Proteomic analysis of Burkholderia zhejiangensis CEIB S4-3 during the methyl parathion degradation process.

Methyl parathion is an organophosphorus pesticide widely employed worldwide to control pests in agricultural and domestic environments. However, due to its intensive use, high toxicity, and environmental persistence, methyl parathion is recognized as an important ecosystem and human health threat, causing severe environmental pollution events and numerous human poisoning and deaths each year. Therefore, identifying and characterizing microorganisms capable of fully degrading methyl parathion and its degradation metabolites is a crucial environmental task for the bioremediation of pesticide-polluted sites. Burkholderia zhejiangensis CEIB S4-3 is a bacterial strain isolated from agricultural soils capable of immediately hydrolyzing methyl parathion at a concentration of 50 mg/L and degrading the 100% of the released p-nitrophenol in a 12-hour lapse when cultured in minimal salt medium. In this study, a comparative proteomic analysis was conducted in the presence and absence of methyl parathion to evaluate the biological mechanisms implicated in the methyl parathion biodegradation and resistance by the strain B. zhejiangensis CEIB S4-3. In each treatment, the changes in the protein expression patterns were evaluated at three sampling times, zero, three, and nine hours through the use of two-dimensional polyacrylamide gel electrophoresis (2D-PAGE), and the differentially expressed proteins were identified by mass spectrometry (MALDI-TOF). The proteomic analysis allowed the identification of 72 proteins with differential expression, 35 proteins in the absence of the pesticide, and 37 proteins in the experimental condition in the presence of methyl parathion. The identified proteins are involved in different metabolic processes such as the carbohydrate and amino acids metabolism, carbon metabolism and energy production, fatty acids ß-oxidation, and the aromatic compounds catabolism, including enzymes of the both p-nitrophenol degradation pathways (Hydroquinone dioxygenase and Hydroxyquinol 1,2 dioxygenase), as well as the overexpression of proteins implicated in cellular damage defense mechanisms such as the response and protection of the oxidative stress, reactive oxygen species defense, detoxification of xenobiotics, and DNA repair processes. According to these data, B. zhejiangensis CEIB S4-3 overexpress different proteins related to aromatic compounds catabolism and with the p-nitrophenol  degradation pathways, the higher expression levels observed in the two subunits of the enzyme Hydroquinone dioxygenase, suggest a preferential use of the Hydroquinone metabolic pathway in the p-nitrophenol degradation process. Moreover the overexpression of several proteins implicated in the oxidative stress response, xenobiotics detoxification, and DNA damage repair reveals the mechanisms employed by B. zhejiangensis CEIB S4-3 to counteract the adverse effects caused by the methyl parathion and p-nitrophenol exposure.

Electrochemical Organophosphorus Pesticide Detection Using Nanostructured Gold-Modified Electrodes.

In this study, nanostructured gold was successfully prepared on a bare Au electrode using the electrochemical deposition method. Nanostructured gold provided more exposed active sites to facilitate the ion and electron transfer during the electrocatalytic reaction of organophosphorus pesticide (methyl parathion). The morphological and structural characterization of nanostructured gold was conducted using field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD), which was further carried out to evaluate the electrocatalytic activity towards methyl parathion sensing. The electrochemical performance of nanostructured gold was investigated by electrochemical measurements (cyclic voltammetry (CV) and differential pulse voltammetry (DPV)). The proposed nanostructured gold-modified electrode exhibited prominent electrochemical methyl parathion sensing performance (including two linear concentration ranges from 0.01 to 0.5 ppm (R2 = 0.993) and from 0.5 to 4 ppm (R2 = 0.996), limit of detection of 5.9 ppb, excellent selectivity and stability), and excellent capability in determination of pesticide residue in real fruit and vegetable samples (bok choy and strawberry). The study demonstrated that the presented approach to fabricate a nanostructured gold-modified electrode could be practically applied to detect pesticide residue in agricultural products via integrating the electrochemical and gas chromatography coupled with mass spectrometry (GC/MS-MS) analysis.

Recombinant organophosphorus hydrolase (OPH) expression in E. coli for the effective detection of organophosphate pesticides.

Accumulation and exposure of organophosphate pesticides are of great concern today owing to their abundant usage and potential health hazards. Harmful effects of organophosphate pesticide exposure and limitations of the available treatment methods necessitate the development of reliable, selective, cost-effective, and sensitive methods of detection. We developed a novel biosensor based on the enzymatic action of recombinant organophosphorus hydrolase (OPH) expressed in E. coli. We report the development of colorimetric biosensors made of His-Nus-OPH as well as His-Nus-OPH loaded alginate microspheres. The colorimetric detection method developed using solution-phase and alginate-encapsulated His-Nus-OPH exhibited detection limits of 0.045 and 0.039 mM, respectively, for ethyl paraoxon, and 0.101 and 0.049 mM, respectively, for methyl parathion. Additionally, fluorescence measurement using pH-sensitive fluorescein isothiocyanate (FITC) was used to sense the quantity of organophosphorus pesticides. The fluorometric detection method using solution-phase His-Nus-OPH, with ethyl paraoxon and methyl parathion as the substrate, reveals the lower limit of detection as 0.014 mM and 0.044 mM, respectively. Our results demonstrate the viability of His-Nus-OPH for OP detection with good sensitivity, LOD, and linear range. We report the first use of N-terminal His-NusA-tagged OPH, which enhances solubility significantly and presents a significant advance for the scientific community.

MPH-GST sensing microplate for easy detection of organophosphate insecticides.

OBJECTIVE: To develop a convenient and efficient means for organophosphate (OP) insecticide detection, a simple, cost-effective, and easy-to-use absorbance-based sensing device was generated using methyl parathion hydrolase fused with glutathione-S-transferase (MPH-GST) covalently immobilized onto a chitosan film-coated microplate. RESULTS: With methyl parathion (MP) as a representative substrate, this MPH-GST sensing microplate had the detection limit of 0.1 µM and the linear range of 0.1-50 µM. Despite its highest stability at 4 °C, it was considerably stable at 25 °C with high activity for 30 days. It was also most stable at pH 8.0 and could be efficiently reused up to 100 rounds. The device revealed a high percentage of recovery for tap water spiked with a known concentration of MP, which was also comparable to the result obtained from gas chromatography-mass spectrometry. It also showed a high recovery of 82-100% with MP spiked agricultural products and satisfactory results with non-spiked samples. This immobilized enzyme sensing system was more sensitive and efficient than the whole cell system from our previous work. CONCLUSIONS: All of the advantages of the MPH-GST sensing microplate developed have rendered it suitable for rapid and convenient OP screening, and for being a bio-element for fabricating a potential optical biosensor in the future.

Graphene oxide@Ce-doped TiO2 nanoparticles as electrocatalyst materials for voltammetric detection of hazardous methyl parathion.

A sensitive voltammetric sensor has been developed for hazardous methyl parathion detection (MP) using graphene oxide@Ce-doped TiO2 nanoparticle (GO@Ce-doped TiO2 NP) electrocatalyst. The GO@Ce-doped TiO2 NPs were prepared through the sol-gel method and characterized by various physicochemical and electrochemical techniques. The GO@Ce-doped TiO2 NP-modified glassy carbon electrode (GCE) addresses excellent electrocatalytic activity towards MP detection for environmental safety and protection. The developed strategy of GO@Ce-doped TiO2 NPs at GCE surfaces for MP detection achieved excellent sensitivity (2.359 µA µM-1 cm-2) and a low detection limit (LOD) 0.0016 µM with a wide linear range (0.002 to 48.327 µM). Moreover, the fabricated sensor shows high selectivity and long-term stability towards MP detection; this significant electrode further paves the way for real-time monitoring of environmental quantitative samples with satisfying recoveries.

A dual-mode nanoprobe for the determination of parathion methyl based on graphene quantum dots modified silver nanoparticles.

We developed a highly sensitive and selective method for double-signal analysis (fluorescence and ultraviolet-visible spectrophotometry) of organophosphorus pesticides (OPs), based on reversible quenching of graphene quantum dots (GQDs; fluorophores) with silver nanoparticles (AgNPs; absorbers). We used acetylcholinesterase to catalytically convert acetylthiocholine into thiocholine. In turn, by competitive binding to the AgNPs, the produced thiocholine displaces AgNPs from the GQDs and thus induces fluorescence recovery. However, OP analytes inhibit the activity of acetylcholinesterase and, in so doing, retain the silver-graphene nanoparticle complex and fluorescence quenching. The degree of quenching is proportional to the concentration of OPs; the detection limit is as low as 0.017 µg/L. The ultraviolet-visible absorption of GQDs/AgNPs at 390 nm decreases-because of AgNP aggregation that occurs after desorption from the GQDs-and the absorbance is linearly proportional to the OP concentration. Our system has good selectivity to substances that are commonly present in water and vegetables. We successfully applied our method to OP analysis in water, apple, and carrot samples.

Highly Efficient Abiotic Assay Formats for Methyl Parathion: Molecularly Imprinted Polymer Nanoparticle Assay as an Alternative to Enzyme-Linked Immunosorbent Assay.

Enzyme-linked immunosorbent assay (ELISA) is a widely used standard method for sensitive detection of analytes of environmental, clinical, or biotechnological interest. However, ELISA has clear drawbacks related to the use of relatively unstable antibodies and enzyme conjugates and the need for several steps such as washing of nonbound conjugates and addition of dye reagents. Herein, we introduce a new completely abiotic assay where antibodies and enzymes are replaced with fluorescent molecularly imprinted polymer nanoparticles (nanoMIPs) and target-conjugated magnetic nanoparticles, which acted as both reporter probes and binding agents. The components of the molecularly imprinted polymer nanoparticle assay (MINA) are assembled in microtiter plates fitted with magnetic inserts. We have compared the performance of a new magnetic assay with molecularly imprinted polymer (MIP)-based ELISA for the detection of methyl parathion (MP). Both assays have shown high sensitivity toward allowing detection of MP at picomolar concentrations without any cross-reactivity against chlorpyriphos and fenthion. The fully abiotic assays were also proven to detect analyte in real samples such as tap water and milk. Unlike ELISA-based systems, the novel assay required no washing steps or addition of enzyme substrates, making it more user-friendly and suitable for high throughput screening.

Catalytic Chemosensing Assay for Selective Detection of Methyl Parathion Organophosphate Pesticide.

Herein, a catalytic chemosensing assay (CCA), based on a bimetallic complex, [RuII (bpy)2 (CN)2 ]2 (CuI I)2 (bpy=2,2'-bipyridine), is described. This complex integrates a task-specific catalyst (CuI -catalyst) and a signaling unit ([RuII (bpy)2 (CN)2 ]) to specifically hydrolyze methyl parathion, a highly toxic organophosphate (OP) pesticide. The bimetallic complex catalyzed the hydrolysis of the phosphate ester to generate o,o-dimethyl thiophosphate (DTP) anion and 4-nitrophenolate. Intrinsically, 4-nitrophenolate absorbed UV/Vis light at λmax =400 nm, creating the first level of the chemosensing signal. DTP interacted with the original complex to displace the chromophore, [RuII (bpy)2 (CN)2 ], which was monitored by spectrofluorometry; this was classified as the second level of chemosensing signal. By integrating both spectroscopic and spectrofluorometric signals with a simple AND logic gate, only methyl parathion was able to provide a positive response. Other aromatic and aliphatic OP pesticides (diazinon, fenthion, meviphos, terbufos, and phosalone) and 4-nitrophenyl acetate provided negative responses. Furthermore, owing to the metal-catalyzed hydrolysis of methyl parathion, the CCA system led to the detoxification of the pesticide. The CCA system also demonstrated its catalytic chemosensing properties in the detection of methyl parathion in real samples, including tap water, river water, and underground water.

Reduced graphene oxide nanosheets modified with nickel disulfide and curcumin nanoparticles for non-enzymatic electrochemical sensing of methyl parathion and 4-nitrophenol.

A method was designed for simultaneous voltammetric determination of methyl parathion pesticide (MP) and 4-nitrophenol (4-NP). Curcumin nanoparticles were deposited on reduced graphene oxide nanosheets that were modified with nickel disulfide. The material was placed on a screen-printed carbon electrode and then displayed high electrocatalytic activities toward MP and 4-NP, with a peak potential near -0.9 and - 0.7 V (vs. pseudo Ag/AgCl), respectively. Figures of merit include (a) good electrochemical sensitivities (7.165 and 6.252 µA·µM-1·cm-2), (b) wide linear ranges (from 0.25 to 80 µM), (c) low limits of detection (8.7 and 6.9 nM at S/N = 3) for MP and 4-NP, respectively, and (d) good selectivity, repeatability, reproducibility, and storage stability. The method was applied in the determination of MP and 4-NP in tomato and apple juices and spiked river water. Graphical abstract A novel electrocatalysis platform based on reduced graphene oxide-nickel disulfide nanosheets decorated with curcumin nanoparticles for simultaneous quantification of methyl parathion and 4-nitrophenol in various vegetarian juices and water samples.

Preparation of an acryloyl ß-cyclodextrin-silica hybrid monolithic column and its application in pipette tip solid-phase extraction and HPLC analysis of methyl parathion and fenthion.

An acryloyl ß-cyclodextrin-silica hybrid monolithic column for pipette tip solid-phase extraction and high-performance liquid chromatography determination of methyl parathion and fenthion has been prepared through a sol-gel polymerization method. The synthesis conditions, including the volume of cross-linker and the ratio of inorganic solution to organic solution, were optimized. The prepared monolithic column was characterized by thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The eluent type, volume and flow rate, sample volume, flow rate, acidity, and ionic strength were optimized in detail. Under the optimized conditions, a simple and sensitive pipette tip solid-phase extraction with high-performance liquid chromatography method was developed for the determination of methyl parathion and fenthion in lettuce. The method yielded a linear calibration curve in the concentration ranges of 15-400 µg/kg for methyl parathion and 20-400 µg/kg for fenthion with correlation coefficients of above 0.9957. The limits of detection were 4.5 µg/kg for methyl parathion and 6.0 µg/kg for fenthion, respectively. The recoveries of methyl parathion and fenthion spiked in lettuce ranged from 96.0 to 104.2% with relative standard deviations less than 8.4%.

Characterization of methyl parathion degradation by a Burkholderia zhejiangensis strain, CEIB S4-3, isolated from agricultural soils.

Through the use of an enrichment technique, we isolated from the agricultural soils of Morelos in central México a strain of Burkholderia zhejiangensis identified as CEIB S4-3, it's could use the pesticide methyl parathion (MP) as the only source of carbon and degrade completely p-nitrophenol (PNP). For more efficient MP and PNP degradation by the CEIB S4-3 strain, the absence of an extra carbon source, a large inoculum and an MP concentration up to 50 mg/l are required. Sequence and annotation analysis of the draft genome, showed presence of mpd functional gene, which was expressed and its activity on the MP was confirmed. Additionally, the genes coding for enzymes in the benzoquinone pathway (conducted by Gram-negative bacteria) and the benzenotriol pathway (conducted by Gram-positive bacteria) were found, which was corroborated by identification of intermediary metabolites by HPLC. Thus, we propose that B. zhejiangensis CEIB S4-3 uses both degradation pathways.

Production and characterization of a biotinylated single-chain variable fragment antibody for detection of parathion-methyl.

In this article, we reported the development of a biotinylated single-chain variable fragment (scFv) antibody based indirect competitive enzyme-linked immunosorbent assay (IC-ELISA) for parathion-methyl (PM) detection. Firstly, a phage display library was generated using a pre-immunized BALB/C mouse against a specific hapten of PM. After four rounds of panning, the scFv gene fragments were transferred into a secreted expression vector. Then, the scFv antibodies were secreted expressed and screened by IC-ELISA against PM. The selected scFv antibody was fused with a biotin acceptor domain (BAD) and inserted into pET-28a(+) vector for high-level expression in Escherichia coli BL2 (DE3). After optimizing expression conditions, the scFv-BAD antibody was expressed as a soluble protein and biotinylated in vitro by the E. coli biotin ligase (BirA). Subsequently, the biotinylated scFv-BAD antibody was purified with a high yield of 59.2 ± 3.7 mg/L of culture, and was characterized by SDS-PAGE and western blotting. Finally, based on the biotinylated scFv-BAD, a sensitive IC-ELISA for detection of PM was developed, and the 50% inhibition value (IC50) of PM was determined as 14.5 ng/mL, with a limit of detection (LOD, IC10) of 0.9 ng/mL. Cross-reactivity (CR) studies revealed that the scFv antibody showed desirable specificity for PM.

Biosensitive element in the form of immobilized luminescent photobacteria for detecting ecotoxicants in aqueous flow-through systems.

We demonstrated the possibility of long-term and efficient application of a biosensitive element (BE) in the form of Photobacterium phosphoreum photobacteria immobilized in poly(vinyl alcohol) (PVA) cryogel for detecting various ecotoxicants (Zn(2) (+) , Cu(2) (+) , Hg(2) (+) , Pb(2) (+) , 2,4-dichlorophenoxyacetic acid, 2,6-dimethylphenol, pentachlorophenol, coumaphos, malathion, chlorpyrifos and methyl parathion) in flow-through media. The range of detectable concentrations of ecotoxicants was determined at 1 × 10(-8) to 1 × 10(-4) M for heavy metal ions and at 1 × 10(-8) to 1 × 10(-5) M for phenol derivatives and organophosphorus pesticides. Immobilized cells of photobacteria quantitatively reacted with these ecotoxicants; cell sensitivity exhibited no flow rate dependence in the range from 45 to 180 mL/h. At a constant concentration of ecotoxicant in the flow, the bioluminescence quenching profile of immobilized cells demonstrated an integral response. The BE could remain in a flow-through medium for at least 10 days while retaining 95% of luminescent activity in the absence of ecotoxicants. The BE tested in this work was demonstrated to have a long shelf life (> 60 weeks) at -80°C without changes in the baseline level of bioluminescence. Copyright © 2016 John Wiley & Sons, Ltd.

Chemiluminescence reaction kinetics-resolved multianalyte immunoassay strategy using a bispecific monoclonal antibody as the unique recognition reagent.

The multianalyte immunoassay (MIA) has attracted increasing attention due to its high sample throughput, short assay time, low sample consumption, and reduced overall cost. However, up to now, the reported MIA methods commonly require multiple antibodies since each antibody can recognize only one antigen. Herein, a novel bispecific monoclonal antibody (BsMcAb) that could bind methyl parathion and imidacloprid simultaneously was produced by a hybrid hybridomas strategy. A chemiluminescence (CL) reaction kinetics-resolved strategy was designed for MIA of methyl parathion and imidacloprid using the BsMcAb as the unique recognition reagent. Horseradish peroxidase (HRP) and alkaline phosphatase (ALP) were adopted as the signal probes to tag the haptens of the two pesticides due to their very different CL kinetic characteristics. After competitive immunoreactions, the HRP-tagged methyl parathion hapten and the ALP-tagged imidacloprid hapten were simultaneously bound to the BsMcAb since there were two different antigen-binding sites in it. Then, two CL reactions were simultaneously triggered by adding the CL coreactants, and the signals for methyl parathion and imidacloprid detections were collected at 0.6 and 1000 s, respectively. The linear ranges for methyl parathion and imidacloprid were both 1.0-500 ng/mL, with detection limits of 0.33 ng/mL (S/N = 3). The proposed method was successfully used to detect pesticides spiked in ginseng and American ginseng with acceptable recoveries of 80-118%. This proof-of-principle work demonstrated the feasibility of MIA using only one antibody.

A smartphone-readable barcode assay for the detection and quantitation of pesticide residues.

In this paper, we present a smartphone-readable barcode assay for the qualitative detection of methyl parathion residues, a toxic organophosphorus pesticide that is popularly used in agriculture worldwide. The detection principle is based on the irreversible inhibition of the enzymatic activity of acetylcholinesterase (AchE) by methyl parathion; AchE catalytically hydrolyzes acetylthiocholine iodine to thiocholine that in turn dissociates dithiobis-nitrobenzoate to produce a yellow product (deprotonated thio-nitrobenzoate). The yellow intensity of the product was confirmed to be inversely dependent on the concentration of the pesticide. We have designed a barcode-formatted assay chip by using a PDMS (polydimethylsiloxane) channel plate (as the reaction reservoir), situated under a printed partial barcode, to complete the whole barcode such that it can be directly read by a barcode scanning app installed on a smartphone. The app is able to qualitatively present the result of the pesticide test; the absence or a low concentration of methyl parathion results in the barcode reading as "-", identifying the test as negative for pesticides. Upon obtaining a positive result (the app reads a "+" character), the captured image can be further analyzed to quantitate the methyl parathion concentration in the sample. Besides the portability and simplicity, this mobile-app based colorimetric barcode assay compares favorably with the standard spectrophotometric method.

A novel electrochemical sensor based on zirconia/ordered macroporous polyaniline for ultrasensitive detection of pesticides.

A simple and mild strategy was proposed to develop a novel electrochemical sensor based on zirconia/ordered macroporous polyaniline (ZrO2/OMP) and further used for the detection of methyl parathion (MP), one of the organophosphate pesticides (OPPs). Due to the strong affinity of phosphate groups with ZrO2 and the advantages of OMP such as high catalytic activity and good conductivity, the developed sensor showed a limit of detection as low as 2.28 × 10(-10) mol L(-1) (S/N = 3) by square-wave voltammograms, and good selectivity, acceptable reproducibility and stability. Most importantly, this novel sensor was successfully applied to detect MP in real samples of apple and cabbage. It is expected that this method has potential applications in electrochemical sensing platforms with simple, sensitive, selective and fast analysis.

Combining 3-D plasmonic gold nanorod arrays with colloidal nanoparticles as a versatile concept for reliable, sensitive, and selective molecular detection by SERS.

The detection of molecules at an ultralow level by Surface-Enhanced Raman Spectroscopy (SERS) has recently attracted enormous interest for various applications especially in biological, medical, and environmental fields. Despite the significant progress, SERS systems are still facing challenges for practical applications related to their sensitivity, reliability, and selectivity. To overcome these limitations, in this study, we have proposed a simple yet facile concept by combining 3-D anisotropic gold nanorod arrays with colloidal gold nanoparticles having different shapes for highly reliable, selective, and sensitive detection of some hazardous chemical and biological warfare agents in trace amounts through SERS. The gold nanorod arrays were created on the BK7 glass slides or silicon wafer surfaces via the oblique angle deposition (OAD) technique without using any template material or lithography technique and their surface densities were adjusted by manipulating the deposition angle (α). It is found that gold nanorod arrays fabricated at α = 10° exhibited the highest SERS enhancement in the absence of colloidal gold nanoparticles. Synergetic enhancement was obviously observed in SERS signals when combining gold nanorod arrays with colloidal gold nanoparticles having different shapes (i.e., spherical, rod, and cage). Due to their ability to produce localized surface plasmons (LSPs) in transverse and longitudinal directions, utilization of colloidal gold nanorods as a synergetic agent led to an increase in the enhancement factor by about tenfold compared to plain gold nanorod arrays. Moreover, we have tested our approach to detect some chemical and biological toxins namely dipicolinic acid (DIP), methyl parathion (MP), and diethyl phosphoramidate (DP). For all toxins, Raman spectra with high signal-to-noise ratios and reproducibility were successfully obtained over a broad concentration range (5 ppm-10 ppb). Our results suggest that the slightly tangled and closely-packed anisotropic gold nanorod arrays reinforced by the gold nanoparticles may serve as an ideal SERS substrate to detect any analyte in trace amounts.

Zr-based metalloporphyrin MOF probe for electrochemical detection of parathion-methyl.

An electrochemical (EC) sensor based on metalloporphyrin metal-organic framework (MOF) for the detection of parathion-methyl (PM) has been developed. The prepared MOF-525(Fe) exhibits great signal enhancement toward the electrochemical detection of PM owing to its unique structural properties and electrochemical activities. Under optimal experimental conditions, the as-prepared MOF-525(Fe) based EC sensor exhibited excellent PM sensing performance with a wide linear detection range (0.1 µM-100 µM) and low limit of detection (LOD, 1.4 nM). Compared to its corresponding Fe metalloporphyrin (linker), MOF-525(Fe) exhibited a superior sensitivity (28.31 µA cm-2·µM-1), which is 3.7 times higher than the sensitivity of FeTCPP linker (7.56 µA cm-2·µM-1) towards PM. The improved performance is associated with the high specific surface area and the large pore channels of MOF-525(Fe) facilitating a better interaction between PM and the Fe metalloporphyrin active sites, especially in the lower concentration range. Moreover, a possible affinity of the PM molecules toward Zr6 clusters may also contribute to the selective enrichment of PM on MOF-525(Fe). This EC sensor further demonstrated high selectivity in the presence of interfering molecules. The recovery results further confirm accurate PM sensing in actual samples, which suggests promising applications for the rapid detection of environmental organophosphates by metalloporphyrin MOFs.

Electrochemical sensor for effective detection of methyl parathion applying multidimensional MXene/CNHs/PPy nanocomposite to synergistically immobilize acetylcholinesterase.

In this study, a novel acetylcholinesterase (AChE)-based electrochemical sensor was successfully constructed using two-dimensional MXene, carbon nanohorns (CNHs) and polypyrrole (PPy) as the substrate material for the detection of methyl parathion (MP) residue. The multidimensional MXene/CNHs composite, formed through electrostatic self-assembly, provided a high specific surface area and excellent conductivity. With an active surface area of 0.1062 cm2, the composite provided numerous electroactive sites for AChE immobilization and facilitated electron diffusion at the sensing interface, amplifying the electrochemical signals. Additionally, polypyrrole (PPy) improved AChE adhesion on the electrode surface, further enhancing the stability of the sensor. The proposed sensor exhibited a wide linear range (0.002-346 ng mL-1) and low detection limit (0.00021 ng mL-1) for MP. This study offers an innovative strategy to detect MP, showcasing the potential of two-dimensional materials in electrochemical sensing.

A novel phosphotriesterase hybrid nanoflower-hydrogel sensor equipped with a smartphone detector for real-time on-site monitoring of organophosphorus pesticides.

Designing efficient and rapid methods for the detection of organophosphorus pesticides (OPs) residue is a prerequisite to mitigate their negative health impacts. In this study, we propose the concept of an enzyme catalysis system-based hydrogel kit integrated with a smartphone detector for in-field screening of OPs. Here, we rapidly prepared phosphotriesterase hybrid nanoflowers (PTE-HNFs) using a self-assembly strategy by adding external energy and embedded the nanocomposite in sodium alginate (SA) hydrogel to construct a target-responsive hydrogel kit. The color response of the kit is induced by catalyzing methyl parathion (MP) to produce p-nitrophenol. For on-site quantification, the color variations of the portable kit are converted into digital information through a smartphone, which exhibits an applicable linear range towards OPs. The hydrogel sensing platform demonstrates a wide linear range (1-150 µM) and low detection limit (0.15 µM) for MP while maintaining high reliability, excellent long-term stability, and ease of operation. Overall, the PTE-HNFs-based SA hydrogel kit provides a useful strategy for simple and sensitive detection of MP and holds great potential for applications in detecting OPs in food and environmental water.