Synchronous removal of emulsions and organic dye over palladium nanoparticles anchored cellulose-based membrane.

Membrane is a considerable precursor for emulsions separation and organic dyes degradation used in water purification and oil reclamation. However, the tedious preparation method, the surface smears easily, and low degradation efficiency, these characteristics usually significantly hinder its applicability toward wastewater governance. Herein, a green, facile, and efficient fabrication strategy to prepare a bi-functional palladium nanoparticles (PdNPs)-loaded bacterial cellulose membrane (BCMPd) is proposed. A tri-functional bacterial cellulose membrane (BCM) was obtained by percolating bacterial cellulose (BC) on a basal membrane, and BCM served as a support, reducing agent, and stabilizer in the subsequent reduction of PdNPs. Bi-functional BCMPd was successfully obtained and used for continuously removing emulsions and reducing methylene blue (MB) from simulated wastewater via the integration of physical sieving and chemical reaction. Meanwhile, the enhancement factors for the water transfer ability and demulsification capacity correlated directly with the wettability and surface structure of BCMPd. Furthermore, the dosage of BC was adjusted to reveal the mechanism for the enhanced water transferability and demulsification capacity. Notably, PdNPs of BCMPd decreased Fermi potential difference between BH4- and MB, accelerating the electron transfer of the reduction reaction and thus exhibiting a remarkable MB degradation efficiency. Together, the information obtained in this work can be useful for comprehensively addressing the bottleneck of forming a cost-effective, eco-friendly, and bi-functional membrane reactor, providing an alternative approach for better treatment of complex wastewater.

A highly sensitive electrochemical sensor for the determination of methanol based on PdNPs@SBA-15-PrEn modified electrode.

In this study, a novel electrochemical sensor for the determination of methanol based on palladium nanoparticles supported on Santa barbara amorphous-15- PrNHEtNH2 (PdNPs@SBA-15-PrEn) as nanocatalysis platform is presented. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and electrochemical methods are employed to characterize the PdNPs@SBA-15-PrEn nanocomposite. The Nafion-Pd@SBA-15-PrEn modified glassy carbon electrode (Nafion-PdNPs@SBA-15-PrEn/GCE) displayed the high electrochemical activity and excellent catalytic characteristic for electro-oxidation of methanol in an alkaline solution. The electro-oxidation performance of the proposed sensor was investigated using cyclic voltammetry (CV) and amperometry. The sensor exhibits a good sensitivity of 0.0905 Amol-1 Lcm-2, linear range of 20-1000 µM and the corresponding detection limit of 12 µM (3σ). The results demonstrate that the Nafion-PdNPs@SBA-15-PrEn/GCE has potential as an efficient and integrated sensor for methanol detection.

Electrochemical prostate specific antigen aptasensor based on hemin functionalized graphene-conjugated palladium nanocomposites.

An electrochemical aptasensor is described for the detection of prostate specific antigen (PSA). The aptasensor is based on the use of hemin-functionalized graphene-conjugated palladium nanoparticles (H-Gr/PdNPs) deposited on a glassy carbon electrode. The nanocomposites integrate the high electrical conductivity of graphene with the easily functionalized surface chemistry of PdNPs and their excellent catalytic property. The hemin placed on graphene acts as both a protective agent and an in-situ redox probe. The PdNPs provide numerous binding sites for the immobilization of DNA-biotin via coordinative binding between Pd and amino groups. A sensitive and specific PSA assay was attained by immobilizing the PSA aptamer via biotin-streptavidin interaction. The resulting aptasensor has a linear response that covers the PSA concentration range from 0.025 to 205 ng·mL-1, with a 8 pg·mL-1 lower detection limit (at -0.362 V, scan rate: 0.1 mV·s-1, S/N = 3). The method was applied to the quantitation of PSA in spiked serum samples, giving recoveries ranging from 95.0 to 100.3%. Graphical abstract A signal amplified and approving electrochemical aptasensor was constructed for the determination of prostate specific antigen (PSA) based on the use of hemin-functionalized graphene conjugated to palladium nanoparticles (H-Gr/PdNPs). The sensor has a wide linear range, a relatively low detection limit, satisfying stability and high specificity.

Green synthesis of lignin-directed palladium nanoparticles/UiO-66-NH2 paper-based composite catalyst for synergistic adsorption-catalysis removal of hexavalent chromium.

A combination of multiple methods can greatly intensify the removal efficiency of hazardous substances. Herein, the synergistic utilization of adsorption and catalysis achieved for the highly efficient removal of hexavalent chromium (Cr6+). A paper-based palladium nanoparticles/UiO-66-NH2 (PdNPs/UiO-66-NH2/LP) composite catalyst was prepared using lignocellulose paper-based material (LP) for the loading of UiO-66-NH2 MOFs materials, with the lignin in LP as the reducer for the in-situ synthesis of PdNPs (12.3 nm) on UiO-66-NH2 MOF materials. Lignocellulose paper-based materials with high strength (82 N·m/g) realized low-cost and environmentally friendly preparation and guaranteed the practicability of PdNPs/UiO-66-NH2/LP composite catalyst. The prepared PdNPs/UiO-66-NH2/LP achieved high-efficiency catalytic activity for hazardous Cr6+ removal through a constructed adsorption-catalytic synergistic system, in which the removal efficiency of Cr6+ in 10 min was increased by 2 times compared with a composite catalyst without MOFs loading. Finally, the PdNPs/UiO-66-NH2/LP composite catalyst demonstrated the great efficiency and practicality of water pollution treatment through synergistic adsorption enrichment and catalytic reduction.

Exploiting the Opportunity to Use Plant-Derived Nanoparticles as Delivery Vehicles.

The scientific community has become increasingly interested in plant-derived nanoparticles (PDNPs) over the past ten years. Given that they possess all the benefits of a drug carrier, including non-toxicity, low immunogenicity, and a lipid bilayer that protects its content, PDNPs are a viable model for the design of innovative delivery systems. In this review, a summary of the prerequisites for mammalian extracellular vesicles to serve as delivery vehicles will be given. After that, we will concentrate on providing a thorough overview of the studies investigating the interactions of plant-derived nanoparticles with mammalian systems as well as the loading strategies for encapsulating therapeutic molecules. Finally, the existing challenges in establishing PDNPs as reliable biological delivery systems will be emphasized.

A flexible and wearable paper-based chemiresistive sensor modified with SWCNTs-PdNPs-polystyrene microspheres composite for the sensitive detection of ethylene gas: A new method for the determination of fruit ripeness and corruption.

This study developed a flexible and wearable paper-based chemoresistive sensor (FWPCS) by modifying a SWCNT-PdNP-polystyrene microsphere (SPPM) composite (SPPM/FWPCS) for the low-cost and online determination of fruit ripeness and corruption. A new method for the batch and low-cost fabrication of SPPM/FWPCSs based on laser direct writing was proposed. The sensing mechanism of FWPCS relies on the electron depletion layer in the sensing composite created by the Schottky barriers among SWCNTs, PdNPs, and the adsorbed oxygen, along with the construction of O2-. When the SPPM sensing film is exposed to ethylene, trapped electrons are released into the conduction band through oxidation and cleavage of ethylene, causing a decrease in resistance. The properties and morphology of the synthesized SPPM composite were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Additionally, the key parameters for the fabrication of SPPMs/FWPCS related to the sensing performance were optimized. The concentration of C2H4 can be detected down to 100 ppb using the SPPMs/FWPCS at 25 °C. Finally, the real-time determination of banana ripeness and corruption verified the feasibility of the sensor, indicating that the SPPMs/FWPCS has prospects in monitoring fruit ripeness and corruption during storage and transportation.

Extracellular vesicle-loaded hydrogels for tissue repair and regeneration.

Extracellular vesicles (EVs) are a collective term for nanoscale or microscale vesicles secreted by cells that play important biological roles. Mesenchymal stem cells are a class of cells with the potential for self-healing and multidirectional differentiation. In recent years, numerous studies have shown that EVs, especially those secreted by mesenchymal stem cells, can promote the repair and regeneration of various tissues and, thus, have significant potential in regenerative medicine. However, due to the rapid clearance capacity of the circulatory system, EVs are barely able to act persistently at specific sites for repair of target tissues. Hydrogels have good biocompatibility and loose and porous structural properties that allow them to serve as EV carriers, thereby prolonging the retention in certain specific areas and slowing the release of EVs. When EVs are needed to function at specific sites, the EV-loaded hydrogels can stand as an excellent approach. In this review, we first introduce the sources, roles, and extraction and characterization methods of EVs and describe their current application status. We then review the different types of hydrogels and discuss factors influencing their abilities to carry and release EVs. We summarize several strategies for loading EVs into hydrogels and characterizing EV-loaded hydrogels. Furthermore, we discuss application strategies for EV-loaded hydrogels and review their specific applications in tissue regeneration and repair. This article concludes with a summary of the current state of research on EV-loaded hydrogels and an outlook on future research directions, which we hope will provide promising ideas for researchers.

An efficient biosynthesis of palladium nanoparticles using Bael gum and evaluation of their catalytic and antibacterial activity.

We report a facile microwave-assisted synthesis of palladium nanoparticles (PdNPs) using Bael gum (BG) and it's carboxymethylated (CMBG) derivative. The prepared nanoparticles (BG@PdNPs and CMBG@PdNPs) were evaluated for antibacterial and catalytic activity in the reduction of organic dye pollutants. The developed synthetic method is simple, low cost and eco-friendly, wherein the process requires no additional reducing or capping agents. The CMBG was prepared via etherification reaction between BG and monochloroacetic acid using Williamson synthesis method. The PdNPs were synthesized using BG and CMBG as stabilizers and reducing agents. The PdNPs were found to be well dispersed spherical, with the crystalline size of the order of 7-21 nm. The results showed that the CMBG@PdNPs were smaller in size (7 ± 2 nm) than those capped with BG@PdNPs (10 ± 2 nm). The catalytic ability of CMBG@PdNPs was examined for the reduction of Methyl Orange (MO), Methyl Red(MR), and Rhodamine-B (RhB) in the presence of NaBH4. The results showed that CMBG@PdNPs exhibited a higher catalytic ability than BG@PdNPs. Moreover, it was found that CMBG@PdNPs served several times as a retrievable and reusable catalyst which is stable even after six cycles of reaction. The CMBG@PdNPs and BG@PdNPs showed excellent antibacterial activity. The results indicate that CMBG@PdNPs have greater potential application as a catalyst in the reduction of organic pollutants and antibacterial activity.

The development of alginate-based amperometric nanoreactors for biochemical profiling of living yeast cells.

This study describes the development of a one-pot electrochemical miniaturized system for simultaneous cultivation and monitoring of the oxidative status of living cells. This system consisted of screen-printed electrodes modified by electroplated Pd-NPs as an electrocatalyst (i) and living yeast cells (Saccharomyces cerevisiae) (ii) immobilized on the cytocompatible alginate layer (iii). Briefly, during the course of electrochemical investigations a novel electroactive compound methylhydrazine derivative as a secondary metabolite and result of microbial activity was found in yeast cells and used as a signaling molecule for their biochemical profiling. Under the optimized experimental conditions the signal corresponding to the found electroactive secondary metabolite formed in medium of living cells was measured without sample collecting, transport, storage or pre-treatment steps (i.e. extraction, pre-concentration, chemical derivatization or labeling). The electrochemical dependencies, which were derived by a miniaturized electroanalytical system, were fully validated in a conventional three-electrode system under inert atmosphere (Ar) and in the presence of oxygen (air, O2). It is believed that the proposed one-pot nanoreactors serving simultaneously as nanofermenters and amperometric detectors for the quantification of secondary metabolites formed in medium of living cells can significantly enhance the understanding of ongoing fermentation processes in the future and our knowledge on the biochemistry of yeasts.

Ultrasonic-assisted preparation of ultrafine Pd nanocatalysts loaded on Cl--intercalated MgAl layered double hydroxides for the catalytic dehydrogenation of dodecahydro-N-ethylcarbazole.

N-ethylcarbazole/dodecahydro-N-ethylcarbazole (NEC/H12-NEC) is a promising LOHC, and the development of a catalyst with high activity and stability is the key to realizing its reversible hydrogen storage process. In this paper, ultrafine Pd nanocrystalline catalysts (Pd/LDHs-us) supported on Cl--intercalated MgAl LDHs were prepared by a simple ultrasonic-assisted reduction method and applied in the dehydrogenation of 12H-NEC. In the process of ultrasonic-assisted reduction, the instantaneous high temperature generated by cavitation decomposed part of the CO32- in LDHs interlayer, and promoted PdCl42- to enter the interlayer and become new intercalated ions. At the same time, hydroxyl groups on the surface of LDHs were excited to generate hydrogen radicals (•H) with strong reducibility, which reduced PdCl42- to Pd nanoparticles (PdNPs) in situ. The remaining Cl- ions continued to exist in the interlayer as intercalated ions. The agglomeration of PdNPs was effectively inhibited, and the average particle size was 1.8 nm, which was uniformly dispersed on LDHs, which improved the catalytic activity of Pd/LDHs-us. The coordination between PdNPs and oxygen in the hydroxyl groups on the surface of LDHs improved its catalytic stability. Using Pd/LDHs-us catalyst, the conversion rate of H12-NEC was 100.0 %, and the dehydrogenation efficiency was 99.3 % at 180℃. When the reaction temperature drops to 170℃, the dehydrogenation efficiency can still reach 94.6 %, showing excellent catalytic performance. The study of dehydrogenation kinetics shows that the apparent activation energy of Pd/LDHs-us catalyst is only 90.97 kJ/mol. This provides a new method and idea for the preparation of efficient dehydrogenation catalysts in the future.

Azo dyes degradation by microorganisms - An efficient and sustainable approach.

Synthetic aromatic compounds consisting of various functional groups are known as dyes. These colored compounds are often discharged in effluents, and they are very dangerous to aquatic life. Basically, the dye industry started by using natural plant and insect sources, and then suddenly turned into artificial manufacturing. Natural equilibrium of our environment gets changed by the reduction in photosynthetic activity due to the dyes. In China 900,000 tons of all kinds of dyes are usually produced, which are used in many industries like food, textile, food, paper and leather. Untreated wastewater contaminates aquatic bodies by causing eutrophication, change in water color, oxygen depletion which affect aquatic organisms to a great extent. Dye wastewater is now the key environmental pollution form. In recent eras an extensive study line has been developed to explore the dye decolorization and biodegradation under both aerobic as well as anaerobic conditions. In this review, the chemistry, toxicity and microbial biodegradation/decolorization are presented. Some recent studies along with the new techniques and methodologies of remediating the dye pollution are also discussed to provide the bases of their handling. Overall, efficient and high biodegradation potential make microbes an impending foundation for green chemistry to eradicate toxic dyes from industrial wastewater.

Characterization, Antimicrobial and Anticancer Properties of Palladium Nanoparticles Biosynthesized Optimally Using Saudi Propolis.

Due to their unique physicochemical characteristics, palladium nanoparticles (Pd-NPs) have shown tremendous promise in biological applications. The biosynthesis of Pd-NPs employing Saudi propolis has been designed to be environmental, fast, controlled, and cost-effective. The formation and stability of biosynthesized Pd-NPs by Saudi propolis extract were proved by ultraviolet-visible spectrophotometry (UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), and Zeta potential analysis. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) findings show that the average particle size of Pd-NPs is between 3.14 and 4.62 nm, which is in quantum scale. The Saudi propolis enhanced the antimicrobial activity against B. subtilis, S. aureus, E. coli, K. pneumoniae, and C. albicans. Pd-NPs show effective anticancer activity against ductal carcinoma (MCF-7) with IC50 of 104.79 µg/mL.

Phytoassisted synthesis and characterization of palladium nanoparticles (PdNPs); with enhanced antibacterial, antioxidant and hemolytic activities.

With increasing demand for the treatment of microbial resistance around the globe, it is necessary to develop metallic nanoparticles , ideally by the use of nontoxic medium i.e. plant constituents, that could arrest the microbial growth. For this reason, small and highly crystalline PdNPs were effectively synthesized by using Eryngium caeruleum leaf extract as both the reducing and capping agent. During the synthesis of PdNPs, the size and shape were made controlled by using different solvents i.e., ethanol, methanol and aqueous extract of Eryngium caeruleum. A series of physicochemical characterizations were applied to inquire the synthesis, crystal structure, particles size, and surface morphology of PdNPs. Furthermore, the PdNPs demonstrated excellent potential for the inactivation of gram-positive and gram-negative bacteria, where the methanol-PdNPs exhibited maximum growth inhibition zones against tested bacteria as compared to ethanol-PdNPs and aqueous-PdNPs. Besides, PdNPs showed better antioxidant activity to effectively scavenge 2, 2 diphenyl-1-picrylhydrazyl (DPPH). More importantly, the synthesized PdNPs are not only active for ROS generation but also show no hemolytic activity. We believe that this greener approach uncovered the useful and efficient applications of highly active PdNPs and their biocompatibility.

Acacia gum versus pectin in fabrication of catalytically active palladium nanoparticles for dye discoloration.

Obedience to the aspects of green chemistry and due to its high catalytic potency, ecofriendly synthesis of palladium nanoparticles (PdNPs) was performed using pectin versus acacia gum as polysaccharides. The viscous solution of alkali solubilized polysaccharides acted superiorly in stabilization of MNPs by decreasing their Brownian motions and sequentially decreased their collision and coagulation. Production of PdNPs preliminary was confirmed via UV-visible spectra. Zetasizer and transmission electron microscopy data, the particle size of PdNPs were prepared by pectin (27.9 nm) is larger than that by acacia gum (5.3 nm). XRD and FT-IR data affirmed the redox reaction between biopolymers and metal ions to produce PdNPs. PdNPs synthesized by acacia gum were characterized by higher surface area (19.54 m2/g) compared to that prepared by pectin (3.67 m2/g). Additionally, PdNPs synthesized by acacia gum were exhibited by fastest rate of dye discoloration, resulting in complete reductive discoloration of dye after only 5 min and t1/2 was estimated to be 1.70 min, while, k1 was 408.8 × 10-3 min-1. The presented green technique could be successively applicable for synthesis of size regulated catalytically active PdNPs to be employable in various industrial purposes.

Metal-dependent nano-catalysis in reduction of aromatic pollutants.

Nanostructures have great potential in catalysis and their compositions may cause some interferences in the reactivity. Therefore, the present study focuses on comparison between three metallic nanoparticle-based Ag, Au, and Pd as nano-catalyst in reduction of aromatic pollutants. To neglect any interpenetration in their catalytic reactivity, the metallic nanoparticles were prepared via a consistent and reproducible one-step method with alkali-activated dextran. Interestingly, small sized/spherical AgNPs, AuNPs, and PdNPs were successively prepared with particle size of 3.4, 8.3, and 17.1 nm, respectively. The catalytic performance of the synthesized NPs was estimated for the reduction of p-nitroaniline and methyl red dye as different aromatic pollutants. Regardless of the particle size, there was a strong relation between catalytic action and the type of metal which followed the order of PdNP > AuNPs > AgNPs. Graphical Abstract.

Electrochemical tuning of alcohol oxidase and dehydrogenase catalysis via biosensing towards butanol-1 detection in fermentation media.

A novel approach for electrochemical tuning of alcohol oxidase (AOx) and alcohol dehydrogenase (ADH) biocatalysis towards butanol-1 oxidation by incorporating enzymes in various designs of amperometric biosensors is presented. The biosensors were developed by using commercial graphene oxide-based screen-printed electrodes and varying enzyme producing strains, encapsulation approaches (layer-by-layer (LbL) or one-step electrodeposition (EcD)), layers composition and structure, operating conditions (applied potential values) and introducing mediators (Meldola Blue and Prussian Blue) or Pd-nanoparticles (Pd-NPs). Simultaneous analysis/screening of multiple crucial system parameters during the enzyme engineering process allowed to identify within a period of one month that four out of twelve proposed designs demonstrated a good signal reproducibility and linear response (up to 14.6 mM of butanol) under very low applied potentials (from -0.02 to -0.32 V). Their mechanical stability was thoroughly investigated by multi-analytical techniques prior to butanol determination in cell-free samples from an anaerobic butanol fermentation. The EcD-based biosensor that incorporates ADH, NAD+, Pd-NPs and Nafion showed no loss of enzyme activity after preparation and demonstrated capabilities towards low potential (-0.12 V) detection of butanol-1 in fermentation medium (4 mM) containing multiple electroactive species with almost 15 times enhanced sensitivity (0.2282 µA/mM ± 0.05) when compared to the LbL design. Furthermore, the ADH-Nafion bonding for the S. cerevisiae strain was confirmed to be 3 times higher than for E. coli.

Sterically Hindered Phosphonium Salts: Structure, Properties and Palladium Nanoparticle Stabilization.

A new family of sterically hindered alkyl(tri-tert-butyl) phosphonium salts (n-CnH2n+1 with n = 2, 4, 6, 8, 10, 12, 14, 16, 18, 20) was synthesized and evaluated as stabilizers for the formation of palladium nanoparticles (PdNPs), and the prepared PdNPs, stabilized by a series of phosphonium salts, were applied as catalysts of the Suzuki cross-coupling reaction. All investigated phosphonium salts were found to be excellent stabilizers of metal nanoparticles of small catalytically active size with a narrow size distribution. In addition, palladium nanoparticles exhibited exceptional stability: the presence of phosphonium salts prevented agglomeration and precipitation during the catalytic reaction.

Recyclable Amphiphilic Metal Nanoparticle Colloid Enabled Atmospheric Oxidation of Alcohols.

Developing amphiphilic colloid catalysts is essentially important for realizing environmentally benign biphasic catalysis under atmospheric conditions. Herein, a linear structured plant polyphenol was employed as an amphiphilic stabilizer for preparing a series of amphiphilic Pd nanoparticles (PdNPs) colloids. For the as-prepared PdNPs colloids, the phenolic hydroxyls of plant polyphenols were responsible for the stabilization of PdNPs, whereas the rigid aromatic scaffold of plant polyphenols effectively suppressed the PdNPs from aggregation by providing a high steric effect. Thanks to the coexistence of hydrophilic phenolic hydroxyls and hydrophobic aromatic rings, the plant polyphenols induced tunable amphiphilic properties into the PdNPs, allowing an easier wetting of PdNPs with the substrate molecules. By tuning the content of plant polyphenols in the colloid, the particle size (3.17-4.73 nm) and the dispersity of the PdNPs were facilely controlled. When applied for atmospheric oxidation of insoluble alcohols in water by air, the amphiphilic PdNPs preferentially absorbed the alcohol substrates to create a relatively high-substrate-concentration microenvironment, which improved the mass transfer in the biphasic catalysis, allowing the proceeding of low-temperature (50 °C) atmospheric oxidation of diverse alcohols with high catalytic conversion, including aliphatic alcohols, cyclic aliphatic alcohols, and aromatic alcohols. Furthermore, the amphiphilic PdNPs colloid also exhibited excellent reusability with a conversion yield high up to 97.96% in the fifth cycle. In contrast, the control catalysts of poly(vinylpyrrolidone)- and poly(ethylene glycol)-stabilized PdNPs were completely inactivated in the fifth cycle. As a consequence, our findings provided a new route for developing an environmentally benign aqueous colloid catalyst that is both highly active and recyclable for mild biphasic oxidation reaction systems.

Mussel-Inspired Catechol-Formaldehyde Resin-Coated Fe3O4 Core-Shell Magnetic Nanospheres: An Effective Catalyst Support for Highly Active Palladium Nanoparticles.

Magnetic Fe3O4@catechol-formaldehyde resin (CFR) core-shell nanospheres were fabricated via a controllable hydrothermal method. The shell thickness of Fe3O4@CFR nanospheres can be effectively regulated in the range of 10-170 nm via adjusting reaction parameters. In particular, catechol groups on the surface of nanospheres also play a significant role in mussel-inspired chemistry to further combine with graphene oxide (GO) to wrap the Fe3O4@CFR spheres. The obtained Fe3O4@CFR and Fe3O4@CFR@GO nanospheres can be used as the effective catalyst supports of small Pd nanoparticles (PdNPs, <10 nm) formed via an in situ synthesis route. The as-fabricated nanohybrid catalysts of Fe3O4@CFR@PdNPs and Fe3O4@CFR@GO@PdNPs with excellent dispersibility and stability are reusable after magnetic separation from catalytic systems. In particular, a super active performance was demonstrated for the catalytic reduction of methylene blue dye with highest turnover frequency (5260 min-1) yet reported in the literature using a very low dosage of the Fe3O4@CFR@GO@PdNP catalyst. In addition, the Fe3O4@CFR@GO@PdNP catalyst also exhibits a highly catalytic efficiency for the Suzuki coupling reaction using pure water as a green solvent at room temperature.

Biofabrication of polyphenols coated Nano palladium and its in-vitro cytotoxicity against human leukemia cell lines (K562).

The biofabrication of palladium nanoparticles (PdNPs) using aqueous leaf extract of Pelargonium graveolens is reported herein. The polyphenols present in the Pelargonium graveolens extract are mainly responsible for reduction and subsequent stabilization of formed PdNPs. UV-Visible spectroscopy (UV-Vis) absorption and reaction color change from yellow to brown indicated the formation of PdNPs. The as synthesized PdNPs were studied by using characterization techniques such as Fourier transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), Energy dispersive spectroscopy (EDS), Zeta potential measurements and Selected area electron diffraction (SAED). FTIR analysis and Zeta potential measurements showed the capping of polyphenols onto the surface of PdNPs, which further responsible for preventing aggregation of PdNPs. TEM image showed that the PdNPs exists in the range from 50 to 150nm. Also, XRD pattern revealed the crystalline nature of as synthesized PdNPs. The in vitro cytotoxicity studies of Pelargonium graveolens extract capped PdNPs was conducted using human leukemia cell lines (K562) by following an MTT cell viability assay and is found that the cytotoxicity is dose dependent. Further, the synthesized PdNPs will open a new opportunities in the field of biomedicine. Also, the produced method is an alternative to the chemical synthetic approaches that are being used nowadays.