RESUMEN
Bacteria frequently store excess carbon in hydrophobic granules of polyhydroxybutyrate (PHB) that in some growth conditions can occupy most of the cytoplasmic space. Different types of proteins associate to the surface of the granules, mainly enzymes involved in the synthesis and utilization of the reserve polymer and a diverse group of proteins known as phasins. Phasins have different functions, among which are regulating the size and number of the granules, modulating the activity of the granule-associated enzymes and helping in the distribution of the granules inside the cell. Caulobacter crescentus is an oligotrophic bacterium that shows several morphological and regulatory traits that allow it to grow in very nutrient-diluted environments. Under these conditions, storage compounds should be particularly relevant for survival. In this work, we show an initial proteomic characterization of the PHB granules and describe a new type of phasin (PhaH) characterized by the presence of an N-terminal hydrophobic helix followed by a helix-hairpin-helix (HhH) domain. The hydrophobic helix is required for maximal PHB accumulation and maintenance during the stationary phase while the HhH domain is involved in determining the size of the PHB granules and their distribution in the cell.
Asunto(s)
Caulobacter crescentus , Caulobacter crescentus/genética , Caulobacter crescentus/metabolismo , Proteómica , Proteínas Bacterianas/metabolismo , Hidroxibutiratos/metabolismo , Poliésteres/metabolismoRESUMEN
This study synthesized poly(3-hydroxypropionate) [P(3HP)]-containing polyhydroxyalkanoate (PHA) block copolymers, P(3HP)-b-P[2-hydroxybutyrate (2HB)] and P(3HP)-b-P(D-lactate) (PDLA), using Escherichia coli. The cells expressing an evolved sequence-regulating PHA synthase, PhaCARNDFH, and propionyl-CoA transferase were cultured with the supplementation of the corresponding monomer precursors in the medium. The block structure of P(3HP)-b-PDLA was confirmed by proton nuclear magnetic resonance analysis and solvent fractionation. The molecular weights of the polymers were in the range of 0.8-2.8 × 105. The solvent-cast polymer films were subjected to isothermal treatment to promote phase separation and crystallization and were subsequently melt-quenched to produce an amorphous phase. The melt-quenched P(3HP)-b-P(2HB) film exhibited a high elongation at break (1153%), resulting in a toughness of 181 MJ/m3. The solvent-cast film of P(3HP)-b-65 mol% PDLA exhibited partial elastic deformation, in which the P(3HP) phase functioned as a soft segment. The melt-quenching of the polymer resulted in embrittlement presumably due to the high lactate fraction. Overall, the P(3HP)-based block copolymers exhibited several mechanical properties depending on the higher-order structure of the polymer and the properties of the P(2-hydroxyalkanoate) segments. This study findings show that P(3HP)-b-P(2HB) and P(3HP)-b-PDLA can function excellently if their microstructures are properly controlled.
RESUMEN
BACKGROUND: Polyhydroxybutyrate is a biopolymer produced by bacteria and archaea under nitrogen-limiting conditions. PHB is an essential polymer in the bioplastic sector because of its biodegradability, eco-friendliness, and adaptability. The characterization of PHB is a multifaceted process for studying the structure and its properties. This entire aspect can assure the long-term viability and performance attributes of the PHB. The characteristics of PHB extracted from the halophile Brachybacterium paraconglomeratum were investigated with the objective of making films for application in healthcare. RESULTS: This was the first characterization study on PHB produced by a rare halophile, Brachybacterium paraconglomeratum (MTCC 13074). In this study, the strain produced 2.72 g/l of PHB for.5.1 g/l of biomass under optimal conditions. Methods are described for the determination of the physicochemical properties of PHB. The prominent functional groups CH3 and C = O were observed by FT-IR and the actual chemical structure of the PHB was deduced by NMR. GCMS detects the confirmation of four methyl ester derivatives of the extracted PHB in the sample. Mass spectrometry revealed the molecular weight of methyl 3-hydroxybutyric acid (3HB) present in the extract. The air-dried PHB films were exposed to TGA, DSC and a universal testing machine to determine the thermal profile and mechanical stability. Additionally, the essential property of biopolymers like viscosity was also assessed for the extracted PHB. CONCLUSIONS: The current study demonstrated the consistency and quality of B. paraconglomeratum PHB. Therefore, Brachybacterium sps are also a considerable source of PHB with desired characteristics for industrial production.
Asunto(s)
Actinobacteria , Actinomycetales , Polihidroxibutiratos , Espectroscopía Infrarroja por Transformada de Fourier , Polímeros , Biopolímeros , Hidroxibutiratos/químicaRESUMEN
Acetoin, a versatile platform chemical and popular food additive, poses a challenge to the biosafety strain Bacillus subtilis when produced in high concentrations due to its intrinsic toxicity. Incorporating the PHB synthesis pathway into Bacillus subtilis 168 has been shown to significantly enhance the strain's acetoin tolerance. This study aims to elucidate the molecular mechanisms underlying the response of B. subtilis 168-phaCBA to acetoin stress, employing transcriptomic and metabolomic analyses. Acetoin stress induces fatty acid degradation and disrupts amino acid synthesis. In response, B. subtilis 168-phaCBA down-regulates genes associated with flagellum assembly and bacterial chemotaxis, while up-regulating genes related to the ABC transport system encoding amino acid transport proteins. Notably, genes coding for cysteine and D-methionine transport proteins (tcyB, tcyC and metQ) and the biotin transporter protein bioY, are up-regulated, enhancing cellular tolerance. Our findings highlight that the expression of phaCBA significantly increases the ratio of long-chain unsaturated fatty acids and modulates intracellular concentrations of amino acids, including L-tryptophan, L-tyrosine, L-leucine, L-threonine, L-methionine, L-glutamic acid, L-proline, D-phenylalanine, L-arginine, and membrane fatty acids, thereby imparting acetoin tolerance. Furthermore, the supplementation with specific exogenous amino acids (L-alanine, L-proline, L-cysteine, L-arginine, L-glutamic acid, and L-isoleucine) alleviates acetoin's detrimental effects on the bacterium. Simultaneously, the introduction of phaCBA into the acetoin-producing strain BS03 addressed the issue of insufficient intracellular cofactors in the fermentation strain, resulting in the successful production of 70.14 g/L of acetoin through fed-batch fermentation. This study enhances our understanding of Bacillus's cellular response to acetoin-induced stress and provides valuable insights for the development of acetoin-resistant Bacillus strains.
Asunto(s)
Acetoína , Bacillus subtilis , Bacillus subtilis/genética , Bacillus subtilis/metabolismo , Acetoína/metabolismo , Ácido Glutámico/metabolismo , Fermentación , Perfilación de la Expresión Génica , Arginina , Proteínas Portadoras/genética , Prolina/metabolismoRESUMEN
BACKGROUND: Polyhydroxybutyrate (PHB) has emerged as a promising eco-friendly alternative to traditional petrochemical-based plastics. In the present study, we isolated and characterized a new strain of Salinicola salarius, a halophilic bacterium, from the New Suez Canal in Egypt and characterized exclusively as a potential PHB producer. Further genome analysis of the isolated strain, ES021, was conducted to identify and elucidate the genes involved in PHB production. RESULTS: Different PHB-producing marine bacteria were isolated from the New Suez Canal and characterized as PHB producers. Among the 17 bacterial isolates, Salinicola salarius ES021 strain showed the capability to accumulate the highest amount of PHB. Whole genome analysis was implemented to identify the PHB-related genes in Salinicola salarius ES021 strain. Putative genes were identified that can function as phaCAB genes to produce PHB in this strain. These genes include fadA, fabG, and P3W43_16340 (encoding acyl-CoA thioesterase II) for PHB production from glucose. Additionally, phaJ and fadB were identified as key genes involved in PHB production from fatty acids. Optimization of environmental factors such as shaking rate and incubation temperature, resulted in the highest PHB productivity when growing Salinicola salarius ES021 strain at 30°C on a shaker incubator (110 rpm) for 48 h. To maximize PHB production economically, different raw materials i.e., salted whey and sugarcane molasses were examined as cost-effective carbon sources. The PHB productivity increased two-fold (13.34 g/L) when using molasses (5% sucrose) as a fermentation media. This molasses medium was used to upscale PHB production in a 20 L stirred-tank bioreactor yielding a biomass of 25.12 g/L, and PHB of 12.88 g/L. Furthermore, the produced polymer was confirmed as PHB using Fourier-transform infrared spectroscopy (FTIR), gas chromatography-mass spectroscopy (GC-MS), and nuclear magnetic resonance spectroscopy (NMR) analyses. CONCLUSIONS: Herein, Salinicola salarius ES021 strain was demonstrated as a robust natural producer of PHB from agro-industrial wastes. The detailed genome characterization of the ES021 strain presented in this study identifies potential PHB-related genes. However, further metabolic engineering is warranted to confirm the gene networks required for PHB production in this strain. Overall, this study contributes to the development of sustainable and cost-effective PHB production strategies.
Asunto(s)
Halomonadaceae , Residuos Industriales , Polihidroxibutiratos , Plásticos , Polímeros , Hidroxibutiratos/metabolismo , Poliésteres/metabolismoRESUMEN
BACKGROUND: Wastewater treatment plants contribute approximately 6% of anthropogenic methane emissions. Methanotrophs, capable of converting methane into polyhydroxybutyrate (PHB), offer a promising solution for utilizing methane as a carbon source, using activated sludge as a seed culture for PHB production. However, maintaining and enriching PHB-accumulating methanotrophic communities poses challenges. RESULTS: This study investigated the potential of Methylosinus trichosporium OB3b to bioaugment PHB-accumulating methanotrophic consortium within activated sludge to enhance PHB production. Waste-activated sludges with varying ratios of M. trichosporium OB3b (1:0, 1:1, 1:4, and 0:1) were cultivated. The results revealed substantial growth and methane consumption in waste-activated sludge with M. trichosporium OB3b-amended cultures, particularly in a 1:1 ratio. Enhanced PHB accumulation, reaching 37.1% in the same ratio culture, indicates the dominance of Type II methanotrophs. Quantification of methanotrophs by digital polymerase chain reaction showed gradual increases in Type II methanotrophs, correlating with increased PHB production. However, while initial bioaugmentation of M. trichosporium OB3b was observed, its presence decreased in subsequent cycles, indicating the dominance of other Type II methanotrophs. Microbial community analysis highlighted the successful enrichment of Type II methanotrophs-dominated cultures due to the addition of M. trichosporium OB3b, outcompeting Type I methanotrophs. Methylocystis and Methylophilus spp. were the most abundant in M. trichosporium OB3b-amended cultures. CONCLUSIONS: Bioaugmentation strategies, leveraging M. trichosporium OB3b could significantly enhance PHB production and foster the enrichment of PHB-accumulating methanotrophs in activated sludge. These findings contribute to integrating PHB production in wastewater treatment plants, providing a sustainable solution for resource recovery.
Asunto(s)
Hidroxibutiratos , Metano , Methylosinus trichosporium , Aguas del Alcantarillado , Aguas del Alcantarillado/microbiología , Methylosinus trichosporium/metabolismo , Hidroxibutiratos/metabolismo , Metano/metabolismo , Poliésteres/metabolismo , Biodegradación Ambiental , Aguas Residuales/microbiología , PolihidroxibutiratosRESUMEN
The microbial production of polyhydroxyalkanoate (PHA) block copolymers has attracted research interests because they can be expected to exhibit excellent physical properties. Although post-polymerization conjugation and/or extension have been used for PHA block copolymer synthesis, the discovery of the first sequence-regulating PHA synthase, PhaCAR, enabled the direct synthesis of PHA-PHA type block copolymers in microbial cells. PhaCAR spontaneously synthesizes block copolymers from a mixture of substrates. To date, Escherichia coli and Ralstonia eutropha have been used as host strains, and therefore, sequence regulation is not a host-specific phenomenon. The monomer sequence greatly influences the physical properties of the polymer. For example, a random copolymer of 3-hydroxybutyrate and 2-hydroxybutyrate deforms plastically, while a block copolymer of approximately the same composition exhibits elastic deformation. The structure of the PHA block copolymer can be expanded by in vitro evolution of the sequence-regulating PHA synthase. An engineered variant of PhaCAR can synthesize poly(D-lactate) as a block copolymer component, which allows for greater flexibility in the molecular design of block copolymers. Therefore, creating sequence-regulating PHA synthases with a further broadened substrate range will expand the variety of properties of PHA materials. This review summarizes and discusses the sequence-regulating PHA synthase, analytical methods for verifying block sequence, properties of block copolymers, and mechanisms of sequence regulation. KEY POINTS: ⢠Spontaneous monomer sequence regulation generates block copolymers ⢠Poly(D-lactate) segment can be synthesized using a block copolymerization system ⢠Block copolymers exhibit characteristic properties.
Asunto(s)
Cupriavidus necator , Polihidroxialcanoatos , Ácido Láctico , Ácido 3-Hidroxibutírico , Cupriavidus necator/genética , Escherichia coli/genéticaRESUMEN
Poly-ß-hydroxybutyrate (PHB) is a potential source of biodegradable plastics that are environmentally friendly due to their complete degradation to water and carbon dioxide. This study aimed to investigate PHB production in the cyanobacterium Synechocystis sp. PCC6714 MT_a24 in an outdoor bioreactor using urban wastewater as a sole nutrient source. The culture was grown in a thin-layer raceway pond with a working volume of 100 L, reaching a biomass density of up to 3.5 g L-1 of cell dry weight (CDW). The maximum PHB content was found under nutrient-limiting conditions in the late stationary phase, reaching 23.7 ± 2.2% PHB per CDW. These data are one of the highest reported for photosynthetic production of PHB by cyanobacteria, moreover using urban wastewater in pilot-scale cultivation which multiplies the potential of sustainable cultivation approaches. Contamination by grazers (Poterioochromonas malhamensis) was managed by culturing Synechocystis in a highly alkaline environment (pH about 10.5) which did not significantly affect the culture growth. Furthermore, the strain MT_a24 showed significant wastewater nutrient remediation removing about 72% of nitrogen and 67% of phosphorus. These trials demonstrate that the photosynthetic production of PHB by Synechocystis sp. PCC6714 MT_a24 in the outdoor thin-layer bioreactor using urban wastewater and ambient carbon dioxide. It shows a promising approach for the cost-effective and sustainable production of biodegradable carbon-negative plastics. KEY POINTS: ⢠High PHB production by cyanobacteria in outdoor raceway pond ⢠Urban wastewater used as a sole source of nutrients for phototrophic growth ⢠Potential for cost-effective and sustainable production of biodegradable plastics.
Asunto(s)
Plásticos Biodegradables , Synechocystis , Dióxido de Carbono , Hidroxibutiratos , Poliésteres , Estanques , Aguas ResidualesRESUMEN
A marine bacterial strain, named NTOU-MSR1T, was isolated from marine sediment of northern coast of Taiwan. This bacterium was Gram-stain-negative, aerobic, and motile, with a single flagellum. Its rod-shaped cells measured approximately 0.5-0.6 µm in width and 1.8-2.0 µm in length. NTOU-MSR1T grew at temperatures ranging from 10 to 45 °C, optimally at 30 °C. The pH range for growth was 7.0-10.0, with optimal growth at pH 7.0-8.0. It tolerated NaCl concentrations up to 12%. The cell membrane predominantly contained fatty acids such C16:1ω7c, C18:1ω7c, and C16:0. The overall genome relatedness indices indicated that strain NTOU-MSR1T had an average nucleotide identity (ANI) of 87.88% and a digital DNA-DNA hybridization (dDDH) value of 35.40% compared to its closest related species, O. marisflavi 102-Na3T. These values fell below the 95% and 70% threshold for species delineation, respectively. These findings suggested that the strain NTOU-MSR1T was a new member of the Oceanimonas genus. Its genomic DNA had a G + C content of 61.0 mol%. Genomic analysis revealed genes associated with the catechol branch of ß- ketoadipate pathway for degrading polycyclic aromatic hydrocarbons, resistance to heavy metal, biosynthesis of polyhydroxybutyrate and the production of glycoside hydrolases (GH19, GH23, and GH103) for chitin and glycan digestion. Additionally, NTOU-MSR1T was capable of synthesizing biosurfactants and potentially degrading plastic. The proposed name for this new species is Oceanimonas pelagia, with the type strain designated as NTOU-MSR1T (= BCRC 81403T = JCM 36023T).
Asunto(s)
Bacterias , Flagelos , Membrana Celular , Sedimentos Geológicos , ADNRESUMEN
Nitrogen limitation imposes a major transition in the lifestyle of nondiazotrophic cyanobacteria that is controlled by a complex interplay of regulatory factors involving the pervasive signal processor PII Immediately upon nitrogen limitation, newly fixed carbon is redirected toward glycogen synthesis. How the metabolic switch for diverting fixed carbon toward the synthesis of glycogen or of cellular building blocks is operated was so far poorly understood. Here, using the nondiazotrophic cyanobacterium Synechocystis sp. PCC 6803 as model system, we identified a novel PII interactor, the product of the sll0944 gene, which we named PirC. We show that PirC binds to and inhibits the activity of 2,3-phosphoglycerate-independent phosphoglycerate mutase (PGAM), the enzyme that deviates newly fixed CO2 toward lower glycolysis. The binding of PirC to either PII or PGAM is tuned by the metabolite 2-oxoglutarate (2-OG), which accumulates upon nitrogen starvation. In these conditions, the high levels of 2-OG dissociate the PirC-PII complex to promote PirC binding to and inhibition of PGAM. Accordingly, a PirC-deficient mutant showed strongly reduced glycogen levels upon nitrogen deprivation, whereas polyhydroxybutyrate granules were overaccumulated compared to wild-type. Metabolome analysis revealed an imbalance in 3-phosphoglycerate to pyruvate levels in the pirC mutant, confirming that PirC controls the carbon flux in cyanobacteria via mutually exclusive interaction with either PII or PGAM.
Asunto(s)
Proteínas Bacterianas/genética , Cianobacterias/genética , Proteínas PII Reguladoras del Nitrógeno/genética , Fosfoglicerato Mutasa/genética , Proteínas Bacterianas/metabolismo , Carbono/metabolismo , Cianobacterias/metabolismo , Nitrógeno/metabolismo , Proteínas PII Reguladoras del Nitrógeno/metabolismo , Fosfoglicerato Mutasa/metabolismo , Synechocystis/genética , Synechocystis/metabolismoRESUMEN
Biodegradation rates and mechanical properties of poly(3-hydroxybutyrate) (PHB) composites with green algae and cyanobacteria were investigated for the first time. To the authors knowledge, the addition of microbial biomass led to the biggest observed effect on biodegradation so far. The composites with microbial biomass showed an acceleration of the biodegradation rate and a higher cumulative biodegradation within 132 days compared to PHB or the biomass alone. In order to determine the causes for the faster biodegradation, the molecular weight, the crystallinity, the water uptake, the microbial biomass composition and scanning electron microscope images were assessed. The molecular weight of the PHB in the composites was lower than that of pure PHB while the crystallinity and microbial biomass composition were the same for all samples. A direct correlation of water uptake and crystallinity with biodegradation rate could not be observed. While the degradation of molecular weight of PHB during sample preparation contributed to the improvement of biodegradation, the main reason was attributed to biostimulation by the added biomass. The resulting enhancement of the biodegradation rate appears to be unique in the field of polymer biodegradation. The tensile strength was lowered, elongation at break remained constant and Young's modulus was increased compared to pure PHB.
Asunto(s)
Hidroxibutiratos , Poliésteres , Polihidroxibutiratos , Ácido 3-Hidroxibutírico , Poliésteres/metabolismo , Hidroxibutiratos/metabolismo , Biomasa , Agua , Biodegradación AmbientalRESUMEN
Inulin is a fructose-based polysaccharide that can be found in several plant species, from grass and onions to chicory roots; thus, it has the potential to be an excellent renewable source of fructose for several industrial applications. Among them, inulin hydrolysis can be coupled to a fermentation operation to produce polyhydroxybutyrate (PHB) using Cupriavidus necator H16. This work reports the PHB production process involving chicory root inulin hydrolysis using inulinase Novozym 960 followed by a C. necator fermentation. It was found that the maximum saccharification (95% wt.) was reached at 269 U/ginulin after 90 min. The hydrolysates obtained were then inoculated with C. necator, leading to a biomass concentration of 4 g/L with 30% (w/w) polymer accumulation. Although PHB production was low, during the first hours, the cell growth and polymer accumulation detected did not coincide with a fructose concentration decrease, suggesting a simultaneous saccharification and fermentation process, potentially alleviating the product inhibition inherent to the inulinase-fructose system. The characterization of the obtained PHB showed a polymer with more homogeneous values of Mw, and better thermal stability than PHB produced using pure fructose as a fermentation substrate. The results obtained demonstrate a viable alternative carbon substrate for PHB production, opening the possibility for inulin-rich renewable feedstock valorization.
Asunto(s)
Cupriavidus necator , Inulina , Fermentación , Inulina/metabolismo , Polihidroxibutiratos , Fructosa , HidroxibutiratosRESUMEN
Biological conversion of waste methane to biodegradable plastics is a way of reducing their production cost. This study addresses the computational modeling of the growth phase reactor of the process of polyhydroxybutyrate production. The model was used for investigating the effect of gas recycling and inlet gas retention time on the reactor performance. The model was run by the use of a genome-scale metabolic network of Methylocystis hirsuta in a dynamic flux balance analysis framework. The reactor has been modeled for two separate feeding scenarios: a pure methane feed and a biogas feed. The mass transfer coefficient parameter was predicted as a function of superficial gas velocities by the regression of data from published experiments. The results show an increase of removal efficiency by 38% and biomass concentration by 2.8 g/L with the increase of gas recycle ratio from 0 to 30 at the empty bed residence time of 60 min .
Asunto(s)
Reactores Biológicos , Metano , Metano/metabolismo , Polihidroxibutiratos , Simulación por Computador , Redes y Vías MetabólicasRESUMEN
Lignocellulosic biomass is a valuable, renewable substrate for the synthesis of polyhydroxybutyrate (PHB), an ecofriendly biopolymer. In this study, bacterial strain E5-3 was isolated from soil in Japan; it was identified as Burkholderia ambifaria strain E5-3 by 16 S rRNA gene sequencing. The strain showed optimal growth at 37 °C with an initial pH of 9. It demonstrated diverse metabolic ability, processing a broad range of carbon substrates, including xylose, glucose, sucrose, glycerol, cellobiose, and, notably, palm oil. Palm oil induced the highest cellular growth, with a PHB content of 65% wt. The strain exhibited inherent tolerance to potential fermentation inhibitors derived from lignocellulosic hydrolysate, withstanding 3 g/L 5-hydroxymethylfurfural and 1.25 g/L acetic acid. Employing a fed-batch fermentation strategy with a combination of glucose, xylose, and cellobiose resulted in PHB production 2.7-times that in traditional batch fermentation. The use of oil palm trunk hydrolysate, without inhibitor pretreatment, in a fed-batch fermentation setup led to significant cell growth with a PHB content of 45% wt, equivalent to 10 g/L. The physicochemical attributes of xylose-derived PHB produced by strain E5-3 included a molecular weight of 722 kDa, a number-average molecular weight of 191 kDa, and a polydispersity index of 3.78. The amorphous structure of this PHB displayed a glass transition temperature of 4.59 °C, while its crystalline counterpart had a melting point of 171.03 °C. This research highlights the potential of lignocellulosic feedstocks, especially oil palm trunk hydrolysate, for PHB production through fed-batch fermentation by B. ambifaria strain E5-3, which has high inhibitor tolerance.
Asunto(s)
Biomasa , Burkholderia , Fermentación , Hidroxibutiratos , Lignina , Aceite de Palma , ARN Ribosómico 16S , Xilosa , Lignina/metabolismo , Aceite de Palma/metabolismo , Hidroxibutiratos/metabolismo , Burkholderia/metabolismo , Burkholderia/genética , Burkholderia/crecimiento & desarrollo , Xilosa/metabolismo , ARN Ribosómico 16S/genética , Microbiología del Suelo , Glucosa/metabolismo , Poliésteres/metabolismo , Concentración de Iones de Hidrógeno , Furaldehído/metabolismo , Furaldehído/análogos & derivados , Celobiosa/metabolismoRESUMEN
Plant-based co-production of polyhydroxyalkanoates (PHAs) and seed oil has the potential to create a viable domestic source of feedstocks for renewable fuels and plastics. PHAs, a class of biodegradable polyesters, can replace conventional plastics in many applications while providing full degradation in all biologically active environments. Here we report the production of the PHA poly[(R)-3-hydroxybutyrate] (PHB) in the seed cytosol of the emerging bioenergy crop Camelina sativa engineered with a bacterial PHB biosynthetic pathway. Two approaches were used: cytosolic localization of all three enzymes of the PHB pathway in the seed, or localization of the first two enzymes of the pathway in the cytosol and anchoring of the third enzyme required for polymerization to the cytosolic face of the endoplasmic reticulum (ER). The ER-targeted approach was found to provide more stable polymer production with PHB levels up to 10.2% of the mature seed weight achieved in seeds with good viability. These results mark a significant step forward towards engineering lines for commercial use. Plant-based PHA production would enable a direct link between low-cost large-scale agricultural production of biodegradable polymers and seed oil with the global plastics and renewable fuels markets.
Asunto(s)
Brassicaceae , Polihidroxialcanoatos , Biopolímeros , Polihidroxialcanoatos/metabolismo , Poliésteres/metabolismo , Brassicaceae/metabolismo , Aceites de PlantasRESUMEN
Strain 0141_2T was isolated from a temperate grassland soil in Germany and was found to be affiliated with the order Solirubrobacterales. It is most closely related to Baekduia soli BR7-21T, with 98.1â% 16S rRNA gene sequence similarity. Cells are rod-shaped, non-motile, stain Gram-positive and can have multiple vesicles in the cell surface. Polyhydroxybutyrate is accumulated within the cells. Catalase- and oxidase-positive. It is a mesophilic aerobe and grows best around neutral to slightly acidic pH in R2A medium. The major fatty acids are C18â:â1 ω9c, iso-C16â:â0, C18â:â0, C16â:â0, C16â:â1 ω7c and C17â:â1 ω8c. Diphosphatidylglycerol is present. The predominant respiratory quinone is MK-7(H4). Meso-diaminopimelic acid is the diagnostic diamino acid in the cell-wall peptidoglycan. The G+C content of genomic DNA is 72.9 mol%. Based on the results of phenotypic, chemotaxonomic, genomic and phylogenetic analysis, we propose the novel species Baekduia alba sp. nov. with the type strain 0141_2T (=DSM 104299T=LMG 30000T=CECT 9239T).
Asunto(s)
Ácidos Grasos , Fosfolípidos , Ácidos Grasos/química , Fosfolípidos/química , Filogenia , ARN Ribosómico 16S/genética , Pradera , ADN Bacteriano/genética , Análisis de Secuencia de ADN , Composición de Base , Técnicas de Tipificación Bacteriana , Bacterias/genética , Microbiología del SueloRESUMEN
BACKGROUND: Bioplastics are attracting considerable attention, owing to the increase in non-degradable waste. Using microorganisms to degrade bioplastics is a promising strategy for reducing non-degradable plastic waste. However, maintaining bacterial viability and activity during culture and storage remains challenging. With the use of conventional methods, cell viability and activity was lost; therefore, these conditions need to be optimized for the practical application of microorganisms in bioplastic degradation. Therefore, we aimed to optimize the feasibility of the lyophilization method for convenient storage and direct use. In addition, we incoporated protective reagents to increase the viability and activity of lyophilized microorganisms. By selecting and applying the best protective reagents for the lyophilization process and the effects of additives on the growth and PHB-degrading activity of strains were analyzed after lyophilization. For developing the lyophilization method for protecting degradation activity, it may promote practical applications of bioplastic-degrading bacteria. RESULTS: In this study, the polyhydroxybutyrate (PHB)-degrading strain, Bacillus sp. JY14 was lyophilized with the use of various sugars as protective reagents. Among the carbon sources tested, raffinose was associated with the highest cell survival rate (12.1%). Moreover, 7% of raffionose showed the highest PHB degradation yield (92.1%). Therefore, raffinose was selected as the most effective protective reagent. Also, bacterial activity was successfully maintained, with raffinose, under different storage temperatures and period. CONCLUSIONS: This study highlights lyophilization as an efficient microorganism storage method to enhance the applicability of bioplastic-degrading bacterial strains. The approach developed herein can be further studied and used to promote the application of microorganisms in bioplastic degradation.
Asunto(s)
Bacillus , Rafinosa , Carbono , LiofilizaciónRESUMEN
A sustainable biorefining and bioprocessing strategy was developed to produce edible-ulvan films and non-edible polyhydroxybutyrate films. The preparation of edible-ulvan films by crosslinking and plasticisation of ulvan with citric acid and xylitol was investigated using Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) analysis. The edible ulvan film was tested for its gut-friendliness using Lactobacillus and Bifidobacterium spp. (yoghurt) and was shown to improve these gut-friendly microbiome's growth and simultaneously retarding the activity of pathogens like Escherchia coli and Staphylococcus aureus. Green macroalgal biomass refused after the extraction of ulvan was biologically processed by dark fermentation to produce a maximum of 3.48 (± 0.14) g/L of volatile fatty acids (VFAs). Aerobic processing of these VFAs using Cupriavidus necator cells produced 1.59 (± 0.12) g/L of biomass with 18.2 wt% polyhydroxybutyrate. The present study demonstrated the possibility of producing edible and non-edible packaging films using green macroalgal biomass as the sustainable feedstock.
Asunto(s)
Polihidroxialcanoatos , Algas Marinas , Ulva , Ulva/química , Algas Marinas/química , Polisacáridos/química , VerdurasRESUMEN
This work aimed to produce porous poly-hydroxybutyrate (PHB) pellets in order to evaluate the pellets as a support for immobilization of the metagenomic lipase, LipG9. Four types of pelletized PHB particles with different morphological characteristics were obtained using the double emulsion and solvent evaporation technique (DESE). The micropores of these PHB pellets had similar average diameters (about 3 nm), but the pellets had different specific surface areas: 11.7 m2 g-1 for the PHB powder, 8.4 m2 g-1 for the control pellets (Ø < 0.5 mm, produced without the pore forming agent), 10.0 m2 g-1 for the small pellets (Ø < 0.5 mm), 9.5 m2 g-1 for the medium pellets (0.5 < Ø < 0.8 mm) and 8.4 m2 g-1 for the large pellets (Ø > 1.4 mm). Purified LipG9 was immobilized by adsorption on these pellets, and the results were compared with those obtained with PHB powder. The highest immobilization yield (83%) was obtained for the medium PHB pellets, followed by large (76%) and small (55%) PHB pellets. The activity of LipG9 immobilized on the pellets, for the synthesis of ethyl oleate in n-hexane, was highest for the medium pellets (22 U g-1 ). The immobilization yield was high for PHB powder (99%) but the esterification activity was slightly lower (20 U g-1 ). These results show that pelletized PHB beads can be used for the immobilization of lipases, with the advantage that pelletized PHB will perform better than PHB powder in large-scale enzyme bioreactors.
Asunto(s)
Hidroxibutiratos , Lipasa , Emulsiones , Poliésteres , Porosidad , Polvos , SolventesRESUMEN
Due to increased environmental pressures, significant research has focused on finding suitable biodegradable plastics to replace ubiquitous petrochemical-derived polymers. Polyhydroxyalkanoates (PHAs) are a class of polymers that can be synthesized by microorganisms and are biodegradable, making them suitable candidates. The present study looks at the degradation properties of two PHA polymers: polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-polyhydroxyvalerate (PHBV; 8 wt.% valerate), in two different soil conditions: soil fully saturated with water (100% relative humidity, RH) and soil with 40% RH. The degradation was evaluated by observing the changes in appearance, chemical signatures, mechanical properties, and molecular weight of samples. Both PHB and PHBV were degraded completely after two weeks in 100% RH soil conditions and showed significant reductions in mechanical properties after just three days. The samples in 40% RH soil, however, showed minimal changes in mechanical properties, melting temperatures/crystallinity, and molecular weight over six weeks. By observing the degradation behavior for different soil conditions, these results can pave the way for identifying situations where the current use of plastics can be replaced with biodegradable alternatives.