Specific Non-Reducing Ends in Heparins from Different Animal Origins: Building Blocks Analysis Using Reductive Amination Tagging by Sulfanilic Acid.

Heparins are linear sulfated polysaccharides widely used as anticoagulant drugs. Their nonreducing-end (NRE) has been little investigated due to challenges in their characterization, but is known to be partly generated by enzymatic cleavage with heparanases, resulting in N-sulfated glucosamines at the NRE. Uronic NRE (specifically glucuronic acids) have been isolated from porcine heparin, with GlcA-GlcNS,3S,6S identified as a porcine-specific NRE marker. To further characterize NRE in heparinoids, a building block analysis involving exhaustive heparinase digestion and subsequent reductive amination with sulfanilic acid was performed. This study describes a new method for identifying heparin classical building blocks and novel NRE building blocks using strong anion exchange chromatography on AS11 columns for the assay, and ion-pair liquid chromatography-mass spectrometry for building block identification. Porcine, ovine, and bovine intestine heparins were analyzed. Generally, NRE on these three heparins are highly sulfated moieties, particularly with 3-O sulfates, and the observed composition of the NRE is highly dependent on heparin origin. At the highest level of specificity, the isolated marker was only detected in porcine heparin. However, the proportion of glucosamines in the NRE and the proportion of glucuronic/iduronic configurations in the NRE uronic moieties greatly varied between heparin types.

Isolation and characterization of Bradyrhizobium sp. 224 capable of degrading sulfanilic acid.

A bacterial strain (strain 224), which has the ability to utilize sulfanilic acid as a sole source of carbon, was isolated from soil. 16S rRNA gene sequence obtained from strain 224 exhibited 100% identical to that of species in the genus Bradyrhizobium. Strain 224 degraded 4.7 mM of sulfanilic acid and released almost the same molar concentration of sulfate ion.

Exploration of electronic and vibrational properties of sulfanilic acid through periodic and non-periodic DFT calculations.

CONTEXT: The electronic, discrete water solvation, and vibrational properties of zwitterionic sulfanilic acid were thoroughly investigated using periodic and non-periodic DFT approaches. The periodic-DFT results, obtained by employing the PBE-TS functional (Perdew-Burke-Ernzerhof (PBE) functional with the Tkatchenko and Scheffler (TS) dispersion correction) were first presented in order to analyze the band structures of the studied crystal. An attentive reading of the predicted band structures has shown three lowest gap energies calculated at 4.23, 4.24, and 4.29 eV arising from the Γ→Γ, Γ→Z, and Γ→S transitions, respectively. Then, non-periodic calculations were carried out, at the B3LYP-D3 level of theory (B3LYP functional with the D3 Grimme dispersion correction) in order to optimize the sulfanilic acid-(H2O)10 complex. Starting from the optimized structure, non-covalent interaction calculations were performed and the H-bonding, van der Waals, and steric effect interactions were identified. Finally, the PBE-TS calculations were strengthened by conducting anharmonic B3LYP-D3 calculations in order to achieve a complete decryption of the experimental IR spectrum of sulfanilic acid. The spectral analysis is not limited only to the interpretation of both the NH/CH stretching and fingerprint regions but also extended to the 1800-2600 cm-1 region, which is characterized by a strong anharmonic effect. In the latter wavenumber region, the large experimental IR band centered at 1937 cm-1 is reproduced theoretically employing the anharmonic B3LYP-D3 calculations. The similarity of this band with those usually considered as a fingerprint of zwitterionic amino acids is observed, and its origin is elucidated theoretically. In the vibrational spectroscopy field, the calculations presented in this study are probably the most appropriate for achieving vast analysis and accurate assignments of vibrational spectra of hydrogen bonding compounds recorded in the solid state. METHOD: The periodic and non-periodic calculations were conducted within the Density Functional Theory (DFT) using the Generalized Gradient Approximation (GGA) at the PBE-TS level of theory and B3LYP-D3 functional with the 6-311++G(d,p) basis set, respectively. The PBE-TS and B3LYP-D3/6-311++G(d,p) calculations were performed using the CASTEP and Gaussian 09 programs, respectively. In addition, The non-covalent interactions were calculated by the Multiwfn 3.8 software. The obtained results for different calculations were visualized by employing the visualization tools in Materials Studio, GaussView, VMD, and Gnuplot programs.

A 3D copper (II) coordination polymer based on sulfanilic acid ligand (CP 1) for efficient biomolecular interaction with bovine serum albumin: spectroscopic, molecular modelling and DFT analysis.

Several biochemical reactions occur during the interaction of metal complexes and proteins due to conformational modifications in the structure of the protein, which provide fundamental knowledge of the effect, mechanism, and transport of many drugs throughout the body. Here, we report the synthesis, identification, and impact of the 3-dimensional Copper(II)sulfanilic acid coordination polymer (CP 1) on interactions with bovine serum albumin (BSA). The CP 1 was synthesized via a simple hot stirring method, and the single crystal XRD confirms the effective bonding interactions between metal and organic ligand, forming a crystalline polymeric chain and the topological study shows the sql type of underlying net topology. Powder XRD, Fourier transform infrared spectroscopy, and thermogravimetric analysis were also performed. Moreover, DFT/B3LYP calculations provide chemical precision for the resulting complex. Further, the changes that occur in the secondary structure of protein when CP 1 binds with BSA as well as its binding capacity were investigated via circular dichroism analysis and spectroscopic methods such as UV-absorption spectroscopy and fluorescence spectroscopy, respectively. The CP 1/BSA complex melting point was also measured, and its temperature-dependent heat denaturation was studied along with molecular docking.Communicated by Ramaswamy H. Sarma.

Adsorption of Phenylalanine from Aqueous Solutions Using Activated Carbon from Sunflower Meal Functionalized with Sulfonic Groups.

The present work proposes the use of an agro-industrial residue from the sunflower crop as a feedstock to produce a low-cost adsorbent with a chemically modified surface bearing sulfonic groups. This modified low-cost adsorbent can be used for the removal of phenylalanine, and can also be applied in the process of obtaining a source of protein supplementation for patients with phenylketonuria. The functionalization of the adsorbent with sulfonic groups was adapted and presented advantages in terms of execution time, energy expenditure, number of reagents used and adsorbed amino acids. The produced adsorbent presented a surface area of 317.31 m2 g-1 with a predominance of micro- and mesopores, that influenced an approximate 30-fold reduction in adsorption equilibrium time. The optimization results indicated a higher adsorption capacity (39.64 mg g-1) in pH = 4; temperature of 25 °C and adsorbent dosage of 10 g L-1. The FTIR analyzes and the qualitative analysis of the elements present in the samples by EDS confirmed the introduction of sulfonic groups in the MPS500 coal. This work contributed to the understanding behind the adsorption of L-phenylalanine on charcoal surfaces functionalized with sulfonic groups, showing that they can be more selective for the adsorption of phenylalanine in a competitive system.

Colorimetric detection of the ß-agonist ractopamine in animal feed, tissue and urine samples using gold-silver alloy nanoparticles modified with sulfanilic acid.

A highly sensitive, selective and simple method was proposed for colorimetric detection of ractopamine on the basis of the interaction between ractopamine and sulfanilic acid-modified gold-silver alloy nanoparticles (AuAgNPs). The AuAgNPs were prepared by the reduction of HAuCl4 and AgNO3 with sodium citrate in aqueous medium and further modified by sulfanilic acid. The interaction of ractopamine with sulfanilic acid induced rapid aggregation of sulfanilic acid-modified AuAgNPs along with an optical colour change, leading to precise quantification which could be detected by absorptiometry. Under the optimum conditions, the absorbance ratio (A600/A435) of sulfanilic acid-modified AuAgNPs exhibited a linear relationship with the concentration of ractopamine in the range of 4.5-31.6 ng/mL. The detection limit of ractopamine was 1.5 ng/mL. The established novel colorimetric detection method showed high selectivity towards ractopamine. The method was successfully applied to detect ractopamine in spiked pork, swine feed and swine urine samples with excellent recoveries from 94.4% to 112.5%. These results demonstrated that the proposed new method has a good potential for practical applications.

The ephemeral dihydrate of sulfanilic acid.

Evaporation of an aqueous solution of sulfanilic acid (systematic name: 4-aminobenzene-1-sulfonic acid) at 273 K affords a crystalline dihydrate, C6H7NO3S·2H2O. The organic molecule exists as a zwitterion; two zwitterions are aligned in an antiparallel fashion about a crystallographic centre of inversion. They interact directly via two N-H...O hydrogen bonds between the ammonium group of one zwitterion and the sulfonate group of its symmetry-related counterpart, and their aromatic rings are π-stacked, with an interplanar distance of 3.533 (3) Å. One of the cocrystallized water molecules connects the resulting pairs into layers and the second crosslinks the layers into a three-dimensional network. All H atoms connected to N or O atoms find acceptors in suitable geometries. In the resulting crystal, polar and hydrogen-bond-dominated slabs alternate with stacks of organic arene rings. Although the new dihydrate shows efficient space filling, with a packing coefficient of 75.7%, it is unstable and undergoes fast desolvation at room temperature. In this process, the orthorhombic ansolvate forms as a pure phase.

Effective Removal of Sulfanilic Acid From Water Using a Low-Pressure Electrochemical RuO2-TiO2@Ti/PVDF Composite Membrane.

Removal of sulfanilic acid (SA) from water is an urgent but still challenging task. Herein, we developed a low pressure electrochemical membrane filtration (EMF) system for SA decontamination using RuO2-TiO2@Ti/PVDF composite membrane to serve as not only a filter but also an anode. Results showed that efficient removal of SA was achieved in this EMF system. At a charging voltage of 1.5 V and a electrolyte concentration of 15 mM, flow-through operation with a hydraulic retention time (HRT) of 2 h led to a high SA removal efficiency (80.4%), as expected from the improved contact reaction of this compound with ROS present at the anode surface. Cyclic voltammetry (CV) analysis indicated that the direct anodic oxidation played a minor role in SA degradation. Electron spin resonance (ESR) spectra demonstrated the production of •OH in the EMF system. Compared to the cathodic polarization, anodic generated ROS was more likely responsible for SA removal. Scavenging tests suggested that adsorbed •OH on the anode (>•OH) played a dominant role in SA degradation, while O2•- was an important intermediate oxidant which mediated the production of •OH. The calculated mineralization current efficiency (MCE) of the flow-through operated system 29.3% with this value much higher than that of the flow-by mode (5.1%). As a consequence, flow-through operation contributed to efficient oxidation of SA toward CO2 and nontoxic carboxylic acids accounting for 71.2% of initial C. These results demonstrate the potential of the EMF system to be used as an effective technology for water decontamination.

Sulfanilic acid increases intracellular free-calcium concentration, induces reactive oxygen species production and impairs trypsin secretion in pancreatic AR42J cells.

We studied the effects of the tartrazine-metabolite sulfanilic acid on the physiology of pancreatic AR42J cells. Sulfanilic acid (1 µM-1 mM) induced a slow and progressive increase in intracellular free-calcium concentration that reached a plateau. The effect of sulfanilic acid was not concentration-dependent. Stimulation of cells with thapsigargin (1 µM) after treatment with sulfanilic acid (1 mM) induced a smaller Ca2+ response compared with that obtained with thapsigargin alone. Sulfanilic acid induced a concentration-dependent production of reactive oxygen species; however, this effect was not Ca2+-dependent. Depolarization of mitochondrial membrane potential was observed at the concentration of 1 mM sulfanilic acid. In the presence of the compound a decrease in the GSH/GSSG ratio was observed. A decrease in the expression of superoxide dismutase 2 was noted. Finally, stimulation of cells with CCK-8 led to a concentration-dependent increase of trypsin secretion that was impaired by pretreatment of cells with sulfanilic acid. Preincubation of cells with the antioxidant melatonin (100 µM) reduced the effect of sulfanilic acid on trypsin secretion. We conclude that sulfanilic acid might induce oxidative stress, which could alter Ca2+ signaling and enzyme secretion in pancreatic AR42J cells. This creates a situation potentially leading to damage of the exocrine pancreas.

Sulfanilic acid-modified chitosan mini-spheres and their application for lysozyme purification from egg white.

A cation exchange matrix with zwitterionic and multimodal properties was synthesized by a simple reaction sequence coupling sulfanilic acid to a chitosan based support. The novel chromatographic matrix was physico-chemically characterized by ss-NMR and ζ potential, and its chromatographic performance was evaluated for lysozyme purification from diluted egg white. The maximum adsorption capacity, calculated according to Langmuir adsorption isotherm, was 50.07 ± 1.47 mg g-1 while the dissociation constant was 0.074 ± 0.012 mg mL-1 . The process for lysozyme purification from egg white was optimized, with 81.9% yield and a purity degree of 86.5%, according to RP-HPLC analysis. This work shows novel possible applications of chitosan based materials. The simple synthesis reactions combined with the simple mode of use of the chitosan matrix represents a novel method to purify proteins from raw starting materials. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:387-396, 2018.

Nigella sativa oil protects against tartrazine toxicity in male rats.

This study aimed to evaluate the protective role of Nigella sativa oil against the adverse effects of tartrazine on male rats. 18 albino rats were divided randomly into four groups (n = 6). The first (G1) is the negative control, the second group (G2) is the positive control received 10 mg/kg b.w. tartrazine in the diet and the third (G3) received the same dose of tartrazine as in G2 and co-treated with Nigella sativa oil for 8 weeks. Tartrazine decreased total protein, antioxidants and high density lipoproteins, whereas increased liver enzyme, kidney function parameters, total cholesterol, triglycerides, low density lipoproteins and lipid peroxidation in the positive control group. In addition, it caused pathological changes in the tissues of liver, kidney, testes and stomach. Treating tartrazine supplemented rats of G3 with Nigella sativa oil for 8 weeks significantly improved all biochemical parameters and restored the tissues of kidney, stomach, testes and liver to normal. It could be concluded that N. sativa oil succeeded in protecting male rats against the adverse conditions resulted from tartrazine administration.

Reducing non-productive adsorption of cellulase and enhancing enzymatic hydrolysis of lignocelluloses by noncovalent modification of lignin with lignosulfonate.

Four fractions of one commercial sodium lignosulfonate (SXP) with different molecular weight (MW) and anionic polymers were studied to reduce non-productive adsorption of cellulase on bound lignin in a lignocellulosic substrate. SXP with higher MW had stronger blocking effect on non-productive adsorption of a commercial Trichoderma reesi cellulase cocktail (CTec2) on lignin measured by quartz crystal microgravimetry with dissipation monitoring. Linear anionic aromatic polymers have strong blocking effect, but they would also reduce CTec2 adsorption on cellulose to decrease the enzymatic activity. The copolymer of lignin and polyethylene glycol (AL-PEG1000) has strong enhancement in enzymatic hydrolysis of lignocelluloses, because it not only improves the cellulase activity to cellulose, but also blocks the non-productive cellulase adsorption on lignin. Apart from improving the cellulase activity to cellulose, the enhancements of enzymatic hydrolysis of lignocellulose by adding AL-PEG1000 and SXPs are the result of the decreased cellulase non-productive adsorption on lignin.