Carbon disulfide: A redox mediator for organodisulfides in redox flow batteries.

Organodisulfides (RSSR) are a class of promising active materials for redox flow batteries (RFBs). However, their sluggish kinetics and poor cyclic stability remain a formidable challenge. Here, we propose carbon disulfide (CS2) as a unique redox mediator involving reversible C-S bond formation/breakage to facilitate the reduction reaction of organodisulfides in RFBs. In the discharge of RSSR, CS2 interacts with the negatively charged RSSR-• to promote cleavage of the S-S bond by reducing about one-third of the energy barrier, forming RSCS2Li. In the recharge, CS2 is unbonded from RSCS2Li while RSSR is regenerated. Meanwhile, the redox mediator can also be inserted into the molecular structure of RSSR to form RSCS2SR/RSCS2CS2SR, and these new active materials with lower energy barriers can further accelerate the reaction kinetics of RSSR. With CS2, phenyl disulfide exhibits an exceptional rate capability and cyclability of 500 cycles. An average energy efficiency of >90% is achieved. This strategy provides a unique redox-mediating pathway involving C-S bond formation/breakage with the active species, which is different from those used in lithium-oxygen or other batteries.

Urchin-Like Mesoporous TiN Hollow Sphere Enabling Promoted Electrochemical Kinetics of Bromine-Based Flow Batteries.

Bromine-based flow batteries (BFB) have always suffered from poor kinetics due to the sluggish Br3 -/Br- redox, hindering their practical applications. Developing cathode materials with high catalytic activity is critical to address this challenge. Herein, the in-depth investigation for the free energy of the bromine redox electrode is conducted initially through DFT calculations, establishing the posterior desorption during oxidation as the rate-determining step. An urchin-like titanium nitride hollow sphere (TNHS) composite is designed and synthesized as the catalyst for bromine redox. The large difference in Br- and Br3 - adsorption capability of TNHS promotes rapid desorption of generated Br3 - during the oxidation process, liberating active sites timely to enable smooth ongoing reactions. Besides, the urchin-like microporous/mesoporous structure of TNHS provides abundant active surface for bromine redox reactions, and ample cavities for the bromine accommodation. The inherently high conductivity of TNHS enables facile electron transfer through multiple channels. Consequently, zinc-bromide flow batteries with TNHS catalyst exhibit significantly enhanced kinetics, stably operating at 80 mA cm-2 with 82.78% energy efficiency. Overall, this study offers a solving strategy and catalyst design approach to the sluggish kinetics that has plagued bromine-based flow batteries.

Scanning Electrochemical Microscopy Meets Optical Microscopy: Probing the Local Paths of Charge Transfer Operando in Booster-Microparticles for Flow Batteries.

Understanding the oxidation/reduction dynamics of secondary microparticles formed from agglomerated nanoscale primary particles is crucial for advancing electrochemical energy storage technologies. In this study, the behavior of individual copper hexacyanoferrate (CuHCF) microparticles is explored at both global and local scales combining scanning electrochemical microscopy (SECM), for electrochemical interrogation of a single, but global-scale microparticle, and optical microscopy monitoring to obtain a higher resolution dynamic image of the local electrochemistry within the same particle. Chronoamperometric experiments unveil a multistep oxidation/reduction process with varying dynamics. On the one hand, the global SECM analysis enables quantifying the charge transfer as well as its dynamics at the single microparticle level during the oxidation/reduction cycles by a redox mediator in solution. These conditions allow mimicking the charge storage processes in these particles when they are used as solid boosters in redox flow batteries. On the other hand, optical imaging with sub-particle resolution allows the mapping of local conversion rates and state-of-charge within individual CuHCF particles. These maps reveal that regions of different material loadings exhibit varying charge storage capacities and conversion rates. The findings highlight the significance of porous nanostructures and provide valuable insights for designing more efficient energy storage materials.

Advanced Electrolyte Formula for Robust Operation of Vanadium Redox Flow Batteries at Elevated Temperatures.

Insufficient thermal stability of vanadium redox flow battery (VRFB) electrolytes at elevated temperatures (>40 °C) remains a challenge in the development and commercialization of this technology, which otherwise presents a broad range of technological advantages for the long-term storage of intermittent renewable energy. Herein, a new concept of combined additives is presented, which significantly increases thermal stability of the battery, enabling safe operation to the highest temperature (50 °C) tested to date. This is achieved by combining two chemically distinct additives-inorganic ammonium phosphate and polyvinylpyrrolidone (PVP) surfactant, which collectively decelerate both protonation and agglomeration of the oxo-vanadium species in solution and thereby significantly suppress detrimental formation of precipitates. Specifically, the precipitation rate is reduced by nearly 75% under static conditions at 50° C. This improvement is reflected in the robust operation of a complete VRFB device for over 300 h of continuous operation at 50 °C, achieving an impressive 83% voltage efficiency at 100 mA cm‒2 current density, with no precipitation detected in either the electrode/flow-frame or electrolyte tank.

Exploration of Vitamin B6-Based Redox-Active Pyridinium Salts Towards the Application in Aqueous Organic Flow Batteries.

Pyridoxal hydrochloride, a vitamin B6 vitamer, was synthetically converted to a series of diverse redox-active benzoyl pyridinium salts. Cyclic voltammetry studies demonstrated redox reversibility under basic conditions, and two of the most promising salts were subjected to laboratory-scale flow battery tests involving galvanostatic cycling at 10 mM in 0.1 M NaOH. In these tests, the battery was charged completely, corresponding to the transfer of two electrons to the electrolyte, but no discharge was observed. Both CV analysis and electrochemical simulations confirmed that the redox wave observed in the experimental voltammograms corresponds to a two-electron process. To explain the irreversibility in the battery tests, we conducted bulk electrolysis with the benzoyl pyridinium salts, affording the corresponding benzylic secondary alcohols. Computational studies suggest that the reduction proceeds in three consecutive steps: first electron transfer (ET), then proton-coupled electron transfer (PCET) and finally proton transfer (PT) to give the secondary alcohol. 1H NMR deuterium exchange studies indicated that the last PT step is not reversible in 0.1 M NaOH, rendering the entire redox process irreversible. The apparent reversibility observed in CV at the basic media likely arises from the slow rate of the PT step at the timescale of the measurement.

Recent Developments on Electroactive Organic Electrolytes for Non-Aqueous Redox Flow Batteries: Current Status, Challenges, and Prospects.

The ever-increasing threat of climate change and the depletion of fossil fuel resources necessitate the use of solar- and wind-based renewable energy sources. Large-scale energy storage technologies, such as redox flow batteries (RFBs), offer a continuous supply of energy. Depending on the nature of the electrolytes used, RFBs are broadly categorized into aqueous redox flow batteries (ARFBs) and non-aqueous redox flow batteries (NARFBs). ARFBs suffer from various problems, including low conductivity of electrolytes, inferior charge/discharge current densities, high-capacity fading, and lower energy densities. NARFBs offer a wider potential window and range of operating temperatures, faster electron transfer kinetics, and higher energy densities. In this review article, a critical analysis is provided on the design of organic electroactive molecules, their physiochemical/electrochemical properties, and various organic solvents used in NARFBs. Furthermore, various redox-active organic materials, such as metal-based coordination complexes, quinones, radicals, polymers, and miscellaneous electroactive species, explored for NARFBs during 2012-2023 are discussed. Finally, the current challenges and prospects of NARFBs are summarized.

Development of Membranes and Separators to Inhibit Cross-Shuttling of Sulfur in Polysulfide-Based Redox Flow Batteries: A Review.

The global rapid transition from fossil fuels to renewable energy resources necessitates the implementation of long-duration energy storage technologies owing to the intermittent nature of renewable energy sources. Therefore, the deployment of grid-scale energy storage systems is inevitable. Sulfur-based batteries can be exploited as excellent energy storage devices owing to their intrinsic safety, low cost of raw materials, low risk of environmental hazards, and highest theoretical capacities (gravimetric: 2600 Wh/kg and volumetric: 2800 Wh/L). However, sulfur-based batteries exhibit certain scientific limitations, such as polysulfide crossover, which causes rapid capacity decay and low Coulombic efficiency, thereby hindering their implementation at a commercial scale. In this review article, we focus on the latest research developments between 2012-2023 to improve the separators/membranes and overcome the shuttle effect associated with them. Various categories of ion exchange membranes (IEMs) used in redox batteries, particularly polysulfide redox flow batteries and lithium-sulfur batteries, are discussed in detail. Furthermore, advances in IEM constituents are summarized to gain insights into different fundamental strategies for attaining targeted characteristics, and a critical analysis is proposed to highlight their efficiency in mitigating sulfur cross-shuttling issues. Finally, future prospects and recommendations are suggested for future research toward the fabrication of more effective membranes with desired properties.

Supramolecular Modifying Nafion with Fluoroalkyl­Functionalized Polyoxometalate Nanoclusters for High­Selective Proton Conduction.

Fluoroalkyl-grafted polyoxometalate nanoclusters are used as supramolecular additives to precisely modify the ionic domains of Nafion, which can increase the proton conductivity and selectivity simultaneously. The resulting hybrid membranes show significantly enhanced power density in fuel cells and improved energy efficiency in vanadium flow batteries.

High Ion Conductive and Selective Membrane Achieved through Dual Ion Conducting Mechanisms.

Conventional ion-selective membranes, that is ion-exchange and porous membranes, are unable to perform high conductivity and selectivity simultaneously due to the contradictions between their ion selecting and conducting mechanisms. In this work, a bifunctional ion-selective layer is developed via the combination of nanoporous boron nitride (PBN) and ion exchange groups from Nafion to achieve high ion conductivity through dual ion conducting mechanisms as well as high ion selectivity. A template-free method is adopted to synthesize flake-like PBN, which is further enmeshed with Nafion resin to form the bifunctional layer coated onto a porous polyetherimide membrane. The double-layer membrane exhibits excellent ion selectivity (1.49 × 108 mS cm-3  min), which is 22 times greater than that of the pristine porous polyetherimide membrane, with outstanding ion conductivity (64 mS cm-1 ). In a vanadium flow battery, the double-layer membrane achieves a high Coulombic efficiency of 97% and outstanding energy efficiency of 91% at 40 mA cm-2 with a stable cycling performance for over 700 cycles at 100 mA cm-2 . PBN with ion exchange groups may therefore offer a potential solution to the limitation between ion selectivity and conductivity in ion-selective membranes.

Homogenizing Zn Deposition in Hierarchical Nanoporous Cu for a High-Current, High Areal-Capacity Zn Flow Battery.

A Zn anode can offset the low energy density of a flow battery for a balanced approach toward electricity storage. Yet, when targeting inexpensive, long-duration storage, the battery demands a thick Zn deposit in a porous framework, whose heterogeneity triggers frequent dendrite formation and jeopardizes the stability of the battery. Here, Cu foam is transferred into a hierarchical nanoporous electrode to homogenize the deposition. It begins with alloying the foam with Zn to form Cu5 Zn8 , whose depth is controlled to retain the large pores for a hydraulic permeability ≈10-11  m2 . Dealloying follows to create nanoscale pores and abundant fine pits below 10 nm, where Zn can nucleate preferentially due to the Gibbs-Thomson effect, as supported by a density functional theory simulation. Morphological evolution monitored by in situ microscopy confirms uniform Zn deposition. The electrode delivers 200 h of stable cycles in a Zn-I2 flow battery at 60 mAh cm-2 and 60 mA cm-2 , performance that meets practical demands.

Titanium Nitride Nanorods Array-Decorated Graphite Felt as Highly Efficient Negative Electrode for Iron-Chromium Redox Flow Battery.

Iron-chromium redox flow batteries have attracted widespread attention because of their low cost. However, the performance of these batteries is still lower than that of vanadium redox flow batteries due to the poor electrochemical activity of Cr3+ /Cr2+ redox couples on graphite felt electrodes. Herein, binder-free TiN nanorods array-decorated 3D graphite felt composite electrode-is demonstrated. The dendrite-like TiN nanorods array increases the specific surface area of the electrode. The nitrogen and oxygen elements on the surface provide more adsorption sites and electrochemically active sites for Cr3+ /Cr2+ . The contact resistance of the composite electrode is effectively reduced and its homogeneity and stability are improved by avoiding the use of a binder and mixing process. A battery prepared using the TiN nanorods array-decorated 3D graphite felt electrode has enabled the maximum power density to be 427 mW·cm-2 , which is 74.0% higher than a battery assembled with TiN nanoparticles bonded to graphite felt. At a current density of 80 mA·cm-2 , the TiN nanorods battery exhibits the highest coulombic efficiency of 93.0%, voltage efficiency of 90.4%, and energy efficiency of 84.1%. Moreover, the battery efficiency and composite electrode structure remains stable during a redox flow battery cycle test.

A Mesoporous Tungsten Oxynitride Nanofibers/Graphite Felt Composite Electrode with High Catalytic Activity for the Cathode in Zn-Br Flow Battery.

High electrochemical polarization during a redox reaction in the electrode of aqueous zinc-bromine flow batteries largely limits its practical implementation as an effective energy storage system. This study demonstrates a rationally-designed composite electrode that exhibits a lower electrochemical polarization by providing a higher number of catalytically-active sites for faster bromine reaction, compared to a conventional graphite felt cathode. The composite electrode is composed of electrically-conductive graphite felt (GF) and highly active mesoporous tungsten oxynitride nanofibers (mWONNFs) that are prepared by electrospinning and simple heat treatments. Addition of the 1D mWONNFs to porous GF produces a web-like structure that significantly facilitates the reaction kinetics and ion diffusion. The cell performance achieves in this study demonstrated high energy efficiencies of 89% and 80% at current densities of 20 and 80 mA cm-2 , respectively. Furthermore, the cell can also be operated at a very high current density of 160 mA cm-2 , demonstrating an energy efficiency of 62%. These results demonstrate the effectiveness of the mWONNF/GF composite as the electrode material in zinc-bromine flow batteries.

N-Alkylated Pyridoxal Derivatives as Negative Electrolyte Materials for Aqueous Organic Flow Batteries: Computational Screening.

N-functionalized pyridinium frameworks derived from the three major vitamers of vitamin B6, pyridoxal, pyridoxamine and pyridoxine, have been screened computationally for consideration as negative electrode materials in aqueous organic flow batteries. A molecular database including the structure and the one-electron standard reduction potential of related pyridinium derivatives has been generated using a computational protocol that combines semiempirical and DFT quantum chemical methods. The predicted reduction potentials span a broad range for the investigated pyridinium frameworks, but pyridoxal derivatives, particularly those involving electron withdrawing substituents, have potentials compatible with the electrochemical stability window of aqueous electrolytes. The stability of radicals formed upon one-electron reduction has been analyzed by a new computational tool proposed recently for large-scale computational screening.

Benzidine Derivatives: A Class of High Redox Potential Molecules for Aqueous Organic Flow Batteries.

The development of water-soluble redox-active molecules with high potentials is one of the effective ways to enhance the energy density of aqueous organic flow batteries (AOFBs). Herein, a series of promising N-substituted benzidine analogues as water-soluble catholyte candidates with controllable redox potentials (0.78-1.01 V vs. standard hydrogen electrode (SHE)) were obtained by the molecular engineering of aqueous irreversible benzidines. Theoretical calculations reveal that the redox potentials of these benzidine derivatives in acidic solution are determined by their electronic structure and alkalinity. Among these benzidine derivatives, N,N,N',N'-tetraethylbenzidine(TEB) shows both high redox potential (0.82 V vs. SHE) and good solubility (1.1 M). Pairing with H4 [Si(W3 O10 )4 ] anolyte, the cell displayed discharge capacity retention of 99.4 % per cycle and a high coulombic efficiency (CE) of ∼100 % over 1200 cycles. The stable discharge capacity of 41.8 Ah L-1 was achieved at the 1.0 M TEB catholyte with a CE of 97.2 % and energy efficiency (EE) of 91.2 %, demonstrating that N-substituted benzidines could be promising for AOFBs.

Two-Dimensional MFI-Type Zeolite Flow Battery Membranes.

Vanadium flow battery (VFB) is one of the most reliable stationary electrochemical energy-storage technologies, and a membrane with high vanadium resistance and proton conductivity is essential for manufacturing high-performance VFBs. In this study, a two-dimensional (2D) MFI-type zeolite membrane was fabricated from zeolite nanosheet modules, which displayed excellent vanadium resistance (0.07 mmol L-1 h-1 ) and proton conductivity (0.16 S cm-1 ), yielding a coulombic efficiency of 93.9 %, a voltage efficiency of 87.6 %, and an energy efficiency of 82.3 % at 40 mA cm-2 . The self-discharge period of a VFB equipped with 2D MFI-type zeolite membrane increased up to 116.2 h, which was significantly longer than that of the commercial perfluorinated sulfonate membrane (45.9 h). Furthermore, the corresponding battery performance remained stable over 1000 cycles (>1500 h) at 80 mA cm-2 . These findings demonstrate that 2D MFI-type membranes are promising ion-conductive membranes applicable for stationary electrochemical energy-storage devices.

Stable Operation of Aqueous Organic Redox Flow Batteries in Air Atmosphere.

As a green route for large-scale energy storage, aqueous organic redox flow batteries (AORFBs) are attracting extensive attention. However, most of the reported AORFBs were operated in an inert atmosphere. Herein, we clarify this issue by using the reported AORFB (i.e., 3, 3'-(9,10-anthraquinone-diyl)bis(3-methylbutanoicacid) (DPivOHAQ)||Ferrocyanide) as an example. We demonstrate that the dissolved O2 can oxidize the discharged DPivOHAQ in anolyte, leading to capacity-imbalance between anolyte and catholyte. Therefore, this cell shows continuous capacity fading when operated in an air atmosphere. We propose a simple strategy for this challenge, in which the oxygen evolution reaction (OER) in catholyte is employed to balance oxygen reduction reaction (ORR) in anolyte. When using the Ni(OH)2 -modifed carbon felt (CF) as a current collector for catholyte, this cell shows an excellent stability in air atmosphere because the Ni(OH)2 -induced OER capacity in catholyte exactly balances the ORR capacity in anolyte. Such O2 -balance strategy facilitates AORFBs' practical application.

Simultaneous Regulation of Solvation Shell and Oriented Deposition toward a Highly Reversible Fe Anode for All-Iron Flow Batteries.

Developing low-cost all-iron hybrid redox flow batteries (RFBs) presents a practical alternative to the high-cost all-vanadium RFBs and is deemed vital for grid-scale energy storage applications. However, the intrinsically poor Fe anode reversibility associated with the deposition and dissolution of metallic iron greatly limits the cycling performance and long-term stability of all-iron hybrid RFBs. Herein, a highly reversible and dendrite-free Fe anode is reported for all-iron RFBs through regulation of polar solvent dimethyl sulfoxide (DMSO) on FeCl2 anolyte, which simultaneously reshapes Fe2+ solvation structure and induces controllable oriented Fe deposition. Combining both experimental and theoretical analyses, the polar DMSO additives prove effective in replacing H2 O molecule from the primary solvation shell of Fe2+ cation via the Fe2+ -O (DMSO) bond and meanwhile induces a fine-grained Fe nucleation on the preferred Fe (110) plane, which are responsible for the minimized hydrogen evolution and dendrite-free Fe deposition that significantly enhance Fe anode reversibility. The all-iron RFB based on the proposed FeCl2 -DMSO anolyte demonstrates an excellent combination of peak power density of 134 mW cm-2 , high energy efficiency of 75% at 30 mA cm-2 , and high capacity retention of 98.6% over 200 cycles, which presents the best performance of all-iron RFBs among previously reported research.

Bio-Derived and Cost-Effective Membranes with High Selectivity for Redox Flow Batteries Based on Host-Guest Chemistry.

Redox flow batteries (RFBs) stand out as a promising energy storage system to solve the grid interconnection problems of renewable energy. Membranes play a critical role in regulating the performance of RFBs, and the selectivity is commonly controlled via either size exclusion or Donnan exclusion. Membranes typically account for 40% of the stack cost of RFBs, and it is essential to develop cost-effective membranes with high selectivity to achieve widespread application. Here, a type of membrane composed of highly abundant materials derived in nature, based on a scalable fabrication process, is reported. Moreover, high selectivity is achieved attributed to the host-guest interactions between membranes and redox species, which effectively alleviate the crossover of redox-active molecules. By incorporating starch into a chitosan matrix for zinc-iodine RFBs, the highly selective recognition of starch and chitosan (host) toward triiodide (guest) builds a "wall" to block the triiodide-based active materials, meanwhile, the conducting properties of such a membrane are not compromised. The proof-of-concept battery delivers a Coulombic efficiency of 98.6% and energy efficiency of 77.4% at a current density of 80 mA cm-2 , showing the promise of such a novel and cost-effective membrane design beyond traditional selectivity chemistry.

Membrane Assemblies with Soft Protective Layers: Dense and Gel-Type Polybenzimidazole Membranes and Their Use in Vanadium Redox Flow Batteries.

Polybenzimidazole (PBI) membranes show excellent chemical stability and low vanadium crossover in vanadium redox flow batteries (VRFBs), but their high resistance is challenging. This work introduces a concept, membrane assemblies of a highly selective 2 µm thin PBI membrane between two 60 µm thick highly conductive PBI gel membranes, which act as soft protective layers against external mechanical forces and astray carbon fibers from the electrode. The soft layers are produced by casting phosphoric acid solutions of commercial PBI powder into membranes and exchanging the absorbed acid into sulfuric acid. A conductivity of 565 mS cm-1 is achieved. A stability test indicates that gel mPBI and dense PBI-OO have higher stability than dense mPBI and dense py-PBI, and gel/PBI-OO/gel is successfully tested for 1070 cycles (ca. 1000 h) at 100 mA cm-2 in the VRFB. The initial energy efficiency (EE) for the first 50 cycles is 90.5 ± 0.2%, and after a power outage stabilized at 86.3 ± 0.5% for the following 500 cycles. The initial EE is one of the highest published so far, and the materials cost for a membrane assembly is 12.35 U.S. dollars at a production volume of 5000 m2 , which makes these membranes very attractive for commercialization.

Atomically Dispersed Iron with Densely Exposed Active Sites as Bifunctional Oxygen Catalysts for Zinc-Air Flow Batteries.

Atomically dispersed iron embedded carbon is a promising bifunctional catalyst for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), but its exposed iron sites must be increased. Herein, the authors propose a double steric hindrance strategy by using zeolitic imidazolate frameworks-8 as the first barrier skeleton and encapsulated phenylboronic acid as the second space obstruction to realize densely exposed atomic iron sites. Prepared PA@Z8-FeNC has the highest iron content (5.49 wt%) among reported transition-metal-based single-atom oxygen catalysts. Meanwhile, its concave surfaces, hollow structures, and hierarchical pores enable the high utilization rate of iron sites to 88.5 ± 4.5% and exposed active site density to 5.2 ± 0.3 × 1020 sites g-1 . Resultantly, PA@Z8-FeNC exhibits superior activity and stability to commercial Pt/C and IrO2 for the ORR and OER in half-cells and zinc-air flow batteries. This provides insight for developing densely and accessibly active sites in single-atom catalysts.