RESUMEN
Rigosertib is a styryl benzyl sulfone that inhibits growth of tumor cells and acts as a RAS mimetic by binding to Ras binding domains of RAS effectors. A recent study attributed rigosertib's mechanism of action to microtubule binding. In that study, rigosertib was obtained from a commercial vendor. We compared the purity of clinical-grade and commercially sourced rigosertib and found that commercially sourced rigosertib contains approximately 5% ON01500, a potent inhibitor of tubulin polymerization. Clinical-grade rigosertib, which is free of this impurity, does not exhibit tubulin-binding activity. Cell lines expressing mutant ß-tubulin have also been reported to be resistant to rigosertib. However, our study showed that these cells failed to proliferate in the presence of rigosertib at concentrations that are lethal to wild-type cells. Rigosertib induced a senescence-like phenotype in the small percentage of surviving cells, which could be incorrectly scored as resistant using short-term cultures.
Asunto(s)
Antineoplásicos/farmacología , Proliferación Celular , Glicina/análogos & derivados , Neoplasias Pulmonares/patología , Sulfonas/farmacología , Tubulina (Proteína)/metabolismo , Contaminación de Medicamentos , Resistencia a Antineoplásicos , Glicina/farmacología , Humanos , Neoplasias Pulmonares/tratamiento farmacológico , Neoplasias Pulmonares/metabolismo , Mutación , Tubulina (Proteína)/química , Tubulina (Proteína)/genética , Células Tumorales CultivadasRESUMEN
We recently used CRISPRi/a-based chemical-genetic screens and cell biological, biochemical, and structural assays to determine that rigosertib, an anti-cancer agent in phase III clinical trials, kills cancer cells by destabilizing microtubules. Reddy and co-workers (Baker et al., 2020, this issue of Molecular Cell) suggest that a contaminating degradation product in commercial formulations of rigosertib is responsible for the microtubule-destabilizing activity. Here, we demonstrate that cells treated with pharmaceutical-grade rigosertib (>99.9% purity) or commercially obtained rigosertib have qualitatively indistinguishable phenotypes across multiple assays. The two formulations have indistinguishable chemical-genetic interactions with genes that modulate microtubule stability, both destabilize microtubules in cells and in vitro, and expression of a rationally designed tubulin mutant with a mutation in the rigosertib binding site (L240F TUBB) allows cells to proliferate in the presence of either formulation. Importantly, the specificity of the L240F TUBB mutant for microtubule-destabilizing agents has been confirmed independently. Thus, rigosertib kills cancer cells by destabilizing microtubules, in agreement with our original findings.
Asunto(s)
Antineoplásicos/farmacología , Proliferación Celular , Glicina/análogos & derivados , Microtúbulos/efectos de los fármacos , Neoplasias/patología , Preparaciones Farmacéuticas/metabolismo , Sulfonas/farmacología , Tubulina (Proteína)/metabolismo , Células Cultivadas , Cristalografía por Rayos X , Contaminación de Medicamentos , Glicina/farmacología , Humanos , Mutación , Neoplasias/tratamiento farmacológico , Neoplasias/metabolismo , Preparaciones Farmacéuticas/química , Conformación Proteica , Tubulina (Proteína)/química , Tubulina (Proteína)/genéticaRESUMEN
Heparins have been invaluable therapeutic anticoagulant polysaccharides for over a century, whether used as unfractionated heparin or as low molecular weight heparin (LMWH) derivatives. However, heparin production by extraction from animal tissues presents multiple challenges, including the risk of adulteration, contamination, prion and viral impurities, limited supply, insecure supply chain, and significant batch-to-batch variability. The use of animal-derived heparin also raises ethical and religious concerns, as well as carries the risk of transmitting zoonotic diseases. Chemoenzymatic synthesis of animal-free heparin products would offer several advantages, including reliable and scalable production processes, improved purity and consistency, and the ability to produce heparin polysaccharides with molecular weight, structural, and functional properties equivalent to those of the United States Pharmacopeia (USP) heparin, currently only sourced from porcine intestinal mucosa. We report a scalable process for the production of bioengineered heparin that is biologically and compositionally similar to USP heparin. This process relies on enzymes from the heparin biosynthetic pathway, immobilized on an inert support and requires a tailored N-sulfoheparosan with N-sulfo levels similar to those of porcine heparins. We also report the conversion of our bioengineered heparin into a LMWH that is biologically and compositionally similar to USP enoxaparin. Ultimately, we demonstrate major advances to a process to provide a potential clinical and sustainable alternative to porcine-derived heparin products.
Asunto(s)
Heparina de Bajo-Peso-Molecular , Heparina , Animales , Porcinos , Heparina/metabolismo , Heparina de Bajo-Peso-Molecular/química , Anticoagulantes/química , Peso Molecular , Contaminación de MedicamentosRESUMEN
The invention of fossil fuel-derived plastics changed and reshaped society for the better; however, their mass production has created an unprecedented accumulation of waste and an environmental crisis. Scientists are searching for better ways to reduce plastic waste than the current methods of mechanical recycling and incineration, which are only partial solutions. Biological means of breaking down plastics have been investigated as alternatives, with studies mostly focusing on using microorganisms to biologically degrade sturdy plastics like polyethylene (PE). Unfortunately, after a few decades of research, biodegradation by microorganisms has not provided the hoped-for results. Recent studies suggest that insects could provide a new avenue for investigation into biotechnological tools, with the discovery of enzymes that can oxidize untreated PE. But how can insects provide a solution that could potentially make a difference? And how can biotechnology revolutionize the plastic industry to stop ongoing/increasing contamination?
Asunto(s)
Plásticos , Polietileno , Contaminación de MedicamentosRESUMEN
Custom oligonucleotides (oligos) are widely used reagents in biomedical research. Some common applications of oligos include polymerase chain reaction (PCR), sequencing, hybridization, microarray, and library construction. The reliability of oligos in such applications depends on their purity and specificity. Here, we report that commercially available oligos are frequently contaminated with nonspecific sequences (i.e. other unrelated oligonucleotides). Most of the oligos that we designed to amplify clustered regularly interspersed palindromic repeats (CRISPR) guide sequences contained nonspecific CRISPR guides. These contaminants were detected in research-grade oligos procured from eight commercial oligo-suppliers located in three different geographic regions of the world. Deep sequencing of some of the oligos revealed a variety of contaminants. Given the wide range of applications of oligos, the impact of oligo cross-contamination varies greatly depending on the field and the experimental method. Incorporating appropriate control experiments in research design can help ensure that the quality of oligo reagents meets the intended purpose. This can also minimize risk depending on the purposes for which the oligos are used.
Asunto(s)
Repeticiones Palindrómicas Cortas Agrupadas y Regularmente Espaciadas , Contaminación de Medicamentos , Indicadores y Reactivos , Oligonucleótidos , Secuencia de Bases , Repeticiones Palindrómicas Cortas Agrupadas y Regularmente Espaciadas/genética , Oligonucleótidos/química , Oligonucleótidos/normas , Técnicas Genéticas , Indicadores y Reactivos/análisis , Indicadores y Reactivos/normas , Industrias/normasRESUMEN
Needle-and-syringe-based delivery has been the commercial standard for vaccine administration to date. With worsening medical personnel availability, increasing biohazard waste production, and the possibility of cross-contamination, we explore the possibility of biolistic delivery as an alternate skin-based delivery route. Delicate formulations like liposomes are inherently unsuitable for this delivery model as they are fragile biomaterials incapable of withstanding shear stress and are exceedingly difficult to formulate as a lyophilized powder for room temperature storage. Here we have developed a approach to deliver liposomes into the skin biolistically-by encapsulating them in a nano-sized shell made of Zeolitic Imidazolate Framework-8 (ZIF-8). When encapsulated within a crystalline and rigid coating, the liposomes are not only protected from thermal stress, but also shear stress. This protection from stressors is crucial, especially for formulations with cargo encapsulated inside the lumen of the liposomes. Moreover, the coating provides the liposomes with a solid exterior that allows the particles to penetrate the skin effectively. In this work, we explored the mechanical protection ZIF-8 provides to liposomes as a preliminary investigation for using biolistic delivery as an alternative to syringe-and-needle-based delivery of vaccines. We demonstrated that liposomes with a variety of surface charges could be coated with ZIF-8 using the right conditions, and this coating can be just as easily removed-without causing any damage to the protected material. The protective coating prevented the liposomes from leaking cargo and helped in their effective penetration when delivered into the agarose tissue model and porcine skin tissue.
Asunto(s)
Estructuras Metalorgánicas , Zeolitas , Animales , Porcinos , Liposomas , Biolística , Materiales Biocompatibles , Contaminación de MedicamentosAsunto(s)
Enfermedad de Alzheimer , Péptidos beta-Amiloides , Contaminación de Medicamentos , Hormona del Crecimiento , Humanos , Enfermedad de Alzheimer/inducido químicamente , Enfermedad de Alzheimer/etiología , Péptidos beta-Amiloides/efectos adversos , Péptidos beta-Amiloides/toxicidad , Cadáver , Hormona del Crecimiento/administración & dosificación , Modelos BiológicosRESUMEN
Analyzing coeluting impurities with similar masses in synthetic oligonucleotides by liquid chromatography-mass spectrometry (LC-MS) poses challenges due to inadequate separation in either dimension. Herein, we present a direct method employing fully resolved isotopic envelopes, enabled by high resolution mass spectrometry (HRMS), to identify and quantify isobaric impurity ions resulting from the deletion or addition of a uracil (U) or cytosine (C) nucleotide from or to the full-length sequence. These impurities may each encompass multiple sequence variants arising from various deletion or addition sites. The method utilizes a full or targeted MS analysis to measure accurate isotopic distributions that are chemical formula dependent but nucleotide sequence independent. This characteristic enables the quantification of isobaric impurity ions involving sequence variants, a capability typically unavailable in sequence-dependent MS/MS methods. Notably, this approach does not rely on standard curves to determine isobaric impurity compositions in test samples; instead, it utilizes the individual isotopic distributions measured for each impurity standard. Moreover, in cases where specific impurity standards are unavailable, the measured isotopic distributions can be adequately replaced with the theoretical distributions (calculated based on chemical formulas of standards) adjusted using experiment-specific correction factors. In summary, this streamlined approach overcomes the limitations of LC-MS analysis for coeluting isobaric impurity ions, offering a promising solution for the in-depth profiling of complex impurity mixtures in synthetic oligonucleotide therapeutics.
Asunto(s)
Oligonucleótidos , Espectrometría de Masas en Tándem , Espectrometría de Masas en Tándem/métodos , Oligonucleótidos/química , Cromatografía Líquida con Espectrometría de Masas , Peso Molecular , Contaminación de Medicamentos , Cromatografía Líquida de Alta Presión/métodosRESUMEN
In vitro transcription (IVT) of mRNA is a versatile platform for a broad range of biotechnological applications. Its rapid, scalable, and cost-effective production makes it a compelling choice for the development of mRNA-based cancer therapies and vaccines against infectious diseases. The impurities generated during mRNA production can potentially impact the safety and efficacy of mRNA therapeutics, but their structural complexity has not been investigated in detail yet. This study pioneers a comprehensive profiling of IVT mRNA impurities, integrating current technologies with innovative analytical tools. We have developed highly reproducible, efficient, and stability-indicating ion-pair reversed-phase liquid chromatography and capillary gel electrophoresis methods to determine the purity of mRNA from different suppliers. Furthermore, we introduced the applicability of microcapillary electrophoresis for high-throughput (<1.5 min analysis time per sample) mRNA impurity profiling. Our findings revealed that impurities are mainly attributed to mRNA variants with different poly(A) tail lengths due to aborted additions or partial hydrolysis and the presence of double-stranded mRNA (dsRNA) byproducts, particularly the dsRNA 3'-loop back form. We also implemented mass photometry and native mass spectrometry for the characterization of mRNA and its related product impurities. Mass photometry enabled the determination of the number of nucleotides of different mRNAs with high accuracy as well as the detection of their size variants [i.e., aggregates and partial and/or total absence of the poly(A) tail], thus providing valuable information on mRNA identity and integrity. In addition, native mass spectrometry provided insights into mRNA intact mass, heterogeneity, and important sequence features such as poly(A) tail length and distribution. This study highlights the existing bottlenecks and opportunities for improvement in the analytical characterization of IVT mRNA, thus contributing to the refinement and streamlining of mRNA production, paving the way for continued advancements in biotechnological applications.
Asunto(s)
Cromatografía de Fase Inversa , Nucleótidos , ARN Mensajero/genética , Espectrometría de Masas/métodos , Fotometría , Cromatografía Líquida de Alta Presión/métodos , Contaminación de MedicamentosRESUMEN
Factor VIII and IX clotting factor concentrates manufactured from pooled plasma have been identified as potent sources of virus infection in persons with hemophilia (PWHs) in the 1970s and 1980s. To investigate the range and diversity of viruses over this period, we analysed 24 clotting factor concentrates for several blood-borne viruses. Nucleic acid was extracted from 14 commercially produced clotting factors and 10 from nonremunerated donors, preserved in lyophilized form (expiry dates: 1974-1992). Clotting factors were tested by commercial and in-house quantitative PCRs for blood-borne viruses hepatitis A, B, C and E viruses (HAV, HBV, HCV, HEV), HIV- types 1/2, parvoviruses B19V and PARV4, and human pegiviruses types 1 and 2 (HPgV-1,-2). HCV and HPgV-1 were the most frequently detected viruses (both 14/24 tested) primarily in commercial clotting factors, with frequently extremely high viral loads in the late 1970s-1985 and a diverse range of HCV genotypes. Detection frequencies sharply declined following introduction of virus inactivation. HIV-1, HBV, and HAV were less frequently detected (3/24, 1/24, and 1/24 respectively); none were positive for HEV. Contrastingly, B19V and PARV4 were detected throughout the study period, even after introduction of dry heat treatment, consistent with ongoing documented transmission to PWHs into the early 1990s. While hemophilia treatment is now largely based on recombinant factor VIII/IX in the UK and elsewhere, the comprehensive screen of historical plasma-derived clotting factors reveals extensive exposure of PWHs to blood-borne viruses throughout 1970s-early 1990s, and the epidemiological and manufacturing parameters that influenced clotting factor contamination.
Asunto(s)
Factores de Coagulación Sanguínea , Patógenos Transmitidos por la Sangre , Humanos , Patógenos Transmitidos por la Sangre/aislamiento & purificación , Infecciones de Transmisión Sanguínea/epidemiología , Infecciones de Transmisión Sanguínea/virología , Contaminación de Medicamentos , Historia del Siglo XX , Hemofilia A , Virus/clasificación , Virus/aislamiento & purificación , Virus/genética , Reacción en Cadena de la Polimerasa , Factor VIII , Factores de TiempoRESUMEN
This review covers the know-how of the Grupo de Química Analítica e Quimiometria regarding the analysis of fatty acids by capillary electrophoresis acquired over its 20 years of existence. Therefore, the fundamentals, advantages, and applications of this technique for analyzing different fatty acids in samples such as food, oils, cosmetics, and biological matrices are presented and discussed. Capillary electrophoresis is, thus, shown as an interesting and valuable separation technique for the target analysis of these analytes as an alternative to the gas chromatography coupled to flame ionization detection, as it offers advantages over the latter such as low analysis times, low sample and reagent consumption, the use of a nondedicated column, and simpler sample preparation. In addition, the methods shown in this literature review can be useful for quality control, adulteration, and health-related research by regulatory agencies.
Asunto(s)
Electroforesis Capilar , Ácidos Grasos , Ácidos Grasos/análisis , Electroforesis Capilar/métodos , Cromatografía de Gases/métodos , Aceites , Contaminación de MedicamentosRESUMEN
BACKGROUND AND OBJECTIVES: We evaluated the operational and safety impact of implementing anaerobic culture screening of apheresis and pooled platelets at the American Red Cross on the already established use of the aerobic culture screening of each donation performed no sooner than 24 h following collection. MATERIALS AND METHODS: Platelets were screened for bacterial contamination with the BACT/ALERT 3D® (bioMérieux, Durham, NC) microbial detection testing system. The addition of anaerobic culture to the already existing aerobic culture resulted in sampling an additional 8-10 mL from each donation. RESULTS: Implementation of anaerobic testing resulted in an approximate 3.5-fold increased rate of False Positive BACT/ALERT alarms. There was a modest increase in the rate of True Positive alarms of 1.4-fold with increased detection of Klebsiella and Propionibacterium species, including Cutibacterium acnes. In addition, there was an approximate 3.5-fold increase rate of False Positives and a 13.5-fold increase rate of Indeterminates, the majority (~57%) were due to Cutibacterium acnes. The combined costs and lost revenue associated with adding anaerobic screening increased by ~$1,000,000/year due to testing cost and product discards. CONCLUSION: The addition of anaerobic culture to aerobic culture to the original donation (without the introduction of sampling delay) resulted in a significant increase in the rate of alerts. The 40% increased rate of True Positive alarms may have modestly improved platelet safety. However, there was a disproportionate increase in the rate of False Positive and Indeterminate bacterial culture alarms, which added substantial cost and overall loss of platelet products.
Asunto(s)
Eliminación de Componentes Sanguíneos , Plaquetas , Humanos , Anaerobiosis , Plaquetas/microbiología , Bacterias , Contaminación de Medicamentos , Técnicas BacteriológicasRESUMEN
Saffron, the stigma of Crocus sativus L., is the most expensive spice used for culinary, medicinal, dye, and cosmetics purposes. It is highly adulterated because of its limited production and high commercial value. In this study, 104 saffron market samples collected from 16 countries were tested using morphology, high-performance liquid chromatography (HPLC), high-performance thin-layer chromatography (HPTLC), and deoxyribonucleic acid (DNA) barcoding. Overall, 45 samples (43%) were adulterated. DNA barcoding identified the highest number of adulterated saffron (44 samples), followed by HPTLC (39 samples), HPLC (38 samples), and morphology (32 samples). Only DNA barcoding identified the adulterated samples containing saffron and other plants' parts as bulking agents. In addition, DNA barcoding identified 20 adulterant plant species, which will help develop quality control methods and market surveillance. Some of the adulterant plants are unsafe for human consumption. The HPLC method helped identify the saffron samples adulterated with synthetic safranal. HPLC and HPTLC methods will help identify the samples adulterated with other parts of the saffron plant (auto-adulteration).
Asunto(s)
Crocus , Humanos , Crocus/genética , Crocus/química , Cromatografía Líquida de Alta Presión , Cromatografía en Capa Delgada , Código de Barras del ADN Taxonómico , Contaminación de Medicamentos , Plantas/genéticaRESUMEN
OBJECTIVES: Severe coagulopathy due to consumption of synthetic cannabinoids adulterated with brodifacoum, a long-acting anticoagulant, is an emerging worldwide hazard. Here, we review the spectrum of imaging findings in adulterated cannabinoid poisoning. MATERIALS AND METHODS: In this retrospective study, we used the Israeli Poison Information Center database to identify patients with cannabinoid-associated coagulopathy who presented to the Rambam Health Care Campus, where most patients were treated during an outbreak in northern Israel between September 2021 and June 2022. All relevant imaging studies for these patients were reviewed. We estimated the sensitivity of findings for cannabinoid-associated coagulopathy. Associations between a continuous variable and a dichotomous outcome were assessed with the Mann-Whitney U test. RESULTS: We identified 48 patients (mean age 40 years ± 9 [SD], 43 males) with 54 hospitalizations due to cannabinoid-associated coagulopathy. Symptomatic hemorrhage was documented in 50 (93%) cases at presentation, most of whom (78%) had hemorrhage from multiple systems. The most common bleeding site was the genitourinary collecting system, with a characteristic sign of suburothelial bleeding in 16/18 of performed abdominal CTs (sensitivity 89% [CI 65-99%] for cannabinoid-associated coagulopathy). Intramural bowel hematomas were noted in 70% (7/10) of CTs of patients with gastrointestinal bleeding. Incidental bleeding sites were identified on imaging in 24% of patients. An increased number of bleeding sites was associated with need for vasopressors (difference in bleeding sites 3.00 [95% CI 0.99-4.00], p = 0.026). CONCLUSION: CT plays a key role in the diagnosis and work-up of adulterated cannabinoid-associated coagulopathy. Characteristic signs include suburothelial hemorrhage and intramural bowel hematomas. CLINICAL RELEVANCE STATEMENT: Recognition of radiological signs of adulterated synthetic cannabinoid-associated coagulopathy is critical for optimizing outbreak control on the public health level and ensuring timely treatment on the individual patient level. KEY POINTS: ⢠Severe coagulopathy due to consumption of synthetic cannabinoids adulterated with brodifacoum, a long-acting anticoagulant, is an emerging worldwide threat. ⢠Characteristic imaging signs include suburothelial bleeding, intramural bowel hematomas, and rare incidental bleeding sites. ⢠Imaging has a pivotal role in optimizing outbreak control and ensuring timely and appropriate treatment.
Asunto(s)
4-Hidroxicumarinas , Cannabinoides , Humanos , Masculino , Adulto , Femenino , Cannabinoides/envenenamiento , Estudios Retrospectivos , 4-Hidroxicumarinas/envenenamiento , Israel/epidemiología , Persona de Mediana Edad , Tomografía Computarizada por Rayos X , Contaminación de Medicamentos , Anticoagulantes/envenenamiento , Trastornos de la Coagulación Sanguínea/inducido químicamenteRESUMEN
OBJECTIVE: This research aims to elucidate critical impurities in process validation batches of tacrolimus injection formulations, focusing on identification and characterization of previously unreported impurity at RRT 0.42, identified as the tacrolimus alcohol adduct. The potential root causes for the formation of new impurity was determined using structured risk assessment by cause and effect fishbone diagram. The primary objective was to propose mitigation plan and demonstrate the control of impurities with 6 month accelerated stability results in development batches. METHODS: The investigation utilizes method validation and characterization studies to affirm the accuracy of quantifying the tacrolimus alcohol adduct. The research methodology employed different characterization techniques like rotational rheometer, ICPâMS, MALDI-MS, 1H NMR, 13C NMR, and DEPT-135 NMR for structural elucidation. Additionally, the exact mass of the impurity is validated using electrospray ionization mass spectra. RESULTS: Results indicate successful identification and characterization of the tacrolimus alcohol adduct. The study further explores the transformation of Tacrolimus monohydrate under various conditions, unveiling the formation of Tacrolimus hydroxy acid and proposing the existence of a novel degradation product, the Tacrolimus alcohol adduct. Six-month data from development lots utilizing Manufacturing Process II demonstrate significantly lower levels of alcohol adducts. CONCLUSIONS: Manufacturing Process II, selectively locates Tacrolimus within the micellar core of HCO-60, this prevent direct contact of ethanol with Tacrolimus which minimizes impurity alcohol adduct formation. This research contributes to the understanding of tacrolimus formulations, offering ways to safeguard product integrity and stability during manufacturing and storage.
Asunto(s)
Contaminación de Medicamentos , Inmunosupresores , Tacrolimus , Contaminación de Medicamentos/prevención & control , Tacrolimus/química , Tacrolimus/análisis , Inmunosupresores/química , Inmunosupresores/análisis , Estabilidad de Medicamentos , Alcoholes/química , Alcoholes/análisis , Composición de Medicamentos/métodos , Espectroscopía de Resonancia Magnética/métodosRESUMEN
RATIONALE: Lomefloxacin hydrochloride ear drops are highly unstable to light and prone to produce photodegradation impurities. These impurities might be related to the phototoxicity of lomefloxacin, which could seriously threaten the health of patients. In this article, the photodegradation impurity profile in lomefloxacin hydrochloride ear drops was studied for further improvement of quality control of the drug. METHODS: By studying the chromatographic behavior of photodegradation impurities, the photodegradation impurities in lomefloxacin hydrochloride ear drops were separated and detected effectively. Liquid chromatography combined with ion trap/time-of-flight mass spectrometry was applied to characterize the structures of the photodegradation impurities in lomefloxacin hydrochloride ear drops. RESULTS: The structures of 17 impurities in lomefloxacin hydrochloride ear drops were elucidated based on high-resolution MSn data in positive ion mode, 12 of them being unknown impurities. CONCLUSIONS: The structural characteristics and fragmentation patterns of the photodegradation impurities were also studied. The study of the photodegradation impurity profile in lomefloxacin hydrochloride ear drops provides a scientific basis for quality control of these ear drops and ensures the safety of drug use by the public.
Asunto(s)
Contaminación de Medicamentos , Fluoroquinolonas , Humanos , Fotólisis , Cromatografía Liquida/métodos , Cromatografía de Gases y Espectrometría de Masas , Cromatografía Líquida de Alta Presión/métodosRESUMEN
RATIONALE: Cloxacillin and flucloxacillin are prone to degradation and polymerization in humid and hot environments, and their polymers have long been recognized to trigger allergic manifestations. A series of the degradation and polymerized impurities in cloxacillin and flucloxacillin were separated and characterized to ensure safe use of these drugs by the public. METHODS: By studying the chromatographic behavior of the degradation impurities and polymerized impurities in reversed-phase high-performance liquid chromatography (RP-HPLC) gradient elution, the impurities in cloxacillin and flucloxacillin were effectively separated and eluted. RP-HPLC tandem ion trap/time-of-flight mass spectrometry (MS) was applied to characterize the structures of unknown impurities eluted from the RP-HPLC methods for cloxacillin and flucloxacillin. The mechanisms of formation of the impurities in cloxacillin and flucloxacillin were also investigated. RESULTS: The structures of 10 unknown impurities in cloxacillin and 8 unknown impurities in flucloxacillin were elucidated based on the high-resolution MSn data at positive and negative modes, respectively. Six polymerized impurities were found and characterized, of which three were from the polymerization of cloxacillin and three were from the polymerization of flucloxacillin. CONCLUSIONS: The study on the impurity profiles of cloxacillin and flucloxacillin provided a scientific basis for improving their production processes and quality control.
Asunto(s)
Cloxacilina , Contaminación de Medicamentos , Floxacilina , Espectrometría de Masas en Tándem , Cloxacilina/química , Cloxacilina/análisis , Floxacilina/química , Floxacilina/análisis , Cromatografía Líquida de Alta Presión/métodos , Espectrometría de Masas en Tándem/métodosRESUMEN
Nitrosamine compounds pose a significant concern as potential carcinogens, prompting heightened scrutiny from regulatory bodies, particularly regarding their presence in pharmaceuticals. The detection of unacceptable levels of N-nitrosodiethylamine (NDMA) in ranitidine has led to widespread recalls, driving interest in alternative medications such as nizatidine, which shares a similar pharmacological class and is used to treat various gastrointestinal conditions. Despite fewer reports on NDMA levels in nizatidine, its structural similarity to ranitidine, characterized by a tertiary amine, underscores the potential for NDMA formation. Addressing the analytical challenges associated with nitrosamine detection, this study focuses on developing and validating an ultra-high pressure liquid chromatography triple quadrupole mass spectrometry (UHPLC-MS/MS) method for quantifying NDMA in both nizatidine active pharmaceutical ingredients and tablet formulations. Method validation adheres to International Council for Harmonisation recommendations, with a demonstrated linear range of 0.25-100 ng/mL for NDMA, exhibiting excellent linearity (regression coefficient >0.999) and efficient recovery rates ranging from 95.98% to 109.57%. The method shows high sensitivity, with limits of detection and quantification of 0.25 and 0.5 ng/mL, respectively. The developed UHPLC-MS/MS method offers a simple, precise, accurate, and selective approach for monitoring NDMA levels in nizatidine formulations available in Australia, promising enhanced sensitivity and specificity with limits of quantification in the ppb and sub-ppb ranges.
Asunto(s)
Carcinógenos , Contaminación de Medicamentos , Nitrosaminas , Nizatidina , Espectrometría de Masas en Tándem , Cromatografía Líquida de Alta Presión/métodos , Espectrometría de Masas en Tándem/métodos , Nizatidina/química , Nizatidina/análisis , Nitrosaminas/análisis , Nitrosaminas/química , Carcinógenos/análisis , Carcinógenos/química , Límite de Detección , Reproducibilidad de los Resultados , Dietilnitrosamina/análisis , Dietilnitrosamina/química , Modelos Lineales , Comprimidos/químicaRESUMEN
Cannabidiol (CBD) is the main non-psychoactive phytocannabinoid derived from Cannabis sativa L. It is now an active pharmaceutical ingredient (API), given its usage in treating some types of pediatric epilepsy. For this reason, this compound requires a deep characterization in terms of purity and origin. Previous research work has shown two impurities in CBD samples from hemp inflorescences, namely, cannabidivarin (CBDV) and cannabidibutol (CBDB), while abnormal-cannabidiol (abn-CBD) has been described as the primary by-product that is generated from CBD synthesis. Both natural and synthetic CBD samples exhibit the presence of Δ9-tetrahydrocannabinol (Δ9-THC) and Δ8-THC. This study aimed to develop a new analytical method based on high-performance liquid chromatography (HPLC) with different detection systems to study the purity of CBD and to define its origin based on the impurity profile. In addition to the above-mentioned cannabinoids, other compounds, such as cannabigerovarin (CBGV), cannabigerol (CBG), cannabichromevarin (CBCV), and cannabichromene (CBC), were examined as potential discriminating impurities. Qualitative and quantitative analyses were carried out by UHPLC-HRMS and HPLC-UV/Vis, respectively. Principal component analysis was applied for statistical exploration. Natural CBD samples exhibited purities ranging between 97.5 and 99.7%, while synthetic samples were generally pure, except for three initially labeled as synthetic, revealing natural-derived impurities. To further confirm the origin of CBD samples, the presence of other two minor impurities, namely cannabidihexol (CBDH) and cannabidiphorol (CBDP), was assessed as unequivocal for a natural origin. Finally, an enantioselective HPLC analysis was carried out and the results confirmed the presence of the (-)-trans enantiomer in all CBD samples. In conclusion, the HPLC method developed represents a reliable tool for detecting CBD impurities, thus providing a clear discrimination of the compound origin.
Asunto(s)
Cannabidiol , Contaminación de Medicamentos , Cromatografía Líquida de Alta Presión/métodos , Cannabidiol/análisis , Cannabis/química , Cannabinoides/análisis , Límite de DetecciónRESUMEN
BACKGROUND: Peucedani Radix, also known as "Qian-hu" is a traditional Chinese medicine derived from Peucedanum praeruptorum Dunn. It is widely utilized for treating wind-heat colds and coughs accompanied by excessive phlegm. However, due to morphological similarities, limited resources, and heightened market demand, numerous substitutes and adulterants of Peucedani Radix have emerged within the herbal medicine market. Moreover, Peucedani Radix is typically dried and sliced for sale, rendering traditional identification methods challenging. MATERIALS AND METHODS: We initially examined and compared 104 commercial "Qian-hu" samples from various Chinese medicinal markets and 44 species representing genuine, adulterants or substitutes, utilizing the mini barcode ITS2 region to elucidate the botanical origins of the commercial "Qian-hu". The nucleotide signature specific to Peucedani Radix was subsequently developed by analyzing the polymorphic sites within the aligned ITS2 sequences. RESULTS: The results demonstrated a success rate of 100% and 93.3% for DNA extraction and PCR amplification, respectively. Forty-five samples were authentic "Qian-hu", while the remaining samples were all adulterants, originating from nine distinct species. Peucedani Radix, its substitutes, and adulterants were successfully identified based on the neighbor-joining tree. The 24-bp nucleotide signature (5'-ATTGTCGTACGAATCCTCGTCGTC-3') revealed distinct differences between Peucedani Radix and its common substitutes and adulterants. The newly designed specific primers (PR-F/PR-R) can amplify the nucleotide signature region from commercial samples and processed materials with severe DNA degradation. CONCLUSIONS: We advocate for the utilization of ITS2 and nucleotide signature for the rapid and precise identification of herbal medicines and their adulterants to regulate the Chinese herbal medicine industry.