Macroporous polymeric resin for the purification of flavonoids from medicinal plants: A review.

The purification of flavonoids using the macroporous polymer resin method has gained attention in recent years due to its simplicity, precision, cost-effectiveness, and the ability to separate flavonoids from other constituents. Several studies have been conducted to investigate the efficiency and effectiveness of macroporous polymer resin in purifying flavonoids from various plant sources. This review aims to evaluate the existing literature on macroporous polymer resin purification of flavonoids and provide a comprehensive analysis of the current research trends and advancements in this field. It also highlights the importance of optimizing the adsorption parameters and conditions such as resin type, resin concentration, pH, and temperature for efficient purification of flavonoids using macroporous polymer resin. The key findings of this review reveal that macroporous resins with weak polarity, large surface areas, and pore diameters have a stronger adsorption capacity for flavonoids compared to polar resins. Furthermore, ultrasonic-solvent assisted extraction often combines with macroporous resin for effective the extraction and purification of flavonoids.

Separation of bufadienolides from Helleborus thibetanus Franch. by a combination approach involving macroporous resin column chromatography and gradient countercurrent chromatography.

In this study, a combination approach involving macroporous resin (MR) column chromatography and gradient countercurrent chromatography (CCC) was employed to enrich and purify bufadienolides from the roots and rhizomes of Helleborus thibetanus Franch. Initially, a D101 MR-packed column chromatography was utilized for fractionation and enrichment of the bufadienolides, which were effectively eluted from the column using a 60% ethanol solution. CCC was subsequently introduced to separate the enriched product using the ethyl acetate/n-butanol/water (EBuWat, 4:1:5, v/v) and EBuWat (5:0:5, v/v) solvent systems in a gradient elution mode. As results, five bufadienolides, including 6.1 mg of hellebrigenin-3-O-ß-D-glucoside (1), 2.2 mg of tigencaoside A (2), 8.3 mg of deglucohellebrin (3), 3.5 mg of 14 ß-hydroxy-3ß-[ß-D-glucopyranosyl-(1→6)-(ß-D-glucopyranosyl)oxy]-5α-bufa-20,22-dienolide (4), and 3.0 mg of 14ß-hydroxy-3ß-[(ß-D-glucopyranosyl)oxy]-5α-bufa-20,22-dienolide (5), were effectively separated from 300 mg of the enriched product. The respective high-performance liquid chromatography purities were as follows: 95.2%, 75.8%, 85.7%, 82.3%, and 92.8%. This study provides valuable insights for the efficient enrichment and separation of bufadienolides from Helleborus thibetanus Franch.

Feature-based molecular networking with MS2LDA to profile compounds in Lanbuzheng based on ultra-high-performance liquid chromatography-quadrupole Exactive Orbitrap high-resolution mass spectrometry.

Lanbuzheng (Geum japonicum Thunb. var. chinense Bolle), a plant found in Southwest China, is a traditional Chinese medicine that promotes hematopoiesis and antioxidant functions. Many of its chemical constituents remain unknown, posing challenges both to understanding its pharmacological mechanisms and to conducting quality control research. In this work, ultra-high performance liquid chromatography coupled with quadrupole Exactive Orbitrap high-resolution mass spectroscopy was used for profiling the composition of Lanbuzheng. Using positive ion mass spectrometry data enriched from Lanbuzheng extract, feature-based molecular networking (FBMN) was constructed and associated with Mass2Motifs substructures using MS2LDA. Prediction and validation of unknown constituents of Lanbuzheng using a custom-built compound library, SIRIUS, and network annotation propagation, achieved a semi-automated annotation of the molecular network. Based on the custom-built library comprising 206 compounds and the FBMN clustering results, the constituents in Lanbuzheng primarily include tannins, triterpenes, flavonoids, and phenolics. Using only 65 pre-identified compounds as references, 210 unknown compounds were annotated in various polarity regions of Lanbuzheng. Results of the current work indicate that molecular networks enable the efficient annotation of compounds in complex systems, laying the groundwork for the preliminary identification of pharmacologically active constituents of Lanbuzheng.

An effective and comprehensive optimization strategy for preparing Ginkgo biloba leaf extract enriched in shikimic acid by macroporous resin column chromatography.

INTRODUCTION: Previously reported preparation methods of Ginkgo biloba leaf extract (EGBL) have mainly focused on the enrichment of flavonoid glycosides (FG) and terpene trilactones (TT), which led to the underutilization of G. biloba leaves (GBL). OBJECTIVES: To make full use of GBL, in this study, a comprehensive optimization strategy for preparing EGBL by macroporous resin column chromatography was proposed and applied to enrich FG, TT, and shikimic acid (SA) from GBL. METHODOLOGY: Initially, the static adsorption and desorption were executed to select suitable resin. Then, the influences of solution pH were investigated by the static and dynamic adsorption. Subsequently, eight process parameters were systematically investigated via a definitive screening design (DSD). After verification experiments, scale-up enrichment was carried out, investigating the feasibility of the developed strategy for application on an industrial scale. RESULTS: It was found that XDA1 was the most appropriate adsorbent for the preparation of EGBL at solution pH 2.0. Furthermore, based on the constraints of the desired quality attributes, the optimized ranges of operating parameters were successfully acquired, and the verification experiments demonstrated the accuracy and reliability of using DSD to investigate the chromatography process for the preparation of EGBL. Finally, magnified experiments were successfully performed, obtaining the EGBL containing 26.54% FG, 8.96% TT, and 10.70% SA, which reached the SA level of EGB761, an international standard EGBL. CONCLUSION: The present study not only provided an efficient and convenient approach for the preparation of EGBL enriched in SA but also accelerated efforts to high-value utilization of GBL.

Ultrasound-Assisted Extraction of Paeonol from Moutan Cortex: Purification and Component Identification of Extract.

Moutan Cortex (MC) is a traditional Chinese medicine that contains abundant medicinal components, such as paeonol, paeoniflorin, etc. Paeonol is the main active component of MC. In this study, paeonol was extracted from MC through an ultrasound-assisted extraction process, which is based on single-factor experiments and response surface methodology (RSM). Subsequently, eight macroporous resins of different properties were used to purify paeonol from MC. The main components of the purified extract were identified by ultra-performance liquid chromatography-quadrupole-time of flight-mass spectrometry (UPLC-Q-TOF-MS/MS). The results indicate the optimal parameters are as follows: liquid-to-material ratio 21:1 mL/g, ethanol concentration 62%, ultrasonic time 31 min, ultrasonic temperature 36 °C, ultrasonic power 420 W. Under these extraction conditions, the actual yield of paeonol was 14.01 mg/g. Among the eight tested macroporous resins, HPD-300 macroporous resin was verified to possess the highest adsorption and desorption qualities. The content of paeonol increased from 6.93% (crude extract) to 41.40% (purified extract) after the HPD-300 macroporous resin treatment. A total of five major phenolic compounds and two principal monoterpene glycosides were characterized by comparison with reference compounds. These findings will make a contribution to the isolation and utilization of the active components from MC.

Combination of a Deep Eutectic Solvent and Macroporous Resin for Green Recovery of Iridoids, Chlorogenic Acid, and Flavonoids from Eucommia ulmoides Leaves.

To increase the effectiveness of using typical biomass waste as a resource, iridoids, chlorogenic acid, and flavonoids from the waste biomass of Eucommia ulmoides leaves (EULs) were extracted by deep eutectic solvents (DESs) in conjunction with macroporous resin. To optimize the extract conditions, the experiment of response surface was employed with the single-factor of DES composition molar ratio, liquid-solid ratio, water percentage, extraction temperature, and extraction time. The findings demonstrated that the theoretical simulated extraction yield of chlorogenic acid (CGA), geniposidic acid (GPA), aucubin (AU), geniposide (GP), rutin (RU), and isoquercetin (IQU) were 42.8, 137.2, 156.7, 5.4, 13.5, and 12.8 mg/g, respectively, under optimal conditions (hydrogen bond donor-hydrogen bond acceptor molar ratio of 1.96, liquid-solid ratio of 28.89 mL/g, water percentage of 38.44%, temperature of 317.36 K, and time of 55.59 min). Then, 12 resins were evaluated for their adsorption and desorption capabilities for the target components, and the HPD950 resin was found to operate at its optimum. Additionally, the HPD950 resin demonstrated significant sustainability and considerable potential in the recyclability test. Finally, the hypoglycemic in vitro, hypolipidemic in vitro, immunomodulatory, and anti-inflammatory effects of EUL extract were evaluated, and the correlation analysis of six active components with biological activity and physicochemical characteristics of DESs by heatmap were discussed. The findings of this study can offer a theoretical foundation for the extraction of valuable components by DESs from waste biomass, as well as specific utility benefits for the creation and development of natural products.

Optimizing the Extraction and Enrichment of Luteolin from Patrinia villosa and Its Anti-Pseudorabies Virus Activity.

Luteolin from Patrinia villosa exhibits strong antiviral activity. Here, the conditions for extracting and enriching luteolin from P. villosa were optimized. Response surface methodology was used to determine the optimal extraction parameters in terms of reflux time, solvent ratio, extraction temperature, material-to-liquid ratio, and number of extractions. Thereafter, a macroporous resin method was used to enrich luteolin from P. villosa. Finally, the following optimal extraction and enrichment conditions were established: an extraction time of 43.00 min, a methanol/hydrochloric acid solvent ratio of 13:1, an extraction temperature of 77.60 °C, a material/liquid ratio of 1:22, and a total of two extractions. NKA-9 was determined to be the most appropriate resin for enrichment. The ideal adsorption conditions were as follows: a pH of 5.0, a temperature of 25 °C, an initial luteolin concentration of 19.58 µg/mL, a sample loading volume of 2.9 BV, and a sample loading rate of 2 BV/h. The ideal desorption conditions were as follows: distilled water, 30% ethanol and 80% ethanol elution, and 5 BV at a flow rate of 2 BV/h. After optimization, the enrichment recovery rate was 80.06% and the luteolin content increased 3.8-fold. Additionally, the enriched product exhibited a significant inhibitory effect on PRV (Porcine pseudorabies virus) in vitro and in vivo, providing data for developing and applying luteolin from P. villosa.

Separation of Flavonoids and Purification of Chlorogenic Acid from Bamboo Leaves Extraction Residues by Combination of Macroporous Resin and High-Speed Counter-Current Chromatography.

Flavonoids are major active small-molecule compounds in bamboo leaves, which can be easily obtained from the bamboo leaves extraction residues (BLER) after the polysaccharides extraction. Six macroporous resins with different properties were screened to prepare and enrich isoorientin (IOR), orientin (OR), vitexin (VI), and isovitexin (IVI) from BLER, and the XAD-7HP resin with the best adsorption and desorption performance was selected for further evaluation. Based on the static adsorption experiments, the experimental results showed that the adsorption isotherm fitted well with the Langmuir isotherm model, and the adsorption process was better explained by the pseudo-second-order kinetic model. After the dynamic trial of resin column chromatography, 20 bed volume (BV) of upload sample and 60% ethanol as eluting solvent was used in a lab scale-up separation, and the results demonstrated that the content of four flavonoids could be increased by 4.5-fold, with recoveries between 72.86 and 88.21%. In addition, chlorogenic acid (CA) with purity of 95.1% was obtained in water-eluted parts during dynamic resin separation and further purified by high-speed countercurrent chromatography (HSCCC). In conclusion, this rapid and efficient method can provide a reference to utilize BLER to produce high-value-added food and pharmaceutical products.

The Selective Separation of Carnosic Acid and Rosmarinic Acid by Solid-Phase Extraction and Liquid-Liquid Extraction: A Comparative Study.

Rosmarinus officinalis leaves (ROLs) are widely used in the food and cosmetics industries due to their high antioxidant activity and fascinating flavor properties. Carnosic acid (CA) and rosmarinic acid (RA) are regarded as the characteristic antioxidant components of ROLs, and the selective separation of CA and RA remains a significant challenge. In this work, the feasibility of achieving the selective separation of CA and RA from ROLs by solid-phase extraction (SPE) and liquid-liquid extraction (LLE) was studied and compared. The experiments suggested that SPE with CAD-40 macroporous resin as the adsorbent was a good choice for selectively isolating CA from the extracts of ROLs and could produce raw CA with purity levels as high as 76.5%. The LLE with ethyl acetate (EA) as the extraction solvent was more suitable for extracting RA from the diluted extracts of ROLs and could produce raw RA with a purity level of 56.3%. Compared with the reported column chromatography and LLE techniques, the developed SPE-LLE method not only exhibited higher extraction efficiency for CA and RA, but can also produce CA and RA with higher purity.

Study on the synthesis of pine sterol esters in solvent-free systems catalyzed by Candida rugosa lipase immobilized on hydrophobic macroporous resin.

BACKGROUND: Pine sterol ester is a type of novel food source nutrient with great advantages in lowering blood cholesterol levels, inhibiting tumors, preventing prostate enlargement, and regulating immunity. Macroporous resins with large specific surface area, stable structures, and various functional groups (epoxy, amino, and octadecyl groups) have been selected for immobilization of Candida rugosa lipase (CRL) to improve its stability and efficiency in the synthesis of pine sterol esters. A solvent-free strategy using oleic acid (substrate) as an esterification reaction medium is an important alternative for avoiding the use of organic solvents. RESULTS: The immobilization conditions of CRL immobilized on several types of commercial macroporous resins were optimized. Fortunately, by adsorption (hydrophobic interaction), a high immobilization efficiency of CRL was obtained using macroporous resins with hydrophobic octadecyl groups with an immobilization efficiency of 86.5%, enzyme loading of 138.5 mg g-1 and enzyme activity of 34.7 U g-1 . The results showed that a 95.1% yield could be obtained with a molar ratio of oleic acid to pine sterol of 5:1, an enzyme amount of 6.0 U g-1 (relative to pine sterol mass) at 50 °C for 48 h. CONCLUSION: The hydrophobic macroporous resin (ECR8806M) with a large specific surface area and abundant functional groups was used to achieve efficient immobilization of CRL. CRL@ECR8806M is an efficient catalyst for the synthesis of phytosterol esters and has the potential for further large-scale applications. Therefore, this simple, green, and low-cost strategy for lipase immobilization provides new possibilities for the high-efficiency production of pine sterol esters and other food source nutrients. © 2023 Society of Chemical Industry.

[Q-marker prediction of resin ethanol extract of Gegen Qinlian Decoction based on characteristic spectrum and network pharmacology].

The resin ethanol extract of Gegen Qinlian Decoction(GGQLD) has been found to significantly alleviate the intestinal toxicity caused by Irinotecan, but further research is needed to establish its overall quality and clinical medication standards. This study aimed to establish an HPLC characteristic fingerprint of the resin ethanol extract of GGQLD, predicted the targets and signaling pathways of its pharmacological effects based on network pharmacology, identified core compounds with pharmacological relevance, and analyzed potential quality markers(Q-markers) of the resin eluate of GGQLD for relieving Irinotecan-induced toxicity. By considering the uniqueness, measurability, and traceability of Q-markers based on the "five principles" of Q-markers and combining them with network pharmacology techniques, the overall efficacy of the resin ethanol extract of GGQLD can be characterized. Preliminary predictions suggested that the four components of puerarin, berberine, baicalin, and baicalein might serve as potential Q-markers for the resin etha-nol extract of GGQLD. This study provides a basis and references for the quality control and clinical mechanism of the resin ethanol extract of GGQLD.

Adsorption Characteristics and Enrichment of Emodin from Marine-Derived Aspergillus flavipes HN4-13 Extract by Macroporous Resin XAD-16.

Emodin, a hydroxyanthraquinone derivative, has been used as medicine for more than 2000 years due to its extensive pharmacological activities. Large-scale production of emodin has been achieved by optimizing the fermentation conditions of marine-derived Aspergillus flavus HN4-13 in a previous study. However, the fermentation broth contained complex unknown components, which adversely affected the study of emodin. Herein, the conditions for the enrichment of emodin from A. flavipes HN4-13 extract using XAD-16 resin were optimized, and a separation method with high efficiency, simple operation, a low cost, and a large preparative scale was established. The adsorption process of emodin on the XAD-16 resin conformed to pseudo-second-order kinetics and Langmuir models. The optimal conditions for the adsorption process were as follows: An emodin concentration, flow rate, and loading volume of 0.112 mg/mL, 2 BV/h, and 10 BV, respectively. For desorption, 50% ethanol was used to elute impurities and 80% ethanol was used to desorb emodin. After enrichment with XAD-16 resin, the emodin content increased from 1.16% to 11.48%, and the recovery rate was 75.53% after one-step treatment. These results demonstrate the efficiency of the simple adsorption-desorption strategy, using the XAD-16 resin for emodin enrichment.

An Effective Chromatography Process for Simultaneous Purification and Separation of Total Lignans and Flavonoids from Valeriana amurensis.

An effective chromatography process was developed and validated for simultaneous purification and separation of total lignans and flavonoids from Valeriana amurensis. The total lignans and flavonoids in Valeriana amurensis extract were prepurified with macroporous resin column chromatography, and the conditions were optimized as follows: 40 mg/mL Valeriana amurensis extract (2.0 g) solution was loaded onto an AB-8 resin column with a diameter-to-height ratio of 1:7, followed by adsorption for 6 h; then, the column was eluted successively with 5 BV water and 10% and 50% ethanol at a flow rate 2 BV/h. The obtained 50% ethanol fraction was further repurified and separated by polyamide resin column chromatography to obtain the total lignans and flavonoids, respectively. The chromatography conditions were optimized as follows: a 50% ethanol fraction (1.0 g) was mixed with 1.0 g polyamide resin and loaded onto a polyamide resin (60-100 mesh) column with a diameter-to-height ratio of 1:3; then, the column was eluted successively with 6 BV water and 40% and 80% ethanol at a flow rate of 4 BV/h. The total lignans and flavonoids were obtained from water and 80% ethanol fraction, respectively. The content and recovery of standard compounds in total lignans and flavonoids were analyzed with HPLC-PDA, and the feasibility of the process was confirmed.

A Strategy for Identification and Structural Characterization of Compounds from Plantago asiatica L. by Liquid Chromatography-Mass Spectrometry Combined with Ion Mobility Spectrometry.

Plantago asiatica L. (PAL) as a medicinal and edible plant is rich in chemical compounds, which makes the systematic and comprehensive characterization of its components challenging. In this study, an integrated strategy based on three-dimensional separation including AB-8 macroporous resin column chromatography, ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF MS), and ultra-high performance liquid chromatography-mass spectrometry with ion-mobility spectrometry (UHPLC-IM-MS) was established and used to separate and identify the structures of compounds from PAL. The extracts of PAL were firstly separated into three parts by AB-8 macroporous resin and further separated and identified by UHPLC-Q-TOF MS and UHPLC-IM-MS, respectively. Additionally, UHPLC-IM-MS was used to identify isomers and coeluting compounds, so that the product ions appearing at the same retention time (RT)can clearly distinguish where the parent ion belongs by their different drift times. UNIFI software was used for data processing and structure identification. A total of 86 compounds, including triterpenes, iridoids, phenylethanoid glycosides, guanidine derivatives, organic acids, and fatty acids, were identified by using MS information and fragment ion information provided by UHPLC-Q-TOF MS and UHPLC-IM-MS. In particular, a pair of isoforms of plantagoside from PAL were detected and identified by UHPLC-IM-MS combined with the theoretical calculation method for the first time. In conclusion, the AB-8 macroporous resin column chromatography can separate the main compounds of PAL and enrich the trace compounds. Combining UHPLC-IM-MS and UHPLC-Q-TOF MS can obtain not only more fragments but also their unique drift times and RT, which is more conducive to the identification of complex systems, especially isomers. This proposed strategy can provide an effective method to separate and identify chemical components, and distinguish isomers in the complex system of traditional Chinese medicine (TCM).

Separation and Enrichment of Alkaloids from Coptidis Rhizoma and Euodiae Fructus by Macroporous Resin and Evaluation of the Effect on Bile Reflux Gastritis Rats.

The Zuojin Pill consists of Coptidis Rhizoma (CR) and Euodiae Fructus (EF). It has been a classic prescription for the treatment of gastrointestinal diseases in China since ancient times. Alkaloids are considered to be its main pharmacologically active substances. The authors of the present study investigated the feasibility of preparing high purity total alkaloids (TAs) from CR and EF extracts separately and evaluated the effect for the treatment of bile reflux gastritis (BRG). Coptis chinensis Franch. and Evodia rutaecarpa (Juss.) Benth. were used in the study. An optimized method for the enrichment and purification of TAs with macroporous resin was established. Furthermore, qualitative analysis by using ultra-high performance liquid chromatography coupled with electrospray ionization and quadrupole-time of flight mass spectrometry (UHPLC-ESI-QTOF-MS) was explored to identify the components of purified TAs. Thirty-one compounds, thirty alkaloids and one phenolic compound, were identified or tentatively assigned by comparison with reference standards or literature data. A method of ultra-high performance liquid chromatography coupled with diode array detector (UHPLC-DAD) for quantitative analysis was also developed. The contents of nine alkaloids were determined. Moreover, a rat model of BRG was used to investigate the therapeutic effect of the combination of purified TAs from CR and EF. Gastric pathologic examination suggested that the alkaloids' combination could markedly attenuate the pathological changes of gastric mucosa.

Separation of three chromones from Saposhnikovia divaricata using macroporous resins followed by preparative high-performance liquid chromatography.

Prim-O-glucosylcimifugin, cimifugin, and 5-O-methylvisamminoside are three major chromone derivatives of Saposhnikovia divaricata that have many pharmacological activities, such as anti-inflammatory and antitumor activities. In the present work, an effective method for the simultaneous separation of prim-O-glucosylcimifugin, cimifugin, and 5-O-methylvisamminoside with high purities was established using HPD-300 resin coupled with preparative high-performance liquid chromatography. The adsorption kinetics curves of the three compounds on the HPD-300 resin were studied and found to fit well according to the pseudo-second-order equation. The adsorption isotherm results indicated that the adsorption process of the three compounds was exothermic. After a one-run treatment with the resin, the contents of prim-O-glucosylcimifugin, cimifugin, and 5-O-methylvisamminoside increased from 0.29, 0.06, and 0.37% to 13.07, 2.83, and 16.91% with recovery yields of 76.38, 78.25, and 76.73%, respectively. Finally, the purities of the three compounds were found to reach more than 95% after further separation using preparative high-performance liquid chromatography. The method developed in this study was effective and could simultaneously separate three chromones from Saposhnikovia divaricate. The experimental results also showed that the HPD-300 resin is suitable for the separation of chromone derivatives.

Adsorption and Desorption Characteristics of Total Flavonoids from Acanthopanax senticosus on Macroporous Adsorption Resins.

We examined the application of six different resins with the aim of selecting a macroporous resin suitable for purifying Acanthopanax senticosus total flavonoids (ASTFs) from Acanthopanax senticosus crude extract (EAS) by comparing their adsorption/desorption capacities, which led to the selection of HPD-600. Research on the adsorption mechanism showed that the adsorption process had pseudo-second-order kinetics and fit the Freundlich adsorption model. Moreover, the analysis of thermodynamic parameters indicated that the adsorption process is spontaneous and endothermic. The optimal conditions for purification of ASTFs were determined as sample pH of 3, 60% ethanol concentration, and 3 BV·h-1 flow rate, for both adsorption and desorption, using volumes of 2.5 and 4 BV, respectively. The application of macroporous resin HPD-600 to enrich ASTFs resulted in an increase in the purity of total flavonoids, from 28.79% to 50.57%. Additionally, the antioxidant capacity of ASTFs was higher than that of EAS, but both were lower than that of L-ascorbic acid. The changes in ASTFs compositions were determined using ultra-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS), with the results illustrating that the levels of seven major flavonoids of ASTFs were increased compared to that in the crude extract.

Identification and Capture of Phenolic Compounds from a Rapeseed Meal Protein Isolate Production Process By-Product by Macroporous Resin and Valorization Their Antioxidant Properties.

In this study, phenolic compounds from an aqueous protein by-product from rapeseed meal (RSM) were identified by HPLC-DAD and HPLC-ESI-MS, including sinapine, sinapic acid, sinapoyl glucose, and 1,2-di-sinapoyl gentibiose. The main phenolic compound in this by-product was sinapine. We also performed acid hydrolysis to convert sinapine, and sinapic acid derivatives present in the permeate, to sinapic acid. The adsorption of phenolic compounds was investigated using five macroporous resins, including XAD4, XAD7, XAD16, XAD1180, and HP20. Among them, XAD16 showed the highest total phenolic contents adsorption capacities. The adsorption behavior of phenolic compounds was described by pseudo-second-order and Langmuir models. Moreover, thermodynamics tests demonstrated that the adsorption process of phenolic compounds was exothermic and spontaneous. The highest desorption ratio was obtained with 30% (v/v) and 70% (v/v) ethanol for sinapine and sinapic acid, respectively, with a desorption ratio of 63.19 ± 0.03% and 94.68 ± 0.013%. DPPH and ABTS tests revealed that the antioxidant activity of the hydrolyzed fraction was higher than the non-hydrolyzed fraction and higher than the one of vitamin C. Antioxidant tests demonstrated that these phenolic compounds could be used as natural antioxidants, which can be applied in the food industry.

Optimization of Extraction or Purification Process of Multiple Components from Natural Products: Entropy Weight Method Combined with Plackett-Burman Design and Central Composite Design.

In this paper, the optimization of the extraction/purification process of multiple components was performed by the entropy weight method (EWM) combined with Plackett-Burman design (PBD) and central composite design (CCD). We took the macroporous resin purification of Astragalus saponins as an example to discuss the practicability of this method. Firstly, the weight of each component was given by EWM and the sum of the product between the componential content and its weight was defined as the comprehensive score, which was taken as the evaluation index. Then, the single factor method was adopted for determining the value range of each factor. PBD was applied for screening the significant factors. Important variables were further optimized by CCD to determine the optimal process parameters. After the combination of EWM, PBD and CCD, the resulting optimal purification conditions were as follows: pH value of 6.0, the extraction solvent concentration of 0.15 g/mL, and the ethanol volume fraction of 75%. Under the optimal conditions, the practical comprehensive score of recoveries of saponins was close to the predicted value (n = 3). Therefore, the present study provided a convenient and efficient method for extraction and purification optimization technology of multiple components from natural products.

Optimization of Enzyme-Assisted Extraction and Purification of Flavonoids from Pinus koraiensis Nut-Coated Film and Antioxidant Activity Evaluation.

Pinus koraiensis nut-coated film is a kind of by-product of nut processing, which has been shown to contain flavonoids, polyphenols, and other substances that can be used to produce natural antioxidant extracts. In this study, response surface methodology (RSM) was used to optimize the extraction process of flavonoids of P. koraiensis nut-coated film (PNF), and macroporous resin HPD600 was used to purify PNF (P-PNF). Its antioxidant activity was examined by DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging capacity, oxygen free radical absorption capacity (ORAC), total oxygen radical capture (TRAP), and iron ion reduction capacity. Under the ideal extraction conditions comprising a cellulase dosage of 90 U/g, a material/liquid ratio of 1:20 (g/mL), and an extraction time of 2 h, the PNF yield was 3.37%. Purification conditions were sample concentration of 2.0 mg/mL, pH of 5, water washing volume of 3 bed volume (BV), eluent ethanol concentration of 50%, and volume of 2 BV. The P-PNF recovery was 84.32%, and purity increased from 33.80% to 61.70%. Additionally, P-PNF showed increased antioxidant activity compared to PNF. Cumulatively, this study obtained the optimal values for the process parameters in order to achieve the maximum rates of extraction of PNF for economically optimal production at an industrial scale.