RESUMO
Aza-fused aromatic π-conjugated networks are an important class of 2D graphitic analogs, which are generally constructed using aromatic precursors. Herein, the study describes a new synthetic approach and electrochemical properties of a self-exfoliating benzotristriazine 2D network (BTTN) constructed using aliphatic precursors, under relatively mild conditions. The obtained BTTN exhibits a nanodisc-like morphology, the self-exfoliation tendency of which is ascribed to the presence of structurally different macrocycles with high electronic repulsion between the layers. The benzotristriazine repeat units of BTTN is electroactive and holds higher carbon/nitrogen ratio when compared with the conventional graphitic aza-fused π-conjugated networks. The self-exfoliated BTTN nanodiscs show excellent electrochemical energy storage of 485 and 333 F g-1 at 1 A g-1 in three-electrode and two-electrode measurements, respectively. BTTN in a symmetric coin-cell architecture exhibits a high specific energy value of 46 Wh kg-1 at a power density of 1 kW kg-1 and shows excellent cyclic stability of 96% for 10 000 and 90% for 30 000 charge-discharge cycles at a higher current density of 5 A g-1, surpassing the device performance of most of the reported all-organic pseudocapacitive 2D networks.
RESUMO
Metallo-supramolecular polymers have gained increasing attention and witnessed continuous development as a vibrant new research interest in the domain of soft materials. These nonconventional polymers have found widespread application in materials and biology owing to their well-defined and diversified topologies and the distinct dynamic nature of the metallosupramolecular interactions against various stimuli. Because of the intriguing redox, photonic, electronic, and magnetic properties, these stimuli-responsive supramolecular structures have attracted considerable interest for optoelectronic device fabrication. However, it still remains challenging to develop stimuli responsive systems with offbeat applications. Furthermore, achieving spatiotemporal control remains elusive with thermoresponsive and sono-responsive metallosupramolecular polymers, which encounter the disadvantage of poor precision control. Additionally, controlling the morphology of these soft materials on the mesoscale, both in solution and on substrates, has many challenges. In this review, we discuss the recent developments and future directions for the construction of stimuli responsive metallosupramolecular systems targeting practical applications. Furthermore, we discuss the synthetic methodologies that have been used to regulate the mesoscale morphology of these materials, such as coordination modulation and pseudomorphic replication. Finally, we briefly cover the burgeoning field of programmed synthesis of metallosupramolecular polymers, emphasizing techniques, such as living polymerization and chemical fuel-driven transiently active systems, which we believe will be the major research directions in the future.
RESUMO
One of the bottlenecks associated with supramolecular polymerization of functional π-systems is the spontaneous assembly of monomers leading to one- or two-dimensional (1D or 2D) polymers without control over chain length and optical properties. In the case of supramolecular copolymerization of monomers that are structurally too diverse, preferential self-sorting occurs unless they are closely interacting donor-acceptor pairs. Herein, it is established that the spontaneous 1D polymerization of a phenyleneethynylene (PE) derivative and the 2D polymerization of a Bodipy derivative (BODIPY) can be controlled by copolymerizing them in different ratios, leading to unusual spindle-shaped structures with controlled aspect ratio, as evident by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM) studies. For example, when the content of BODIPY is 50 % in the BODIPY-PE mixture, the 1D polymerization of PE is significantly restricted to form elongated spindle-like structures having an aspect ratio of 4-6. The addition of 75 % of BODIPY to PE resulted in circular spindles having an aspect ratio of 1-2.5, thereby completely restricting the 1D polymerization of PE monomers. Moreover, the resultant supramolecular copolymers exhibited morphology and aspect ratio dependent emission features as observed by the time-resolved emission studies.
RESUMO
The unique four-level photocycle characteristics of excited-state intramolecular proton transfer (ESIPT) materials enable population inversion and large spectral separation between absorption and emission through their respective enol and keto forms. This leads to minimal or no self-absorption losses, a favorable feature in acting as an optical gain medium. While conventional ESIPT materials with an enol-keto tautomerism process are widely known, zwitterionic ESIPT materials, particularly those with high photoluminescence, are scarce. Facilitated by the synthesis and characterization of a new family of 2-hydroxyphenyl benzothiazole (HBT) with fluorene substituents, HBT-Fl1 and HBT-Fl2, we herein report the first efficient zwitterionic ESIPT lasing material (HBT-Fl2). The zwitterionic ESIPT HBT-Fl2 not only shows a remarkably low solid-state amplified spontaneous emission (ASE) threshold of 5.3 µJ/cm2 with an ASE peak at 609 nm but also exhibits high ASE photostability. Coupled with its substantially large Stokes shift (≈236 nm ≈10,390 cm-1) and an extremely small overlap of excited-state absorption with ASE emission, comprehensive density functional theory (DFT) and time-dependent DFT studies reveal the zwitterionic characteristics of HBT-Fl2. In opposition to conventional ESIPT with π-delocalized tautomerism as observed in analogue HBT-Fl1 and parent HBT, HBT-Fl2 instead shows charge redistribution in the proton transfer through the fluorene conjugation. This structural motif provides a design tactic in the innovation of new zwitterionic ESIPT materials for efficient light amplification in red and longer-wavelength emission.
Assuntos
Fluorenos , PrótonsRESUMO
Diels-Alder photocycloaddition, a well-known textbook reaction, has not been explored in materials chemistry. Herein we describe how this classical photochemistry can be used to modulate the lower critical solution temperature (LCST) of a molecular π-system, which can further be exploited for the controlled transmission of solar radiation for the management of indoor heat and light. An amphiphilic anthracene derivative 9-PA-1 exhibited LCST behavior at 27-32 °C with a reversible transition from a transparent to an opaque phase in water (1-5â mM). Irradiation of a toluene solution of 9-PA-1 with 365â nm light resulted in a [4+2] photocycloadduct 9-PA-2, which exhibited a modulated LCST behavior at 25-27 °C, at a concentration as low as 6â µM. The photocycloaddition of 9-PA-1 was significantly retarded in water, making it a stable candidate for the design of sustainable smart windows. We also demonstrated 100â cm2 smart window prototypes (ΔTlum 82 %, ΔTIR 68 %, ΔTsol 73 %) with more than 1000â cycles of stable operation.
RESUMO
Molecules and materials derived from self-assembled extended π-systems have strong and reversible optical properties, which can be modulated with external stimuli such as temperature, mechanical stress, ions, the polarity of the medium, and so on. In many cases, absorption and emission responses of self-assembled supramolecular π-systems are manifested several times higher when compared with the individual molecular building blocks. These properties of molecular assemblies encourage scientists to have a deeper understanding of their design to explore them for suitable optoelectronic applications. Therefore, it is important to bring in highly responsive optical features in π-systems, for which it is necessary to modify their structures by varying the conjugation length and by introducing donor-acceptor functional groups. Using noncovalent forces, π-systems can be put together to form assemblies of different shapes and sizes with varied optical band gaps through controlling intermolecular electronic interactions. In addition, using directional forces, it is possible to bring anisotropy to the self-assembled nanostructures, facilitating efficient exciton migration, resulting in the modulation of optical and electron-transport properties. In this Account, we mainly summarize our findings with optically tunable self-assemblies of extended π-systems such as p-phenylenevinylenes (PVs), p-phenyleneethynylenes (PEs), and diketopyrrolopyrroles (DPPs) as different stimuli-responsive platforms to develop sensors and security materials. We start with how PV self-assemblies and their coassemblies with appropriate electron-deficient systems can be used for the sensing of analytes in contact mode or in the vapor phase. For example, whereas the PV having electron-deficient terminal groups has high sensitivity toward trinitrotoluene (TNT) in contact mode, the supercoiled fibers formed by the coassembly of self-sorted stacks of C3-symmetrical PV and C3-symmetrical electron-deficient perylene bisimide are capable of sensing vapors of nitrobenzene and o-toluidine. The power of different functional groups in combination with PVs has been further illustrated by attaching CO2-sensitive tertiary amine moieties to a cyano-substituted PV, which allowed the bimodal detection of CO2 using fluorescence and Raman spectroscopy. Interestingly, the functionalization of PVs with terminal amide groups and chiral alkoxy side chains provided a mechanochromic system that allows self-erasable imaging. Whereas PVs exhibit quenching of fluorescence in most cases during self-assembly, PE derivatives exhibit aggregation-induced emission. This property of PEs has been exploited for the development of stimuli-responsive security materials, especially for currency and documents. For instance, the blue fluorescence of a PE attached to hydrophilic oxyethylene side chains coated on a filter paper upon contact with water changes to cyan emission due to the change in the molecular packing. Interestingly, the molecular packing of a Bodipy-attached PE-based gelator allowed a stress-induced change in the emission behavior, resulting in strong near-infrared (NIR) emission upon the application of mechanical stress or gelation. Finally, the use of DPP-based π-systems for the development of NIR transparent optical filters that block UV-vis light and their security- and forensic-related applications are described. These selected examples of the π-system self-assemblies provide an idea of the current status and future opportunities for scientists interested in this field of self-assembly and soft materials research.
RESUMO
Temperature is often not considered as a precision stimulus for artificial chemical systems in contrast to the host-guest interactions related to many natural processes. Similarly, mimicking multi-state volatile memory operations using a single molecular system with temperature as a precision stimulus is highly laborious. Here we demonstrate how a mixture of iron(II) chloride and bipyridine can be used as a reversible color-to-colorless thermochromic switch and logic operators. The generality of the approach was illustrated using CoII and NiII salts that resulted in color-to-color transitions. DMSO gels of these systems, exhibited reversible opaque-transparency switching. More importantly, optically readable multi-state volatile memory with temperature as a precision input has been demonstrated. The stored data is volatile and is lost instantaneously upon withdrawal or change of temperature. Simultaneous read-out at multiple wavelengths results in single-input/multi-output sequential logic operations such as data accumulators (counters) leading to volatile memory states. The present system provides access to thermoresponsive materials wherein temperature can be used as a precision stimulus.
RESUMO
Excited state properties such as emission, exciton transport, electron transfer, etc., are strongly dependent on the shape, size and molecular arrangement of chromophore based supramolecular architectures. Herein, we demonstrate creation and control of distinct supramolecular energy landscapes for the reversible control of the excited-state emission processes through cascade energy transfer in chromophore assemblies, facilitated by an unprecedented solvent effect. In methylcyclohexane, a tailor-made Y-shaped BODIPY derivative self-assembles to form an unusual spherical architecture of 400-1200â nm size, which exhibits a single emission at 540â nm upon 475â nm excitation through a normal excitation deactivation process. However, in n-decane, the same BODIPY derivative forms two-dimensional supramolecular sheets, exhibiting multiple emission peaks at 540, 610, 650, 725 and 790â nm with 475â nm excitation due to cascade energy transfer. Further control on the morphology and excitation energy transfer is possible with variable solvent composition and ultrasound stimulation, resulting in enhanced near-infrared emission with an overall pseudo Stokes shift of 7105â cm-1 .
RESUMO
Poor control on the exfoliation of covalent organic frameworks (COFs) remains a disadvantage for their application as two-dimensional nanosheets. An equally important problem is the reversible control at the available surface charges on COFs. Herein, a strategy for the reversible exfoliation, re-stacking, and surface-charge control of a propidium iodide based ionic covalent organic framework, PI-TFP, using cucurbit[7]uril (CB[7]) induced molecular recognition, is reported. The surface charge on PI-TFP facilitates its initial self-exfoliation. However, complexation with CB[7] resulted in re-stacking with concomitant decrease in zeta potential from +28±3.0 to +0.004±0.003â mV. Addition of 1-adamantylamine hydrochloride (AD) facilitates decomplexation of PI-TFP from CB[7], resulting in exfoliation and an increase in zeta potential to +24±3.0â mV. Such control on the exfoliation, re-stacking, and the associated regulation of the surface charge in PI-TFP was exploited for controlling bacterial growth. Thus, the activity of E. coli and S. aureus bacteria obtained with the self-exfoliated PI-TFP could be reversibly controlled by the CB[7]/AD pair.
Assuntos
Hidrocarbonetos Aromáticos com Pontes/química , Hidrocarbonetos Aromáticos com Pontes/farmacologia , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Imidazóis/química , Imidazóis/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimento , Amantadina/química , Relação Dose-Resposta a Droga , Propídio/química , Propriedades de SuperfícieRESUMO
Diels-Alder photocycloaddition of 9-phenylethynylanthracene results in multiple [4 + 2] and [4 + 4] cycloaddition products in solution, which can be controlled to form specific products under a restricted environment. We have exploited the gel phase of a 9-phenylethynylanthracence derivative as a confined medium to specifically yield the [4 + 2] cycloadduct in >90% yield. The photocycloadduct ( anti-form) exhibited a blue emission with CIE chromaticity of x = 0.16/ y = 0.16. Construction of an organic light emitting device with the photocycloadduct, using a carbazole-based hole transporting host, resulted in white light emission with a CIE chromaticity of x = 0.33/ y = 0.32. This observation not only highlights the use of gel chemistry to achieve the otherwise difficult to obtain photoproducts but also underlines their potential in optoelectronic device fabrication.
RESUMO
Organelle-targeted photosensitizers (PSs) having luminescence properties are potential theranostic agents for simultaneous luminescence imaging and photodynamic therapy. Herein, we report a water-soluble luminescent cyclometalated IrIII complex, Ir-Bp-Ly, as a lysosome-targeted theranostic probe. Ir-Bp-Ly exhibits exceptional photophysical properties, with good triplet-state quantum yield (0.90), singlet oxygen generation quantum yield (0.71 at pHâ 4), and long lifetime (1.47â µs). Interestingly, Ir-Bp-Ly localizes mostly in lysosomes due to the presence of morpholine units, suggesting its potential use as a lyso-tracker. Ir-Bp-Ly displays a notable PDT effect in C6 glioma cells, efficiently generating reactive oxygen species owing to close proximity between the energy levels of its triplet state and those of molecular oxygen (3 O2 ). The mechanism of cell death has been studied through caspase-3/7 and flow cytometry analyses, which clearly established the apoptotic pathway.
Assuntos
Complexos de Coordenação/química , Irídio/química , Lisossomos/metabolismo , Fármacos Fotossensibilizantes/química , Apoptose/efeitos dos fármacos , Apoptose/efeitos da radiação , Caspase 3/metabolismo , Caspase 7/metabolismo , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Complexos de Coordenação/farmacologia , Complexos de Coordenação/uso terapêutico , Técnicas Eletroquímicas , Glioma/tratamento farmacológico , Glioma/metabolismo , Glioma/patologia , Humanos , Lasers , Luz , Lisossomos/efeitos dos fármacos , Fotoquimioterapia , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/uso terapêutico , Teoria Quântica , Oxigênio Singlete/química , Oxigênio Singlete/metabolismoRESUMO
Ionic covalent organic nanosheets (iCONs), a member of the two-dimensional (2D) nanomaterials family, offer a unique functional platform for a wide range of applications. Herein, we explore the potential of an ethidium bromide (EB)-based covalent organic framework (EB-TFP) that self-exfoliates in water resulting in 2D ionic covalent organic nanosheets (EB-TFP-iCONs) for the selective detection of double-stranded DNA (dsDNA). In an aqueous medium, the self-exfoliated EB-TFP-iCONs reassemble in the presence of dsDNA resulting in hybrid EB-TFP-iCONs-DNA crystalline nanosheets with enhanced fluorescence at 600â nm. Detailed steady-state and time-resolved emission studies revealed that the reassembly phenomenon was highly selective for dsDNA when compared to single-stranded DNA (ssDNA), which allowed us to use the EB-TFP-iCONs as a 2D fluorescent platform for the label-free detection of complementary DNA strands.
Assuntos
DNA/análise , Etídio/química , Estruturas Metalorgânicas/química , Nanoestruturas/química , Etídio/síntese química , Substâncias Macromoleculares/síntese química , Substâncias Macromoleculares/química , Estruturas Metalorgânicas/síntese química , Estrutura Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Direct monitoring of apoptotic progression is a major step forward for the early assessment of therapeutic efficacy of certain treatments and the accurate evaluation of the spread of a disease. Here, the regulatory role of glutathione (GSH) is explored as a potential biomarker for tracking apoptosis. For this purpose, a near- infrared (NIR) squaraine dye is introduced that is capable of sensing GSH in a ratiometric manner by switching its emission from NIR (690â nm) to visible region (560â nm). The favorable biocompatible attributes of the probe facilitated the real-time monitoring of apoptotic process in line with the conventional apoptotic assay. Furthermore, the robust nature of the probe was utilized for the quantitative estimation of GSH during different stages of apoptosis. Through this study, an easy and reliable method of assaying apoptosis is demonstrated, which can provide valuable insights in translational clinical research.
Assuntos
Apoptose , Ciclobutanos/química , Corantes Fluorescentes/química , Glutationa/análise , Imagem Óptica/métodos , Fenóis/química , Células 3T3-L1 , Animais , Células Hep G2 , Humanos , Raios Infravermelhos , Camundongos , Microscopia de Fluorescência/métodos , OxirreduçãoRESUMO
The design of fluorescent molecular platforms capable of responding to multiple analytes is a topic of great interest. Herein, the use of a Zn2+ -complexed unsymmetrical squaraine dye, Sq-Zn2+ , as a chemical platform for recognizing structurally distinct analytes is reported. The squaraine ring is substituted on one side with a dipicolylamine unit, which acts as the metal ion receptor, whereas the other part of the molecule carries a dibutylaniline moiety, which is an electron donor. The molecular system is unique because it can respond specifically to different types of analytes, namely, atmospheric carbon dioxide, cyclic phosphates, and picric acid. Moreover, the interaction of these analytes can be monitored colorimetrically and fluorimetrically, which favors both qualitative and quantitative analyses. The distinct response towards cyclic and linear phosphates, as well as the selective response towards picric acid, among the various nitroaromatic compounds was achieved with sensitivity at the ppm level. The flexible coordination offered by Zn2+ plays a significant role in the discrimination of these analytes with high specificity. Dye Sq-Zn2+ introduced herein is a single-molecule construct that can be used for the selective and sensitive response towards analytes of environmental and biological relevance.
Assuntos
Ciclobutanos/química , Corantes Fluorescentes/química , Fenóis/química , Dióxido de Carbono/análise , Colorimetria , Ciclobutanos/síntese química , Corantes Fluorescentes/síntese química , Espectroscopia de Ressonância Magnética , Fenóis/síntese química , Fosfatos/análise , Picratos/análise , Termodinâmica , Água/química , Zinco/químicaRESUMO
Novel heteroleptic cyclometalated platinum(ii) complexes consisting of 5'-benzoylated 2-phenylpyridinate (ppy) cyclometalated and acetylacetonate ancillary ligands were synthesized, and their photoluminescence (PL) properties were investigated. The 5'-benzoylated complex without any other substituents exhibited phosphorescence-based monomer emission at 479 nm in dichloromethane (10 µM, rt) with a PL quantum yield of 0.28. On the other hand, in poly(methyl methacrylate) (PMMA) film, remarkable excimer emission additionally emerged at ca. 600 nm with a relatively high PL quantum yield of 0.47 as the doping level increased to 0.20 mmmol g-1, which was comparably intense in comparison with the monomer emission. In the case of the complexes with unsubstituted, 4'-benzoylated, and 5'-fluorinated ppy cyclometalated ligands, excimer emission was modestly generated at the same doping level, and thus the introduction of a benzoyl group to the 5'-position is effective to obtain remarkable excimer emission. The combination of benzoyl and fluoro groups was more effective at inducing excimer emission, and the intensity of excimer emission of the 2-(5-benzoyl-4,6-difluorophenyl)pyridinate-based complex was 3.5 times larger than that of monomer emission at a doping level of 0.20 mmmol g-1 in PMMA. From the analysis of PL lifetimes at varying concentrations, photokinetic profiles were fully analyzed according to the model system for the irreversible excimer formation, and the excimer formation rate constant of the 5'-benzoylated complex was determined in dichloromethane as 2.2 × 109 M-1 s-1, which is 4.4 times larger than that of the unsubstituted complex. We also fabricated an organic light-emitting diode using the 2-(5-benzoyl-4,6-difluorophenyl)pyridinate-based complex as a single emitter. The device exhibited pseudo-white EL with the Commission internationale de l'éclairage chromaticity coordinates of (0.42, 0.42).
RESUMO
Functional differences between superhydrophobic surfaces, such as lotus leaf and rose petals, are due to the subtle architectural features created by nature. Mimicry of these surfaces with synthetic molecules continues to be fascinating as well as challenging. Herein, we demonstrate how inherently hydrophilic alumina surface can be modified to give two distinct superhydrophobic behaviors. Functionalization of alumina with an organic ligand resulted in a rose-petal-like surface (water pinning) with a contact angle of 145° and a high contact angle hysteresis (±69°). Subsequent interaction of the ligand with Zn2+ resulted in a lotus-leaf-like surface with water rolling behavior owing to high contact angle (165°) and low-contact-angle-hysteresis (±2°). In both cases, coating of an aromatic bis-aldehyde with alkoxy chain substituents was necessary to emulate the nanowaxy cuticular feature of natural superhydrophobic materials.
RESUMO
The synthesis of three cyano-substituted divinylene π-gelators is reported. The modulation of the color is achieved by placing the cyano groups in appropriate position of the conjugated backbone, thus modulating the donor-acceptor interaction. Variable-temperature UV-vis data have been utilized to investigate the self-assembly of the gelators 1-3 that is governed by a cooperative mechanism. A complete set of photophysical parameters (ΦF,τ, kr and knr) demonstrate the role of the molecular aggregation in enhanced emission upon self-assembly.
RESUMO
In an attempt to gather experimental evidence for the influence of carbon allotropes on supramolecular chirality, we found that carbon nanotubes (CNTs) facilitate amplification of the molecular chirality of a π-gelator (MC-OPV) to supramolecular helicity at a concentration much lower than that required for intermolecular interaction. For example, at a concentration 1.8×10(-4) m, MC-OPV did not exhibit a CD signal; however, the addition of 0-0.6â mg of SWNTs resulted in amplified chirality as evident from the CD spectrum. Surprisingly, AFM analysis revealed the formation of thick helical fibers with a width of more than 100â nm. High-resolution TEM analysis and solid-state UV/Vis/NIR spectroscopy revealed that the thick helical fibers were cylindrical cables composed of individually wrapped and coaxially aligned SWNTs. Such an impressive effect of CNTs on supramolecular chirality and cylindrical-cable formation has not been reported previously.
RESUMO
Molecular assemblies and gels made up of fluorescent π-systems through noncovalent interactions are fascinating materials with a wide range of properties and applications. Fluorescence is an extremely sensitive property, which gets perturbed upon molecular self-assembly and gelation. Further manipulation of fluorescence in such materials is possible with external stimuli, such as stress, temperature, or with different analytes. Explosives are a class of analytes that respond to certain fluorescent molecular systems; thus allowing their sensing in a required environment. In recent times, this research has become a topic of great demand, resulting in a large number of publications, due to their relevance in safety and security issues. In this account, we record some of the major developments in the field of explosive sensing with fluorescent molecular assemblies and gels.
RESUMO
Oligo(phenylenevinylene)s (OPVs) are extensively investigated π-conjugated molecules that exhibit absorption and fluorescence in the UV-Vis spectral region, which can be widely tuned by chemical functionalisation and external control (e.g. solvent, temperature, pH). Further modulation of the optoelectronic properties of OPVs is possible by supramolecular aggregation, primarily driven by hydrogen bonding or π-stacking interactions. In recent years, extensive research work has been accomplished in exploiting the unique combination of the structural and electronic properties of OPVs, most of which has been targeted at the preparation of molecules and materials featuring photoinduced energy transfer. This review intends to offer an overview of the multicomponent arrays and self-assembled materials based on OPV which have been designed to undergo energy transfer by means of a thorough choice of excitation donor-acceptor partners. We present a few selected examples of photoactive dyads and triads containing organic moieties (e.g. fullerene, phenanthroline) as well as coordination compounds (Cu(I) complexes). We then focus more extensively on self-assembled materials containing suitably functionalised OPVs that lead to hydrogen bonded aggregates, helical structures, gels, nanoparticles, vesicles, mesostructured organic-inorganic hybrid films, functionalised nanoparticles and quantum dots. In most cases, these materials exhibit luminescence whose colour and intensity is related to the efficiency and direction of the energy transfer processes.