Alveolar Cleft Reconstruction Using Double Iliac Corticocancellous Bone Plates Grafting Technique in Mixed Dentition Phase.

OBJECTIVE: The primary goal of maxillary alveolar cleft reconstruction in patients with cleft lip/palate at the phase of mixed dentition is to build bone in the cleft area which in turn allows closure of the oronasal fistula, establishes arch continuity, and improve maxillary stability. This study aimed to evaluate the double iliac corticocancellous bone plates grafting technique for initial alveolar cleft grafting. DESIGN: This prospective study was conducted on 12 consecutive patients with unilateral complete alveolar cleft and previous cleft lip and palate corrective surgery. INTERVENTION: For all patients, the iliac crest graft was harvested and cut into 2 cortical bone plates and adapted labially and palatally. Both plates were fixed with screws then the gap between the 2 plates was filled with cancellous bone. The grafted side was compared to the contralateral side 9 months postoperatively regarding labio-palatal alveolar width and bone density, while the 9 months postoperative graft height was compared to the immediate postoperative height using computed tomography scans. RESULTS: All grafted sides showed similarity to the contralateral sides regarding both alveolar width and bone density with minimal crestal bone resorption. CONCLUSION: The double iliac corticocancellous bone plate grafting technique seems to be a reliable method for alveolar cleft reconstruction with adequate bone quality and contour.

Recent developments in porous ceramic membranes for wastewater treatment and desalination: A review.

The development of membrane technology has proved vital in providing a sustainable and affordable supply of clean water to address the ever-increasing demand. Though liquid separation applications have been still dominated by polymeric membranes, porous ceramic membranes have gained a commercial foothold in microfiltration (MF) and ultrafiltration (UF) applications due to their hydrophilic nature, lower fouling, ease of cleaning, reliable performance, robust performance with harsh feeds, relative insensitivity to temperature and pH, and stable long-term flux. The enrichment of research and development on porous ceramic membranes extends its focus into advanced membrane separation technologies. The latest emerging nanofiltration (NF) and membrane distillation (MD) applications have witnessed special interests in constructing porous membrane with hydrophilic/functional/hydrophobic properties. However, NF and MD are relatively new, and many shortcomings must be addressed to compete with their polymeric counterparts. For the last three years (2018-2020), state-of-the-art literature on porous ceramic membranes has been collected and critically reviewed. This review highlights the efficiency (permeability, selectivity, and antifouling) of hydrophilic porous ceramic membranes in a wide variety of wastewater treatment applications and hydrophobic porous ceramic membranes in membrane distillation-based desalination applications. A significant focus on pores characteristics, pore sieving phenomenon, nano functionalization, and synergic effect on fouling, the hydrophilic porous ceramic membrane has been discussed. In another part of this review, the role of surface hydrophobicity, water contact angle, liquid entry pressure (LEP), thermal properties, surface micro-roughness, etc., has been discussed for different types of hydrophobic porous ceramic membranes -(a) metal-based, (b) silica-based, (c) other ceramics. Also, this review highlights the potential benefits, drawbacks, and limitations of the porous membrane in applications. Moreover, the prospects are emphasized to overcome the challenges in the field.

Chest wall mass: what lies beneath?

CLINICAL INTRODUCTION: A 24-year-old Filipino man attended the ED with a 1-month history of a discrete swelling over his upper anterior chest wall that was rapidly increasing in size and tenderness. He denied any other symptoms. His medical history was unremarkable.Examination revealed a tender, 7 cm × 6 cm mass over the upper part of the sternum (figure 1). The surface was smooth, it was immobile, non-compressible and the overlying skin was normothermic but mildly erythematous. Cervical lymphadenopathy was present. His vital signs were normal.emermed;35/10/586/F1F1F1Figure 1Chest wall mass. QUESTION: What is the most likely diagnosis?LipomaChondrosarcomaLymphoma Mycobacterium tuberculosis (TB).

The protective effect of pregabalin and xanthenone on testicular ischemia/reperfusion injury in rats.

BACKGROUND: Torsion of the spermatic cord is a hazardous and common urologic issue. The current work evaluates the possible protective effect of pregabalin (PGB) and xanthenone (XAN) in testicular ischemia/reperfusion injury induced by testicular torsion/detorsion in rats. MATERIALS AND METHODS: Seven groups of adult male Wistar albino rats were allocated randomly into seven groups, namely, sham control, torsion/detorsion (T/D), PGB 50 mg/kg, PGB 100 mg/kg, XAN 1 mg/kg, XAN 2 mg/kg, and PGB 50 mg/kg plus XAN 1 mg/kg groups. Serum cholesterol and testosterone levels were determined. Also, the levels of malondialdehyde (MDA), reduced glutathione (GSH), nitric oxide (NO), superoxide dismutase (SOD), tumor necrosis factor-α (TNF-α), nuclear factor kappa B (NF-қB), angiotensin (Ang) II, Ang-(1-7), and angiotensin-converting enzyme2 (ACE2) were assessed in testicular tissue. Immunohistochemical analysis of heme oxygenase-1 (HO-1) and caspase-3 was performed. Finally, the histopathological examination of the testicular tissues was performed. RESULTS: The PGB 50 mg/kg, PGB 100 mg/kg, XAN 1 mg/kg, XAN 2 mg/kg, and PGB 50 mg/kg plus XAN 1 mg/kg groups showed a significant decrease in serum cholesterol, MDA, NO, TNF-α, NF-қB, and Ang-II levels coupled with a significant increase in both testosterone and ACE2 expression. Furthermore, all test groups showed a significant improvement in the histopathological picture with a reduction in caspase-3 and an increase in HO-1 immunoexpression in testicular tissue. CONCLUSION: PGB and XAN may have promising effects on preventing testicular T/D injury through antioxidant, anti-inflammatory, and antiapoptotic actions.

Augmented anastomotic ureteral reconstruction using buccal mucosal graft, initial experience.

OBJECTIVE: To assess the augmented anastomotic ureteral reconstruction using buccal mucosal graft based on omental flap for managing ureteral stricture. SUBJECTS AND METHODS: This prospective cohort study was conducted on 13 patients with ureteric strictures of different lengths secondary to Bilhalziasis, iatrogenic (post endoscopy) and post inflammatory etiology in upper and mid ureteral segments were treated with buccal mucosal patch grafts and The graft is fixed to the undersurface or the posterior surface of the omentum before doing graft anastomosis to the ureteral walls as to ensure the process of graft take sticky to the principles of tissue transfer. All patients were subjected to full history taking, clinical examination for assessment of pain, lower or upper urinary track symptoms and laboratory investigation (complete blood count, CRP, liver function test and kidney function test (serum urea and creatinine). RESULTS: The mean operative time was 148.85 min and mean hospital stay was 3 days. Mean blood loss was ranged from 20 to 210 ml and Stent was removed after 8-12 weeks. The mean follow up was 13 months, all patients had a non-obstructive RI value <0.7 with a non-obstructed drainage pattern on the diuretic renogram except one patient who had severe postoperative UTI necessitating nephrostomy tube insertion his drainage curve was plateau. CONCLUSION: BMG ureteroplasty is a valuable option for a carefully selected patient. The fixation of the graft on the back surface of the omentum allows for better anatomical reconstruction without any twisting to the omental pedicle.

Computer Guided Generated Dual-Purpose Splint for Bilateral Sagittal Split Osteotomy.

Purpose: to evaluate the efficacy of dual-purpose computer-generated splint in guiding the proximal and the distal segment in bilateral sagittal split osteotomy. Patients and Method: It was a prospective case series study directed on 8 class III patients indicating the need of maxillary advancement and mandibular set back by bilateral sagittal split osteotomy. A CAD/CAM splint is generated to guide the distal segment to the stable maxilla and at the same time a grooved extension to engage the proximal segment ensuring the condyle in its planned position during fixation. The primary outcome was measured by calculating the difference between the pre- and post-operative condylar segment position. Results: The present study included five female patient and three male patient with mean age of 28.4 ± 5.1 years. The accuracy of the splint in positioning the mandibular proximal segment showed promising results ranging from 2.59 to 0.49. Conclusion: The dual-purpose splint introduced in this study showed satisfied results in maintaining the pre-operative condylar position while securing the distal segment in the desired plan.

Computer-guided contouring of craniofacial fibrous dysplasia involving fronto-orbital or fronto-cranial region using patient specific surgical depth guide: A prospective case series.

The aim of this study was to introduce a new computer guided technique for debulking and contouring the craniofacial fibrous dysplasia involving the fronto-orbital and fronto-cranial regions. Computer-guided contouring was performed using a modified patient-specific surgical depth guide for six patients with craniofacial fibrous dysplasia involving the fronto-orbital and fronto-cranial regions. Virtual planning was performed to determine the desired amount of bone removal and construct the patient-specific surgical depth guide. Then, the guide was printed using rapid prototyping. In the surgical theatre, the guide was seated in position. Implant drills were inserted through the created depth holes according to the planned fixed depth to create depth holes. Finally, the bone in between the created holes was removed using cutting discs, bone chisels and surgical burs. Satisfaction with facial aesthetics was evaluated by the patients using a Likert scale, and by the surgeons using the Whitaker rating scale. The surgical procedures were uneventful for all the patients. All the patients were satisfied with the post-operative facial esthetics and categorized as category I Whitaker rating scale. Patient-specific surgical guide technique for recontouring of fronto-orbital and fronto-cranial fibrous dysplasia can be considered an accurate substitution technique that overcomes the drawbacks of the unpredictable conventional one. Further investigations are required.

Application of conventional and emerging low-cost adsorbents as sustainable materials for removal of contaminants from water.

The impact of water pollution has led to the search for cost-effective and environmentally friendly treatment processes to alleviate the associated environmental hazards. Adsorption is identified as an advanced treatment technology that offers simplicity and cheap alternatives to water treatment technologies when low-cost adsorbents such as industrial by-products, waste, and agricultural waste are utilized. The utilization of these materials as low-cost adsorbents for the treatment of drinking water will bring them some value. Several practices have been done to improve the removal efficiencies of the low-cost adsorbents in order to achieve WHO standards of drinking water quality. The paper highlights some of the synthesis routes employed for the modification of low-cost adsorbents. This updated review provides information on the different applications of low-cost adsorbents in removing pollutants and their adsorption capacities in an attempt to deploy the recent sustainable low-cost adsorbents with high removal efficiencies for water treatment. Future research should focus on the fabrication of hybrid low-cost adsorbents with multifunctional and antimicrobial properties. In addition, life cycle assessment (LCA) should be conducted to reveal the environmental burdens associated with the modification of the low-cost adsorbent to improve their removal efficiencies.

Extracorporeal shock wave lithotripsy for treatment of large pediatric renal pelvic stone burden more than 2 cm.

BACKGROUND: The high recurrence rates in pediatric urolithiasis indicate the need for none invasive or a minimally invasive treatment such as SWL. Therefore, EAU, ESPU and AUA recommend SWL as a first line treatment for renal calculi ≤ 2, and RIRS or PCNL for renal calculi > 2 cm. SWL is superior to RIRS and PCNL as it is inexpensive, outpatient procedure, and it has a high SFR in well selected cases specially pediatrics. On the other hand, SWL therapy has a limited efficacy with a lower SFR, and high retreatment rate and/or additional interventions for treatment of larger and harder renal calculi. OBJECTIVE: We carried out this study to evaluate the efficacy and safety of SWL for treatment of renal stones > 2 cm to extend its indications for pediatric renal calculi. METHODS: Between January 2016 and April 2022, we reviewed the records of patients with renal calculi treated by SWL, mini-PCNL, RIRS and open surgery in our institution. Forty-nine eligible children aged 1-5 years old, presented with renal pelvic and/or calyceal calculi measuring 2-3.9 cm and underwent SWL therapy were picked up and participated in the study. The data of an additional eligible 79 children with the same age and had renal pelvic and/or calyceal calculi > 2 cm up to stag horn calculi and underwent mini-PCNL, RIRS and open renal surgery were also picked up and participated in the study. We retrieved the following preoperative data from the records of the eligible patients; age, gender, weight, length, radiological findings (stone size, side, site, number and radio-density), renal function tests, routine laboratory findings, and urine analysis. The outcomes data in the form of; operative time, fluoroscopy time, hospital stay, SFRs, retreatment rates and complication rates were also retrieved from the records of patients treated with SWL and other techniques. Also, we collected the SWL characteristics in terms of; position, number and frequency of shocks, voltage, time of the session and U/S monitoring to assess stone fragmentation. All SWL procedures were performed according to the institution's standards. RESULTS: The mean age of patients treated with SWL was 3.23 ± 1.19 years old, the mean size of the treated calculi was 2.31 ± 0.49 and the mean length of the SSD was 8.2 ± 1.4 cm. All patients had NCCT scan and the mean radio-density of the treated calculi was 572 ± 169.08 HUs based on NCCT scans Table (1). Single- and two-session SFRs of SWL therapy were 75.5% (37/49 patients) and 93.9% (46/49 patients), respectively. The overall success rate was 95.9% (47/49 patients) after three-session of SWL. Complications experienced by 7 patients (14.3%) in the form of fever (4.1%), vomiting (4.1%), abdominal pain (4/1%), and hematuria (2%). All complications were managed in outpatient settings. Our results were obtained on the basis of preoperative NCCT scans for all patients and postoperative plain KUB films and real-time abdominal U/S. Furthermore, single-session SFRs for SWL, mini-PCNL, RIRS and open surgery were 75.5%, 82.1%, 73.7% and 90.6%, respectively. Two-session SFRs by the same technique were 93.9%, 92.8%, and 89.5% for SWL, mini-PCNL and RIRS, respectively. A lower overall complication rate and higher overall SFR were found with SWL therapy compared to other techniques, Fig. (1). DISCUSSION: Being a non-invasive outpatient procedure with a low complication rate and good spontaneous passage of stone fragments is the main advantage of SWL. In this study, the overall SFR is 93.9% where 46 out of 49 patients were completely rendered stone free after three session of SWL with overall success rate 95.9%. Badawy et al. reported overall success rates of 83.4% for renal stones with a mean stone size of 12.5 ± 7.2 mm. In children with renal stones measuring 18.2 mm, Ramakrishnan et al. reported a 97% SFR in accordance with our results. The high overall success rate (95.9%) and SFR (93.9%) in our research were attributed to the regular use of ramping procedure, low shock wave rate, percussion diuretics inversion (PDI) approach and alpha blocker therapy in all participants and short SSD. The limitations of our study are small sample of patients and its retrospective nature. CONCLUSION: The non-invasive nature and replicability of the SWL procedure, along with the high success and low complication rates, give us a new insight to consider its application for treating pediatric renal calculi > 2 cm over the other more invasive techniques. Short SSD, the use of ramping procedure, low shock wave rate, 2 min break, PDI approach and alpha blockers therapy help better success of SWL. LEVEL OF EVIDENCE: IV.

Association of IL-17F Gene Polymorphism and Its Serum Level with SARS-CoV-2 Infection.

OBJECTIVE: Although multiple studies have addressed the clinical outcomes of coronavirus disease, little data exist regarding the defi- nition of immune and inflammatory profiles associated with this infection. Its clinical manifestations often worsen in association with hypercytokinemia (elevated interleukin 8 and interleukin 17). We conducted this research to elucidate the effect of interleukin 17 levels and interleukin 17F gene polymorphism on the severity and outcomes of coronavirus disease. MATERIAL AND METHODS: Ninety patients with confirmed coronavirus disease and 30 healthy controls were enrolled. Coronavirus disease cases were classified into nonsevere, severe, and critical according to the World Health Organization definition. Approximately 10 mL peripheral blood sample was collected from all patients and controls by venipuncture in-plane and ethylenediaminetetraacetic acid tube. Enzyme-linked immunosorbent assay kits were used for calculating serum interleukin 17 levels, whereas real-time polymerase chain reaction was used for genotyping using the 5'-nuclease allelic discrimination assay for single nucleotide polymorphisms genotyping. RESULTS: As regards interleukin 17 levels, there was a significant elevation of interleukin 17 in coronavirus disease cases compared to control healthy persons (P < .001). Moreover, serum interleukin 17 levels tended to be significantly higher with increased disease sever- ity (P = .004). Patients with critical diseases expressed a significant rise of interleukin 17 compared to severe (P = .03) and nonsevere cases (P = .02). We noted no significant difference between the critical, severe, and nonsevere cases regarding different interleukin 17F genotypes. CONCLUSION: Coronavirus disease is associated with elevated levels of interleukin 17, which tended to be considerably higher with disease severity. However, different interleukin 17F genotypes do not affect either the predisposition or the severity of coronavirus disease.

Can pyeloplasty restore normal renal function in patients with severe unilateral ureteropelvic junction obstruction and DRF < 35.

PURPOSE: To assess the outcome of successful pyeloplasty in infants with Ureteropelvic Junction Obstruction (UPJO) and a differential renal function of (DRF) < 35% whether they can attain normal postoperative renal function or not. METHODS: All children who were diagnosed with antenatal hydronephrosis due to UPJO were presented to our institutions and were prospectively followed up. Pyeloplasty was performed based on predefined indications such as: initial DRF ≤40%, progression of hydronephrosis, and febrile urinary tract infection (UTI). A total of 173 children, who had successful surgical intervention due to impaired DFR, were divided according to their pre-intervention DRF value as follows: DRF <35% (group I) and DRF 35-40% (group II). The renal morphology and function changes were recorded and used for comparison between both groups. RESULTS: Group I was comprised of 79 patients, and group II included 94 patients. Pyeloplasty achieved significant improvement in the anatomical and functional indices in both groups (p-value <0.001). The degree of improvement in Anteroposterior diameter (APD) and cortical thickness was comparable in both groups (P-value, 0.64 and 0.44 respectively). While the improvement in the DRF was significantly higher in group I (16.06 ± 6.6) than in group II (6.25 ± 2.66) (P-value <0.001). Despite that, a significantly higher percentage of infants in group II (61.7%) achieved normal final DRF compared with only (10.1%) in group I (Figure). CONCLUSION: Even in severely impaired renal function (<35%), successful pyeloplasty can recover a significant part of lost renal function. However, most of these patients do not achieve normal postoperative renal function.

Computer guided calvarial bone grafting for reconstruction of orbital floor blow out fracture.

BACKGROUND: Calvarial grafts represents a superior option for orbital floor reconstruction, however the difficulty of intraoperative moulding and placement remains as a major limitation. We used patient specific guides and sterolithographic models to facilitate this procedure. METHODS: The study was conducted on 10 patients with orbital floor blow out fracture. A graft harvesting guide was virtually constructed based on the defect using mirroring of the normal side. The virtual guide and the defective orbital floor were then printed. The graft was harvested using the guide and adjusted to the defect using the model, finally seated in place. RESULTS: All patients showed no enophthalmos or diplopia. Orbital volume was comparable for both traumatised and normal orbits with no statistical significance difference (p value 0.28), and orbital volume ratio was 101.76 ± 4.7%. CONCLUSION: The use of graft harvesting guide and orbital floor models for intraoperative graft moulding showed promising results.

Patient-specific PEEK implants for immediate restoration of temporal fossa after maxillary reconstruction with temporalis muscle flap.

BACKGROUND: Temporal hollowing is a common complication following the rotation of the temporalis muscle that leaves the patient with a cosmetic impairment. Several alloplastic materials have been used to reconstruct the donor site; however, these implants need meticulous adaptation to conform the periphery of the defect and restore the contour of the temporal area. The aim of this study was to assess the use of patient-specific polyetheretherketone (PEEK) temporal implants to prevent temporal hollowing following the use of full temporalis muscle flap for large maxillary defects reconstruction. METHODS: This was a prospective study conducted on eight patients with major maxillary defects indicating the need of reconstruction with full temporalis muscle flap or any lesion indicating major maxillary resection and immediate reconstruction with total temporalis muscle flap. For each patient, a patient-specific PEEK implant was fabricated using virtual planning and milled from PEEK blocks. In the surgical theater, the temporalis muscle was exposed, elevated, and transferred to the maxilla. After the temporalis muscle transfer, PEEK implants were fixed in place to prevent temporal hollowing. RESULTS: The surgical procedures were uneventful for all patients. The esthetic result was satisfactory with no post-operative complications except in one patient where seroma occurred after 2 weeks and resolved after serial aspiration. CONCLUSION: Patient-specific PEEK implant appears to facilitate the surgical procedures eliminate several meticulous steps that are mainly based on the surgeon's experience. TRIAL REGISTRATION: Clinical trials registration: NCT05240963 .

Influence of Micro-RNA-423 Gene Variation on Risk and Characteristics of Breast Cancer.

BACKGROUND: Micro-RNAs (miRNAs) are post-transcriptional regulators of gene expression that are abundantly expressed in a variety of cancers, including breast cancer. The mechanism of miRNAs in breast cancer oncogenesis is poorly understood. The goal of this study was to determine if there was a link between the miR-423 rs6505162 gene variation and breast cancer susceptibility among Egyptian patients. METHODS: This was a case control study that included 120 female patients with pathologically confirmed breast cancer and 120 healthy controls. The patients and controls were genotyped for miR-423 rs6505162 polymorphism by real time PCR. The association of breast cancer patients' genotypic variant and clinicopathological characteristics was analyzed. RESULTS: Breast cancer patients showed significantly higher AA and CA genotypes frequencies when compared to controls. This was translated as higher risk to develop breast cancer in patients harboring these genotypic variants (OR = 3.28, p= 0.002; OR = 2.11, p= 0.011, respectively). The frequencies of Her2 positive and advanced stage disease were significantly increased in the AA genotype variant (p<0.001). CONCLUSION: Our data suggest that miR-423 rs6505162 polymorphism could be a potential risk factor in the pathogenesis of breast cancer among Egyptian population.

TiO2 ceramic membrane decorated with Fe3O4-Ag composite nanoparticles for produced water treatment.

This study focused on the surface modification of commercial TiO2 membranes with Fe3O4 decorated silver (Ag) nanoparticles (Fe3O4-Ag) via chemical attachment. Firstly, the Ag concentration on Fe3O4 was optimized, and different composites were prepared and characterized. Secondly, the optimal composite was used to prepare novel TiO2/Fe3O4-Ag ceramic membranes via surface coating through tetraethyl orthosilicate (TEOS) crosslinking. The membranes were characterized using SEM, EDX, FTIR, XRD, and contact angle. Biofouling resistance of the membranes was investigated using the Coomassie Blue dye method. The coated membranes were tested for water flux, chemical oxygen demand (COD) rejection, and biofouling resistance. Results showed that all coated membranes exhibited higher water flux. For example, the membrane with a 1.25 wt% Fe3O4-Ag coating showed the highest filtration flux of 1445 L/m2h (LMH) compared to the pristine membrane (379 LMH) without compromising the COD rejection. The resistance of the membrane to biofouling increased with the increase of Fe3O4-Ag nanoparticle concentration. The obtained results demonstrate the great potential of TiO2/Fe3O4-Ag ceramic membranes for the treatment of produced water.

The feasibility of one-day length of hospital stay after pediatric percutaneous nephrolithotomy.

PURPOSE: To evaluate the safety of one-day length of hospital stay (LOS) after pediatric percutaneous nephrolithotomy (PNL), and to study the predictors of LOS. METHODS: A retrospective study included pediatric patients who PNL for renal calculi more than 1 cm between January 2016 and October 2019. PNL was performed in prone position. The nephrostomy tubes and ureteric catheters were removed on the second day and patients were discharged if there was no perforation or significant residual stones. The stone free rate, LOS and the surgical complications were reported. Bivariate and multivariate analysis were used to predict the LOS. RESULTS: 220 patients were identified. The median age (range) was eight (Range: 3-17) years. Stone free rate was achieved in 200 patients (91%) of patients, while residual fragments were detected in 20 patients (9%). Complications, they were reported in 50 (22.7%) patients. 184 (83.6%) of patients stayed at the hospital for only 1 day, while 36 (16. 4%) stayed more than 1 day. Of 36 patients who stayed more than one-day, 34 had complications (p value <0.001).On multivariate analysis, surgical complications was found to be the only predictor of longer LOS (p value <0.001). CONCLUSION: Early nephrostomy tube removal and 1-day length of hospital stay could be a safe option after pediatric PNL. Surgical complications is a statistically significant predictor of longer LOS.

Subtractive versus additive indirect manufacturing techniques of digitally designed partial dentures.

PURPOSE: The purpose of this in vitro study was to evaluate the accuracy of digitally designed removable partial denture (RPD) frameworks, constructed by additive and subtractive methods castable resin patterns, using comparative 3D analysis. MATERIALS AND METHODS: A Kennedy class III mod. 1 educational maxillary model was used in this study. The cast was scanned after modification, and a removable partial denture framework was digitally designed. Twelve frameworks were constructed. Two groups were defined: Group A: six frameworks were milled with castable resin, then casted by the lost wax technique into Co-Cr frameworks; Group B: six frameworks were printed with castable resin, then casted by the lost wax technique into Co-Cr frameworks. Comparative 3D analysis was used to measure the accuracy of the fabricated frameworks using Geomagic Control X software. Student's t-test was used for comparing data. P value ≤ .05 was considered statistically significant. RESULTS: Regarding the accuracy of the occlusal rests, group A (milled) (0.1417 ± 0.0224) showed significantly higher accuracy than group B (printed) (0.02347 ± 0.0221). The same results were found regarding the 3D comparison of the overall accuracy, in which group A (0.1501 ± 0.0205) was significantly more accurate than group B (0.179 ± 0.0137). CONCLUSION: In indirect fabrication techniques, subtractive manufacturing yields more accurate RPDs than additive manufacturing.

Carbamazepine Toxicity Masquerading as Complex Febrile Seizures in a Pediatric Patient.

Carbamazepine is an antiepileptic drug that can cause seizures in overdose. In certain patient populations, this may be misdiagnosed as a seizure disorder. We describe a case of a 20-month-old female who presented with fever and seizure-like activity who was initially thought to have complex febrile seizures. Further historical information prompted carbamazepine level to be checked, which was found to be 29 mcg/ml (therapeutic range of 4-12 mcg/ml). Her carbamazepine levels downtrended with multidose activated charcoal. Her condition improved, and she was discharged without evidence of permanent neurologic sequelae. This case illustrates that xenobiotic exposure should often be considered, even if historical clues are not present, as they can often present as other conditions leading to misdiagnosis and delayed treatment.

Computer guided temporomandibular joint reconstruction of Kaban III hemifacial microsomia with anotia: A case report.

INTRODUCTION, Hemifacial microsomia is the second most common craniofacial congenital anomaly. It corresponds to a group of malformations ranging from minimal facial asymmetry to sever form affecting mandible, soft tissues, orbit, ear, and cranial nerves. PRESENTATION OF CASE, We present a case of 6 years old patient with Kaban class III hemifacial microsomia with anotia. Temporomandibular joint was reconstructed by costochondral graft using computer guided surgery (simulation and rapid prototyping). A computer guided soft tissue guide, mandibular, and maxillomandibular/zygomatic models were constructed using rapid prototyping technology. The customized computer guided soft tissue guide was used to localize the proper position of skin incision, the mandibular model was used for preoperative reconstruction plate bending, and the maxillomandibular/zygomatic model was used to estimate the rib graft length and position. Postoperative assessment showed proper positioning of the graft, with no complications or facial nerve affection. DISCUSSION, In this report, we introduce a new computer guided technique to estimate and identify the proper position of the temporomandibular joint graft based on patient CT. This technique eliminated the need of extended incisions with excessive dissection and provided a more accessible field for rib graft fixation, facilitating the surgical procedures. CONCLUSION, The use of computer guided surgery (simulation and rapid prototyping) for temporomandibular joint reconstruction in Kaban III hemifacial microsomia with anotia facilitates the surgical procedure, minimizes procedure time, increases precision, and reduces possible complications.

Assessment of Osteoimmunological Changes Following Orthognathic Surgery.

BACKGROUND: There is a scarcity in the published literature which evaluates the postoperative inflammatory response and patients' immunity following orthognathic surgery. AIM: The present prospective study aimed to evaluate the changes in two immunological callipers to measure the traumatic effect of orthognathic surgery. METHODS: In the present prospective cohort study, we included women (age range 16-30 years) with severe dentofacial deformities who were scheduled for bimaxillary osteotomy. Blood samples were collected for measurement of transforming growth factor beta one (TGF-ß1) and osteoprotegrin (OPG) levels. The statistical analysis was carried with SPSS software. RESULTS: In the present study, nine patients with severe dentofacial deformity were operated successfully under general anaesthesia. All patients reported decreased energy and fatigue in the early days after surgery and had difficulties with nutrition due to pain, oedema and paresthesia; however, no massive weight loss was reported. The levels of OPG started to increase immediately postoperatively (mean = 0.46 ± 0.08; p = 0.001). A significant increase in the concentration of OPG begun postoperatively and continued to rise significantly until the six weeks to reach 2.24 ± 0.30 ng/mL (p < 0.001). Similarly, the concentration of TGF-ß1 increased at three days postoperatively and continued to rise until the six weeks to reach 1.28 ± 0.19 ng/mL (p <0 .001). CONCLUSION: In conclusion, orthognathic surgery is associated with a significant rise in the pro-inflammatory cytokines until the six weeks postoperatively. These observed results may indicate a significant alteration in the immunity of the patients to undergoing orthognathic surgery.