Discovery of a series of silicon-based ferrimagnets in CrMnSin (n = 4-20) clusters.

Herein, the structural evolution, electronic and magnetic properties of silicon clusters with two different dopants, CrMnSin (n = 4-20) clusters were investigated at density functional theory (DFT) level. Small-sized CrMnSin (n = 4-9) clusters tend to adopt bipyramid-based geometries, while clusters with sizes n = 10 and 11 prefer to opening cage-like structures. For sizes n = 12 to 14, the half-encapsulated structures gradually transform into closed-cage Cr@Sin structures, with the Mn atom exposed outside. Starting from size 15, both the Cr and Mn atoms are completely encapsulated by silicon atoms. Meanwhile, the Cr and Mn atoms in smaller-sized CrMnSin (n = 4-7) clusters tend to be separated, while they prefer to stay together for larger sizes. Cr atom always acts as electron donor, but not for Mn atom. From the average binding energies, one can conclude that it is easier to form larger size clusters. Smaller and larger sized CrMnSin (n = 4-9 and 19-20) clusters prefer to exhibit ferromagnetic Cr-Mn coupling, while sizes n = 10-18 always exhibit ferrimagnetic state. To our knowledge, the CrMnSin clusters is the first kind of neutral transition-metal doped semiconductor clusters that show ferrimagnetic state within a wide size range.

Magnetic properties of CrMnGen (n = 3-20) clusters.

Due to the potential applications in next-generation micro/nano electronic devices and functional materials, magnetic germanium (Ge)-based clusters are receiving increasing attention. In this work, we reported the structures, electronic and magnetic properties of CrMnGen with sizes n = 3-20. Transition metals (TMs) of Cr and Mn tend to stay together and be surrounded by Ge atoms. Small sized clusters with n ≤ 8 prefer to adopt bipyramid-based structures as the motifs with the excess Ge atoms absorbed on the surface. Starting from n = 9, the structure with one TM atom interior appears and persists until n = 16, and for larger sizes n = 17-20, the two TM atoms are full-encapsulated by Ge atoms to form endohedral structures. The Hirshfeld population analyses show that Cr atom always acts as the electron donor, while Mn atom is always the acceptor except for sizes 3 and 6. The average binding energies of these clusters increase with cluster size n, sharing a very similar trend as that of CrMnSin (n = 4-20) clusters, which indicates that it is favorable to form large-sized clusters. CrMnGen (n = 6, 13, 16, 19, and 20) clusters prefer to exhibit ferromagnetic Cr-Mn coupling, while the remaining clusters are ferrimagnetic.

Utilization of Additive Manufacturing Techniques for the Development of a Novel Scaffolds with Magnetic Properties for Potential Application in Enhanced Bone Regeneration.

This study focuses on designing and evaluating scaffolds with essential properties for bone regeneration, such as biocompatibility, macroporous geometry, mechanical strength, and magnetic responsiveness. The scaffolds are made using 3D printing with acrylic resin and iron oxides synthesized through solution combustion. Utilizing triply periodic minimal surfaces (TPMS) geometry and mask stereolithography (MSLA) printing, the scaffolds achieve precise geometrical features. The mechanical properties are enhanced through resin curing, and magnetite particles from synthesized nanoparticles and alluvial magnetite are added for magnetic properties. The scaffolds show a balance between stiffness, porosity, and magnetic responsiveness, with maximum compression strength between 4.8 and 9.2 MPa and Young's modulus between 58 and 174 MPa. Magnetic properties such as magnetic coercivity, remanence, and saturation are measured, with the best results from scaffolds containing synthetic iron oxides at 1% weight. The viscosity of the mixtures used for printing is between 350 and 380 mPas, and contact angles between 90° and 110° are achieved. Biocompatibility tests indicate the potential for clinical trials, though further research is needed to understand the impact of magnetic properties on cellular interactions and optimize scaffold design for specific applications. This integrated approach offers a promising avenue for the development of advanced materials capable of promoting enhanced bone regeneration.

Advancements in π-Magnetism and Precision Engineering of Carbon-Based Nanostructures.

The emergence of π-magnetism in low-dimensional carbon-based nanostructures, such as nanographenes (NGs), has captured significant attention due to their unique properties and potential applications in spintronics and quantum technologies. Recent advancements in on-surface synthesis under ultra-high vacuum conditions have enabled the atomically precise engineering of these nanostructures, effectively overcoming the challenges posed by their inherent strong chemical reactivity. This review highlights the essential concepts and synthesis methodologies used in studying NGs. It also outlines the remarkable progress made in understanding and controlling their magnetic properties. Advanced characterization techniques, such as scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM), have been instrumental in visualizing and manipulating these nanostructures, which highlighting their critical role in the field. The review underscores the versatility of carbon-based π-magnetic materials and their potential for integration into next-generation electronic devices. It also outlines future research directions aimed at optimizing their synthesis and exploring applications in cutting-edge technologies.

Antiaromaticity of Cycloheptatrienyl Anions: Structure, Acidity, and Magnetic Properties.

Investigations of the nature and degree of antiaromaticity of cycloheptatrienyl anion derivatives using both experimental and computational tools are presented. The ground state of cycloheptatrienyl anion in the gas phase is triplet, planar and Baird-aromatic. In DMSO, it assumes a singlet distorted allylic form with a paratropic ring current. The other derivatives in both phases assume either allylic or diallylic conformations depending on the substituent pattern. A combination of experimental and computational methods was used to determine the pKa values of 16 derivatives in DMSO, which ranged from 36 to -10.7. We revealed that the stronger stabilization of the anionic system, which correlates with acidity, does not necessarily imply a lower degree of antiaromaticity in terms of magnetic properties. Conversely, the substitution pattern first affects the geometry of the ring through the bulkiness of the substituents and their better conjugation with a more distorted system. Consequently, the distortion reduces the cyclic conjugation in the π-system and thereby decreases the paratropic current in a magnetic field, which manifests itself as a decrease in the NICS. The triplet-state geometries and magnetic properties are nearly independent on the substitution pattern, which is typical for simple aromatic systems.

Gd3 TeBO9 : A Rare-Earth Borate with Significant Magnetocaloric Effect.

Magnetic refrigeration technology based on Gd-based paramagnets is expected to be applied to refrigeration in extremely low temperatures, thereby reducing the consumption of liquid helium. Here, we obtained a compound, Gd3 TeBO9 with high Gd3+ concentration through element substitution. The Gd3+ concentration in this compound is as high as 2.4×1024  ions/kg, which is 33 % higher than the commercial Gd3 Ga5 O12 (GGG), and further magnetic tests show that Gd3 TeBO9 has a large magnetic entropy change (57.44 J/(kg K) and 408 mJ/(cm3 K) at 2.6 K and 7 T), which is 1.5 times that of GGG, implying the possibility of its further development as an potential magnetocaloric material.

Anilato-Based Coordination Polymers with Slow Relaxation of the Magnetization: Role of the Synthetic Method and Anilato Ligand.

We have prepared and characterized three coordination polymers formulated as [Dy2(C6O4Cl2)3(fma)6] ⋅ 4.5fma (1) and [Dy2(C6O4X2)3(fma)6] ⋅ 4fma ⋅ 2H2O with X=Br (2) and Cl (3), where fma=formamide and C6O4X2 2-=3,6-disubstituted-2,5-dihydroxy-1,4-benzoquinone dianion with X=Cl (chloranilato) and Br (bromanilato). Compounds 1 and 3 are solvates obtained with slow and fast precipitation methods, respectively. Compounds 2 and 3 are isostructural and only differ in the X group of the anilato ligand. The three compounds present (6,3)-gon two-dimensional hexagonal honey-comb structures. Magnetic measurements indicate that the three compounds show slow relaxation of the magnetization at low temperatures when a continuous magnetic field is applied, although with different relaxation times and energy barriers depending on X and the crystallisation molecules. Compounds 1-3 represent the first examples of anilato-based lattices with formamide and field-induced slow relaxation of the magnetization.

N-Alkylimidazol-5-yl-substituted Nitronyl Nitroxides and Their Mononuclear Cu(II) Complexes: Synthesis, Structure and Magnetic Properties.

A novel synthetic approach has been employed to synthesize a series of new nitronyl nitroxides: 2-(1-propyl-1H-imidazol-5-yl)- (Ln-Pr ), 2-(1-isopropyl-1H-imidazol-5-yl)- (Li-Pr ) and 2-(1-butyl-1H-imidazol-5-yl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-3-oxide-1-oxyl (Ln-Bu ). The reaction of Cu(hfac)2 with LR in a 1 : 2 ratio yields mononuclear heterospin complexes [Cu(hfac)2 (LR )2 ] (LR =Ln-Pr , Li-Pr , Ln-Bu ), which have a similar crystal structure to the "jumping" crystals [Cu(hfac)2 (LMe )2 ] that exhibit chemomechanical activity. It was shown that an increase in the alkyl substituent R leads to changes in the crystal packing of the molecules and the absence of chemomechanical activity. Furthermore, it was found that two polymorph modifications of the heterospin complex [Cu(hfac)2 (Ln-Pr )2 ] can be obtained, and magnetic properties of [Cu(hfac)2 (Ln-Pr )2 ] strongly depend on the angle between the planes of the paramagnetic fragment O•-N-C=N→O and the imidazole ring in Ln-Pr .

THz-EPR-based Magneto-Structural Correlations for Cobalt(II) Single-Ion Magnets with Bis-Chelate Coordination.

New cobalt(II)-based complexes with [N2O2] coordination formed by two bis-chelate ligands were synthesized and characterized by a multi-technique approach. The complexes possess an easy-axis anisotropy (D < 0) and magnetic measurements show a field-induced slow relaxation of magnetization. The spin-reversal barriers, i.e., the splitting of the two lowest Kramers doublets (UZFS), have been measured by THz-EPR spectroscopy, which allows to distinguish the two crystallographically independent species present in one of the complexes. Based on these experimental UZFS energies together with those for related complexes reported in literature, it was possible to establish magneto-structural correlations. UZFS linearly depends on the elongation parameter εT of the (pseudo-)tetrahedral coordination, which is given by the ratio between the average obtuse and acute angles at the cobalt(II) ion, while UZFS was found to be virtually independent of the twist angle of the chelate planes. With increasing deviation from the orthogonality of the latter, the rhombicity (|E/D|) increases.

Size-induced exchange bias in single-phase CoO nanoparticles.

The tuning of exchange bias (EB) in nanoparticles has garnered significant attention due to its diverse range of applications. Here, we demonstrate EB in single-phase CoO nanoparticles, where two magnetic phases naturally emerge as the crystallite size decreases from 34.6 ± 0.8 to 10.8 ± 0.9 nm. The Néel temperature (TN) associated with antiferromagnetic ordering decreases monotonically with the reduction in crystallite size, highlighting the significant influence of size effects. The 34.6 nm nanoparticles exhibit magnetization irreversibility between zero-field cooled (ZFC) and field-cooled (FC) states belowTN. With further reduction in size this irreversibility appears well aboveTN, resulting in the absence of true paramagnetic regime which indicates the occurnace of an additional magnetic phase. The frequency-dependent ac-susceptibility in 10.8 nm nanoparticles suggests slow dynamics of disordered surface spins aboveTN, coinciding with the establishment of long-range order in the core. The thermoremanent magnetization (TRM) and iso-thermoremanent magnetization (IRM) curves suggest a core-shell structure: the core is antiferromagnetic, and the shell consists of disordered surface spins causing ferromagnetic interaction. Hence, the EB in these CoO nanoparticles results from the exchange coupling between an antiferromagnetic core and a disordered shell that exhibits unconventional surface spin characteristics.

Induced ferromagnetism in Ni(II) doped ZnO monolayers via Al co-doping and their optical characteristics:ab initiostudy.

For applications in magneto-electronic devices, diluted magnetic semiconductors (DMSs) usually exhibit spin-dependent coupling and induced ferromagnetism at high Curie temperatures. The processes behind the behavior of optical emission and ferromagnetism, which can be identified by complicated microstructural and chemical characteristics, are still not well understood. In this study, the impact of Al co-doping on the electronic, optical, and magnetic properties of Ni(II) doped ZnO monolayers has been investigated using first principles calculations. Ferromagnetism in the co-doped monolayer is mainly triggered by the exchange coupling between the electrons provided by Al co-doping and Ni(II)-dstates; therefore, the estimated Curie temperature is greater than room temperature. The spin-spin couplings in mono-doped and co-doped monolayers were explained using the band-coupling mechanism. Based on the optical study, we observed that the Ni-related absorption peak occurred at 2.13-2.17 eV, showing a redshift as Ni concentrations increased. The FM coupling between Ni ions in the co-doped monolayer may be responsible for the reduction in the fundamental band gap seen with Al co-doping. We observed peaks in the near IR and visible regions of the co-doped monolayer, which improve the optoelectronic device's photovoltaic performance. Additionally, the correlation between optical characteristics and spin-spin couplings has been studied. We found that the Ni(II)'sd-dtransition bands or fundamental band gap in the near configuration undergoes a significant shift in response to AFM and FM coupling, whereas in the far configuration, they have a negligible shift due to the paramagnetic behavior of the Ni ions. These findings suggest that the magnetic coupling in DMS may be utilized for controlling the optical characteristics.

Chemically Controlled Reversible Magnetic Phase Transition in Two-Dimensional Organometallic Lattices.

Developing an efficient method to reversibly control materials' spin order is urgently needed but challenging in spintronics. Though various physical field control methods have been advancing, the chemical control of spin is little exploited. Here, we propose a chemical means for such spin manipulation, i.e., utilizing the well-known lactim-lactam tautomerization to reversibly modulate the magnetic phase transition in two-dimensional (2D) organometallic lattices. The proposal is verified by theoretically designing several 2D organometallic frameworks with antiferromagnetic to ferrimagnetic spin order transformation modulated by lactim-lactam tautomerization on organic linkers. The transition originates from the change in spin states of organic linkers (from singlet to doublet) via tautomerization. Such a transition further switches materials' electronic structures from normal semiconductors with zero spin polarization to bipolar magnetic semiconductors with valence and conduction band edges 100% spin polarized in opposite spin channels. Moreover, the magnitude of magnetic anisotropy energy also enhances by 5- to 9-fold.

"Core/Shell" Nanocomposites as Photocatalysts for the Degradation of the Water Pollutants Malachite Green and Rhodamine B.

"Core/shell" composites are based on a ferrite core coated by two layers with different properties, one of them is an isolator, SiO2, and the other is a semiconductor, TiO2. These composites are attracting interest because of their structure, photocatalytic activity, and magnetic properties. Nanocomposites of the "core/shell" МFe2O4/SiO2/TiO2 (М = Zn(II), Co(II)) type are synthesized with a core of MFe2O4 produced by two different methods, namely the sol-gel method (SG) using propylene oxide as a gelling agent and the hydrothermal method (HT). SiO2 and TiO2 layer coating is performed by means of tetraethylorthosilicate, TEOS, Ti(IV) tetrabutoxide, and Ti(OBu)4, respectively. A combination of different experimental techniques is required to prove the structure and phase composition, such as XRD, UV-Vis, TEM with EDS, photoluminescence, and XPS. By Rietveld analysis of the XRD data unit cell parameters, the crystallite size and weight fraction of the polymorphs anatase and rutile of the shell TiO2 and of the ferrite core are determined. The magnetic properties of the samples, and their activity for the photodegradation of the synthetic industrial dyes Malachite Green and Rhodamine B are measured in model water solutions under UV light irradiation and simulated solar irradiation. The influence of the water matrix on the photocatalytic activity is determined using artificial seawater in addition to ultrapure water. The rate constants of the photocatalytic process are obtained along with the reaction mechanism, established using radical scavengers where the role of the radicals is elucidated.

Single-Ion Magnetism of the [DyIII(hfac)4]- Anions in the Crystalline Semiconductor {TSeT1.5}●+[DyIII(hfac)4]- Containing Weakly Dimerized Stacks of Tetraselenatetracene.

The oxidation of tetraselenatetracene (TSeT) by tetracyanoquinodimethane in the presence of dysprosium(III) tris(hexafluoroacetylacetonate), DyIII(hfac)3, produces black crystals of {TSeT1.5}●+[DyIII(hfac)4]- (1) salt, which combines conducting and magnetic sublattices. It contains one-dimensional stacks composed of partially oxidized TSeT molecules (formal averaged charge is +2/3). Dimers and monomers can be outlined within these stacks with charge and spin density redistribution. The spin triplet state of the dimers is populated above 128 K with an estimated singlet-triplet energy gap of 542 K, whereas spins localized on the monomers show paramagnetic behavior. A semiconducting behavior is observed for 1 with the activation energy of 91 meV (measured by the four-probe technique for an oriented single crystal). The DyIII ions coordinate four hfac- anions in [DyIII(hfac)4]-, providing D2d symmetry. Slow magnetic relaxation is observed for DyIII under an applied static magnetic field of 1000 Oe, and 1 is a single-ion magnet (SIM) with spin reversal barrier Ueff = 40.2 K and magnetic hysteresis at 2 K. Contributions from DyIII and TSeT●+ paramagnetic species are seen in EPR. The DyIII ion rarely manifests EPR signals, but such signal is observed in 1. It appears due to narrowing below 30 K and has g4 = 6.1871 and g5 = 2.1778 at 5.4 K.

The Effect of Composition on the Properties and Application of CuO-NiO Nanocomposites Synthesized Using a Saponin-Green/Microwave-Assisted Hydrothermal Method.

In this study, we explored the formation of CuO nanoparticles, NiO nanoflakes, and CuO-NiO nanocomposites using saponin extract and a microwave-assisted hydrothermal method. Five green synthetic samples were prepared using aqueous saponin extract and a microwave-assisted hydrothermal procedure at 200 °C for 30 min. The samples were pristine copper oxide (100C), 75% copper oxide-25% nickel oxide (75C25N), 50% copper oxide-50% nickel oxide (50C50N), 25% copper oxide-75% nickel oxide (25C75N), and pristine nickel oxide (100N). The samples were characterized using FT-IR, XRD, XPS, SEM, and TEM. The XRD results showed that copper oxide and nickel oxide formed monoclinic and cubic phases, respectively. The morphology of the samples was useful and consisted of copper oxide nanoparticles and nickel oxide nanoflakes. XPS confirmed the +2 oxidation state of both the copper and nickel ions. Moreover, the optical bandgaps of copper oxide and nickel oxide were determined to be in the range of 1.29-1.6 eV and 3.36-3.63 eV, respectively, and the magnetic property studies showed that the synthesized samples exhibited ferromagnetic and superparamagnetic properties. In addition, the catalytic activity was tested against para-nitrophenol, demonstrating that the catalyst efficiency gradually improved in the presence of CuO. The highest rate constants were obtained for the 100C and 75C25N samples, with catalytic efficiencies of 98.7% and 78.2%, respectively, after 45 min.

Understanding the effects of A-site Ag-doping on LaCoO3 perovskite for NO oxidation: Structural and magnetic properties.

The partial substitution of A-site in perovskites is a major strategy to enhance the catalytic oxidation activity. This study explores the use of silver (Ag) to partially replace the lanthanum (La) ion at the A-site in LaCoO3 perovskite, investigating the role of Ag in the ABO3 perovskite structure, elucidating the nitric oxide (NO) oxidation mechanism over La1-xAgxCoO3 (x = 0.1-0.5) perovskites. La0.7Ag0.3CoO3 with an Ag-doping amount of 0.3, exhibited the highest NO oxidation activity of 88.5% at 275 °C. Characterization results indicated that Ag substitution enhanced the perovskite, maintaining its original phase structure, existing in the form of a mixture of Ag0 and Ag+ in the La1-xAgxCoO3 (x = 0.1-0.5) perovskites. Notably, Ag substitution improved the specific surface area, reduction performance, Co3+, and surface adsorption oxygen content. Additionally, the study investigated the relationship between magnetism and NO oxidation from a magnetism perspective. Ag-doping strengthened the magnetism of La-Ag perovskite, resulting in stronger adsorption of paramagnetic NO. This study elucidated the NO oxidation mechanism over La-Ag perovskite, considering structural and magnetic properties, providing valuable insights for the subsequent development and industrial application of high oxidation ability perovskite catalysts.

Influence of Polytetrafluoroethylene Content, Compaction Pressure, and Annealing Treatment on the Magnetic Properties of Iron-Based Soft Magnetic Composites.

To improve the magnetic properties of iron-based soft magnetic composites (SMCs), polytetrafluoroethylene (PTFE) with excellent heat resistance, electrical insulation, and extremely high electrical resistivity was chosen as an insulating coating material for the preparation of iron-based SMCs. The effects of PTFE content, compaction pressure, and annealing treatment on the magnetic properties of Fe/PTFE SMCs were investigated in detail. The results demonstrate that the PTFE insulating layer is successfully coated on the surface of iron powders, which effectively reduces the core loss, increases the resistivity, and improves the frequency stability and the quality factor. Under the combined effect of optimal PTFE content, compaction pressure, and annealing treatment, the iron-based SMCs exhibit a high effective permeability of 56, high saturation magnetization of 192.9 emu/g, and low total core losses of 355 mW/cm3 and 1705 mW/cm3 at 50 kHz for Bm = 50 mT and 100 mT. This work provides a novel insulating coating layer that optimizes magnetic properties and is advantageous for the development of iron-based SMCs. In addition, it also provides a comprehensive understanding of the relationship between process parameters and magnetic properties, which is of great guiding significance for scientific research and industrial production.

Investigation of Structures, Stabilities, and Electronic and Magnetic Properties of Niobium Carbon Clusters Nb7Cn (n = 1-7).

The geometrical structures, relative stabilities, and electronic and magnetic properties of niobium carbon clusters, Nb7Cn (n = 1-7), are investigated in this study. Density functional theory (DFT) calculations, coupled with the Saunders Kick global search, are conducted to explore the structural properties of Nb7Cn (n = 1-7). The results regarding the average binding energy, second-order difference energy, dissociation energy, HOMO-LUMO gap, and chemical hardness highlight the robust stability of Nb7C3. Analysis of the density of states suggests that the molecular orbitals of Nb7Cn primarily consist of orbitals from the transition metal Nb, with minimal involvement of C atoms. Spin density and natural population analysis reveal that the total magnetic moment of Nb7Cn predominantly resides on the Nb atoms. The contribution of Nb atoms to the total magnetic moment stems mainly from the 4d orbital, followed by the 5p, 5s, and 6s orbitals.

Synergistic Enhancement of Diagnostic Imaging: Synthesis and Preliminary Safety Evaluation of Gadolinium-Doped Carbon Quantum Dots as Dual-Contrast Agent.

The present study explores the synthesis and bio-safety evaluation of gadolinium-doped carbon quantum dots (GCQDs) as a potential dual-contrast agent for diagnostic imaging. GCQDs exhibit both fluorescent and magnetic properties, making them suitable for UV-Vis and magnetic resonance imaging (MRI). The synthesis of GCQDs was achieved via hydrothermal treatment, incorporating gadolinium into the carbon quantum dot matrix. The magnetic properties of GCQDs were analyzed, showing significantly enhanced values compared to gadobutrol, a common MRI contrast agent. However, synthesis constraints limit the gadolinium content achievable in nanodots. To assess the safety of GCQDs, their effects on the embryonic development of zebrafish (Danio rerio) were examined. Various concentrations of GCQDs were tested, observing mortality rates, hatchability, malformations, heartbeats, spontaneous movement, and GCQDs uptake. Dialysis studies indicated that gadolinium ions are incorporated into the internal structure of the carbon nanodots. Zebrafish toxicity tests revealed that while survival rates were comparable to control groups, hatchability decreased significantly with higher gadolinium concentrations in GCQDs. Fluorescence microscopy showed no statistical differences in the fluorescence intensity between groups. These findings suggest that GCQDs could serve as an effective dual-contrast agent, combining the optical imaging capabilities of CQDs with the enhanced MRI contrast provided by gadolinium. This study underscores the need for further research on the synthesis methods and biological interactions of GCQDs to ensure their safety and efficacy in medical applications.

Spin Frustration in Organic Radicals.

Spin frustration, which results from geometric frustration and a systematical inability to satisfy all antiferromagnetic (AF) interactions between unpaired spins simultaneously, is under the spotlight for its importance in physics and materials science. Spin frustration is treated as the structural basis of quantum spin liquids (QSLs). Featuring flexible chemical structures, organic radical species exhibit great potential in building spin-frustrated molecules and lattices. So far, the reported examples of spin-frustrated organic radical compounds include triradicals, tetrathiafulvalene (TTF) radicals and derivatives, [Pd(dmit)2 ] compounds (dmit=1,3-dithiol-2-thione-4,5-dithiolate), nitronyl nitroxides, fullerenes, polycyclic aromatic hydrocarbons (PAHs), and other heterocyclic compounds where the spin frustration is generated intra- or intermolecularly. In this Minireview, we provide a brief summary of the reported radical compounds that possess spin frustration. The related data, including magnetic exchange coupling parameters, spin models, frustration parameters, and crystal lattices, are summarized and discussed.