Hierarchical Zeolites Prepared Using a Surfactant-Mediated Strategy: ZSM-5 vs. Y as Catalysts for Friedel-Crafts Acylation Reaction.

Hierarchical ZSM5 and Y zeolites were prepared through a surfactant-mediated strategy with NH4OH changing the duration of the treatment and the amount of CTAB surfactant and taking as reference multiples of the critical micellar concentration (CMC). The materials were characterized using powder X-ray diffraction, N2 adsorption isotherms at -196 °C, and SEM and TEM microscopy. The catalytic performance was evaluated in Friedel-Crafts acylation of furan with acetic anhydride at 80 °C. The alkaline surfactant-mediated treatment had different effects on the two zeolites. For ZSM5, the CTAB molecular aggregates can hardly diffuse inside the medium-size pores, leading mainly to intercrystalline mesoporosity and increased external surface area, with no positive catalytic impact. On the other hand, for large-pore Y zeolite, the CTAB molecular aggregates can easily diffuse and promote the rearrangement of crystal units around micelles, causing the enlargement of the pores, i.e., intracrystalline porosity. The optimized Y-based sample, treated for 12 h with a CTAB amount 32 times the CMC, shows an increase in product yield and rate constant that was not observed when a higher amount of surfactant was added. The reuse of spent catalysts upon thermal treatment at 400 °C shows a regeneration efficiency around 90%, showing good potentialities for the modified catalysts.

Fluorescence determination of tannic acid imprinted in conjugated hypercrosslinked polymers by Friedel-Crafts acylation.

A molecularly imprinted hypercrosslinked polymer (HCP) was synthesized from the polymerization of mesitylene monomer, terephthaloyl chloride crosslinker, and tannic acid (TA) template through FeCl3-catalyzed Friedel-Crafts acylation. The TA-imprinted HCP (TAHCP) was capable of IUPAC Type I mesoporosity, with specific surface area of 1258 m2 g-1, monolayer adsorption capacity of 289 cm2 g-1, pore sizes ranging from 4.4 to 12.6 Å, amorphous morphology, and characteristic absorption and emission bands. The extended π-conjugation framework of TAHCP was endowed with 385-nm fluorescent emission at 310-nm excitation. The fluorescence intensity of TAHCP could be dynamically quenched by TA and was linearly correlated with 20-1000 nM TA concentrations on the Stern-Volmer plot in the optimized conditions of pH 5.5 buffer, 100 µg mL-1 TAHCP, and 3.5 min equilibrium. The relative standard deviation (RSD) for 50 nM TA was 3.4% (n = 5), and the limit of detection was 6.2 nM based on the 3σ of the TA blanks). For 50nM TA, the imprinted factor was calculated to be 7.8, and the selectivity for 250 nM interferents, including ions, organic acids, saccharides, amino acids, and caffeine, which are commonly found in beverages, was 7.5-9.5, except for gallic acid (1.2). The recoveries of TA spiked in tea and juice beverages at three levels (10-150 nM) were 93.6-101.9% (RSD = 3.6-4.3%).

Novel Carboxylation Method for Polyetheretherketone (PEEK) Surface Modification Using Friedel-Crafts Acylation.

Recently, polyetheretherketone (PEEK) has shown promising dental applications. Surface treatment is essential for dental applications owing to its poor surface energy and wettability; however, no consensus on an effective treatment method has been achieved. In this study, we attempted to carboxylate PEEK sample surfaces via Friedel-Crafts acylation using succinic anhydride and AlBr3. The possibility of further chemical modifications using carboxyl groups was examined. The samples were subjected to dehydration-condensation reactions with 1H,1H-pentadecafluorooctylamine and N,N'-dicyclohexylcarbodiimide. Furthermore, the sample's surface properties at each reaction stage were evaluated. An absorption band in the 3300-3500 cm-1 wavenumber region was observed. Additionally, peak suggestive of COOH was observed in the sample spectra. Secondary modification diminished the absorption band in 3300-3500 cm-1 and a clear F1s signal was observed. Thus, Friedel-Crafts acylation with succinic anhydride produced carboxyl groups on the PEEK sample surfaces. Further chemical modification of the carboxyl groups by dehydration-condensation reactions is also possible. Thus, a series of reactions can be employed to impart desired chemical structures to PEEK surfaces.

Friedel-Crafts acylation of benzene derivatives in tunable aryl alkyl ionic liquids (TAAILs).

An iron(III) chloride hexahydrate-catalyzed Friedel-Crafts acylation of benzene derivatives in tunable aryl alkyl ionic liquids (TAAILs) has been developed. Through optimization of the metal salt, reaction conditions and ionic liquids, we were able to design a robust catalyst system that tolerates different electron-rich substrates under ambient atmosphere and allows for a multigram scale.

Phenol-Benzoxazolone bioisosteres: Synthesis and biological evaluation of tricyclic GluN2B-selective N-methyl- d-aspartate receptor antagonists.

Tricyclic tetrahydrooxazolo[4,5-h]-[3]benzazepin-9-ols 22 were designed as phenol bioisosteres of tetrahydro-3-benzazepine-1,7-diols. Key features of the synthesis are the introduction of the trifluoromethylsulfonyl and allyl protective groups at the heterocyclic N-atoms. Two methods were developed to convert the triflyl-protected ketone 16 into tricyclic alcohols 21 bearing various N-substituents. According to the first method, trifluoromethanesulfinate was removed by K2 CO3 . Following the selective reduction of the imino moiety of 17 with NaBH(OAc)3 afforded the aminoketone 18, which was reductively alkylated and reduced. According to the second method, both the imine and the ketone of the iminoketone 17 were reduced with NaBH4 to yield the aminoalcohol 20, which was alkylated or reductively alkylated to form tertiary amines 21f-21r. In the last step, the allyl protective group of 21 was removed with RhCl3 and HCl to obtain oxazolones 22. In receptor binding studies using [3 H]ifenprodil as radioligand ketone, 22m showed the highest GluN2B affinity (Ki = 88 nM). However, a reduced affinity toward GluN2B subunit-containing N-methyl- d-aspartate (NMDA) receptors was observed for oxazolones 22 compared to bioisosteric 3-benzazepine-1,7-diols. High selectivity of 22m for the ifenprodil binding site of GluN2B-NMDA receptors over the 1-(1-phenylcyclohexyl)piperidine binding site and σ2 receptors was observed, but only negligible selectivity over σ1 receptors. In two-electrode voltage clamp experiments, the 4-phenylbutyl derivative 22d (Ki = 422 nM) demonstrated 80% inhibition of ion flux at a concentration of 1 µM. The differences in GluN2B affinity and inhibitory activity are explained by docking studies. In conclusion, 22d is regarded as a novel scaffold of highly potent GluN1/GluN2B antagonists.

Synthesis of oxazolo-annulated 3-benzazepines designed by merging two negative allosteric NMDA receptor modulators.

To improve the metabolic stability and receptor selectivity of ifenprodil (1), the benzoxazolone moiety of besonprodil (2) and the 3-benzazepone moiety of WMS-1410 (3) were merged to obtain oxazolobenzazepines of type 4. The 5-(hydroxyethyl)benzoxazolone 7 representing the first key intermediate was prepared in four steps starting with the 4-(2-hydroxyethyl)phenol (8). Mitsunobu reaction of primary alcohol 7 with N-sulfonylated glycine esters established the necessary side chain. The intramolecular Friedel-Crafts acylation of acid 12a containing the N-tosyl protective group led upon decarbonylation exclusively to the tricyclic tetrahydroisoquinoline 14. Protection of the amino moiety by the stronger electron-withdrawing triflyl group resulted in the desired 3-benzazepine 15 without the formation of analogous isoquinoline. The triflyl protective group was cleaved off by K2 CO3 -induced elimination of trifluoromethanesulfinate. In a one-pot three-step procedure, various oxazolobenzazepinediones 15 were obtained, which were reduced to afford the desired secondary alcohols 18.

Fabrication of carbonyl-functional hypercrosslinked polymers as solid-phase extraction sorbent for enrichment of chlorophenols from water, honey and beverage samples.

Three carbonyl-functional novel hypercrosslinked polymers (HCP-TPS, HCP-TPA, and HCP-TPP) were successfully fabricated through an one-step Friedel-Crafts acylation reaction by copolymerizing paraphthaloyl chloride with triphenylsilane, triphenylamine, and triphenylphosphine, respectively. The resultant HCPs contained plenty of carbonyl-functional groups. Among the series of such HCPs, HCP-TPS displayed the best adsorption capability to chlorophenols (CPs), and thus it was employed as solid-phase extraction (SPE) adsorbent for enrichment of chlorophenols from water, honey, and white peach beverage prior to determination by high-performance liquid chromatography. Under the optimal conditions, the detection limits of the method (S/N = 3) were 0.15-0.3 ng mL-1 for tap water and leak water, 2.5-6.0 ng g-1 for honey sample and 0.4-0.6 ng mL-1 for white peach beverage sample. The recoveries of CPs in the spiked water, honey samples, and white peach beverage were in the range of 89.0-108.4%, 81.4-118.2%, and 85.0-113.5%, respectively. This work provides a new strategy for constructing functionalized HCPs as efficient SPE adsorbents. In this work, three novel hypercrosslinked polymers (HCPs) were synthesized by the Friedel-Crafts alkylation reaction (paraphthaloyl chloride as the alkylating agent, triphenylsilane, triphenylamine, and triphenylphosphine as the aromatic units). Then, HCP-TPS was applied to soild-phase extraction sorbent for enrichment CPs from water, honey, and white peach beverage samples.

Tunable Aryl Imidazolium Recyclable Ionic Liquid with Dual Brønsted-Lewis Acid as Green Catalyst for Friedel-Crafts Acylation and Thioesterification.

Unique tunable aryl imidazolium ionic liquids successfully catalyzed Friedel-Crafts acylation and thioesterification in sealed tubes. These reactions can form a C-C bond and a C-S bond with high atom economy. Ionic liquids exhibited high activity and catalyzed essential reactions with good to excellent yields while retaining their catalytic activities for recycling.

Probing Substrate/Catalyst Effects Using QSPR Analysis on Friedel-Crafts Acylation Reactions over Hierarchical BEA Zeolites.

Attempts to optimize heterogeneous catalysis often lack quantitative comparative analysis. The use of kinetic modelling leads to rate (k) and relative sorption equilibrium constants (K), which can be further rationalized using Quantitative Structure-Property Relationships (QSPR) based on Multiple Linear Regressions (MLR). Friedel-Crafts acylation using commercial and hierarchical BEA zeolites as heterogeneous catalysts, acetic anhydride as the acylating agent, and a set of seven substrates with different sizes and chemical functionalities were herein studied. Catalytic results were correlated with the physicochemical properties of substrates and catalysts. From this analysis, a robust set of equations was obtained allowing inferences about the dominant factors governing the processes. Not entirely surprising, the rate and sorption equilibrium constants were found to be explained in part by common factors but of opposite signs: higher and stronger adsorption forces increase reaction rates, but they also make the zeolite active sites less accessible to new reactant molecules. The most relevant parameters are related to the substrates' molecular size, which can be associated with different reaction steps, namely accessibility to micropores, diffusion capacity, and polarizability of molecules. The relatively large set of substrates used here reinforces previous findings and brings further insights into the factors that hamper/speed up Friedel-Crafts reactions in heterogeneous media.

Structure and Catalytic Mechanism of a Bacterial Friedel-Crafts Acylase.

C-C bond-forming reactions are key transformations for setting up the carbon frameworks of organic compounds. In this context, Friedel-Crafts acylation is commonly used for the synthesis of aryl ketones, which are common motifs in many fine chemicals and natural products. A bacterial multicomponent acyltransferase from Pseudomonas protegens (PpATase) catalyzes such Friedel-Crafts C-acylation of phenolic substrates in aqueous solution, reaching up to >99 % conversion without the need for CoA-activated reagents. We determined X-ray crystal structures of the native and ligand-bound complexes. This multimeric enzyme consists of three subunits: PhlA, PhlB, and PhlC, arranged in a Phl(A2 C2 )2 B4 composition. The structure of a reaction intermediate obtained from crystals soaked with the natural substrate 1-(2,4,6-trihydroxyphenyl)ethanone together with site-directed mutagenesis studies revealed that only residues from the PhlC subunits are involved in the acyl transfer reaction, with Cys88 very likely playing a significant role during catalysis. These structural and mechanistic insights form the basis of further enzyme engineering efforts directed towards enhancing the substrate scope of this enzyme.

2-Methyltetrahydro-3-benzazepin-1-ols - The missing link in SAR of GluN2B selective NMDA receptor antagonists.

The NMDA receptor containing GluN2B subunits represents a promising target for the development of drugs for the treatment of various neurological disorders including neurodegenerative diseases. In order to study the role of CH3 and OH moieties trisubstituted tetrahydro-3-benzazepines 4 were designed as missing link between tetra- and disubstituted 3-benzazepines 2 and 5. The synthesis of 4 comprises eight reaction steps starting from alanine. The intramolecular Friedel-Crafts acylation to obtain the ketone 12 and the base-catalyzed elimination of trifluoromethanesulfinate (CF3SO2-) followed by NaBH4 reduction represent the key steps. The GluN2B affinity of the cis-configured 3-benzazepin-1-ol cis-4a with a 4-phenylbutyl side chain (Ki = 252 nM) is considerably lower than the GluN2B affinity of (R,R)-2 (Ki = 17 nM) indicating the importance of the phenolic OH moiety for the interaction with the receptor protein. Introduction of an additional CH3 moiety in 2-position led to a slight decrease of GluN2B affinity as can be seen by comparing the affinity data of cis-4a and 5. The homologous phenylpentyl derivative cis-4b shows the highest GluN2B affinity (Ki = 56 nM) of this series of compounds. According to docking studies cis-4a adopts the same binding mode as the cocrystallized ligand ifenprodil-keto 1A and 5 at the interface of the GluN2B and GluN1a subunits. The same crucial H-bonds are formed between the C(O)NH2 moiety of Gln110 within the GluN2B subunit and the protonated amino moiety and the OH moiety of (R,R)-cis-4a.

Selective, C-3 Friedel-Crafts acylation to generate functionally diverse, acetylated Imidazo[1,2-a]pyridine derivatives.

Carbon-carbon bonds are integral for pharmaceutical discovery and development. Frequently, C-C bond reactions utilize expensive catalyst/ligand combinations and/or are low yielding, which can increase time and expenditures in pharmaceutical development. To enhance C-C bond formation protocols, we developed a highly efficient, selective, and combinatorially applicable Friedel-Crafts acylation to acetylate the C-3 position of imidazo[1,2-a]pyridines. The reaction, catalyzed by aluminum chloride, is both cost effective and more combinatorial friendly compared to acetylation reactions requiring multiple, stoichiometric equivalents of AlCl3. The protocol has broad application in the construction of acetylated imidazo[1,2-a]pyridines with an extensive substrate scope. All starting materials are common and the reaction requires inexpensive, conventional heating methods for adaptation in any laboratory. Further, the synthesized compounds are predicted to possess GABA activity through a validated, GABA binding model. The developed method serves as a superior route to generate C-3 acetylated imidazo[1,2-a]pyridine building-blocks for combinatorial synthetic efforts.

First synthesis of (±)-myristicyclin A.

The first synthesis of myristicyclin A, which was isolated from the Papua New Guinean plant Horsfieldia spicata, is described. The synthesis features acid-mediated hydroarylation reaction to form a dihydrocoumarin moiety, construction of the 2,8-dioxabicyclo[3.3.1]nonane skeleton under acidic conditions, and regioselective Friedel-Crafts acylation at a later stage.

Novel Fluorophores based on Regioselective Intramolecular Friedel-Crafts Acylation of the Pyrene Ring Using Triflic Acid.

The extension of the pyrene ring from dimethyl 2,2'-(pyrene-1,6-diyl)dibenzoate derivatives by an intramolecular Friedel-Crafts acylation can be realized in an efficient and regioselective manner using triflic acid as proton source. Naphtho-tetracenone derivatives are obtained in high yields at room temperature while Bis-tetracene-diones are prepared upon heating. Both products display interesting fluorescence properties in the visible range with quantum yields varying from 50 to 60 %.

Synthesis of Chiral TFA-Protected α-Amino Aryl-Ketone Derivatives with Friedel-Crafts Acylation of α-Amino Acid N-Hydroxysuccinimide Ester.

Chiral N-protected α-amino aryl-ketones are one of the useful precursors used in the synthesis of various biologically active compounds and can be constructed via Friedel-Crafts acylation of N-protected α-amino acids. One of the drawbacks of this reaction is the utilization of toxic, corrosive and moisture-sensitive acylating reagents. In peptide construction via amide bond formation, N-hydroxysuccinimide ester (OSu), which has high storage stability, can react rapidly with amino components and produces fewer side reactions, including racemization. This study reports the first synthesis and utilization of N-trifluoroacetyl (TFA)-protected α-amino acid-OSu as a potential acyl donor for Friedel-Crafts acylation into various arenes. The TFA-protected isoleucine derivative and its diastereomer TFA-protected allo-isoleucine derivative were investigated to check the retention of α-proton chirality in the Friedel-Crafts reaction. Further utilization of OSu in other branched-chain and unbranched-chain amino acids results in an adequate yield of TFA-protected α-amino aryl-ketone without loss of optical purity.

A Simple, Effective, Green Method for the Regioselective 3-Acylation of Unprotected Indoles.

A fast and green method is developed for regioselective acylation of indoles in the 3-position without the need for protection of the NH position. The method is based on Friedel-Crafts acylation using acid anhydrides. The method has been optimized, and Y(OTf)3 in catalytic amounts is found to be the best catalyst together with the commercially available ionic liquid [BMI]BF4 (1-butyl-3-methylimidazolium tetrafluoro-borate) as solvent. The reaction is completed in a very short time using monomode microwave irradiation. The catalyst can be reused up to four times without significant loss of activity. A range of substituted indoles are investigated as substrates, and thirteen new compounds have been synthesized.

A three-minute synthesis and purification of ibuprofen: pushing the limits of continuous-flow processing.

In a total residence time of three minutes, ibuprofen was assembled from its elementary building blocks with an average yield of above 90% for each step. A scale-up of this five-stage process (3 bond-forming steps, one work-up, and one in-line liquid-liquid separation) provided ibuprofen at a rate of 8.09 g h(-1) (equivalent to 70.8 kg y(-1)) using a system with an overall footprint of half the size of a standard laboratory fume hood. Aside from the high throughput, several other aspects of this synthesis expand the capabilities of continuous-flow processing, including a Friedel-Crafts acylation run under neat conditions and promoted by AlCl3, an exothermic in-line quench of high concentrations of precipitation-prone AlCl3, liquid-liquid separations run at or above 200 psi to provide solvent-free product, and the use of highly aggressive oxidants, such as iodine monochloride. The use of simple, inexpensive, and readily available reagents thus affords a practical synthesis of this important generic pharmaceutical.

Synthesis of [2H7]indatraline.

Deuterium-labelled indatraline was synthesized in high efficiency employing a Friedel-Crafts alkylation of [(2)H6]benzene with (E)-3-(3,4-dichlorophenyl)acrylic acid as a key step. The desired labelling of the final compound was ascertained in two ways, by incorporation of [(2)H6]benzene in the target molecule and additionally by deuterium transfer to the non-deuterated aryl moiety of the Friedel-Crafts alkylation product from [(2)H6]benzene, the latter thus serving as reagent and solvent.

Superoxide chemistry revisited: synthesis of tetrachloro-substituted methylenenortricyclenes.

An unexpected reactivity of the superoxide ion leading to the synthesis of tetrachloroaryl/vinyl-substituted nortricyclenes through its dual mode of action has been reported. KO2 was found to be superior and the only reagent to perform this kind of reaction over other conventional bases. Addition of the antioxidant BHT (2,6-di-tert-butyl-4-methylphenol) improved the yields of methylenenortricyclenes. A complete deuterium incorporation was observed in the superoxide-mediated reaction in DMSO-d 6. Friedel-Crafts acylation reactions of 3-methylenenorticyclenes yielded 2-propanone-substituted pentachloronorbornenes.

An efficient access to the synthesis of novel 12-phenylbenzo[6,7]oxepino[3,4-b]quinolin-13(6H)-one derivatives.

An efficient access to the tetracyclic-fused quinoline systems, 12-phenylbenzo[6,7]oxepino[3,4-b]quinolin-13(6H)-one derivatives 4a-l, is described, involving the intramolecular Friedel-Crafts acylation reaction of 2-(phenoxymethyl)-4-phenylquinoline-3-carboxylic acid derivatives 3a-l aided by the treatment with PPA (polyphosphoric acid) or Eaton's reagent. The required starting compound (2) was obtained by Friedländer reaction of 2-aminobenzophenone (1) with 4-chloroethylacetoacetate by using CAN (cerium ammonium nitrate, 10 mol %) as catalyst at room temperature. The substrates 3a-l were prepared through one-pot reaction of ethyl 2-(chloromethyl)-4-phenylquinoline-3-carboxylate (2) and substituted phenols. Our developed strategy, involving a three-step route, offers easy access to tetracyclic-fused quinoline systems in short reaction times, and the products are obtained in moderate to good yields.