Electrostatic-induced green and precise growth of model catalysts.

Crystallographic control of crystals as catalysts with precise geometrical and chemical features is significantly important to develop sustainable chemistry, yet highly challenging. Encouraged by first principles calculations, precise structure control of ionic crystals could be realized by introducing an interfacial electrostatic field. Herein, we report an efficient in situ dipole-sourced electrostatic field modulation strategy using polarized ferroelectret, for crystal facet engineering toward challenging catalysis reactions, which avoids undesired faradic reactions or insufficient field strength by conventional external electric field. Resultantly, a distinct structure evolution from tetrahedron to polyhedron with different dominated facets of Ag3PO4 model catalyst was obtained by tuning the polarization level, and similar oriented growth was also realized by ZnO system. Theoretical calculations and simulation reveal that the generated electrostatic field can effectively guide the migration and anchoring of Ag+ precursors and free Ag3PO4 nuclei, achieving oriented crystal growth by thermodynamic and kinetic balance. The faceted Ag3PO4 catalyst exhibits high performance in photocatalytic water oxidation and nitrogen fixation for valuable chemicals production, validating the effectiveness and potential of this crystal regulation strategy. Such an electrically tunable growth concept by electrostatic field provides new synthetic insights and great opportunity to effectively tailor the crystal structures for facet-dependent catalysis.

Composition-dependent ordering transformations in Pt-Fe nanoalloys.

SignificanceDynamically understanding the microscopic processes governing ordering transformations has rarely been attained. The situation becomes even more challenging for nanoscale alloys, where the significantly increased surface-area-to-volume ratio not only opens up a variety of additional freedoms to initiate an ordering transformation but also allows for kinetic interplay between the surface and bulk due to their close proximity. We provide direct evidence of the microscopic processes controlling the ordering transformation through the surface-bulk interplay in Pt-Fe nanoalloys and new features rendered by variations in alloy composition and chemical stimuli. These results provide a mechanistic detail of ordering transformation phenomena which are widely relevant to nanoalloys as chemical ordering occurs in most multicomponent materials under suitable environmental bias.

Toward Defect-Free Nanoimprinting.

Nanoimprinting large-area structures, especially high-density features like meta lenses, poses challenges in achieving defect-free nanopatterns. Conventional high-resolution molds for nanoimprinting are often expensive, typically constructed from inorganic materials such as silicon, nickel (Ni), or quartz. Unfortunately, replicated nanostructures frequently suffer from breakage or a lack of definition during demolding due to the high adhesion and friction at the polymer-mold interface. Moreover, mold degradation after a limited number of imprinting cycles, attributed to contamination and damaged features, is a common issue. In this study, a disruptive approach is presented to address these challenges by successfully developing an anti-sticking nanocomposite mold. This nanocomposite mold is created through the co-deposition of nickel atoms and low surface tension polytetrafluoroethylene (PTFE) nanoparticles via electroforming. The incorporation of PTFE enhances the ease of polymer release from the mold. The resulting Ni-PTFE nanocomposite mold exhibits exceptional lubrication properties and a significantly reduced surface energy. This robust nanocomposite mold proves effective in imprinting fine, densely packed nanostructures down to 100 nm using thermal nanoimprinting for at least 20 cycles. Additionally, UV nanoimprint lithography (UV-NIL) is successfully performed with this nanocomposite mold. This work introduces a novel and cost-effective approach to reusable high-resolution molds, ensuring defect-reduction production in nanoimprinting.

Prevalence of type II endoleak after elective endovascular aneurysm repair with polytetrafluoroethylene- or polyester-based endografts.

OBJECTIVE: Type II endoleak is the most frequent complication after endovascular abdominal aneurysm repair. Polytetrafluoroethylene and polyester (PE) are the two most commonly used graft materials in endovascular aneurysm repair (EVAR) devices. Biological properties of the material might influence the appearance and persistence of type II endoleak (T2EL). Therefore, the aim of this study was to evaluate potential differences in the prevalence of T2EL after EVAR between polytetrafluoroethylene (PTFE) and PE endografts in patients electively treated for an infrarenal abdominal aortic aneurysm. METHODS: A single-center, retrospective, observational study was conducted between January 2011 and January 2022. Preoperative, procedural, and follow-up data were derived from electronic health records. Imaging included computed tomography scans, and/or duplex ultrasound examination. The primary end point was the prevalence of T2EL diagnosed within 1 year after EVAR. Secondary end points included the prevalence of T2EL throughout follow-up, early (≤30 days) and late (>30 days) T2EL, the rate of T2EL disappearance during the follow-up period, the prevalence of type I and III endoleak, and T2EL-related reinterventions. RESULTS: Follow-up was available for 394 patients, 245 in the PE and 149 in the PTFE group. The prevalence of T2EL diagnosed within 1 year after endovascular repair was 11.8% in the PE group and 21.5% in the PTFE group (P = .010). There was no significant difference in early (≤30 days) and late (>30 days) T2EL between groups (P = .270 and P = .311). There was no difference in the freedom from endoleak type II reinterventions between groups (P = .877). CONCLUSIONS: The prevalence of T2EL after elective EVAR is significantly higher with the use of PTFE-based endografts compared with PE-based endografts. This difference is mostly based on T2EL diagnosed after 30 days of follow-up.

A Novel Approach of Electrocatalytic Deamination From Aromatic Amide to Diarylimide on Ni-PTFE Modified Electrode.

A hydrophobic Ni-PTFE modified electrode has been prepared by constant current and cathodic electroplating with a nickel sheet as substrate in a PTFE suspension. Then the Ni-PTFE modified electrode was used for electroreduction from aromatic amide to diarylimide. The electrochemical characterizations such as cyclic voltammogram, EIS, polarization curves, and electrode stability have been carried out by electrochemical workstation. The structure of the electroreduction product diarylimide was characterized by 1H NMR, FT-IR, MS(Mass Spectrum), and EA(Elemental Analyzer). Based on the hydrophobicity of the electrode, an approach suggested that the phenyl ketone radical may be formed by electroreductive deamination at the cathode. With the construction of C-N bond by the radical coupling, the electrocatalytic reduction may be comprised of a one-electron process including an ECC (Electrochemical-Chemical-Chemical) process. The electroreduction of aromatic amide to diarylimide may be controlled by both charge migration and concentration polarization. Electrocatalytic reduction of aromatic amides on Ni-PTFE modified electrodes is all well conversion ratio.

Is transvaginal mesh surgery with polytetrafluoroethylene mesh ORIHIME® feasible for anterior pelvic organ prolapse?-Randomized comparative study between ORIHIME® and Polyform™.

OBJECTIVE: Transvaginal mesh surgery for pelvic organ prolapse has been widely performed in Japan, but polypropylene mesh has not been used in Japan since the ban on TVM using polypropylene mesh in the United States. Currently, polytetrafluoroethylene mesh ORIHIME® is the only mesh available for TVM in Japan. Although polytetrafluoroethylene is a safe material, its low coefficient of friction and insufficient adhesion to the surrounding tissue make it difficult to maintain the mesh position when it is used in the transvaginal mesh surgery. The aim of this study was to evaluate the feasibility of TVM-A2 using ORIHIME®. METHODS: One hundred cases of TVM-A2 were included in the study. The patients were randomly assigned to two groups: the ORIHIME® group (Group O) and the PolyformTM group (Group P). With 50 patients in each group, the complications and recurrences up to the fourth year were compared. Surgeries were performed using the TVM-A2 method. Statistical analysis was performed using EZR. RESULTS: There were no significant differences in baseline parameters between the two groups. We observed no perioperative complications, and saw one case of postoperative abscess formation in Group O, which resolved successfully after incision and drainage. The 4-year recurrence rate was significantly higher in Group O. CONCLUSION: As the recurrence rate was significantly higher in Group O, we conclude that TVM-A2 using ORIHIME® which is the same procedure as TVM-A2 using polypropylene mesh is not feasible in repairing the pelvic organ prolapse.

The STING in the tale of Teflon®: Delayed ureteric obstruction after subureteric transurethral injection with polytetrafluoroethylene paste for vesicoureteral reflux.

INTRODUCTION: "Subureteric Teflon INGection" (STING) of polytetrafluoroethylene (PTFE/polytef) paste to treat vesicoureteral reflux (VUR) in children was popularised in 1984. It was later abandoned as an implantation material because of the possibility of migration from the injection site. Giant-cell foreign-body granuloma to Polytef in the bladder is a rare cause of ureteric obstruction. Only a handful of cases have been reported in the literature. METHODS: We performed a prospective analysis of a series of 6 adult patients who had childhood STING and presented with foreign-body granuloma to Polytef in the bladder. We report their clinical presentation, findings and treatment. RESULTS: 1 male and 5 females with a history of STING procedure in childhood for VUR presented in later life with foreign-body granuloma to Polytef. The median age at first STING procedure and at presentation to the Urology Department was 3 and 34 years respectively. The most common clinical presentations were flank pain and urinary tract infection (UTI) and all patients had radiological findings of calcified lesions at the vesicoureteric junction(s). 4 patients had histological findings of giant-cell foreign-body granuloma. 4 patients required definitive ureteric reimplantation. CONCLUSION: Polytef granuloma causing distal ureteric obstruction may give rise to significant morbidity and renal damage. Due to the likelihood of progression of the granuloma, excision and ureteric reimplantation is considered the standard approach in the management of patients with viable kidneys. LEVEL OF EVIDENCE: Level 5.

Custom-Made Implant Fabrication for Chin Augmentation Using Piled-Up Expanded Polytetrafluoroethylene Sheets: An Innovative Surgical Technique and Literature Review.

BACKGROUND: Alloplastic chin augmentation is the most common esthetic surgical treatment to reshape the chin. However, factory-made chin implants are typically standardized rather than custom-made and have potential to cause complications. Although the fabrication of custom-made implants by using computer-assisted planning and 3D-printing technology has become widespread, the process has several disadvantages, including long preoperative prosthesis preparation times, high costs, and unsuitability for patients with asymmetric chins or those who undergo combined mandibuloplasty before implant placement. The present study developed an innovative chin augmentation technique involving stacked expanded polytetrafluoroethylene (e-PTFE) sheets that is suitable for most patients and has minimal side effects. MATERIALS AND METHODS: A retrospective review of a single surgeon's experience was performed over a 2 year period for patients who underwent a procedure involving piled-up e-PTFE sheets for alloplastic chin augmentation. This study analyzed the outcomes, complications (temporary nerve numbness, wound infection, hematoma formation, and implant displacement), and patient satisfaction during follow-up. RESULTS: Between January 2018 and December 2020, 38 patients underwent the procedure involving piled-up e-PTFE sheets for alloplastic chin augmentation. Six patients (15.8%) experienced nerve-related temporary numbness, and one (2.6%) experienced wound infection. None had developed major complications such as implant displacement or wound infection at follow-up. Moreover, the patients demonstrated a high level of satisfaction with the surgical results. CONCLUSION: Piled-up e-PTFE sheets can be used to produce custom-fit porous polyethylene chin implants that result in minimal complications and a very high satisfaction rate. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Direct Defluorination and Amination of Polytetrafluoroethylene and Other Fluoropolymers by Lithium Alkylamides.

Polytetrafluoroethylene (PTFE) and, by extension, fluoropolymers are ubiquitous in science, life, and the environment as perfluoroalkyl pollutants (PFAS). In all cases, it is difficult to transform these materials due to their chemical inertness. Herein, we report a direct amination process of PTFE and some fluoropolymers such as polyvinylidene fluoride (PVDF) and Nafion by lithium alkylamide salts. Synthesizing these reactants extemporaneously between lithium metal and an aliphatic primary di- or triamine that also serves as a solvent leads to the rapid nucleophilic substitution of fluoride by an alkylamide moiety when in contact with the fluoropolymer. Moreover, lithium alkylamides dissolved in suitable solvents other than amines can react with fluoropolymers. This highly efficient one-pot process opens the way for further surface or bulk modification if needed, providing an easy, inexpensive, and fast experiment protocol on large scales.

Rapidly Constructing Sodium Fluoride-Rich Interface by Pressure and Diglyme-Induced Defluorination Reaction for Stable Sodium Metal Anode.

Sodium (Na) metal is able to directly use as a battery anode but have a highly reductive ability of unavoidably occurring side reactions with organic electrolytes, resulting in interfacial instability as a primary factor in performance decay. Therefore, building stable Na metal anode is of utmost significance for both identifying the electrochemical performance of laboratory half-cells employed for quantifying samples and securing the success of room-temperature Na metal batteries. In this work, we propose an NaF-rich interface rapidly prepared by pressure and diglyme-induced defluorination reaction for stable Na metal anode. Once the electrolyte is dropped into the coin-type cells followed by a slight squeeze, the Na metal surface immediately forms a protective layer consisting of amorphous carbon and NaF, effectively inhibiting the dendrite growth and dead Na. The resultant Na metal anode exhibits a long-term cycling lifespan over 1800 h even under the area capacity of 3.0 mAh cm-2 . Furthermore, such a universal and facile method is readily applied in daily battery assembly regarding Na metal anode.

Membrane barriers for guided bone regeneration: An overview of available biomaterials.

Dental implants revolutionized the treatment options for restoring form, function, and esthetics when one or more teeth are missing. At sites of insufficient bone, guided bone regeneration (GBR) is performed either prior to or in conjunction with implant placement to achieve a three-dimensional prosthetic-driven implant position. To date, GBR is well documented, widely used, and constitutes a predictable and successful approach for lateral and vertical bone augmentation of atrophic ridges. Evidence suggests that the use of barrier membranes maintains the major biological principles of GBR. Since the material used to construct barrier membranes ultimately dictates its characteristics and its ability to maintain the biological principles of GBR, several materials have been used over time. This review, summarizes the evolution of barrier membranes, focusing on the characteristics, advantages, and disadvantages of available occlusive barrier membranes and presents results of updated meta-analyses focusing on the effects of these membranes on the overall outcome.

Enhancing Thermal Conductivity of hBN/SiC/PTFE Composites with Low Dielectric Properties via Pulse Vibration Molding.

In order to enhance the thermal conductivity of polytetrafluoroethylene (PTFE)-based composites, while maintaining relatively low dielectric constant and dielectric loss for high-frequency and high-speed applications, hexagonal boron nitride (hBN) and silicon carbide (SiC) compounded fillers are filled into the PTFE matrix. The hBN/SiC/PTFE composites are prepared by pulse vibration molding (PVM), and their subsequent thermal conductivities are comparatively investigated. The PVM process with controlled fluctuation in pressure (1 Hz square wave force, 0-20 MPa, at 150 °C) can reduce the sample porosity and surface defects, improve the orientation of hBN, and increase the thermal conductivity by 44.6% compared with that obtained by compression molding. When hBN:SiC (vol) is 3:1, the in-plane thermal conductivity of the composite with 40 vol% filler content is ≈4.83 W m-1  K-1 , which is 40.3% higher than that of hBN/PTFE. Regarding the dielectric properties, hBN/SiC/PTFE maintains a low dielectric constant of 3.27 and a low dielectric loss of 0.0058. The dielectric constants of hBN/SiC/PTFE ternary composites are predicted by using different prediction models, among which the effective medium theory (EMT), is in good agreement with the experimental results. PVM shows great potential in the large-scale preparation of thermal conductive composites for high-frequency and high-speed applications.

Biofilm formation under food-relevant conditions and sanitizers' tolerance of a Pseudomonas fluorescens group strain.

AIMS: The aim of this study was to determine the biofilm-forming ability of a strain belonging to the Pseudomonas fluorescens group isolated from the dairy environment under food-relevant conditions. Moreover, the effects of commercial sanitizers against preformed biofilms were assessed both in terms of viability and structure. METHODS AND RESULTS: The biofilms were formed on polystyrene, stainless steel (SS), and polytetrafluoroethylene (PTFE) in a wide range of temperatures (4-25°C) and were subjected to the action of 10 different sanitizers. The strain under study showed to be a strong biofilm-former regardless of temperature, particularly on polystyrene. The biofilms were mostly sensitive to chlorine and peracetic acid-based sanitizers. For some sanitizers (e.g. amphoteric), a relationship was observed between the material and the tolerance, while the temperature was not statistically significant. The formation of long-term biofilms on SS was also structurally affected by the temperature, showing microcolonies more irregular in shape and with lower cellularity at 4°C compared to 15°C, where the biofilm was more compact and with a high presence of EPS. CONCLUSIONS: The strain belonging to the P. fluorescens group was shown to quickly adhere and form mature biofilm at temperatures and on materials relevant to the food sector; however, biofilms formed under different conditions were differently tolerant to disinfectants. SIGNIFICANCE AND IMPACT OF THE STUDY: Findings from this study could provide a basis for developing targeted sanitation protocols in food plants.

Aptamer-functionalized stir bar sorptive extraction for selective isolation, identification, and determination of concanavalin A in food by MALDI-TOF-MS.

An aptamer-functionalized stir bar sorptive extraction (SBSE) coating is described for the first time devoted to selective isolation and preconcentration of an allergenic food protein, concavanalin A (Con A), followed by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF-MS) determination. For this purpose, the polytetrafluoroethylene surface of commercial magnetic stir bars was properly modified and vinylized to immobilize a thiol-modified aptamer against Con A via straightforward "thiol-ene" click chemistry. The aptamer-functionalized stir bar was employed as SBSE sorbent to isolate Con A, and several parameters that can affect the extraction efficiency were investigated. Under the optimized conditions, Con A was extracted and desorbed during 30 and 45 min, respectively, at 25 °C and 600 rpm. The SBSE MALDI-TOF-MS method provided limits of detection of 0.5 µg mL-1 for Con A. Furthermore, the SBSE coating was highly selective to Con A compared to other lectins. The developed method was successfully applied to the determination of low levels of Con A in several food matrices (i.e., white beans as well as chickpea, lentils, and wheat flours). Recoveries ranged from 81 to 97% with relative standard deviations below 7%. The aptamer-based stir bars presented suitable physical and chemical long-term stability (1 month) and a reusability of 10 and 5 extraction cycles with standards and food extracts, respectively. The developed aptamer-affinity extraction devices open up the possibility of developing novel highly selective SBSE coatings for the extraction of proteins and peptides from complex samples.

Safety Assessment of Polyfluorinated Polymers as Used in Cosmetics.

The Expert Panel for Cosmetic Ingredient Safety (Panel) reviewed the safety of 12 polyfluorinated polymers in cosmetic products; most of these ingredients have the reported function of film former in common. However, PTFE, the only ingredient that is reported as currently used in cosmetics, functions as a bulking agent and slip modifier, but not as a film former. The Panel reviewed data relevant to the safety of these ingredients under the intended conditions of use in cosmetic formulations, and concluded that PTFE and Hexafluoropropylene/Tetrafluoroethylene Copolymer are safe in cosmetics in the present practices of use and concentration described in the safety assessment; the data are insufficient to determine the safety of the 4 fluorinated-side-chain polymers and 6 fluorinated polyethers.

A Novel Packaging of the MEMS Gas Sensors Used for Harsh Outdoor and Human Exhale Sampling Applications.

Dust or condensed water present in harsh outdoor or high-humidity human breath samples are one of the key sources that cause false detection in Micro Electro-Mechanical System (MEMS) gas sensors. This paper proposes a novel packaging mechanism for MEMS gas sensors that utilizes a self-anchoring mechanism to embed a hydrophobic polytetrafluoroethylene (PTFE) filter into the upper cover of the gas sensor packaging. This approach is distinct from the current method of external pasting. The proposed packaging mechanism is successfully demonstrated in this study. The test results indicate that the innovative packaging with the PTFE filter reduced the average response value of the sensor to the humidity range of 75~95% RH by 60.6% compared to the packaging without the PTFE filter. Additionally, the packaging passed the High-Accelerated Temperature and Humidity Stress (HAST) reliability test. With a similar sensing mechanism, the proposed packaging embedded with a PTFE filter can be further employed for the application of exhalation-related, such as coronavirus disease 2019 (COVID-19), breath screening.

Streptococcus salivarius as an Important Factor in Dental Biofilm Homeostasis: Influence on Streptococcus mutans and Aggregatibacter actinomycetemcomitans in Mixed Biofilm.

A disturbed balance within the dental biofilm can result in the dominance of cariogenic and periodontopathogenic species and disease development. Due to the failure of pharmacological treatment of biofilm infection, a preventive approach to promoting healthy oral microbiota is necessary. This study analyzed the influence of Streptococcus salivarius K12 on the development of a multispecies biofilm composed of Streptococcus mutans, S. oralis and Aggregatibacter actinomycetemcomitans. Four different materials were used: hydroxyapatite, dentin and two dense polytetrafluoroethylene (d-PTFE) membranes. Total bacteria, individual species and their proportions in the mixed biofilm were quantified. A qualitative analysis of the mixed biofilm was performed using scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The results showed that in the presence of S. salivarius K 12 in the initial stage of biofilm development, the proportion of S. mutans was reduced, which resulted in the inhibition of microcolony development and the complex three-dimensional structure of the biofilm. In the mature biofilm, a significantly lower proportion of the periodontopathogenic species A. actinomycetemcomitans was found in the salivarius biofilm. Our results show that S. salivarius K 12 can inhibit the growth of pathogens in the dental biofilm and help maintain the physiological balance in the oral microbiome.

Treatment of superior mesenteric artery mycotic aneurysm by synthetic vascular graft: A case report.

Superior mesenteric artery (SMA) aneurysm is a rare disease, especially if it is mycotic (infective) in origin. It is difficult to detect the problem during its initial natural course and usually presents in late phase due to its complications such as rupture, dissection, haemorrhage, and mesenteric ischaemia. Initially, the patient present with non-specific symptoms like vague colicky abdominal pain, nausea, vomiting, discomfort, malaise, and low-grade fever but prompt workup and intervention can lead to definitive diagnosis and uneventful outcome. This report describes the case of a 60-year-old male patient who presented with non-specific abdominal symptoms and, on workup, was diagnosed with superior mesenteric artery mycotic aneurysm. It was successfully treated surgically by resection of aneurysm and reconstruction of superior mesenteric artery by inter-positional Polytetrafluoroethylene (PTFE) synthetic vascular graft.

Mixture Phases Engineering of PtFe Nanofoams for Efficient Hydrogen Evolution.

Phase engineering is a promising but challenging approach to construct PtFe-based catalysts with efficient hydrogen evolution reaction (HER) performance. Herein, the authors successfully synthesize PtFe nanofoams with face center cubic (fcc) phase, with simple cubic crystalline (scc) phase and with the mixture phases of fcc and scc phases (PtFe-mix) by hydrogen-assisted calcination for the first time. By benchmarking the HER activity, PtFe-mix exhibits excellent activity in 1.0 m KOH, requiring an overpotential of 28 mV to achieve 10 mA cm-2 , which is better than the commercial Pt/C (34 mV). PtFe-mix also possesses remarkable stability up to 24 h. Density functional theory calculations further verify that PtFe-mix shows a more suitable d-band center and lower energy barrier for the initial water dissociation, facilitating the HER process. This work provides a meaningful strategy to design PtFe-based catalysts with efficient activity for hydrogen evolution.

Disposition of Fluorine on New Firefighter Turnout Gear.

Firefighter turnout gear is essential for reducing occupational exposure to hazardous chemicals during training and fire events. Per-and polyfluoroalkyl substances (PFASs) are observed in firefighter serum, and possible occupational sources include the air and dust of fires, aqueous film-forming foam, and turnout gear. Limited data exist for nonvolatile and volatile PFASs on firefighter turnout gear and the disposition of fluorine on the individual layers of turnout gear. Further implications for exposure to fluorine on turnout gear are not well understood. Three unused turnout garments purchased in 2019 and one purchased in 2008, were analyzed for 50 nonvolatile and 15 volatile PFASs by liquid chromatography quadrupole time-of-flight mass spectrometry (LC-qTOF-MS) and gas chromatography-mass spectrometry (GC-MS), respectively. Particle-induced gamma ray emission (PIGE), a surface technique, and instrumental neutron activation analysis (INAA), a bulk technique, were used to measure total fluorine. Bulk characterization of the layers by pyrolysis-GC/MS (py-GC/MS) was used to differentiate fluoropolymer (e.g., PTFE) films from textile layers finished with side-chain polymers. The outer layer, moisture barrier, and thermal layers of the turnout gear all yielded measured concentrations of volatile PFASs that exceeded nonvolatile PFAS concentrations, but the summed molar concentrations made up only a small fraction of total fluorine (0.0016-6.7%). Moisture barrier layers comprised a PTFE film, as determined by py-GC-MS, and gave the highest individual nonvolatile (0.159 mg F/kg) and volatile PFAS (20.7 mg F/kg) as well as total fluorine (122,000 mg F/kg) concentrations. Outer and thermal layers comprised aromatic polyamide-based fibers (aramid) treated with side-chain fluoropolymers and had lower levels of individual nonvolatile and volatile PFASs. Equal concentrations of total fluorine by both PIGE and INAA on the outer and thermal layers is consistent with treatment with a side-chain fluoropolymer coating. New turnout gear should be examined as a potential source of firefighter occupational exposure to nonvolatile and volatile PFASs in future assessments.