Short-range exposure to airborne virus transmission and current guidelines.

After the Spanish flu pandemic, it was apparent that airborne transmission was crucial to spreading virus contagion, and research responded by producing several fundamental works like the experiments of Duguid [J. P. Duguid, J. Hyg. 44, 6 (1946)] and the model of Wells [W. F. Wells, Am. J. Hyg. 20, 611-618 (1934)]. These seminal works have been pillars of past and current guidelines published by health organizations. However, in about one century, understanding of turbulent aerosol transport by jets and plumes has enormously progressed, and it is now time to use this body of developed knowledge. In this work, we use detailed experiments and accurate computationally intensive numerical simulations of droplet-laden turbulent puffs emitted during sneezes in a wide range of environmental conditions. We consider the same emission-number of drops, drop size distribution, and initial velocity-and we change environmental parameters such as temperature and humidity, and we observe strong variation in droplets' evaporation or condensation in accordance with their local temperature and humidity microenvironment. We assume that 3% of the initial droplet volume is made of nonvolatile matter. Our systematic analysis confirms that droplets' lifetime is always about one order of magnitude larger compared to previous predictions, in some cases up to 200 times. Finally, we have been able to produce original virus exposure maps, which can be a useful instrument for health scientists and practitioners to calibrate new guidelines to prevent short-range airborne disease transmission.

Convective mixing in porous media: a review of Darcy, pore-scale and Hele-Shaw studies.

Convection-driven porous media flows are common in industrial processes and in nature. The multiscale and multiphase character of these systems and the inherent nonlinear flow dynamics make convection in porous media a complex phenomenon. As a result, a combination of different complementary approaches, namely theory, simulations and experiments, have been deployed to elucidate the intricate physics of convection in porous media. In this work, we review recent findings on mixing in fluid-saturated porous media convection. We focus on the dissolution of a heavy fluid layer into a lighter one, and we consider different flow configurations. We present Darcy, pore-scale and Hele-Shaw investigations inspired by geophysical processes. While the results obtained for Darcy flows match the dissolution behaviour predicted theoretically, Hele-Shaw and pore-scale investigations reveal a different and tangled scenario in which finite-size effects play a key role. Finally, we present recent numerical and experimental developments and we highlight possible future research directions. The findings reviewed in this work will be crucial to make reliable predictions about the long-term behaviour of dissolution and mixing in engineering and natural processes, which are required to tackle societal challenges such as climate change mitigation and energy transition.

The TU Wien Turbulent Water Channel: Flow control loop and three-dimensional reconstruction of anisotropic particle dynamics.

A horizontal water channel facility was built to study particle dynamics in a turbulent flow. The channel is sufficiently long to produce fully developed turbulence at the test section, and the width-to-height ratio is sufficiently large to avoid the sidewall effect for a large proportion of the cross-section. The system was designed to study the dynamics of complex-shaped particles in wall-bounded turbulence, the characteristics of which can be finely controlled. A maximum bulk velocity of up to 0.8 m s-1 can be achieved, corresponding to a bulk Reynolds number of up to 7 × 104 (shear Reynolds number ≈1580), and flow parameters can be controlled within ±0.1%. The transparent channel design and aluminum structures allow easy optical access, which enables multiple laser and camera arrangements. With the current optical setup, a measurement volume of up to 54 × 14 × 54 mm3 can be imaged and reconstructed with six cameras from the top, bottom, and sides of the channel. Finally, the in-house developed reconstruction and tracking procedure allows us to measure the full motion of complex objects (i.e., shape reconstruction, translational, and rotational motions), and in this instance, it is applied to the case of microscopic, non-isotropic polyamide fibers.

Enhancement of photocurrent generation and open circuit voltage in dye-sensitized solar cells using Li+ trapping species in the gel electrolyte.

The influence of the addition of 12-crown-4 ether in a gel polymer electrolyte based to a PEO copolymer and its application in dye sensitized solar cells were investigated. Introduction of these Li+ trapping species brought beneficial contributions to both V(oc) and J(sc) values, increasing the device's performance.

Kinetic competition in flexible dye sensitised solar cells employing a series of polymer electrolytes.

Transient absorption spectroscopy is employed to study electron transfer dynamics in dye sensitised solar cells employing a series of polymer electrolytes, and correlated with device current-voltage characteristics.

Prophylaxis of venous thromboembolism with low molecular weight heparin in bariatric surgery: a prospective, randomised pilot study evaluating two doses of parnaparin (BAFLUX Study).

BACKGROUND: The optimal dose of low molecular weight heparin (LMWH) to prevent venous thromboembolism (VTE) after bariatric surgery remains controversial. The aim of this multicentre, open-label, pilot study was to evaluate the efficacy and safety of two different doses of the LMWH parnaparin administered to patients undergoing bariatric surgery. METHODS: Patients were randomised to receive 4,250 IU/day (group A) or 6,400 IU/day (group B) of parnaparin s.c. for 7-11 days. Bilateral colour Doppler ultrasound of the lower limb was performed before surgery and at the end of the treatment period. The primary efficacy outcome was a composite of asymptomatic and symptomatic deep vein thrombosis, symptomatic pulmonary embolism and death from any cause during treatment. The primary safety endpoint was major and clinically relevant non-major bleeding. RESULTS: A total of 258 patients underwent randomization; 8 subjects were excluded following the safety analysis. One hundred thirty-one patients [106 females; mean age, 40.3 years (standard deviation (SD) ±9.6); mean body mass index (BMI), 44.6 kg/m(2) (SD ±5.4)] were assigned to group A and 119 patients [93 females; mean age, 41.5 years (SD ±9.9); mean BMI, 44.2 kg/m(2) (SD ±5.4)] were assigned to group B. The rate of the primary efficacy outcome was 1.5% (two cases; 95 % confidence interval (CI), 0.2-6.0%) in group A as compared with 0.8% (one case; 95% CI, 0.4-5.3%) in group B (p = ns). The composite incidence of major bleeding and clinically relevant non-major bleeding was 6.1% (eight cases; 95% CI, 2.9-12.1%) in group A and 5.0% (six cases; 95% CI, 2.1-11.1%) in group B (p = ns). CONCLUSIONS: A parnaparin dose of 4,250 IU/day seems suitable for VTE prevention in patients undergoing bariatric surgery.

Pharmacodynamics of low molecular weight heparin in patients undergoing bariatric surgery: a prospective, randomised study comparing two doses of parnaparin (BAFLUX study).

BACKGROUND: The optimal dose of low-molecular-weight-heparin (LMWH) to prevent venous thromboembolism (VTE) after bariatric surgery remains controversial. AIM: The aim of this study was to evaluate the pharmacodynamic parameters of two doses of the LMWH parnaparin administered to patients undergoing bariatric surgery. METHODS: Patients were enrolled in a multicentre, open label, pilot study and were randomised to receive 4250 IU/day [n=36; 30 females; median age: 38 years (23-56); median BMI: 46.7 Kg/m(2) (36.5-58.8)] or 6400 IU/day [n=30; 24 females; median age: 42 years (22-63); median BMI: 43.7 Kg/m(2) (36.1-64.1)] of parnaparin s.c. for 7-11 days. The pharmacodynamic effects of parnaparin were analysed by measuring the anti Factor Xa activity on day 0 (12 hours after the first parnaparin injection), day 4 and day 6 after surgery (before and 4 hours after parnaparin administration). RESULTS: In 98.3% of patients receiving 4250 IU/day the peak anti-Xa levels were in the range of 0.1-0.4 IU/ml. Higher anti-Xa levels were observed in patients receiving 6400 IU/day: in 62.3% of these patients the peak anti-Xa levels were greater than 0.4 IU/ml. The anti-Xa levels measured 4 hours after injection on days 4 and 6 were not statistically correlated with BMI for either dose of parnaparin (p=0.077 and p=0.401 for 4250 or 6400 IU/day, respectively). CONCLUSION: The dose of 4250 IU/day seems adequate to achieve prophylactic anti-Xa levels in morbid obese patients undergoing bariatric surgery. Conversely, most of the patients receiving 6.400 IU/day show anti-Xa levels higher than the recommended prophylactic values.

Electrochemical and structural characterization of polymer gel electrolytes based on a PEO copolymer and an imidazolium-based ionic liquid for dye-sensitized solar cells.

Polymer electrolytes based on mixtures of poly(ethylene oxide-co-propylene oxide) and 1-methyl-3-propyl-imidazolium iodide (MPII) were investigated, aiming at their application in dye-sensitized solar cells (DSSC). The interactions between the copolymer and the ionic liquid were analyzed by infrared spectroscopy and (1)H NMR. The results show interactions between the ether oxygen in the polymer and the hydrogen in the imidazolium cations. The ionic conductivities, electrochemical behaviors, and thermal properties of the electrolytes containing different concentrations of MPII were investigated. The electrolyte containing 70 wt % MPII presented the highest ionic conductivity (2.4 x 10(-3) S cm(-1)) and a diffusion coefficient of 1.9 x 10(-7) cm(2) s(-1). The influence of LiI addition to the electrolytes containing different concentrations of MPII was also investigated. The DSSC assembled with the electrolyte containing 70 wt % MPII showed an efficiency of 3.84% at 100 mW cm(-2). The stability of the devices for a period of 30 days was also evaluated using sealed cells. The devices assembled with the electrolyte containing less ionic liquid showed to be more stable.