RESUMEN
Ni-rich layered oxides as high-capacity battery cathodes suffer from degradation at high voltages. We utilize a dry surface modification method, mechanofusion (MF), to achieve enhanced battery stability. The simplicity, high yield, and flexibility make it cost-effective and highly attractive for processing at the industrial scale. The underlying mechanisms responsible for performance improvement are unveiled by a systematic study combining multiple probes, e.g., 3D nano-tomography, spectroscopic imaging, in situ synchrotron diffraction, and finite element analysis (FEA). MF affects the bulk crystallography by introducing partially disordered structure, microstrain, and local lattice variation. Furthermore, the crack initiation and propagation pattern during delithiation are regulated and the overall mechanical fracture is reduced after such surface coating. We validate that MF can alter the bulk charging pathways. Such a synergic effect between surface modification and bulk charge distribution is fundamentally important for designing next-generation battery cathode materials.
RESUMEN
In humans, the growth pattern of the acellular extrinsic fibre cementum (AEFC) has been useful to estimate the age-at-death. However, the structural organization behind such a pattern remains poorly understood. In this study tooth cementum from seven individuals from a Mexican modern skeletal series were analyzed with the aim of unveiling the AEFC collagenous and mineral structure using multimodal imaging approaches. The organization of collagen fibres was first determined using: light microscopy, transmission electron microscopy (TEM), electron tomography, and plasma FIB scanning electron microscopy (PFIB-SEM) tomography. The mineral properties were then investigated using: synchrotron small-angle X-ray scattering (SAXS) for T-parameter (correlation length between mineral particles); synchrotron X-ray diffraction (XRD) for L-parameter (mineral crystalline domain size estimation), alignment parameter (crystals preferred orientation) and lattice parameters a and c; as well as synchrotron X-ray fluorescence for spatial distribution of calcium, phosphorus and zinc. Results show that Sharpey's fibres branched out fibres that cover and uncover other collagen bundles forming aligned arched structures that are joined by these same fibres but in a parallel fashion. The parallel fibres are not set as a continuum on the same plane and when they are superimposed project the AEFC incremental lines due to the collagen birefringence. The orientation of the apatite crystallites is subject to the arrangement of the collagen fibres, and the obtained parameter values along with the elemental distribution maps, revealed this mineral tissue as relatively homogeneous. Therefore, no intrinsic characteristics of the mineral phase could be associated with the alternating AEFC incremental pattern.
Asunto(s)
Cemento Dental , Minerales , Difracción de Rayos X , Humanos , Cemento Dental/ultraestructura , Cemento Dental/química , Cemento Dental/metabolismo , Difracción de Rayos X/métodos , Minerales/metabolismo , Minerales/química , Colágeno/química , Colágeno/metabolismo , Microscopía Electrónica de Transmisión/métodos , Dispersión del Ángulo Pequeño , Microscopía Electrónica de Rastreo/métodos , Tomografía con Microscopio Electrónico/métodos , Femenino , Adulto , Masculino , Persona de Mediana EdadRESUMEN
Li-rich Mn-based cathodes have been regarded as promising cathodes for lithium-ion batteries because of their low cost of raw materials (compared with Ni-rich layer structure and LiCoO2 cathodes) and high energy density. However, for practical application, it needs to solve the great drawbacks of Li-rich Mn-based cathodes like capacity degradation and operating voltage decline. Herein, an effective method of surface modification by benzene diazonium salts to build a stable interface between the cathode materials and the electrolyte is proposed. The cathodes after modification exhibit excellent cycling performance (the retention of specific capacity is 84.2% after 350 cycles at the current density of 1 C), which is mainly attributed to the better stability of the structure and interface. This work provides a novel way to design the coating layer with benzene diazonium salts for enhancing the structural stability under high voltage condition during cycling.
RESUMEN
Profiting from the unique atomic laminated structure, metallic conductivity, and superior mechanical properties, transition metal carbides and nitrides named MAX phases have shown great potential as anodes in lithium-ion batteries. However, the complexity of MAX configurations poses a challenge. To accelerate such application, a minus integrated crystal orbital Hamilton populations descriptor is innovatively proposed to rapidly evaluate the lithium storage potential of various MAX, along with density functional theory computations. It confirms that surface A-element atoms bound to lithium ions have odds of escaping from MAX. Interestingly, the activated A-element atoms enhance the reversible uptake of lithium ions by MAX anodes through an efficient alloying reaction. As an experimental verification, the charge compensation and SnxLiy phase evolution of designed Zr2SnC MAX with optimized structure is visualized via in situ synchrotron radiation XRD and XAFS technique, which further clarifies the theoretically expected intercalation/alloying hybrid storage mechanism. Notably, Zr2SnC electrodes achieve remarkably 219.8% negative capacity attenuation over 3200 cycles at 1 A g-1. In principle, this work provides a reference for the design and development of advanced MAX electrodes, which is essential to explore diversified applications of the MAX family in specific energy fields.
RESUMEN
2D transitional metal selenide heterostructures are promising electrode materials for potassium-ion batteries (PIBs) owing to the large surface area, high mechanical strength, and short diffusion pathways. However, the cycling performance remains a significant challenge, particularly concerning the electrochemical conversion reaction. Herein, 2D Se-rich ZnSe/CoSe2@C heterostructured composite is fabricated via a convenient hydrothermal approach followed by selenization process, and then applied as high-performance anodes for PIBs. For example, the capacity delivered by the heterostructured composite is mainly contributed to the synergistic effect of conversion and alloy/de-alloy processes aroused by K+, where K+ may highly insert or de-insert into Se-rich ZnSe/CoSe2@C. The obtained electrode delivers an outstanding reversible charge capacity of 214 mA h g-1 at 1 A g-1 after 4000 cycles for PIBs, and achieves 262 mAh g-1 when coupled with a PTCDA cathode in the full cell. The electrochemical conversion mechanism of the optimized electrode during cycling is investigated through in situ XRD, Raman, and ex situ HRTEM. In addition, the heterostructured composite as anodes also displays excellent electrochemical performances for sodium-ion batteries (SIBs) and lithium-ion batteries (LIBs). This work opens up a new window for investigating novel electrode materials with excellent capacity and long durability.
RESUMEN
Bimetallic metal-organic frameworks (MOFs) are promising nanomaterials whose reactivity towards biomolecules remains challenging due to issues related to synthesis, stability, control over metal oxidation state, phase purity, and atomic level characterization. Here, these shortcomings are rationally addressed through development of a synthesis of mixed metal Zr/Ce-MOFs in aqueous environment, overcoming significant hurdles in the development of MOF nanozymes, sufficiently stable on biologically relevant conditions. Specifically, a green and safe synthesis of Zr/Ce-MOF-808 is reported in water/acetic acid mixture which affords remarkably water-stable materials with reliable nanozymatic reactivity, including MOFs with a high Ce content previously reported to be unstable in water. The new materials outperform analogous bimetallic MOF nanozymes, showcasing that rational synthesis modifications could impart outstanding improvements. Further, atomic-level characterization by X-ray Absorption Fine Structure (XAFS) and X-ray Diffraction (XRD) confirmed superior nanozymes arise from differences in the synthetic method, which results in aqueous stable materials, and Ce incorporation, which perturbs the ligand exchange dynamics of the material, and could ultimately be used to fine tune the intrinsic MOF reactivity. Similar rational strategies which leverage metals in a synergistic manner should enable other water-stable bimetallic MOF nanozymes able to surpass existing ones, laying the path for varied biotechnological applications.
Asunto(s)
Estructuras Metalorgánicas , Nanoestructuras , Ácido Acético , Biotecnología , AguaRESUMEN
Transition metal selenides (TMSs) are receiving considerable interest as improved anode materials for sodium-ion batteries (SIBs) and lithium-ion batteries (LIBs) due to their considerable theoretical capacity and excellent redox reversibility. Herein, ZIF-12 (zeolitic imidazolate framework) structure is used for the synthesis of Cu2Se/Co3Se4@NPC anode material by pyrolysis of ZIF-12/Se mixture. When Cu2Se/Co3Se4@NPC composite is utilized as an anode electrode material in LIB and SIB half cells, the material demonstrates excellent electrochemical performance and remarkable cycle stability with retaining high capacities. In LIB and SIB half cells, the Cu2Se/Co3Se4@NPC anode material shows the ultralong lifespan at 2000 mAg-1, retaining a capacity of 543 mAhg-1 after 750 cycles, and retaining a capacity of 251 mAhg-1 after 200 cycles at 100 mAg-1, respectively. The porous structure of the Cu2Se/Co3Se4@NPC anode material can not only effectively tolerate the volume expansion of the electrode during discharging and charging, but also facilitate the penetration of electrolyte and efficiently prevents the clustering of active particles. In situ X-ray difraction (XRD) analysis results reveal the high potential of Cu2Se/Co3Se4@NPC composite in building efficient LIBs and SIBs due to reversible conversion reactions of Cu2Se/Co3Se4@NPC for lithium-ion and sodium-ion storage.
RESUMEN
The in situ measurement technique for a metal/metal-oxide mixture at extra-high temperature above 2000â K has been desired in the field of nuclear safety engineering. In the present study, we succeeded in simultaneous XAFS-XRD measurements of the Zr oxidation [Zr + O â Zr(O) + ZrO2] up to 1952â K and ZrO2-Y2O3 reaction from 1952 to 2519â K. The chemical shift during Zr oxidation was observed in the absorption spectra around the Zr K-edge, and the interatomic cation-cation and cation-oxygen distances obtained by the fitting analysis of EXAFS during the Y2O3-ZrO2 reaction are explained. Also, the temperature dependency of the anharmonic effect was investigated by comparing the fitted second- and third-order cumulants with the theoretical ones in which the Morse potential was applied as an interatomic potential, giving a good explanation about the local structure dynamics. Finally, the applicability of the developed system to investigation of nuclear fuel materials, such as UO2-Zr, is discussed.
RESUMEN
Sodium/potassium-ion batteries (NIBs and KIBs) are considered the most promising candidates for lithium-ion batteries in energy storage fields. Tin sulfide (SnS2) is regarded as an attractive negative candidate for NIBs and KIBs thanks to its superior power density, high-rate performance and natural richness. Nevertheless, the slow dynamics, the enormous volume change and the decomposition of polysulfide intermediates limit its practical application. Herein, microcubes SnS2 were prepared through sacrificial MnCO3 template-assisted and a facile solvothermal reaction strategy and their performance was investigated in Na and K-based cells. The unique hollow cubic structure and well-confined SnS2 nanosheets play an important role in Na+/K+ rapid kinetic and alleviating volume change. The effect of the carbon additives (Super P/C65) on the electrochemical properties were investigated thoroughly. The in operando and ex-situ characterization provide a piece of direct evidence to clarify the storage mechanism of such conversion-alloying type negative electrode materials.
RESUMEN
The synthesis and extensive characterization of nine aryl sulfur diimides (SDIs, Ar-NSN-Ar) are presented with a robust computational and experimental investigation of the fundamental properties of these important members of the thiazyl family of compounds, with particular attention paid to their highly tunable electrochemical behaviour. This is the first work to undertake a systematic comparison of the electrochemical profiles of a coherent series of SDIs to demonstrate and quantify the response of their reduction potentials to substituent electron-donating and -withdrawing properties. This effect is found to be not only exceptionally strong, but also correlates very closely with computed orbital energies. Electron paramagnetic resonance spectroscopy is used to determine the nature, localization, and qualitative lifetimes of the radical anions of SDIs. This work also addresses significant misconceptions about physical properties of SDIs. Experimental data and modern computational methods are employed to provide a resolute answer to the long-standing contention of the solution-state conformations of SDIs, and to correct historical mistakes in the assignment of infrared spectroscopic data. High-quality crystal structures of all SDIs in this work showcase the utility of the recently introduced structural refinement software NoSpherA2, enabling full anisotropic refinement of H-atoms with accurate C-H bond lengths.
RESUMEN
Sodium-oxygen batteries have been regarded as promising energy storage devices due to their low overpotential and high energy density. Its applications, however, still face formidable challenges due to the lack of understanding about the influence of electrocatalysts on the discharge products. Here, a phosphorous and nitrogen dual-doped carbon (PNDC) based cathode is synthesized to increase the electrocatalytic activity and to stabilize the NaO2 superoxide nanoparticle discharge products, leading to enhanced cycling stability when compared to the nitrogen-doped carbon (NDC). The PNDC air cathode exhibits a low overpotential (0.36 V) and long cycling stability (120 cycles). The reversible formation/decomposition and stabilization of the NaO2 discharge products are clearly proven by in-situ synchrotron X-ray diffraction and ex-situ X-ray diffraction. Based on the density functional theory calculation, the PNDC has much stronger adsorption energy (-2.85 eV) for NaO2 than that of NDC (-1.80 eV), which could efficiently stabilize the NaO2 discharge products.
RESUMEN
We present structural properties at different temperatures and high-pressure (HP) of La3Rh4Sn13 which is one of the interesting systems in the Remika phase RE3Rh4Sn13 (RE=Sr, Ca, La, Pr, Ce) quasi-skutterudite series using synchrotron diffraction. Data at ambient conditions revealed the presence of several weak reflections, which could be accounted only with a superlattice I* structure (I4132) with lattice parameter a~19.457â Å. However, above 350â K, a complete suppression of the weak superlattice reflections of the I* structure is observed. Data at higher temperatures is found to be well described by the I structure (Pm-3n) having half the lattice parameter compared to the I* structure. HP-XRPD at ambient temperature showed that pressures greater than 7.5â GPa result in similar suppression of the weak I* superlattice reflections. Data at higher pressures is found to be well described by the I structure (Pm-3n), similar to the high-temperature phase. HP Raman measurements demonstrated changes that seem to be consistent with a locally more ordered structure as in the case of the I*âI transition. Our findings on La3Rh4Sn13 open up new avenues to study unexplored HP phenomena, especially the superconductivity in these Remika phase quasi-skutterudites.
RESUMEN
X-ray diffraction (XRD) is an analytical technique that has found several applications focusing on the identification of crystal structure, space groups, plane, and orientation, in addition to qualitative and quantitative phase identification, and polymorphism behavior. An XRD diffractogram pattern/Bragg's peak can also provide valuable information that can be used for various food applications. While this review details the fundamental principles of XRD, the types of XRD systems, instrumentation, and the components thereof, the focus is to serve as a structured resource on explored applications of XRD in food, majorly revolving around food quality and safety. While recent studies relevant to the field are highlighted, leads for futuristic prospects are presented. With its unique approach, the XRD analysis can prove to be a rapid, robust, and sensitive nondestructive approach to food quality evaluation. Recent reports indicate its scope for nonconventional applications such as the assessment of 3D printability of foods, ice crystal formation, and screening food adulterants. Studies also highlight its scope to complement or replace conventional food quality testing approaches that involve the usage of chemicals, extensive sample preparation procedures, derivatization steps and demand long testing times.
RESUMEN
Metal organic frameworks (MOF's) have gained considerable attention in the field of energy storage and supercapacitors applications. Herein, we synthesized copper oxide (CuO) through the precipitation method and concurrently derived from the solvothermal prepared copper-benzene dicarboxylate (Cu-BDC) by calcination. The integration of MOF-derived nanostructures with traditional CuO to form a hybrid electrode material, has not been extensively explored. The synthesized materials were characterized using x-ray Diffractometry, FTIR, XPS, Brunauer, Emmett, and Teller and morphological analysis was conducted using scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) affirming the composite's nature. Electrochemical impedance spectroscopy, galvanostatic charge-discharge, and cyclic voltammetry were used to evaluate the electrochemical properties of electrode material. With a specific capacitance of 691 Fg-1for CuO obtained from Cu-BDC (benzene dicarboxylic acid) and 236 Fg-1for CuO via the precipitation method, measured at a scan rate of 5 m Vs-1in 6 M KOH was found to be the optimal performance solution for the electrode material. The mesoporous structures are crucial for their absorption ability and improved ion transport, resulting in optimized electrochemical performance. Finally, we demonstrate significant improvements in specific capacitance and cycling stability compared to pure CuO-based electrodes, highlighting the potential of this composite structure for advanced supercapacitor applications.
RESUMEN
In this work, we investigate how the structural and optical characteristics of ZrO2 and Na2ZrO3 are influenced by Sm3+ ion doping. Urea-assisted combustion approach is employed by varying the molar concentration of Sm3+ ions in both the host lattices. XRD pattern revealed the monoclinic crystal system for both samples. XPS investigation has been examined to acquire the chemical information of the samples. FESEM is used to identify the morphology of the samples. The optimum molar concentrations of Sm3+ doped ZrO2 and Na2ZrO3 phosphors, as per photoluminescence (PL) findings, are 1.5 mol% and 2 mol%, respectively. CIE coordinates of ZrO2:Sm3+ and Na2ZrO3:Sm3+ are found to be (x = 0.59, y = 0.41) and (x = 0.61, y = 0.39) that corresponds to the amber region of color gamut. The optical bandgap for the synthesized samples is estimated using the UV-Vis diffuse reflectance spectra and the obtained values for the optimal concentration of dopant (Sm3+) in the ZrO2 and Na2ZrO3 samples are 4.61 and 4.94 eV, respectively. The findings of the study reveal that the synthesized phosphors may be utilized as warm light phosphors and be a promising candidate for amber light-emitting diodes (LEDs).
RESUMEN
This study investigates the synthesis and characterization of KSrVO4 phosphors doped with Er3+ ions using combustion synthesis route by using urea as a fuel. X-ray diffraction analysis confirmed the orthorhombic phase and nano-scale crystallite size of around 21 nm, while transmission electron microscopy showed spherical and rod-shaped morphologies. The studies detected upconversion emission spectra at 526, 542 and 643 nm, representing green and red transitions under 980 nm excitation. Downshifting emissions under 350 nm excitation revealed peaks at 492, 544 and 680 nm. The critical quenching concentration was 2.5 mol%, resulting from dipole-quadrupole interactions among dopant ions. The direct and indirect optical band gaps were calculated as 3.61 and 3.41 eV, respectively. The calculated chromaticity coordinates and color correlated temperature values of the phosphor surpassed 5000 K, suggesting its viability for cool LED applications. These findings emphasize KSrVO4:Er3+ as a promising greenish component in white LEDs and a potent upconverting luminescence material for bio-imaging and photovoltaics.
RESUMEN
In the current study, the co-precipitation technique was employed for the synthesis of Cadmium oxide (CdO) and Copperâdoped Cadmium oxide (CuâCdO) nanoparticles. The synthesized samples were subjected to powder X-Ray diffraction (P-XRD), Field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray (EDX), Fourier transforms Infrared (FT-IR), UV-Vis spectroscopy, photoluminescence (PL), laser-induced fluorescence spectroscopy and antibacterial investigations. According to the P-XRD analysis, both the samples were simple cubic in structure and have average grain sizes of 54 and 28 nm, respectively. FE-SEM was deployed to explore the surface textures of the samples. EDX technique was used to look at the elemental compositions of the samples. The technique of FT-IR was employed to identify the vibrational modes. UV-Vis spectra in diffuse reflectance mode were obtained and the optical bandgaps of the CdO and CuâCdO samples were obtained as 4.52 eV and 2.83 eV, respectively. The photoluminescence studies were conducted at an excitation wavelength of 300 nm and emission peaks were red-shifted in both samples. Fluorescence spectroscopy was applied to explore the lifetimes of synthesized nanoparticles. The technique of Agar-well diffusion was applied to assess the antibacterial performance of the generated nanoparticles against Micrococcus Luteus (gram-positive) and Escherichia coli (gram-negative) bacterium at variable concentrations. Both samples in the current study are significantly effective against both bacterial strains.
RESUMEN
Organic semiconductors find widespread applications in the realm of organic light-emitting diodes (OLEDs) as well as organic photovoltaic cells. In the domain of OLED devices, it is plausible for nano-based Mg metal complexes to play a role as electron and hole-transport layers. In the present investigation, we synthesized 2(2-methyl 8-hydroxyquinoline) magnesium [Mg(mq)2] nanorods through the employment of the precipitation method, using 2-methyl 8- hydroxyquinoline and magnesium acetate. We employed various techniques to characterize the Mg(mq)2 nanorods, including powder XRD, FTIR spectroscopy, SEM, EDX, UV-Vis, and PL spectroscopy studies. The structural aspects of Mg(mq)2 were ascertained through P-XRD analysis. The elemental composition of Mg(mq)2 and its surface texture were established via EDX and HR-SEM analyses. FTIR spectroscopy confirmed the existence of functional groups within the sample. UV-Vis spectroscopy was utilized to evaluate the optical absorbance, bandgap, and Urbach energy of Mg(mq)2. The luminescence properties of the Mg(mq)2 nanorods were determined from the photoluminescence study. The characterization results were compared with the Zn(mq)2 nano samples. The experimental results presented herein serve to demonstrate the practicality of employing Mg(mq)2 nanorods in OLED devices.
RESUMEN
Pedalium Murex leaf extract was used in this study to create Nickel-doped Cerium oxide (Ni-CeO2) nanoparticles at 3 mol% and 5 mol% molar concentrations. The biosynthesized process was applied for the fabrication of Ni-CeO2 NPs. The X-ray diffraction method was used to identify their crystal structure. The XRD measurements showed that the Ni-CeO2 NPs crystallized into the face-centred cubic system. Fourier transform infrared spectral study was applied to explore the molecular vibrations and chemical bonding. The surface texture and chemical ingredients of Ni-CeO2 NPs were studied using field-emission scanning electron microscopy and energy-dispersive X-ray analysis. The EDX mapping spectra illustrate the uniform dispersal of Ce, Ni, and O atoms over the sample's surface. X-ray photoelectron spectroscopy (XPS) was conducted to confirm the chemical state of the Ni-CeO2 NPs. UV-Vis spectrum study was performed to ascertain the photon absorption, bandgap, and Urbach edge of Ni-CeO2 NPs. Photoluminescence (PL) research has been used to study the light-emitting characteristic of Ni-CeO2 NPs. The emissive intensity transition corresponding to Ni-CeO2 NPs was found to increase with the dopant level. The CIE 1931 chromaticity map was plotted to find the aptness of the samples for optical uses. The antifungal ability of Ni-CeO2 NPs was evaluated against the fungi candida albicans and candida krusein with the agar well-diffusion process. The fungicidal activity of the 3 mol% Ni doped CeO2 nanoparticles has shown a maximum zone of inhibition. The experimental findings illustrate the utility of Ni-CeO2 NPs for optical and antifungal applications.
RESUMEN
The combustion procedure was used to synthesize Bi2Al4O9:Eu3+ phosphors. The XRD and photoluminescence properties are investigations. The XRD patterns consist of an orthorhombic crystal structure. At 395 nm, the maximum excitation intensity was obtained. Following 395 nm excitation, two different emission peaks at 593 and 615 nm were observed. Concentration quenching occurred at 0.5 mol % Eu3+ ions. The CIE coordinates for the Bi2Al4O9 phosphor with Eu3+ ion doped are 615 nm (x = 0.680, y = 0.319) falling in the red region. According to the photoluminescence results, Bi2Al4O9:Eu3+ phosphors might be useful in the fields of near UV-excited w-LEDs.