The Effect of a Degenerative Spine and Adverse Pelvic Mobility on Prosthetic Impingement in Patients Undergoing Total Hip Arthroplasty.

BACKGROUND: Despite the placement of acetabular components in the traditional "safe-zone", dislocations and all parts of the instability spectrum, including impingement, continue to be an issue. Recent research has established the importance of a degenerative spine and adverse pelvic mobility on functional acetabular orientation. The purpose of this study is to quantify the clinical consequences of a degenerative spine and adverse pelvic mobility on prosthetic impingement in patients undergoing total hip arthroplasty. METHODS: Between January 2018 and December 2019, a series of 1592 patients undergoing total hip arthroplasty had functional lateral radiographs and a computed tomography scan taken. Two spinal parameters and 2 pelvic mobility parameters were investigated for their association with impingement. Each patient was evaluated for anterior and posterior impingement, at all orientations within a traditional supine safe zone and a patient-specific functional safe zone. RESULTS: Patients with limited lumbar flexion (stiff spine), higher pelvic incidence-lumbar lordosis mismatch (sagittal imbalance), and more anterior pelvic mobility from stand to flexed-seated, exhibit increased anterior impingement. Patients with larger posterior pelvic mobility from supine-to-stand exhibited increased posterior impingement. Impingement was reduced 3-fold when the target cup orientation was tailored to a patient's functional safe zone rather than a generic target. Six percent of patients showed unavoidable impingement even with an optimized functional cup orientation. CONCLUSION: Our results support growing evidence that patients with a degenerative spine and adverse pelvic mobility are likely to have unfavorable functional cup orientations, resulting in prosthetic impingement. Preoperative functional radiographic screening is recommended to assess the likelihood of a patient experiencing impingement due to their unique spinopelvic mobility.

[Resection of soft tissue tumours : Pitfalls, typical complications and prevention strategies]. / Weichteiltumorresektionen : Fallstricke, typische Komplikationen und Vermeidungsstrategien.

Benign soft tissue lesions are 300 times as common as soft tissue sarcomas; hence, the likelihood of confusion is high. Lesions that are larger than 5 cm, deep, show infiltrative growth, or recur despite benign histology are suspicious for soft tissue sarcoma. The biopsy incision must be carefully chosen; in large lipomas, atypical lipomatous tumor should be considered in the differential diagnosis. Lymphomas can be misdiagnosed and treated as undifferentiated soft tissue sarcoma. Vascular tumors and epithelioid lesions require more attention in histopathologic diagnostics and staging. Inflammatory lesions and aggressive fibromatosis (desmoid tumor) should also be borne in mind. In general, staging should be adapted to the underlying tumor biology. Neoadjuvant and adjuvant multimodal therapy must be discussed with the patient and used in a targeted manner. Superficial infiltrating sarcomas are prone to intralesional resection and may require intraoperative frozen section histology. If plastic reconstruction is necessary, a two-step procedure after proven tumor-free margins can be beneficial. Cavities and seromas, tight sutures, and closing the wound with clips are particularly critical. Wound drains at the thigh, pelvis, and groin should be left longer. Early revision in cases of hematoma or critical wound healing have proven beneficial. Adjuvant therapies are best planned before discharge from hospital. Overall, tumor-specific follow-up can significantly reduce the disadvantages of a recurrence resection.

[Psychoeducation in knee arthroplasty patients : Additional pain management]. / Psychoedukation bei Patienten mit Knieendoprothese : Erweitertes Schmerzmanagement.

Approximately 20-30% of patients remain dissatisfied with their treatment outcome after primary knee arthroplasty. Particularly frequent pain with limited flexibility contrives to reduce the quality of life of affected patients. Psychotherapeutic methods for pain processing after knee arthroplasty have hardly been investigated to date. The current study is dedicated to researching the effect of pain psychoeducation on treatment outcome after primary knee arthroplasty in the sense of additional pain management.

How to Study Biofilms after Microbial Colonization of Materials Used in Orthopaedic Implants.

Over the years, various techniques have been proposed for the quantitative evaluation of microbial biofilms. Spectrophotometry after crystal violet staining is a widespread method for biofilm evaluation, but several data indicate that it does not guarantee a good specificity, although it is rather easy to use and cost saving. Confocal laser microscopy is one of the most sensitive and specific tools to study biofilms, and it is largely used for research. However, in some cases, no quantitative measurement of the matrix thickness or of the amount of embedded microorganisms has been performed, due to limitation in availability of dedicated software. For this reason, we have developed a protocol to evaluate the microbial biofilm formed on sandblasted titanium used for orthopaedic implants, that allows measurement of biomass volume and the amount of included cells. Results indicate good reproducibility in terms of measurement of biomass and microbial cells. Moreover, this protocol has proved to be applicable for evaluation of the efficacy of different anti-biofilm treatments used in the orthopaedic setting. Summing up, the protocol here described is a valid and inexpensive method for the study of microbial biofilm on prosthetic implant materials.

Comparison of Metal Artifact Reduction Algorithms in Patients with Hip Prostheses: Virtual Monoenergetic Images vs. Orthopedic Metal Artifact Reduction.

Purpose: To assess the usefulness of various metal artifact reduction (MAR) methods in patients with hip prostheses. Materials and Methods: This retrospective study included 47 consecutive patients who underwent hip arthroplasty and dual-energy CT. Conventional polyenergetic image (CI), orthopedic-MAR (O-MAR), and virtual monoenergetic image (VMI, 50-200 keV) were tested for MAR. Quantitative analysis was performed in seven regions around the prostheses. Qualitative assessments included evaluation of the degree of artifacts and the presence of secondary artifacts. Results: The lowest amount of image noise was observed in the O-MAR, followed by the VMI. O-MAR also showed the lowest artifact index, followed by high-keV VMI in the range of 120-200 keV (soft tissue) or 200 keV (bone). O-MAR had the highest contrast-to-noise ratio (CNR) in regions with severe hypodense artifacts, while VMI had the highest CNR in other regions, including the periprosthetic bone. On assessment of the CI of pelvic soft tissues, VMI showed a higher structural similarity than O-MAR. Upon qualitative analysis, metal artifacts were significantly reduced in O-MAR, followed by that in VMI, while secondary artifacts were the most frequently found in the O-MAR (p < 0.001). Conclusion: O-MAR is the best technique for severe MAR, but it can generate secondary artifacts. VMI at high keV can be advantageous for evaluating periprosthetic bone.

Osseointegration Pharmacology: A Systematic Mapping Using Artificial Intelligence.

Clinical performance of osseointegrated implants could be compromised by the medications taken by patients. The effect of a specific medication on osseointegration can be easily investigated using traditional systematic reviews. However, assessment of all known medications requires the use of evidence mapping methods. These methods allow assessment of complex questions, but they are very resource intensive when done manually. The objective of this study was to develop a machine learning algorithm to automatically map the literature assessing the effect of medications on osseointegration. Datasets of articles classified manually were used to train a machine-learning algorithm based on Support Vector Machines. The algorithm was then validated and used to screen 599,604 articles identified with an extremely sensitive search strategy. The algorithm included 281 relevant articles that described the effect of 31 different drugs on osseointegration. This approach achieved an accuracy of 95%, and compared to manual screening, it reduced the workload by 93%. The systematic mapping revealed that the treatment outcomes of osseointegrated medical devices could be influenced by drugs affecting homeostasis, inflammation, cell proliferation and bone remodeling. The effect of all known medications on the performance of osseointegrated medical devices can be assessed using evidence mappings executed with highly accurate machine learning algorithms.

Breast reconstruction using a laparoscopically harvested pedicled omental flap after endoscopic mastectomy for patients with breast cancer: an observational study of a minimally invasive method.

BACKGROUND: Breast reconstruction is typically performed using autologous tissue from a laparoscopically harvested omental flap. Because open surgery and another abdominal wall incision for a subcutaneous tunnel cannot be avoided, minimal scars typically cannot be achieved. This study explored a minimally invasive method of pedicled omental flap breast reconstruction in which omentum harvesting, mastectomy, and subcutaneous tunnel establishing were performed laparoscopically and endoscopically, and large incisions on the thoracic and abdominal wall were unnecessary. METHODS: Ten patients with breast cancer were enrolled. They underwent endoscopic subcutaneous mastectomy (ESM) and single-stage breast reconstruction using a laparoscopically harvested pedicled omental flap (LHPOF), which was pulled through a subcutaneous tunnel that was created under laparoscopic vision. The incisions made on the abdominal wall were no wider than 12 mm, and the thoracic wall incisions were no wider than 30 mm. Three of the patients had a prosthetic implant placed for reconstruction at the same time because of the large breast volume, and the omental flaps were used to cover the prostheses. RESULTS: All patients underwent successful single-stage breast reconstruction surgery, and laparotomy was not required. Eight of the patients (80%) had satisfactory aesthetic results (five had excellent results and three had good results). The incisions at the thoracic wall and in the donor site area were short and hidden. The mean operation time was 367.6 min and the mean time for harvesting the omental flap was 62.9 min, similar to previous studies. The total mean blood loss was 37.0 mL. No serious donor-site complications occurred. CONCLUSIONS: LHPOF breast reconstruction combined with ESM is minimally invasive, and satisfactory aesthetic results are achievable. In patients who undergo ESM combined with prosthetic implant reconstruction, the pedicled omental flap can be used to cover the prosthesis instead of using acellular dermal matrix.

[Modular arthrodesis system TITAN (KAM-TITAN) after failed revision total knee arthroplasty : Operative technique and clinical experience]. / Modulares Kniearthrodesesystem TITAN (KAM-TITAN) nach fehlgeschlagener Knieendoprothetik : Operative Technik und klinische Ergebnisse.

OBJECTIVE: Restoration of a painless, weight-bearing extremity with a modular knee arthrodesis system based on a cementless modular revision stem for rotationally stable, diaphyseal anchorage. INDICATIONS: Severe bone loss and compromised soft tissue after failed total knee arthroplasty, two-stage revisions and non-reconstructible knee extensor mechanism deficiency. CONTRAINDICATIONS: Extensive osteolysis preventing diaphyseal anchorage of the prosthesis. Contralateral arthrodesis of the knee joint and/or ipsilateral arthrodesis of the hip joint and contralateral lower extremity amputation. SURGICAL TECHNIQUE: In revision cases, removal of the total knee arthroplasty, spacer, the bone cement and all intramedullary granulation tissue. Reaming the medullary cavity with intramedullary reamers to cortical contact. Restoring leg length and rotation with trial implants. After implantation of the femoral and tibial stems, placing and tensioning of the rotationally aligned coupling elements. POSTOPERATIVE MANAGEMENT: Mobilization on two forearm crutches from postoperative day 1. Removal of the Redon drains after 48 h. Partial weight bearing of 20 kg for 6 weeks postoperatively. If plain radiographs show unchanged seating of the prosthesis after 6 weeks, loading can be increased by 10 kg per week until full weight bearing is achieved. RESULTS: Between 2007 and 2012 clinical data were collected and analyzed retrospectively. A total of 27 patients had been treated within a two-stage exchange procedure with implantation of a modular intramedullary arthodesis nail TITAN (KAM-TITAN). The mean follow-up was 30.9 ± 12.0 months. A functional evaluation was performed using the Oxford Knee Score (OKS). The analyzed patients showed a mean score of 39.2 ± 8.3. To determine the pain level the Visual Analog Scale (VAS) for pain was used and showed a mean score of 2.9 ± 1.3. The rate of definitely free of infection (using Laffer criteria) at last follow-up was 85.2%.

Breast reconstruction with anatomical implants: A review of indications and techniques based on current literature.

One important modality of breast cancer therapy is surgical treatment, which has become increasingly less mutilating over the last century. Breast reconstruction has become an integrated part of breast cancer treatment due to long-term psychosexual health factors and its importance for breast cancer survivors. Both autogenous tissue-based and implant-based reconstruction provides satisfactory reconstructive options due to better surgeon awareness of "the ideal breast size", although each has its own advantages and disadvantages. An overview of the current options in breast reconstruction is presented in this article.

Bulk Metallic Glasses for Implantable Medical Devices and Surgical Tools.

With increasing knowledge of the materials science of bulk metallic glasses (BMGs) and improvements in their properties and processing, they have started to become candidate materials for biomedical devices. A dichotomy in the types of medical applications has also emerged, in which some families of BMGs are being developed for permanent devices whilst another family - of Mg-based alloys - is showing promise in bioabsorbable implants. The current status of these metallurgical and technological developments is summarized.

Prevention and treatment of Staphylococcus aureus biofilms.

S. aureus colonizes both artificial and tissue surfaces in humans causing chronic persistent infections that are difficult to cure. It is a notorious pathogen due to its antibiotic recalcitrance and phenotypic adaptability, both of which are facilitated by its ability to develop biofilms. S. aureus biofilms challenge conventional anti-infective approaches, most notably antibiotic therapy. Therefore there is an unmet need to develop and include parallel approaches that target S. aureus biofilm infections. This review discusses two broad anti-infective strategies: (1) preventative approaches (anti-biofilm surface coatings, the inclusion of biofilm-specific vaccine antigens); and (2) approaches aimed at eradicating established S. aureus biofilms, particularly those associated with implant infections. Advances in understanding the distinct nature of S. aureus biofilm development and pathogenesis have led to growing optimism in S. aureus biofilm targeted anti-infective strategies. Further research is needed however, to see the successful administration and validation of these approaches to the diverse types of infections caused by S. aureus biofilms from multiple clinical strains.