Amelioration of tableting properties and dissolution rate of naproxen co-grinded with nicotinamide: preparation and characterization of co-grinded mixture.

OBJECTIVE AND SIGNIFICANCE: Reducing the dimensions, when other additives are present, shows potential as a method to improve the dissolution and solubility of biopharmaceutical classification system class II drugs that have poor solubility. In this investigation, the process involved grinding naproxen with nicotinamide with the aim of improving solubility and the rate of dissolution. METHODS: Naproxen was subjected to co-milling with urea, dimethylurea, and nicotinamide using a planetary ball mill for a duration of 90 min, maintaining a 1:1 molar ratio for the excipients (screening studies). The co-milled combinations, naproxen in its pure milled form, and a physical mixture were subjected to analysis using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), and solubility assessment. The mixture displaying the highest solubility (naproxen-nicotinamide) was chosen for further investigation, involving testing for intrinsic dissolution rate (IDR) and Fourier-transform infrared spectroscopy (FTIR) after co-milling for both 90 and 480 min. RESULTS AND CONCLUSION: The co-milled combination, denoted as S-3b and consisting of the most substantial ratio of nicotinamide to naproxen at 1:3, subjected to 480 min of milling, exhibited a remarkable 45-fold increase in solubility and a 9-fold increase in IDR. XRPD analysis of the co-milled samples demonstrated no amorphization, while SEM images portrayed the aggregates of naproxen with nicotinamide. FTIR outcomes negate the presence of any chemical interactions between the components. The co-milled sample exhibiting the highest solubility and IDR was used to create a tablet, which was then subjected to comprehensive evaluation for standard attributes. The results revealed improved compressibility and dissolution properties.

Prediction of CYP-mediated silybin A-losartan pharmacokinetic interactions using physiological based pharmacokinetic modeling.

The concomitant use of herbal products and synthetic drugs necessitates the assessment of their interaction potentials. The herbal hepatoprotective medicine, silybin A inhibits cytochrome P450 (CYP) 2C9 and 3A4 enzymes, thus, may interact with the drugs that are substrates of CYP2C9 and 3A4, such as losartan. The three most prominent genotypes, expressed by CYP2C9 are the CYP2C9*1/*1, CYP2C9*1/*2 and CYP2C9*1/*3. This study aimed to assess silybin A-losartan interaction in different CYP2C9 genotypes using physiological-based pharmacokinetic (PBPK) model approach. The individual PBPK models for silybin A and losartan were developed using PK-Sim®. Losartan pharmacokinetics was predicted with or without co-administration of silybin A in individuals of different CYP2C9 genotypes to find herbal-drug interaction. The predicted drug plasma curves and pharmacokinetic parameters were optimized using parameter identification tool and were compared with reported pharmacokinetic parameters from the published clinical studies for model validation. The silybin-losartan interactions were predicted by change in area under the curve (AUC) and peak systemic concentration (Cmax). The co-treatment of silybin A, 420 mg/24 h (140 mg/8 h) with losartan 50 mg/24 h, exhibited a genotype-dependent change in the losartan's AUC and Cmax. In CYP 2C9*1/*1 genotype, AUC and Cmax of losartan were increased 1.16 and 1.37 folds, respectively falling in a range stipulated for negligible interaction. Increase in AUC and Cmax by 0.873 and 0.294 folds, respectively in CYP2C9*1/*3 after co-administration of silybin A exhibited a minor interaction with losartan. However, in individuals with CYP2C9*1/*2 genotype, the losartan's AUC and Cmax were decreased by 0.01 folds, manifesting a moderate interaction. Hence, in CYP2C9*1/*1 and CYP2C9*1/*3 genotypes, silybin A is a weak CYP inhibitor for losartan while in CYP2C9*1/*2 genotype, the co-administration of silybin consequents into a moderate pharmacokinetic interaction with losartan.

Assessment of Binary Agarose-Carbopol Buccal Gels for Mucoadhesive Drug Delivery: Ex Vivo and In Vivo Characterization.

Agarose (AG) is a naturally occurring biocompatible marine seaweed extract that is converted to hydrocolloid gel in hot water with notable gel strength. Currently, its mucoadhesion properties have not been fully explored. Therefore, the main aim of this study was to evaluate the mucoadhesive potential of AG binary dispersions in combination with Carbopol 934P (CP) as mucoadhesive gel preparations. The gels fabricated via homogenization were evaluated for ex vivo mucoadhesion, swelling index (SI), dissolution and stability studies. The mucoadhesive properties of AG were concentration dependent and it was improved by the addition of CP. Maximum mucoadhesive strength (MS) (27.03 g), mucoadhesive flow time (FT) (192.2 min), mucoadhesive time in volunteers (MT) (203.2 min) and SI (23.6% at 4 h) were observed with formulation F9. The mucoadhesive time investigated in volunteers (MT) was influenced by AG concentration and was greater than corresponding FT values. Formulations containing 0.3%, w/v AG (F3 and F9) were able to sustain the release (~99%) for both drugs till 3 h. The optimized formulation (F9) did not evoke any inflammation, irritation or pain in the buccal cavity of healthy volunteers and was also stable up to 6 months. Therefore, AG could be considered a natural and potential polymer with profound mucoadhesive properties to deliver drugs through the mucosal route.

Simultaneous quantification of sumatriptan succinate and prochlorperazine maleate in orodispersible films using two validated UV-spectroscopic methods.

The study aimed at simultaneous quantification of sumatriptan succinate (SUM) and prochlorperazine maleate (PCP) in an orodispersible film using two validated spectroscopic methods viz. simultaneous equation (Method I) and the Q-absorption ratio (Method II). The Method I involved measurement of absorbances at λmax of both drugs while in Method II, absorbances were measured at isosbestic wavelength and λmax of one of the two components. Method validation were accomplished as per the ICH guidelines. A 1:1 mixture of the drugs and an orodispersible film (ODF) containing these drugs were assayed by both methods. The absorbance data of SUM and PCP in both methods were linear at respective wavelengths with correlation coefficient values >0.995. Both methods were precise as % RSD in repeatability, interday and intraday precision was less than 2. The estimation of SUM and PCP from the film dosage form by method I was104.74% and 98.34% and by method II was 103.45% and 98.85%, respectively, with a standard deviation <2. The study concluded that both the methods were simple, reliable and robust and can be applied successfully for the simultaneous quantification of SUM and PCP in mixture and orodispersible film dosage form.

Controlled release floating drug delivery system for proton pump inhibitors lansoprazole: In-vitro, In-vivo floating and pharmacokinetic evaluation.

Lansoprazole (LPZ) show poor bioavailability because of first pass effect and absorption factors. The floating delivery systems could reduce fluctuations in plasma drug concentration through maintaining desirable plasma drug concentration. The objective of present study was to enhance bioavailability despite first pass effect through continuous availability of drug from floating system. Gum tragacanth (GT) and itaconic acid (IA) based floating hydrogels (FH) were synthesized. Parameters optimized were; microwave radiation exposure time, pH, GT:IA ratio and concentration of the glutaraldehyde. Optimized FH were evaluated for entrapment efficiency (% EE), in-vitro release, FTIR, SEM, and in- vitro and in-vivo floating study. Finally, pharmacokinetic was evaluated in ulcer-induced SD rats. Grafting percentage, swelling ratio and %EE of LPZ was 115%, Ì´250% and 90%, respectively. Microwave radiation exposure time, pH of reaction medium, GT:IA ratios and cross linker concentration were 2 min, pH 5, ratios 2:1 and 0.02%, respectively. The optimized FH showed acceptable floating behavior. The X-ray images revealed that hydrogels remained floated over gastric contents up to 24 hours. The in-vitro release and pharmacokinetics revealed availability of LPZ upto to 24h in-vitro and in ulcer-induced SD rats, respectively. The present hydrogels based floating system of lansoprazole is capable to extend the gastric residence time upto 24 hours.

Amelioration of physicochemical, pharmaceutical, and pharmacokinetic properties of lornoxicam by cocrystallization with a novel coformer.

OBJECTIVE: The present study was aimed to prepare and characterize new cocrystals of lornoxicam (LORX), a BCS class II drug employing 1,3-dimethyl urea (DMU) as a coformer to improve physicochemical, pharmaceutical, and pharmacokinetic performance. METHODS: A screening study was conducted by employing three techniques viz. neat grinding, liquid-assisted grinding (LAG), and solvent evaporation (SE) using different drug-coformer molar ratios (1:1, 1:2, and 1:3). Samples were characterized by DSC, PXRD, ATR-FTIR, SEM, intrinsic dissolution rate (IDR) studies, compressional studies, and pharmacokinetic studies. In vitro dissolution and stability studies (25 °C/60%RH and 40 °C/75%RH for three months) were carried out for cocrystal tablets. RESULTS: LAG and SE were found successful in ratio 1:3 and IDR showed approximately 28- and 19-fold increase, respectively in 0.1 N HCl (pH 1.2) and buffer (pH 7.4) as compared to pure LORX. The cocrystal exhibited good tabletability and was ∼2.5 times that of LORX at 6000 Psi. Dissolution profiles of tablets of cocrystal increased (56% and 100% at pH 1.2 and 7.4, respectively in contrast to those of physical mixture (PhyMix) (∼35% and ∼10%) and pure LORX (∼17% and ∼7%) within 60 min. The Cmax and AUC0-∞ for the selected cocrystal were significantly increased (p < 0.05) which was 2.4 and 2.5 times, respectively, that of LORX in a single dose oral pharmacokinetic study executed in rabbits. Tablets of cocrystal were found stable at both conditions. CONCLUSION: The study indicates that cocrystallization with DMU can concomitantly improve tabletability, dissolution rate, and in vivo performance of dissolution limited drug LORX.

Ibuprofen-loaded centrifugally spun microfibers for quick relief of inflammation in rats.

The conventional dosage forms (tablets, capsules) of ibuprofen have less potential in the suppression of pain and inflammation due to their slow dissolution rates and lower bioavailability. The aim of this study was to fabricate fibrous solid dispersion of ibuprofen for improved dissolution rate and quick therapeutic action. Drug-loaded microfibers were fabricated using centrifugal melt spinning (CMS) technique from the physical mixture of sucrose, ibuprofen and a hydrophilic polymer, PVP. These fibers were characterized by SEM, PXRD, DSC, and FTIR spectroscopy. The selected formulation was also pressed into tablets by direct compression method followed by its in vitro and in vivo characterization. The production yield of fibers was 75 ± 2% with an average diameter of 15 ± 5 µm. The drug loading efficiency (DLE) was 85 ± 5%. The tablets dissolved rapidly (<40 s). In vitro dissolution studies have shown >85% of ibuprofen dissolved from tablet within first 2 min which was ∼5 times quicker than drug alone. Dissolution efficiency has improved from 0.63 of ibuprofen to 0.95 of that in fibers with ∼7 times reduction in mean dissolution time. PXRD, and DSC have shown the amorphous state of ibuprofen in the formulation and FTIR spectra demonstrated no interaction of drug with excipients. In vivo anti-inflammatory studies using rabbits revealed a significant (p < 0.05) reduction in paw volume (mm) in the groups treated with fibrous formulation. This study concludes that microfibers produced by centrifugal melt spinning have improved dissolution rates and bioavailability of ibuprofen. Incorporation of polymer in the formulations improves the production yield and drug loading efficiency of microfibers.

Orexin-A Regulates Follicular Growth, Proliferation, Cell Cycle and Apoptosis in Mouse Primary Granulosa Cells via the AKT/ERK Signaling Pathway.

Granulosa cells (GCs) are essential for follicular growth, development, and atresia. The orexin-A (OXA) neuropeptide is widely involved in the regulation of various biological functions. OXA selectively binds to orexin receptor type 1 (OX1R) and mediates all its biological actions via OX1R. This study aimed to explore the expression of OXA and OX1R and their regulatory role in GCs proliferation, cell cycle progression, apoptosis, oocyte maturation, and underlying molecular mechanisms of these processes and elucidate its novel signaling pathway. Western blotting and RT-qPCR showed that OXA and OX1R were expressed during different developmental stages of GCs, and siRNA transfection successfully inhibited the expression of OX1R at the translational and transcriptional levels. Flow cytometry revealed that OX1R knockdown upregulated GCs apoptosis and triggered S-phase arrest in cell cycle progression. RT-qPCR and Western blotting showed significantly reduced expression of Bcl-2 and elevated expression of Bax, caspase-3, TNF-α, and P21 in OX1R-silenced GCs. Furthermore, the CCK-8 assay showed that knockdown of OX1R suppressed GCs proliferation by downregulating the expression of PCNA, a proliferation marker gene, at the translational and transcriptional levels. Western blotting revealed that knockdown of OX1R resulted in a considerable decrease of the phosphorylation level of the AKT and ERK1/2 proteins, indicating that the AKT/ERK1/2 pathway is involved in regulating GCs proliferation and apoptosis. In addition, OX1R silencing enhanced the mRNA expression of GDF9 and suppressed the mRNA expression of BMP15 in mouse GCs. Collectively, these results reveal a novel regulatory role of OXA in the development of GCs and folliculogenesis by regulating proliferation, apoptosis, and cell cycle progression. Therefore, OXA can be a promising therapeutic agent for female infertility.

Physicomechanical, stability, and pharmacokinetic evaluation of aceclofenac dimethyl urea cocrystals.

Poor physicomechanical properties and limited aqueous solubility restrict the bioavailability of aceclofenac when given orally. To improve its above properties, aceclofenac (ACE) was cocrystallized with dimethyl urea (DMU) in 1:2 molar ratio by dry and solvent assisted grinding. The cocrystals were characterized by ATR-FTIR, DSC, and PXRD, and their surface morphology was studied by SEM. There was enhancement in intrinsic dissolution rate (IDR) (~eight- and ~fivefold in cocrystals prepared by solvent assisted grinding (SAG) and solid state grinding (SSG), respectively, in 0.1 N HCl, pH 1.2) and similarly (~3.42-fold and ~1.20-fold in phosphate buffer, pH 7.4) as compared to pure drug. Additionally, mechanical properties were assessed by tabletability curves. The tensile strength of ACE was < 1 MPa in contrast to the cocrystal tensile strength (3.5 MPa) which was ~1.98 times higher at 6000 psi. The tablet formulation of cocrystal by direct compression displayed enhanced dissolution profile (~36% in 0.1 N HCl, pH 1.2, and ~100% in phosphate buffer, pH 7.4) in comparison to physical mixture (~ 30% and ~ 80%) and ACE (~18% and ~50%) after 60 min, respectively. Stability studies of cocrystal tablets for 3 months indicated a stable formulation. Pharmacokinetic studies were performed by using rabbit model. The AUC0-∞ (37.87±1.3 µgh/ml) and Cmax (6.94±2.94 µg/ml) of the selected cocrystal C1 prepared by SAG were significantly enhanced (p < 0.05) and were ~3.43 and ~1.63-fold higher than that of ACE. In conclusion, new cocrystal of ACE-DMU was successfully prepared with improved tabletability, in vitro and in vivo properties.

Preparation and Characterization of pH-Independent Sustained-Release Tablets Containing Hot Melt Extruded Solid Dispersions of Clarithromycin : Tablets Containing Solid Dispersions of Clarithromycin.

The limited solubility of clarithromycin (CAM), coupled with low bioavailability and rapid elimination, are major shortcomings, needed to be addressed to achieve optimum therapeutic goals. Therefore, sustained-release (SR) tablets containing solid dispersion (SD) granules of CAM were prepared in this study. Initially, SD granules of CAM were prepared by hot melt extrusion (HME) technique using Kollidon VA64 as a hydrophilic carrier. The saturation solubility of SD showed almost 4.5-fold increase as compared to pure CAM in pH 6.8 medium. In vitro drug dissolution data indicated a substantial increase in the dissolution of SD as compared to that of pure CAM. The thermal stability of drug, carrier, and SD at elevated HME temperatures was evident from the results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Powder X-ray diffraction (PXRD) data and scanning electron microscope (SEM) images revealed a decrease in the crystallinity and the uniform dispersion of drug, respectively. Moreover, Fourier transformed infrared spectroscopy (FT-IR) data confirmed the formation of hydrogen bond between the carbonyl group of drug and the hydroxyl group of carrier. SD loaded sustained-release (SD-SR) matrix tablets were prepared with hydrophobic polymers (Eudragit RS100 and Eudragit RL100). The pH-independent swelling and permeability of both polymers were responsible for the sustained drug release from SD-SR tablets. Pharmacokinetic (PK) studies suggested a 3.4-fold increase in the relative bioavailability of SD-SR tablets as compared to that of pure CAM.

Microneedle based transcutaneous delivery of low molecular weight heparin.

This study aimed to fabricate and characterize polymeric microneedle patches for rapid and non-invasive administration of enoxaparin across skin layers. The patches comprising of PVA, sorbitol and enoxaparin sodium were prepared by employing micromolding technique. Formulated patches were characterized physicochemically by folding endurance, dimensional analysis and swelling study, morphologically by optical and scanning electron microscopy and thermally by thermogravimetric analysis. Moreover, performance efficiency of prepared polymeric device was analyzed by in-vitro drug release study and piercing ability. Prepared patches showed appropriate dimensions and folding endurance (i.e., ~1100) indicating satisfactory integrity of polymeric device. Patches exhibited appropriately distanced needles with pointed tips in optical and scanning electron microscopy analysis. Thermogravimetric analysis proved thermal stability of formulation ingredients and prepared patches. Swelling percentage was >110 % suggesting that prepared formulation would allow penetration of physiological fluids in its polymeric network. Maximum (~89%) drug was released within ~2 hours during in-vitro release study. In-vitro piercing ability experiments suggested that prepared patches successfully breached skin barrier stratum corneum. It is concluded that prepared microneedle device can serve as a potential alternative of currently employed invasive parenteral route for rapid and efficient administration of enoxaparin sodium in the systemic circulation.

Solubility and dissolution rate enhancement of ibuprofen by cyclodextrin based carbonate nanosponges.

In the present study nanotechnology approach, i.e., a cyclodextrin (CD) based carbonate nanosponge was used to improve the solubility and dissolution of ibuprofen. Solvent and ultrasound assisted methods were used to prepare nanosponges using two CDs (ß-CD and 2-hydroxypropyl-ß-CD (2HP-ß-CD)) and a cross-linker (CL) diphenyl carbonate (DPC) in varying molar ratios. Nanosponges were investigated for their solubilizing efficiency and phase solubility studies. Structural analysis by Fourier transform infrared (FTIR) and powder X-ray diffraction (PXRD), thermo-analytical characterization by differential scanning calorimetry (DCS), morphology by scanning electron microscopy (SEM). In-vitro drug release followed by in-vivo analgesic and anti-inflammatory studies were performed. 2HP-ß-CD based nanosponges (molar ratio 0.01:0.04) prepared by ultrasound assisted method showed the highest solubilizing efficiency (i.e., 4.28 folds). Stability constant values showed that all complexes were stable. Inclusion complexes of drug was confirmed by PXRD and DSC. SEM images showed porous structures confirming the formation of cross-linked network. Particle size was in the range of 296.8±64 to 611.7±32nm. In-vitro release studies showed enhanced dissolution profile from nanosponge formulation (~94% from I11) as compared to the pure drug (~45% Ibuprofen) in 120min. Significant (p<0.05) extent of pain inhibition and anti-inflammatory activity was observed for nanosponge formulation when compared with the pure drug. CD based carbonate nanosponges with better solubility, enhanced release profile, improved analgesic and anti-inflammatory activity were successfully formulated for ibuprofen.

Development and validation of single analytical HPLC method for determination of flavoxate HCl in bulk, tablets and biological fluids.

A simple, sensitive and precise high performance liquid chromatographic (HPLC) method was developed and validated for determination of flavoxate HCI in raw material, tablets and biological fluids. The method followed by using the Zorbax XDB-C18 column containing Di-isobutyl n-octadeceylsilane (4.6mm×150mm, 5µm). The mobile phase consisted of acetonitrile: methanol: 0.15M sodium perchlorate (17:35:48 v/v) having pH 3. UV detection was carried out at 229nm at 40°C. Results indicated that the method has successfully established and validated in accordance with ICH guidelines acceptance criteria for linearity (0.03-7.5µg), accuracy (101.18-101.28%), robustness of column age and column lot (peak area %CV<0.04, purity %CV< 0.006) and robustness of HPLC condition (%CV<0.02), precision (intra and inter day precision assay, %CV values for peak area and percent purity of flavoxate HCl<2%) and system suitability parameters. The average noise, theoretical LOD and LOQ were found to be 0.01 mAU, 0.03 mAU and 0.6ng, respectively. The Coefficient of determination (r2) ranging from 0.03µg to 7.5µg, 0.99 which was within acceptable criteria of r2 & gt 0.99. The spiked recoveries of samples were 101.28, 101.18 and 101.18% respectively. All data revealed that this method can be used for in-vitro & in-vivo determination of flavoxate HCI in various pharmaceutical preparations.

Kupffer cells mediate the recruitment of hepatic stellate cells into the localized liver damage.

Currently, there is a growing interest in understanding the cellular and molecular events of immune-cell trafficking and recruitment of hepatic stellate cells (HSCs) in liver diseases. Aberrant activation of HSCs is the key event leading to chronic liver fibrosis. However, the underlying mechanisms of the recruitment of HSCs in a locally injured liver are not clearly understood. Here, we report a new experimental approach for the study of inflammatory responses as well as the recruitment of HSCs into the localized cryolesion. We observed a significant liver damage accompanied by the up-regulation of plasma ALT and AST. In addition, we also found increased levels of MCP-1, IL-6 and IL-10 cytokines. The peak cytokine levels were detected at 8 h after injury, followed by intrahepatic infiltration of neutrophils and monocytes into the injury site (from 8 h to day 3), while the kupffer cells (KCs) and HSCs were mainly detected on day 3 after injury. Interestingly, the depletion of KCs, but not neutrophils, reduced the directional recruitment and accumulation of HSCs at the injury site. Moreover, the combinatorial recruitment of KCs and HSCs resulted in the gradual restoration of fibrotic area to almost typical histological appearance on day 14 post-injury. In conclusion, our data demonstrated a localized infiltration and accumulation of neutrophils and monocytes at a "predefined loci", and further revealed that KCs are critical for the recruitment of HSCs during injury, and thus, may play an important role in tissue repair.

Preparation and characterization of indomethacin loaded films by piezoelectric inkjet printing: a personalized medication approach.

The purpose of this study was to investigate the application of piezoelectric inkjet technology in the preparation of custom-made indomethacin (IMC) films. Indomethacin solutions with and without PVP were printed onto polymeric sheets using a commercial inkjet printer. Drug loading was varied by selecting a machine parameter different dots per inches (DPIs). The printed patches were evaluated for particulate morphologies, drug loading, in vitro release and ex vivo skin permeation and anti-inflammatory effects using hind paw inflammation model. Calculated drug loaded in 2 × 2 cm2 patches of IMC of 96, 300, and 600 DPIs were in the range of 40, 60, and 65 µg, respectively. Patches loaded with IMC alcoholic solution showed crystalline structures observed by scanning electron microscopy and the addition of PVP in solution turned it to amorphous form. The drug release profile showed 60-70% of total drug released in 3 h. Permeation studies showed 40-50% of total drug loaded permeated through rat skin using Franz cells. Patches with higher printing density 600 DPI showed anti-inflammatory effect in hind paw inflammation model studies. This study has shown the potential of personalized medicine in which a calculated amount of drug can be delivered to patients by piezoelectric technology.

In Vivo Evaluation of a Novel Chitosan-Polycaprolactone Based Mucoadhesive Gastro-Retentive Sustained Release Drug Delivery System for Milnacipran HCl.

The study was aimed to develop a gastro-retentive mucoadhesive sustained release matrix formulation for milnacipran HCl (MCN) by using the design of experiment (DoE). The gastro-retentive swellable mucoadhesive matrix tablets were prepared by modified solvent-based wet granulation through mixing milnacipran (MCN), chitosan low molecular weight (CH-LM), chitosan medium molecular weight (CH-MM), and polycaprolactone (PCL). Optimization of the formulation was carried out via DoE. Formulations were characterized by DSC, FTIR, and in vitro drug release testing. In vitro mucoadhesive studies were performed on rabbit's intestinal mucosa. In vivo drug release studies were performed on dogs. Optimized matrix formulations showed no significant interaction among the polymers and MCN, confirmed by DSC and FTIR, and were characterized as swellable controlled release matrix systems. The optimized formulations MOPT3 and MOPT4 showed significantly improved adhesion time of 12 h on the gastric mucosa. Based on the in vivo analysis, the elimination half-life of MCN was increased that proved the matrix formulation to be sustained release DDS. The Tmax was extended from 2 to 12 ± 1.63 h for MOPT4. Cmax of matrix was reduced to 121.60 ± 9.496 ng/ml as compared to 149.22 ± 9.942 ng/ml of solution. The bioavailability of the matrix formulation was significantly improved as compared to the MCN solution by 272.20 ± 48.11%. The controlled drug release and strong mucoadhesive properties of the gastro-retentive matrix formulations suggested the potential application of the formulations for the extended oral delivery of MCN.

Antibiogram and recent incidence of multi-drug resistant carbapenemase producing Escherichia coli isolated from paediatric patients.

OBJECTIVE: To gauge the recent breadth of MDR E. coli along with antibiogram of carbapenemase producing (CP) E. coli among children from an institute which receives patients from all over Punjab. METHODS: The bacterial strains of E. coli isolated from various specimens of patients were collected from April 2017 to August 2018 and processed using standard biochemical tests and API 20E system (bioMerieux). Phenotypic screening for CP E. coli was done by the modified Hodge test, whereas antibiotic susceptibility testing was done with Kirby-Bauer disc diffusion technique. RESULTS: Total of 6,468 bacterial strains were isolated, out of which 1,552 (24%) were E. coli. Carbapenem resistance was observed in 245 (16%) strains, amongst which 113 (46%) were confirmed to be CP. E. coli isolated from males were higher as compared to females (p<0.05). Majority of the organisms were isolated from blood (37.2%) samples. The hospital discharged about 65% of patients, while 23% left against medical advice. Overall MDR amongst E. coli was 93.26%. Colistin sulphate (15.9%) and nitrofurantoin (16.8%) showed the most efficacy followed by amikacin (15%) and fosfomycin (10.6%). CONCLUSION: The isolation of high number of MDR E. coli amongst the paediatric patients is worrisome, which could serve as a potential source of horizontal genes transfer to other genera.

Evaluation of solubility and dissolution of lamotrigine using lipid based microparticulate carriers: An in-vitro analysis.

The present study was designed to develop novel lipid microparticles in order to improve solubility, dissolution and bioavailability of a lipophilic drug of BCS class II, lamotrigine. For that purpose, increase in solubility of the model drug was investigated using different lipids and the promising lipids were further used for the fabrication of microparticles. Solid lipid (GMS) and liquid lipid (olive oil) were used along with an emulsifier (Tween 80) and a stabilizer (Poloxamer 188) to prepare mircoparticles by melt emulsification method. Prepared formulations were characterized for physicochemical properties such as solubility, particle size, zeta potential, polydispersity index and entrapment efficiency. In vitro dissolution studies were carried out in 0.01 N HCl for 24 h. The findings provided that the solubility of lamotrigine was reasonably increased in GMS, olive oil, Tween 80 and poloxamer 180. The lamotrigine solubility was increased 4.92 fold with G4 microparticles formulation. Size analysis revealed that the microparticles were in range of 11.1 to 178.8 µm and the zeta potential values were from -13 to -20 mV. Microparticles prepared with solid and liquid lipids exhibited satisfactory entrapment efficiency ranging from 59 to 87%. Conclusively, the outcomes of the studies suggest the appropriateness of selected ingredients for improving solubility as well as loading of lamotrigine in microparticles for its sustained and effective delivery.

Characterization of inheritance and preliminary biochemical mechanisms of spirotetramat resistance in Phenacoccus solenopsis Tinsley: An economic pest from Pakistan.

Phenacoccus solenopsis is an economically important insect pest of different agronomic and horticultural field crops. In Pakistan, the cotton crop was severely attacked by P. solenopsis during 2007 and since then a varied group of insecticides are used by farmers to manage this pest. As a result, insecticide resistance has become a barrier in control of P. solenopsis. The current study was designed to explore the basics of genetics, realized heritability and possible genetic mechanisms of resistance against spirotetramat in P. solenopsis. Before selection, the wild population (Wild-Pop) showed 5.97-fold resistance when compared with lab-reared susceptible strain (Susceptible Lab-Pop). The P. solenopsis was selected with spirotetramat to 21 generations, called Spiro-SEL Pop, which showed 463.21-fold resistance as compared with the Susceptible Lab-Pop. The values of LC50 for F1 (Spiro-SEL Pop ♂ × Susceptible Lab-Pop ♀) and F1 (Spiro-SEL Pop ♀ × Susceptible Lab-Pop ♂) populations were statistically similar and values of dominance level were 0.42 and 0.54, respectively. Reciprocal crosses between Susceptible Lab-Pop and Spiro-SEL Pop showed that resistance was of autosomal in nature with incomplete dominant traits. According to the fit test, monogenic model estimation of the number of genes, which are responsible for the development of spirotetramat resistance in a population of P. solenopsis, showed that multiple genes are involved in controlling the resistance levels in tested strains of P. solenopsis. The value of heritability for resistance against spirotetramat was 0.13 in P. solenopsis. Our results suggested the presence of a metabolic-based resistance mechanism associated with the monooxygenases in P. solenopsis, while testing the synergism mechanism. These results will provide the baseline to design an effective control strategy to manage P. solenopsis in the field.

Spaceborne Satellite for Snow Cover and Hydrological Characteristic of the Gilgit River Basin, Hindukush⁻Karakoram Mountains, Pakistan.

The Indus River, which flows through China, India, and Pakistan, is mainly fed by melting snow and glaciers that are spread across the Hindukush⁻Karakoram⁻Himalaya Mountains. The downstream population of the Indus Plain heavily relies on this water resource for drinking, irrigation, and hydropower generation. Therefore, its river runoff variability must be properly monitored. Gilgit Basin, the northwestern part of the Upper Indus Basin, is selected for studying cryosphere dynamics and its implications on river runoff. In this study, 8-day snow products (MOD10A2) of moderate resolution imaging spectroradiometer, from 2001 to 2015 are selected to access the snow-covered area (SCA) in the catchment. A non-parametric Mann⁻Kendall test and Sen's slope are calculated to assess whether a significant trend exists in the SCA time series data. Then, data from ground observatories for 1995⁻2013 are analyzed to demonstrate annual and seasonal signals in air temperature and precipitation. Results indicate that the annual and seasonal mean of SCA show a non-significant decreasing trend, but the autumn season shows a statistically significant decreasing SCA with a slope of -198.36 km²/year. The annual mean temperature and precipitation show an increasing trend with highest values of slope 0.05 °C/year and 14.98 mm/year, respectively. Furthermore, Pearson correlation coefficients are calculated for the hydro-meteorological data to demonstrate any possible relationship. The SCA is affirmed to have a highly negative correlation with mean temperature and runoff. Meanwhile, SCA has a very weak relation with precipitation data. The Pearson correlation coefficient between SCA and runoff is -0.82, which confirms that the Gilgit River runoff largely depends on the melting of snow cover rather than direct precipitation. The study indicates that the SCA slightly decreased for the study period, which depicts a possible impact of global warming on this mountainous region.