Pd/C Catalyzed Selective N-monomethylation by Transfer Hydrogenation of Urea derivatives using Methanol as H2 and C1 Sources.

N-monomethyl amines are useful intermediates in drugs, natural products, paints. Yet their synthesis is a tremendous challenge due to their high reactivity, typically leading to overmethylation. In this contribution, a highly selective catalytic N-methylation methodology is reported, converting urea derivatives to monomethylated amines, using a commercially available heterogeneous Pd/C catalyst and methanol as unique reagent. Methanol provides a sustainable alternative protocol for the selective preparation of mono-methylated derivatives as it acts as both H2 and C1 sources. In addition, several control experiments were performed to provide a proposal for the mechanism, namely dehydrogenation of methanol and subsequent hydrogenation of urea derivatives, followed by reduction of the in situ formed methyl imine. Importantly, the approach is simple, highly productive and enables novel synthetic procedures for the preparation of monomethylamines from urea derivatives.

A Novel Utilization of Water Extract of Suaeda Salsa in the Pd/C Catalyzed Suzuki-Miyaura Coupling Reaction.

Using biomass-derived solvents in various organic reactions is challenging for the fine chemicals industry. We herein report a Pd/C catalyzed Suzuki-Miyaura reaction in water extract of suaeda salsa (WES) without using external phosphine ligand, base, and organic solvent. The cross-coupling reactions were carried out in a basic WES medium with a broad substrate scope and wide functional group tolerance. Furthermore, the high purity of solid biaryl products can be obtained by column chromatography or filtration.

Preparation of 1-Hydroxy-2,5-hexanedione from HMF by the Combination of Commercial Pd/C and Acetic Acid.

The development of a simple and durable catalytic system for the production of chemicals from a high concentration of a substrate is important for biomass conversion. In this manuscript, 5-hydroxymethylfurfural (HMF) was converted to 1-hydroxy-2,5-hexanedione (HHD) using the combination of commercial Pd/C and acetic acid (AcOH) in water. The influence of temperature, H2 pressure, reaction time, catalyst amount and the concentration of AcOH and HMF on this transformation was investigated. A 68% yield of HHD was able to be obtained from HMF at a 13.6 wt% aqueous solution with a 98% conversion of HMF. The resinification of intermediates on the catalyst was characterized to be the main reason for the deactivation of Pd/C. The reusability of the used Pd/C was studied to find that most of the activity could be recovered by being washed in hot tetrahydrofuran.

Synthesis and in vitro anti-proliferative effects of 3-(hetero)aryl substituted 3-[(prop-2-ynyloxy)(thiophen-2-yl)methyl]pyridine derivatives on various cancer cell lines.

A series of 3-(hetero)aryl substituted 3-[(prop-2-ynyloxy)(thiophen-2-yl)methyl]pyridine derivatives were designed as potential anticancer agents. These compounds were conveniently prepared by using Pd/C-Cu mediated Sonogashira type coupling as a key step. Many of these compounds were found to be promising when tested for their in vitro anti-proliferative properties against six cancer cell lines. All these compounds were found to be selective towards the growth inhibition of cancer cells with IC50 values in the range of 0.9-1.7 µM (against MDA-MB 231 and MCF7 cells), comparable to the known anticancer drug doxorubicin.

Synthesis of 2H-1,3-benzoxazin-4(3H)-one derivatives containing indole moiety: their in vitro evaluation against PDE4B.

A number of 2H-1,3-benzoxazin-4(3H)-one derivatives containing indole or benzofuran moieties were synthesized by using Pd/C-Cu mediated coupling-cyclization strategy as a key step. The o-iodoanilides or o-iodophenol were coupled with 3-{2-(prop-2-ynyloxy)ethyl}-2H-benzo[e][1,3]oxazin-4(3H)-one using 10%Pd/C-CuI-PPh3 as a catalyst system and Et3N as a base to give the target compounds. All the synthesized compounds were tested for their PDE4B inhibitory potential in vitro using a cell based cAMP reporter assay. Some of them showed fold increase of the cAMP level when tested at 30 µM. A representative compound showed encouraging PDE4B inhibitory properties that were supported by its docking results.

Pd/C as a catalyst for completely regioselective C-H functionalization of thiophenes under mild conditions.

The completely C3-selective arylation of thiophenes and benzo[b]thiophenes was achieved by using Pd/C as a heterogeneous catalyst without ligands or additives under mild reaction conditions. The practicability of this transformation is demonstrated by notable functional group tolerance and the insensitivity of the reaction to H2 O and air. This method is also applicable to nitrogen- and oxygen-containing heterocycles, yielding the corresponding C2-arylated products. Three-phase tests along with Hg-poisoning and hot-filtration tests suggest that the catalytically active species is heterogeneous in nature.

Synthesis of Pd/Carbon Hollow Spheres by the Microwave Discharge Method for Catalytic Debenzylation.

Pd/C catalysts have been widely applied in the debenzylation process due to their excellent ability of hydrogenolysis. However, they have been suffering from the problems of agglomeration and loss of active components, which lead to decreased and unstable activity. Thus, it is still a challenge to achieve Pd/C catalysts with high activity and stability. Herein, we propose a strategy for preparing Pd/C catalysts on porous carbon hollow spheres by a microwave discharge method. Due to the high-temperature property and reducibility of microwave discharge, Pd precursors can be rapidly reduced, resulting in well-dispersed Pd nanoparticles with a small size on the carbon carrier. Besides, the matched mesopores in the carbon hollow spheres can anchor Pd nanoparticles and effectively reduce the agglomeration and loss of Pd nanoparticles during the catalytic reaction. As a result, the as-prepared Pd/mesoporous carbon hollow spheres exhibit high and stable activity in the debenzylation reaction.

Ethnobotany, phytochemistry, pharmacology and quality control of Peucedanum decursivum (Miq.) Maxim: A critical review.

ETHNOPHARMACOLOGICAL RELEVANCE: Dried roots of Peucedanum decursivum, a traditional Chinese medicine (TCM), has historically respiratory diseases such as cough, thick phlegm, headache, fever, and gynecological diseases, rheumatoid arthritis, and nasopharyngeal carcinoma. AIM OF THE STUDY: Made an endeavor to evaluate the research trajectory of P. decursivum, comprehensively discern its developmental status, and offer a guideline for future investigations. MATERIALS AND METHODS: A meticulous search of literatures and books from 1955 to 2024 via databases like PubMed, Web of Science and CNKI was conducted, including topics and keywords of " P. decursivum" "Angelica decursivum" and "Zihua Qianhu". RESULTS: P. decursivum and its prescriptions have traditionally been used for treating phlegm-heat cough, wind-heat cough, gastrointestinal diseases, pain relief and so on. It contains 234 identified compounds, encompassing coumarins, terpenes, volatile oils, phenolic acids, fatty acids and derivatives. It exhibits diverse pharmacological activities, including anti-asthmatic, anti-inflammatory, antioxidant effects, anti-hypertensive, anti-diabetic, anti-Alzheimer, and anti-cancer properties, primarily attributed to coumarins. Microscopic identification, HPLC fingerprinting, and bioinformatics identification are the primary methods currently used for the quality control. CONCLUSION: P. decursivum demonstrates anti-asthmatic, anti-inflammatory, and antioxidant effects, aligning with its traditional use. However, experimental validation of its efficacy against phlegm and viruses is needed. Additionally, analgesic effects mentioned in historical texts lack modern pharmacological studies. Numerous isolated compounds exhibit highly valuable medicinal properties. Future research can delve into exploring these substances further. Rigorous of heavy metal contamination, particularly Cd and Pb, is necessary. Simultaneously, investigating its pharmacokinetics and toxicity in humans is crucial for the safety.

Design, synthesis, and biological activities of novel hexahydropyrazino[1,2-a]indole derivatives as potent inhibitors of apoptosis (IAP) proteins antagonists with improved membrane permeability across MDR1 expressing cells.

We previously reported octahydropyrrolo[1,2-a]pyrazine derivative 2 (T-3256336) as a potent antagonist for inhibitors of apoptosis (IAP) proteins. Because compound 2 was susceptible to MDR1 mediated efflux, we developed another scaffold, hexahydropyrazino[1,2-a]indole, using structure-based drug design. The fused benzene ring of this scaffold was aimed at increasing the lipophilicity and decreasing the basicity of the scaffold to improve the membrane permeability across MDR1 expressing cells. We established a chiral pool synthetic route to yield the desired tricyclic chiral isomers. Chemical modification of the core scaffold led to a representative compound 50, which showed strong inhibition of IAP binding (X chromosome-linked IAP [XIAP]: IC50 23 nM and cellular IAP [cIAP]: IC50 1.1 nM) and cell growth inhibition (MDA-MB-231 cells: GI50 2.8 nM) with high permeability and low potential of MDR1 substrate.

The 3,7-diazabicyclo[3.3.1]nonane scaffold for subtype selective nicotinic acetylcholine receptor ligands. Part 2: carboxamide derivatives with different spacer motifs.

3,7-Diazabicyclo[3.3.1]nonane (bispidine) based nicotinic acetylcholine receptor (nAChR) ligands have been synthesized and evaluated for nAChRs interaction. Diverse spacer motifs were incorporated between the hydrogen bond acceptor (HBA) part and a variety of substituted (hetero)aryl moieties. Bispidine carboxamides bearing spacer motifs often showed high affinity in the low nanomolar range and selectivity for the α4ß2(∗) nAChR. Compounds 15, 25, and 47 with Ki values of about 1 nM displayed the highest affinities for α4ß2(∗) nAChR. All evaluated compounds are partial agonists or antagonists at α4ß2(∗), with reduced or no effects on α3ß4(∗) with the exception of compound 15 (agonist), and reduced or no effect at α7 and muscle subtypes.

The 3,7-diazabicyclo[3.3.1]nonane scaffold for subtype selective nicotinic acetylcholine receptor (nAChR) ligands. Part 1: the influence of different hydrogen bond acceptor systems on alkyl and (hetero)aryl substituents.

3,7-Diazabicyclo[3.3.1]nonane is a naturally occurring scaffold interacting with nicotinic acetylcholine receptors (nAChRs). When one nitrogen of the 3,7-diazabicyclo[3.3.1]nonane scaffold was implemented in a carboxamide motif displaying a hydrogen bond acceptor (HBA) functionality, compounds with higher affinities and subtype selectivity for α4ß2(∗) were obtained. The nature of the HBA system (carboxamide, sulfonamide, urea) had a strong impact on nAChR interaction. High affinity ligands for α4ß2(∗) possessed small alkyl chains, small un-substituted hetero-aryl groups or para-substituted phenyl ring systems along with a carboxamide group. Electrophysiological responses of selected 3,7-diazabicyclo[3.3.1]nonane derivatives to Xenopus oocytes expressing various nAChR subtypes showed diverse activation profiles. Compounds with strongest agonistic profiles were obtained with small alkyl groups whereas a shift to partial agonism/antagonism was observed for aryl substituents.

Removal of benzylidene acetal and benzyl ether in carbohydrate derivatives using triethylsilane and Pd/C.

Clean deprotection of carbohydrate derivatives containing benzylidene acetals and benzyl ethers was achieved under catalytic transfer hydrogenation conditions by using a combination of triethylsilane and 10% Pd/C in CH(3)OH at room temperature. A variety of carbohydrate diol derivatives were prepared from their benzylidene derivatives in excellent yield.

Enhancing Photocatalytic-Transfer Semi-Hydrogenation of Alkynes Over Pd/C3 N4 Through Dual Regulation of Nitrogen Defects and the Mott-Schottky Effect.

The selective hydrogenation of alkynes is an important reaction; however, the catalytic activity and selectivity in this reaction are generally conflicting. In this study, ultrafine Pd nanoparticles (NPs) loaded on a graphite-like C3 N4 structure with nitrogen defects (Pd/DCN) are synthesized. The resulting Pd/DCN exhibits excellent photocatalytic performance in the transfer hydrogenation of alkynes with ammonia borane. The reaction rate and selectivity of Pd/DCN are superior to those of Pd/BCN (bulk C3 N4 without nitrogen defects) under visible-light irradiation. The characterization results and density functional theory calculations show that the Mott-Schottky effect in Pd/DCN can change the electronic density of the Pd NPs, and thus enhances the hydrogenation selectivity toward phenylacetylene. After 1 h, the hydrogenation selectivity of Pd/DCN reaches 95%, surpassing that of Pd/BCN (83%). Meanwhile, nitrogen defects in the supports improve the visible-light response and accelerate the transfer and separation of photogenerated charges to enhance the catalytic activity of Pd/DCN. Therefore, Pd/DCN exhibits higher efficiency under visible light, with a turnover frequency (TOF) of 2002 min-1 . This TOF is five times that of Pd/DCN under dark conditions and 1.5 times that of Pd/BCN. This study provides new insights into the rational design of high-performance photocatalytic transfer hydrogenation catalysts.

Dataset on the reductive amination of phenolics with cyclohexylamine over Rh/C and Pd/C: Catalysts characterization and reaction performance.

Secondary amines play a very important role in today's chemical industry owing to their extensive applications in agricultural, pharmaceutical, textile, polymer and in personal care fields [1] Unfortunately, most of the amine synthesis processes at the industrial level are fossil-based and imply economic and environmental problems. However, the heterogeneously catalyzed reductive amination of lignin-derived phenolics has been recognized as an efficient and ecofriendly method for the synthesis of primary or higher order amines [2]. In this sense, metal-supported catalysts, specifically palladium, and rhodium-based materials, have demonstrated their effectivity to produce secondary amines [3,4]. Therefore, there is a crescent interest in evaluating their roles within the reaction mechanisms by testing different reaction conditions and phenolics sources. Nevertheless, there is a lack of experimental data allowing to establish a correlation between the nature of the metallic clusters, the operational parameters, and steric effects of alkyl-phenolics with the activity and selectivity to amines. Accordingly, this dataset includes reliable experimental measurements on the use of Pd/C and Rh/C as catalysts for the reductive amination of phenols (RAPhs). A complete set of characterization techniques was applied to inspect the structural and textural properties of these materials which will allow its further correlation with the reaction performance. Therefore, data regarding transmission electron microscopy (TEM), High-resolution transmission electron microscopy (HR-TEM), scanning electron microscopy (SEM) with energy dispersive X-Ray analysis (EDX), X-ray diffraction (XRD) and specific surface area (BET) with pore size distribution (BJH) are provided here. Furtheremore, experimental data on the catalytic activity (in batch and/or dynamic modes) under different reaction conditions (phenol concentration, amine concentration, hydrogen pressure, temperature and alkyl-substituted phenols) are also included in the dataset. The data provided here could support the understanding on the role of active sites nature (Pd or Rh), the effect of operational parameters and the reactivity order for substituted phenols on the aforementioned reaction. Finally, we have included a sample datasheet which could aid the reader to perform preliminary kinetic analysis using the provided dataset.

Combination of Soxhlet extraction and catalytic hydrodebromination for remediation of tetrabromobisphenol A contaminated soil.

As a widely used brominated flame retardants (BFRs), tetrabromobisphenol A (TBBPA) has been detected in various environmental matrices and is known to cause negative effects on both the environment and human health. In this study, a combined method was developed for the abatement of TBBPA contaminated soil based on successive steps of solvent extraction (SE) and catalytic hydrodebromination (HDB) over Pd/C. The results showed that TBBPA could be efficiently extracted from the TBBPA contaminated soil with polar solvents. Subsequently, TBBPA could be completely hydrodebrominated over Pd/C in ethanol, via multistep ultimately yielding bisphenol A. Moreover, NaOH, NH3H2O, and Et3N were more favorable to promote the HDB of 4-TBBPA over Pd/C, and 100% bromide atom removal ratio of TBBPA was achieved within 40 min when [NaOH]0/[organic-Br]0 was more than 1.10 in ethanol. However, the catalytic activity of Pd/C decreased with the repeated use in ethanol. To study the mechanism for this phenomenon, fresh and used catalysts were analyzed by characterization techniques including scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectrometer (EDS). It was found that the deactivation of Pd/C catalyst caused by the gradual accumulation of NaBr could be recovered by washing with water. On the basis of these studies, an effective and practical system for the combined method of SE and catalytic HDB over Pd/C was developed to dispose BFRs contaminated soils.

A New Sustainable Multistep Catalytic Process from Benzene to Caprolactam: Amination, Hydroximation and Beckmann Rearrangement Promoted and Catalyzed by Trifluoroacetic Acid.

Here we report some results on a 3 steps benzene caprolactam process via amination, aniline Hydroxymation and Beckmann rearrangement. The amination proceeds with hydroxylamine trifluoroacetate, with 97% of conversion and selectivity of 90%, catalyzed by V compounds. We achieve 98% of conversion and 95% of selectivity in the hydroxymation of aniline in the presence of hydroxylamine trifluoroacetate, sulfonic resin and Pd/C. While in the absence of the resin, hydrogenation of hydroxylamine trifluoroacetate occurs readily to the ammonium salt. The reaction occurs likely by the exchanged hydroxylamine and the aniline reduction intermediate. The use of hydroxylamine trifluoroacetate, instead of the chloride, favors the sustainability of the process by avoiding the ammonium chloride formation. The absence of salt except those derived from the trifluoroacetic acid allows a complete reuse of the trifluoroacetic acid and the only byproduct is ammonium nitrate obtained by resin regeneration. Beckmann rearrangement of the so produced cyclohexanone oxime occurs easily after diethyl ether evaporation and additions of a solution trifluoroacetic acid acetonitrile in high yield and selectivity. Graphical Abstract: New three steps caprolactam process via benzene amination and aniline hydrogenation. Supplementary Information: The online version contains supplementary material available at 10.1007/s10562-022-04207-9.

Heterogeneous Pd/C-catalyzed, ligand free Suzuki-Miyaura coupling reaction furnishes new p-terphenyl derivatives.

A series of new para-terphenyls derivatives have been efficiently synthesized by a ligand-free heterogeneous Pd/C-catalyzed two-fold Suzuki-Miyaura coupling reaction. Methyl 5-bromo-2-iodobenzoate was selected to react with a variety of different aryl boronic acids (2a-i). Nine new p-terphenyl derivatives (3a-i) were prepared and the structures were confirmed by several analytical techniques including infrared, spectroscopy, 1H and 13C NMR spectroscopy, mass spectrometry, and in the case of compound 3 b, by X-ray diffraction method. The new derivatives were obtained in very good yields (78-91%). This synthetic facile route is envisioned to improve the preparation of p-terphenyl-based natural products.

Pd-C Catalytic Thin Films Prepared by Magnetron Sputtering for the Decomposition of Formic Acid.

Formic acid is an advantageous liquid organic hydrogen carrier. It is relatively nontoxic and can be synthesized by the reaction of CO2 with sustainable hydrogen or by biomass decomposition. As an alternative to more widely studied powdery catalysts, supported Pd-C catalytic thin films with controlled nanostructure and compositions were newly prepared in this work by magnetron sputtering on structured supports and tested for the formic acid decomposition reaction. A two-magnetron configuration (carbon and tailored Pd-C targets) was used to achieve a reduction in Pd consumption and high catalyst surface roughness and dispersion by increasing the carbon content. Activity and durability tests were carried out for the gas phase formic acid decomposition reaction on SiC foam monoliths coated with the Pd-C films and the effects of column width, surface roughness and thermal pre-reduction time were investigated. Activity of 5.04 molH2·gPd-1·h-1 and 92% selectivity to the dehydrogenation reaction were achieved at 300 °C for the catalyst with a lower column width and higher carbon content and surface roughness. It was also found that deactivation occurs when Pd is sintered due to the elimination of carbon and/or the segregation and agglomeration of Pd upon cycling. Magnetron sputtering deposition appears as a promising and scalable route for the one-step preparation of Pd-C catalytic films by overcoming the different deposition characteristics of Pd and C with an appropriate experimental design.

Deconstruction of biomass into lignin oil and platform chemicals over heteropoly acids with carbon-supported palladium as a hybrid catalyst under mild conditions.

In this work, near-complete conversion of lignocellulosic biomass and high products yields were achieved through catalytic transfer hydrogenolysis (CTH) in isopropanol using a heteropoly acid SiW12 synergistic with Pd/C catalyst at a relatively mild condition. The performances of various heteropoly acids and catalytic conditions were extensively examined. The results confirmed that SiW12 exhibited the highest activity on disrupting C-C linkages and C-O linkages than H2WO4, PW12, and PMo12. 34.91 wt% and 43.55 wt% monophenols were achieved for hydrogenolysis of bagasse and eucalyptus, respectively, at their optimal temperature for 5 h. Characterization studies on the lignin oil revealed that the notable structural changes were observed including the breaking of the side chain alkyl-aryl ether bonds and glycosidic bonds, while methoxyl groups were retained. Additionally, particle size of feedstock also has significant impact on the distribution and yields of the monophenols.

First-Principles Insight into Pd-Doped C3N Monolayer as a Promising Scavenger for NO, NO2 and SO2.

The adsorption and sensing behavior of three typical industrial toxic gases NO, NO2 and SO2 by the Pd modified C3N monolayer were studied in this work on the basic first principles theory. Meanwhile, the feasibility of using the Pd doped C3N monolayer (Pd-C3N) as a sensor and adsorbent for industrial toxic gases was discussed. First, the binding energies of two doping systems were compared when Pd was doped in the N-vacancy and C-vacancy sites of C3N to choose the more stable doping structure. The result shows that the doping system is more stable when Pd is doped in the N-vacancy site. Then, on the basis of the more stable doping model, the adsorption process of NO, NO2 and SO2 by the Pd-C3N monolayer was simulated. Observing the three gases adsorption systems, it can be found that the gas molecules are all deformed, the adsorption energy (Ead) and charge transfer (QT) of three adsorption systems are relatively large, especially in the NO2 adsorption system. This result suggests that the adsorption of the three gases on Pd-C3N belongs to chemisorption. The above conclusions can be further confirmed by subsequent deformable charge density (DCD) and density of state (DOS) analysis. Besides, through analyzing the band structure, the change in electrical conductivity of Pd-C3N after gas adsorption was studied, and the sensing mechanism of the resistive Pd-C3N toxic gas sensor was obtained. The favorable adsorption properties and sensing mechanism indicate that the toxic gas sensor and adsorbent prepared by Pd-C3N have great application potential. Our work may provide some guidance for the application of a new resistive sensor and gas adsorbent Pd-C3N in the field of toxic gas monitoring and adsorption.