oxidative damage in a mouse model of doxorubicin-induced cardiac toxicity in vivo and in doxorubicin-treated rat and mouse cardiomyocytes in vitro through the PDK1/AKT signaling pathway.

Hepatic Microwave Ablation-Induced Tumor Destruction and Animal End Point Survival Can Be Improved by Suppression of Heat Shock Protein 90.

OBJECTIVES: To investigate the effect of heat shock protein 90 (HSP90) modulation on tumor necrosis, apoptosis, tumor growth delay, and end point survival by combining microwave ablation (MWA) with an HSP90 inhibitor in a nude mouse model. METHODS: This study was approved by the Ethics Committee. Forty mice with HepG2 subcutaneous xenograft tumors (10 ± 1 mm) were randomized into 4 groups: (1) no treatment, (2) MWA only, (3) the HSP90 inhibitor ganetespib only, and (4) ganetespib combined with MWA. Tumors were harvested 24 hours after treatment, and gross coagulation diameters were measured. The effect of ganetespib on HSP90 and caspase 3 expression in the periablational rim was assessed. Another 40 mice with the same tumors and groupings were observed after treatment. Tumor growth curve and Kaplan-Meier survival analyses were performed with a tumor diameter of 2.2 cm and 40 days of survival as the defined survival end points. RESULTS: Combination treatment significantly increased the coagulation size compared to tumors treated with MWA or ganetespib alone (P < 0.05). The combination of MWA and ganetespib decreased HSP90 expression and increased cleaved caspase 3 expression 24 hours after treatment. Compared with MWA or ganetespib only, combination treatment could lengthen the end point survival and reduce the tumor growth rate. CONCLUSIONS: Modulation of HSP production can improve MWA-induced tumor apoptosis and destruction, reduce residual tumor growth rates, and prolong end point survival.

Effects of skim milk fermented with Lactobacillus plantarum WW on the constitutions of rats fed a high-fat diet.

This study investigated the effects of Lactobacillus plantarum WW-fermented skim milk (FSM) on the physiques of rats fed a high-fat diet and the mechanism of lipid lowering. Sprague-Dawley rats were randomly divided into a normal diet group (A), a high-fat diet group (B), a skim milk diet group (C), and an L. plantarum WW FSM diet group (D). After 12-wk feeding, we found that treatment with L. plantarum WW FSM could significantly alleviate symptoms in the pathological group. Meanwhile, high-throughput sequencing analysis showed that L. plantarum WW FSM also had a certain regulatory effect on the intestinal microorganisms in rats, which can increase the number of lactic acid bacteria and Bacteroides in the intestine. More importantly, real-time quantitative PCR and Western blot analysis showed that the probiotic was also involved in the expression of genes related to fat metabolism, especially the PPARB and CEBPB genes. Our study supports the hypothesis that the WW strain of L. plantarum could be a potential probiotic to be used in functional foods to alter lipid metabolism and reduce cholesterol levels.

Carrier-Free Delivery of Precise Drug-Chemogene Conjugates for Synergistic Treatment of Drug-Resistant Cancer.

Combinatorial antitumor therapies using different combinations of drugs and genes are emerging as promising ways to overcome drug resistance, which is a major cause for the failure of cancer treatment. However, dramatic pharmacokinetic differences of drugs greatly impede their combined use in cancer therapy, raising the demand for drug delivery systems (DDSs) for tumor treatment. By employing fluorescent dithiomaleimide (DTM) as a linker, we conjugate two paclitaxel (PTX) molecules with a floxuridine (FdU)-integrated antisense oligonucleotide (termed chemogene) to form a drug-chemogene conjugate. This PTX-chemogene conjugate can self-assemble into a spherical nucleic acid (SNA)-like micellular nanoparticle as a carrier-free DDS, which knocks down the expression of P-glycoprotein and subsequently releases FdU and PTX to exert a synergistic antitumor effect and greatly inhibit tumor growth.